PDA

View Full Version : Recent Pull


JAWS
10-12-2002, 04:15 PM
Hey |PuNiSh3R|, I finally got those pics. This is the unit I was trying to explain to you.

Tecumseh AE4430AL (AEA4430AXA) 1/4hp
Originally R12

Anyone? Does is seem okay? Are the 2 valves on the left side okay? What about the Phillips cap?

Sorry I couldn't fit them in the thread:

http://www.picturetrail.com/gallery/view?p=999&gid=1246278&uid=730066&members=1
JAWS
10-12-2002, 04:16 PM
Here it is:
JAWS
10-12-2002, 04:17 PM
top:
JAWS
10-12-2002, 04:19 PM
one more
|PuNiSh3R|
10-12-2002, 06:04 PM
Hmm.. I couldn't say what those valves are really.. other then access valve and looks like they come from the condenser.. does the compressor go into the condenser directly? I am thinking that they might be for the evaporator hook up.. not sure tho.. I can't really see where they go to well.. The system looks good and that condenser looks damn big.. but maybe it's just the shroud over it.. Over all I'd say it should do damn good in direct die or water chilling with the correct cap tube..
JAWS
10-12-2002, 06:24 PM
Originally posted by |PuNiSh3R|
Hmm.. I couldn't say what those valves are really.. other then access valve and looks like they come from the condenser.. does the compressor go into the condenser directly?

Yes!

Top view: the line on the right goes from compressor to condenser.

The last pic: The valve (I don't know if I'd call it that?) on the left is the suction and connected to the compressor. The one on the right is connected to the condenser. That one I feel air blowing out of when turned on.

I think the fill valve is mounted on the side right next to the fan (from top view)
|PuNiSh3R|
10-12-2002, 06:27 PM
Heh.. see you just figured it out yourself :) One of those valves is the suction the other the discharge.. anywho can you give me a better pic of the valve you think is the fill valve..
JAWS
10-12-2002, 06:36 PM
Originally posted by |PuNiSh3R|
Heh.. see you just figured it out yourself :) One of those valves is the suction the other the discharge.. anywho can you give me a better pic of the valve you think is the fill valve..

This is as good as I can get tonight. I'll see if he can bring his cam tomorrow.
|PuNiSh3R|
10-12-2002, 09:47 PM
Ya i see what u are talking about.. just can't really "see" it...
aenigma
10-12-2002, 11:04 PM
Yup that is a low side port, looks like the "valves" for dischare/suction also have schraders...
Flare fitting are your friend here...
|PuNiSh3R|
10-13-2002, 07:15 AM
But O'God aenigma.. aren't flare fittings always your friend? PRAISE ALLAH!