Asus P5AD2 results.... (2.8 w/ Centon DDR2)

[quicksilverXP]

Here are some results taken stock with this board. Timings for SPD were 5-4-4-15, but I changed them to 4-4-4-12 to match the normal timings of other manufacturers.

Chips were 2x512MB single-sided Elpida chips. All tested with Intel stock cooling as well as an 80mm fan over the NB and ram.

http://centon.infopop.cc/evefiles/photo_albums/3/5/6/3560005952/1160005952_CF759CC0B826D0D7893AB866A56483FA.bmp
http://centon.infopop.cc/evefiles/photo_albums/3/5/6/3560005952/3160005952_020C197788551404797E4708AE4B7B6B.bmp
http://centon.infopop.cc/evefiles/photo_albums/3/5/6/3560005952/2160005952_C74D99D468B19C41997DD24E8E0B8E02.bmp

Post back with overclock results.

[quicksilverXP]

Here are the overclocked results. The odd part is I can overclock to 345 MHz DDR fine, but my Super Pi score lowers to 45 seconds, yet it passes Prime 95. I'm hoping Asus will release a BIOS update for more vdimm.

Also, I've noticed at 340 that my Superpi will range from 37 - 39s, so I think that it isn't entirely stable yet, although it still passes Memtest and Prime. I'll try more.

http://centon.infopop.cc/evefiles/photo_albums/3/5/6/3560005952/4160005952_3009108230F7DA2D9917918528A1B1EF.bmp

http://centon.infopop.cc/evefiles/photo_albums/3/5/6/3560005952/5160005952_28DFB3710A7E2775F167E92149CFCA2E.bmp

http://centon.infopop.cc/evefiles/photo_albums/3/5/6/3560005952/6160005952_E92E328A70C35F9948113A9F1E55538D.bmp

[skate2snow]

Normally the BIOS wont help to raise Vdimm since the resistance are too high from setting of droop. You will need a Vdimm mod to raise the VDimm....

[quicksilverXP]

Haha... yeah I know.... that was wishful thinking... especially with Asus. I can't really try any vmods til I get better cooling.

[althes]

not bad.