View Full Version : Pifast Benchmark
Pages :
[
1]
2
3
4
5
6
7
8
Well a few of us over at OCUK have been running the Pifast bench recently so I set up a quick website to submit scores.
If anyone wants to download the bench to try it is available here: http://img.hexus.net/hexus_pifast.rar (batch file for settings included)
The site is here: http://www.thechimpcage.com/pifast/
If you want to see out thread it is here: http://forums.overclockers.co.uk/showthread.php?threadid=206939
Hope some of you give it a try, Pedro Rocha is top right now with a 3.57gig P4 on an IT7-Max2 with mem @ 227mhz/
c7775
10-10-2002, 06:02 AM
where on earth is MR LIAR ??????????
BTW i replied to your Q in OCUK forums mate :)
Yeah Mr Liar took a running jump :p
Come on people :)
c7775
10-10-2002, 07:22 AM
mate are you limited by your rimms at 177X3 ?
Cause if thats so then i can laugh at you since mine
do 216X3 but my cpu craps out at 154Fsb (at 1.6V)
So whos laughin in the end :rolleyes:
Nope they go furter, I'm CPU limited about 180mhz FSB. 177 is my normal stable speed.
My RIMMS can do 145 4x, so 193 3x.
c7775
10-10-2002, 07:38 AM
Originally posted by KAIN
Nope they go furter, I'm CPU limited about 180mhz FSB. 177 is my normal stable speed.
My RIMMS can do 145 4x, so 193 3x.
K i see. My RIMMS can do up to 160X4 with the volt mod but the cpu is a piece of sh*t and will not do even that much :stick: . But its a very nice mobo and it used to belong to Orifice. He has done an exceptional job on the mods especially the drcgs :)
Yeah, I'm planning to sell my TH7 fairly soon.
Have to see whats around and find a buyer for it first as well.
PiLsY
10-10-2002, 07:57 AM
Done :).
sysfailur
10-10-2002, 08:38 AM
I've done this one..... I dunno if they're the same. This was a while back, if my AMD HD wasn't fried, I'd fire it up @ 2.1ghz ;)
http://www.maximumoc.com/img/hardware/epox_2/tbred/2812/54seconds_superpi.jpg
NoStra
10-10-2002, 09:05 AM
I get 1minute and 18secs with a duron@1300Mhz! Not bad I think...
PiLsY
10-10-2002, 09:07 AM
Nope not the same sys :).
I get 43 seconds on the 1M super pi test :). Youre probably looking at about 73 seconds for pifast with the above super pi score. Maybe 67 or so @ 2100mhz :p.
PiLsY.
NoStra
10-10-2002, 09:12 AM
Originally posted by NoStra
I get 1minute and 18secs with a duron@1300Mhz! Not bad I think...
That is with Super pi 1M
As Pilsy said different I'm afraid, if you do run it it will only take a couple of minutes to put a score on :)
Hiwayman
10-10-2002, 09:41 AM
I got 44sec for the 1M Super pi test, but I can't show you coz my system died soon after:(
But A new Prometeia is on the way to replace the dead one:)
Pedro Rocha
10-10-2002, 12:18 PM
Originally posted by PiLsY
Done :).
60.61 PiLsY P4 2800 3585 IT7 228 2-7-3-2-Enhance Prometia XP
60.63 Pedro Rocha P4 2800 3577 Abit IT7-Max2 227MHz 2-7-3-2 Prometeia WinXP
PiLsY
Dam ..you just beat my score for 00,02 seconds :rolleyes:
Going to try to break the 60 Seconds barrier tonight...
:toast:
PiLsY
10-10-2002, 02:14 PM
Hehe I know ;).
You equalled my prev score so I thought Id re-run it without downloading at the same time :p.
Go on m8 - go for more :).
besides - im dying to try it without mbm, winamp, soundcard mixer, printer utility, scanner utility and USB monitors running :p. May even disable the via usb chip for you - got 7 devices running off it atm. Reckon I could maybe crack 60.2, but I doubt below 60 is possible without upping the FSb by around 2 or 3mhz.
Race you to below 60 seconds :D.
PiLsY.
PiLsY
10-10-2002, 02:42 PM
Done :).
3622mhz, USB disabled, IDE channels disabled, FDD disabled, all taskbar programs disabled via msconfig and taskbar itself disabled, plus a few other tweaks (cant give ALL my secrets away can I?). Basically ran in my 3dmark config but managed 1mhz more fsb than I can 3dmark at :).
Pedro Rocha
10-10-2002, 05:29 PM
Congratulations PiLsY you Win the Pifast Benchmark !! ;)
Even with USB disabled the maximum my Corsair go is 228 but only at Cas 2.5.
With this speed the better I can do is 60:52
In fact Cosair only warrant this memory for 200mhz (400DDR) at Cas 2.5 ..so not bad the extra 28mhz (456DDR).
What memory sticks are you using??
:toast:
PiLsY
10-11-2002, 01:20 AM
Winbond BH-5 chips on a 3rd party Apacer PCB. Its not even a 6-layer CPB :). So much for Corsair huh?
Mines only guaranteed to 2.5/6/3/3 @ 200mhz (true DDR400), but can actually go all the way to 240mhz on a decent board.
Im looking for a stick to match it now in preparation for the dual ddr boards.
PiLsY.
Nice result Pilsy, very impressive!
Way to go, put it online as well!
Cheers MrIcee for the result, as usual fastest AMD rig :p
MrIcee
10-12-2002, 02:41 PM
Thank you Kain:)
Couldn't resist seeing what the 2200+ XP would do in comparo. I await a rev b T-bred and will run your bench again at a more favorable CPU speed and see how AMD fares.:) Very nice bench .bat by the way..cheers !
Randi:D
Yeah I wanna see your results with a new XP, Rys result is pretty good considering that is a stock XP2700+.
MrIcee, nice one breaking my AMD score to go fastest AMD so far :) I was hoping for <70s but it wasn't happening on that motherboard (no fsb choices other than 133 and 166 worked) so I had to restort to ram timing tweaks.
Well done PiLsY for < 60s. Nice to see the Xtreme guys playing too :)
Rys
Rys,
Welcome to Xtreme :)
MrIcee,
Nice score! :D
Nice result to Jeff :D
Just behind MrIcee, you can take him :p
So wheres your score [N8]??? :confused:
PiLsY
10-12-2002, 05:06 PM
Cheers :).
Working on a sub 59 now. Got it a bit lower so far, not gonna bother sticking the result up until im under 59s though :).
Cmon pedro - dont tell me youve given up already? :D.
You as well Opp - no excuse, it only takes 60 seconds (or less :p) and I know damn well you can beat me :D.
Nice result with that nforce2 board rys - shame about the FSB options though. Which particular board was that on? Asus by any chance?
PiLsY.
Got it in one I believe PiLsY on the ASUS I believe :p
MrIcee
10-12-2002, 06:36 PM
Rys and N8:)
Thanks guys...I believe only better is yet to come from the AMD guys:D
Randi:D
EDIT: You AMD guys running WinXP are handicapping yourselves, XP has a tendency on an AMD system to suck the bandwidth down severly. Witness Car and Lobby in 3DMark2001, in which an identical system and settings running XP, 98 and 2000 put Win 2000/SP2 ahead of the other 2 in FPS. Just an observation on my part but the switch made a tremendous difference for me in bandwidth.
Thanks for the tip Mr. Icee. I'm installing Win2k on one of my systems right now to see if it helps with this PiFast benchmark as well as my SETI@home benchmark.
:toast:
The more people posting the better :D
Originally posted by PiLsY
Cheers :).
Nice result with that nforce2 board rys - shame about the FSB options though. Which particular board was that on? Asus by any chance?
PiLsY.
Yeah, A7N8X. I had 180fsb working for a morning the day after I got the board, 2333MHz and 180MHz mem @ CL2.0, 2-2-2 would have flown.
Ah well, I'll pester AMD for another system to play with for a wee while, hopefully they'll oblige :)
Should be someone else under 60s soon I think too ;)
Rys
EDIT: MrIcee, thanks for the tip about Win2K :) I'll be sure to install it if AMD let me have another CPU or box for a while! Fingers crossed :D
Originally posted by KAIN
Nice result to Jeff :D
Just behind MrIcee, you can take him :p
:doh: :D
I added your new result this morning :p
Originally posted by KAIN
So wheres your score [N8]??? :confused:
KAIN,
Hehe :)
I've actually never run that bench before. I'm smack in the middle of working out any bugs in my new H2O setup, as well as unlocking a new 1600+ that I purchased and was able to hit 2100MHz w/ on air(not stable). I've got my original 1600+ clocking higher than it ever has now w/ the water, so I'm very confident in the clocks I'll be able to hit w/ this new chip once its unlocked. When I'm finished w/ all this stuff I've been doing in the past couple weeks PC-wise(been hectic) I definitely need to do some benching as I haven't run 3DMark since the 29.17 Detonators, and I've got better cooling on both my CPU & GPU now :)
P.S. Also been folding 24/7 for our team as it appears we are in a fierce 3-way battle to the top :D
So, I've sorta been doing my part...slacking nonetheless tho ;)
MrIcee
10-14-2002, 10:50 AM
Great job Jeff..congrats:toast:
I'll attempt to move up once I get some new hardware in my hands someday:)
Randi:D
Originally posted by MrIcee
Great job Jeff..congrats:toast:
I'll attempt to move up once I get some new hardware in my hands someday:)
Randi:D
It will be a pleasure getting "smacked down" by someone like yourself. ;) Considering it took me a 2400 to squeek by your 2200 I look forward to your new hardware too.
sysfailur
10-15-2002, 06:58 PM
Ran the best I could aircooled... 2322mhz @ 154mhz fsb.
Now I wanna see your TEC result :D
sysfailur
10-16-2002, 10:01 AM
Originally posted by KAIN
Now I wanna see your TEC result :D
Sure... just need a new power supply! I still have it all set up and rarrin to go ;)
zteve
10-16-2002, 10:15 AM
Hi everybody,
this is using 2400+@2400(201*12)
edit: change a new picture, with better result
docah
10-16-2002, 10:38 AM
Mulling over the ##'s it looks like it will take an amd @ 200fsb about 2.75 ghz of speed to over run a p4 running pilsy's 3.6 p4 and memory. sysfailur is the closest.. erm was :) (2.6+)
Well zteve is now #1 AMD system :D
I edited your score zteve to put that time in :)
I'd agree around 2.7-2.8gig is gonna beat the 3.6gig P4's
zakelwe
10-16-2002, 01:37 PM
Well , I top the table. If you are Australian and looking at it upside down of course. :)
I just did my home machine and got my XP1600@1660MHz to 96.00 seconds.
My friend at work has a 2.53GHz P4 running in a Dell ( presumably a 845 motherboard ) and he took 141 seconds. This seems awfully slow ...
Interestingly, he thinks it's pretty fast, as I told him the score of the PIII at 650Mhz. :eek:
Regards
Andy
Hehe, P4's stock with memory at 133mhz are not the fastest machines ever ;)
sysfailur
10-16-2002, 05:07 PM
Just got 66.96 @ 2.5ghz... will post later...
http://www.adventurevision.com/somepictures/6655.gif
Little bit cooler tonight so I could push just a little harder. ;)
sysfailur
10-16-2002, 06:25 PM
Heh, well here's my next two best... Funny thing, out of no where my multiplier changed to 7.... so I was like... ehh, wtf? And I tried changing it and it worked!!!! So apparently my cpu is unlocked now! hahah Anyway, the first pic is before unlock, and the 2nd one is after. Notice that I'm like 35mhz slower, but my fsb is juiced up, and the scores are about the same. This tells you that the overall score is more strictly mhz it seems....
EDIT: KAIN, please delete my other score and slap the one I just submitted up instead ;)
http://www.maximumoc.com/img/hardware/2400+/2500_mhz_hexus_pi.jpg
http://www.maximumoc.com/img/hardware/2400+/hexus_pi_6696.jpg
Hey sysfailur, try running the benchmark two times in a row, one right after the other. For some reason when I do this my second score gets better.
Well big fight going on for #1 AMD spot :D
Jeff's taken it again hehe
zteve
10-17-2002, 03:10 AM
my new score with 203*12
sysfailur
10-17-2002, 01:25 PM
Oh boy..... watch out, my awesome power supply is here. Time for 2.6+ ghz!
sysfailur
10-17-2002, 04:19 PM
Omg, I'm getting so frustrated. My temps are perfectly fine @ 2.5ghz--I'm doing 216x11.5 (approximately) and It goes to "Series computing time: 52.04" is what I've been getting, and then the damn thing doesn't go any further but continues to "think" but it never finishes. Have I broke the program or something? I mean I can cancel it, and then try it again and it goes to the same spot and stops! ARGH! I would have an amazingly fast score!
I just did some theoretical calculating, and it would seem that if i was getting 52.04, I would get an overall time of 65.34 approximately. >_< If you want I can screencap it no problem, but it just won't go past the "Series computing time".
Is your computer stable?
I've had that happen when I was pushing a bit too far. Just scale back 1MHz and see what happens.
I found that happen either on too extreme timings or slightly too high overclock.
sysfailur
10-17-2002, 07:41 PM
I don't understand why it would hang though in the same spot, I mean I'd really like to get it to go at that speed. Going back defeats the purpose heh. I can run all sorts of stuff at this speed, but this benchmark refuses to go past that spot for some reason. :\
MrIcee
10-17-2002, 10:00 PM
Because your system is not stable enough to complete the bench at that speed. Period. I found the same thing, my friend, with my own system, you have to back off a Mhz at a time until it completes the bench:)
Randi:D
sysfailur
10-18-2002, 07:40 AM
Originally posted by MrIcee
Because your system is not stable enough to complete the bench at that speed. Period. I found the same thing, my friend, with my own system, you have to back off a Mhz at a time until it completes the bench:)
Randi:D
Well then this benchmark must have a magical ability to utilize the cpu more than super_pi and seti@home combined together. I'm tellin ya, my comp. is stable at that speed. My temps are fine, but it won't complete it. When my comp isn't stable it will get to like maybe 4 or 5 and then say "pi error". That happens all the way up from 2525 up to 2600. I think the cpu needs some more juice is what I think :P
Try running a little Prime95 on your system. I've noticed that I can get SuperPi to run even when my computer isn't 100%. I think SuperPi is a good test, then this PiFast is the next step, and then Prime95 is kinda like the torture test for your processor and memory. ;)
What kind of times are you getting when you scale back 1MHz? It's got to be better than the current AMD high, right?
sysfailur
10-18-2002, 01:42 PM
Originally posted by Jeff
Try running a little Prime95 on your system. I've noticed that I can get SuperPi to run even when my computer isn't 100%. I think SuperPi is a good test, then this PiFast is the next step, and then Prime95 is kinda like the torture test for your processor and memory. ;)
What kind of times are you getting when you scale back 1MHz? It's got to be better than the current AMD high, right?
Well I did lots of benching today... and b/c I got so pissed at my 2400+/8k5a3+.... (it decided not to give me multipliers again today) I decided to teach my mobo a lesson and in windows I upped my FSB to 337mhz, and in the process fried the 85ka3+. I am not saddened at all by this loss. The motherboard was asking for it. I then decided since it was fried to try the 2400+ on my KD7 motherboard. The proc, ram, and everything else attached to the 8k5a3+ is fine, _AND_ the multipliers ALL work on the KD7. So apparently the 8k5a3+ doesn't support jack sh*t--at least w/ or w/o the 5th L3 connected.
So after I tested all that I then decided to play w/ my p4... I pin modded it, got it up to 3060, and put my 4200 on the p4, and achieved the 14th best 4200 score. *Twirls flag* (Will post more on this in the 3dmark forum later).
So anyway, out of this I have learned that the 2400+ and 8k5a3+ is not a good combo. I'm going to pick up a AT7-MAX2 instead and use that.
PiLsY
10-18-2002, 02:00 PM
FYI -
The pifast benchmark stresses MUCH more than seti and super pi. You need ot be able to complete at least a 32m pi test to match the pifast bench for stability. It also pushes temps much lower than super pi. The only thing that hits the temps even more than pifast is seti at the very start of a work unit. However, the pifast test seems to hit the cpu harder despite this.
Remember as well that seti will run all the same even if your results are getting corrupted. Its only in extremely unstable circumstances that seti will cause a crash.
A few other good stability tests -
My first choice is always memtest. This proggy is awesome. Leave test 4 looping to hammer your cpu or test 5 to hammer your memory. If you can loop either for 3 hours or more youre totally stable.
Folding - Better for burning in than stability testing due ot the time involved.
Games - total annihalation to hammer the cpu. This proggy is very succeptible to crashes if your cpu is clocked too hard. Jedi Knight - Outcast - again hammers the cpu very hard.
DVD ripping - hammers the memory more than cpu, but works both hard. A very good cimbination for burning in is to loop test 4 on memtest for 3 hours, test 5 for 3 hours, rip a dvd then complete a folding unit. After that you should gain a fair amount. First run of the above youll get 1 maybe 2mhz. After that the time at which your mhz increases decreases. It may take several loops of the whole process above to gain a single mhz after a while. Generally speaking your first week gains you 5mhz, second week 3mhz, 3rd week 1mhz then every 2 weeks to a month or so thereafter for a single mhz. Dont forget that cpus are tending to show less and less increase in speed form burning in nowadays.
PiLsY.
bigdawginva
10-20-2002, 07:10 AM
Interesting thread. I had not heard of Pifast until I read about it in the Prometia article. I'm going to start using it for stability testing.
zakelwe
10-20-2002, 11:40 AM
On the issue of stability and what to test for then I always run CPUMark99
Why cpumark99 ? Well, if it doesn't run this then it aint going to run any other benchmark successfully. It only takes 30 seconds to run and immediately gives you an indication if your BIOS / jumpers are not quite right.
Someone emailed me the other day that cpumark99 was outdated, but it can't be because it scales exactly like the cpu PCMark scores do, so if you get a 10% increase on cpumark99 then you do on PCMark !
And it takes a lot less time to run.
Regards
Andy
Svenn
10-20-2002, 01:07 PM
78.11 seconds with the specs below at 169x12 = 2032Mhz. Submitted my results. :)
Caprid
10-20-2002, 01:37 PM
Oooh a new game to play. Here's my contribution.
http://caprid.homestead.com/files/pi66.03.jpg
12x198 on a 2400+
:cool:
sysfailur
10-20-2002, 07:27 PM
Originally posted by Caprid
Oooh a new game to play. Here's my contribution.
[img]http://caprid.homestead.com/files/pi66.03.jpg[/
12x198 on a 2400+
:cool:
Which mobo?
Caprid
10-20-2002, 08:06 PM
Have it in a KD7.
JCviggen
10-21-2002, 03:53 AM
Thought i'd join in on the fun :)
http://users.pandora.be/JCviggen/pifast.JPG
NoStra
10-21-2002, 04:05 AM
There is JC...and crushes everyone...again :)
Originally posted by JCviggen
Thought i'd join in on the fun :)
Yikes, nice one JC :) Looks like < 55s is the next big target for the big boys. < 70s is still a decent target for everyone else, < 65s if you have a bit more muscle than the average overclocker and < 60s if you and your P4 are feeling particularly frisky.
Glad to see people enjoying the bench I helped cook up one boring afternoon :)
Rys
Gandelf
10-22-2002, 02:45 AM
It would seem the table lags behind the results....
I posted a 62.83 a few days ago, and no sign of an update!!
/Sets new target for <58.31
Gandelf
*cough* KAIN forgot to update the table *cough*
Done now :D
One score I'm not 100% sure about right now...
Galifrey
10-22-2002, 02:28 PM
Thought I'd join your fun....
Used to have an impressive score on that table, now I am just a nobody hovering above the AMD users....
Looks like I gonna have to have another go when I get me granite bay and new P4.....
The 2.26 wont last at that speed for more than 20 mins or so without a blue screen, so I leave it at 3008 for 24/7 running...
Prometeia is the daddeh tho :D
List is still being kept upto date for anyone interested :)
zakelwe
10-26-2002, 05:32 PM
Andy ( Home ) is now up to 84.5 seconds with 1815 Mhz @ 173MHz RAM speed. All other settings same.
Actually, I am just waiting for the processor to cool down as I am attempting a run at 1826 but it keeps crashing near the end as it is fairly stretched.
I just managed my first ever SuperPi under 1 minute as well tonight, 58 seconds.
Regards
Andy
zakelwe
10-26-2002, 05:44 PM
Update .. 84.16 with 1826 @ 174 .
Regards
Andy
ronnie0738
10-26-2002, 08:25 PM
70.57 seconds
PIV 2.66@3.12, 390DDR
Got a load of results, just need these XP2600+'s out :D
zakelwe
10-27-2002, 11:37 AM
I wonder if the large FSB of the P4 aids it so much or whether it is mainly the 512KB cache, or maybe both?
If it's the cache then Barton should help AMD , in the meantime it will be interesting to see if the nforce 2 in a couple of weeks with it's 10% better memory controller knocks a bit off.
Then of course will Hyperthreading help the P4 ?
Rergards
Andy
It is mainly the pure speed that helps the P4 in the Pifast bench. Very CPU aimed benchmark.
ronnie0738
10-27-2002, 12:11 PM
I agree. :D
Tom Holck
10-27-2002, 02:52 PM
But another thing that helps is a Prometeia....
Best OC Regards
Tom Holck
Denmark
ronnie0738
10-27-2002, 03:29 PM
Which I have ordered & waiting for as we speak. :D
docah
10-27-2002, 04:33 PM
I just went water and Vmoded my test rig.
She's now stable @ 1941 (204X9.5) JOY! Putting my 1600+ @ 77.81 seconds :)
macci
10-28-2002, 05:01 AM
Hay this is a fun test :D
Just ran it for the very first time with a 2.8Gigger clocked to 3730MHz (w/ P4T533-C mobo) and got a result of 56.78 :)
Looks like RDRAM is a bit faster than DDR on this particular test.
Also ran SuperPi at 3740MHz and got a result of 40seconds.
PiFast ver. 3.3 1M was 25.03 at 3740MHz.
Will upload some pics once I finish this benching session... ;)
zakelwe
10-28-2002, 05:08 AM
Originally posted by macci
Hay this is a fun test :D
Just ran it for the very first time with a 2.8Gigger clocked to 3730MHz (w/ P4T533-C mobo) and got a result of 56.78 :)
Looks like RDRAM is a bit faster than DDR on this particular test.
Also ran SuperPi at 3740MHz and got a result of 40seconds.
PiFast ver. 3.3 1M was 25.03 at 3740MHz.
Will upload some pics once I finish this benching session... ;)
Well done on top spot.
Regards
Andy
JCviggen
10-28-2002, 05:20 AM
Originally posted by macci
Will upload some pics once I finish this benching session... ;)
You're gonna pass my 3D score while i'm without a decent rig arent you, you sneaky git :D ;)
j/k very nice work there m8, those RDRAM boards are still pretty nice! Still I gotto tell you its pretty frustrating to work with a f*cking aircooled celeron at 2.8G and a dead cooling system :(
petervandamned
10-28-2002, 05:55 AM
no idea yett what i have done :)
but here is a print screen
PiLsY
10-28-2002, 07:01 AM
Hmm
That score is far too low for the spec in your sig.
PiLsY.
petervandamned
10-28-2002, 07:03 AM
yess i did know
but check my sign now :(
waiting for the new abit max2 rev2
the epox is to mister prometeia-li (versteeg)
macci
10-28-2002, 10:11 AM
Ok so much for that little 'OC session' :P
no new 3dmark scores thanks to POS Corsair 3500 module <- it couldn't even beat my old sammy 2700 =)
Well anyways here is the PiFast challenge screenshot:
PIC (http://www.solidhardware.com/macci/nw/3730hexus_pi.gif)
And some Sammy2700 stuff over here:
PIC (http://www.solidhardware.com/macci/nw/243mem.gif) <- I'm gonna install some extra cooling on that thing lets see if it can hit 250MHz :D
JCviggen
10-28-2002, 10:14 AM
hmmm... I couldnt get the IT7-MAX2 to overclock past 228-230 mem with Corsair 3200/3500 , but on the old IT7 (red box) it does go to about 240 2/7/2/3. Maybe the board just likes the Samsung better rather than the Corsair being bad m8...
Well you are added as #1 macci, hardly surprising to see though :p
Here's a new one for the AMD folks...
http://www.adventurevision.com/somepictures/pifast.gif
64.84secs
Yup.
Added to the tables a VERY impressive time!
<bump>
Figure with all the new equipment that's been popping up, there should be some improvements in the times.
Well there hasn't been many new times submitted recently, hopefully this should get em going. :D
zakelwe
11-08-2002, 11:51 AM
I've just got my Corsair memory so I'll be improving on my 96 .00 score.
Jeff, I am getting closer to your Ati Rage 128 Pro score of 2900 ...
Hopefullym tonight will be the night :slobber:
Regards
Andy
NoOne
11-11-2002, 09:28 AM
<50secs .. isnt bad for a PIV
NoOne
11-11-2002, 09:29 AM
someone can send my pifast ? the link is broken
my e-mail is in my signature..
Thnks
Hi NoOne, I fixed the link, http://img.hexus.net/hexus_pifast.rar works now :)
Rys
NoOne
11-12-2002, 05:02 AM
thnks man :D
Downloading....
Gleep
11-12-2002, 10:37 PM
Here's an update to my posted time, now at 2,312Mhz, ram at 185Mhz.
http://www34.pair.com/gleep/71.89.jpg
fireandsmoke
11-13-2002, 11:10 AM
:confused:
I feel lame. how do you open/install this program after downloading and getting a desktop icon??????????
f&s
docah
11-13-2002, 12:24 PM
It has no installer so don't feel to bad. Just grab a copy of Winrar (http://www.rarlab.com/) And extract the archive to a directory anywhere you like. There should be a batch file in there to run the bench. :)
fireandsmoke
11-13-2002, 03:14 PM
docah,
thanks a lot! But 83 seconds just won't do!
hipro5
11-14-2002, 01:19 PM
The STRANGE thing is that I noticed that I have BETTER time when I put the fsb and the Mem at 1:1 in my Pentium4 rig....Maybe after all the 3:4 divider doesn't really works well......
http://www.hipro5.com/public/Benchies/Pentium4_ES_2,8GHz/png/Pi-fast_3560.png
This shot is with CPU and Mem at 1:1 and at 222,5MHz fsb and the Multiplier at 16x (ABIT IT7-Max2 Mobo).....
Caprid
11-14-2002, 05:56 PM
Here's a new 2700+ @12.5X210 on a KD7 :D
http://caprid.homestead.com/files/pi61.15.jpg
hipro5:
Whats that... *** ERROR in computation *** on the bottom of your screenie mean ;) :p
Very, VERY nice Caprid! :toast:
Now come on all you other 2600+ and 2700+ peeps! ;)
Caprid
11-15-2002, 07:22 AM
Thanks :)
And thats with just ambient water. Still have five days left for the Prometeia.(I hope). The new AIUGB steppings on the new chips is a nice improvement.
hipro5
11-15-2002, 08:55 AM
Originally posted by Caprid
Here's a new 2700+ @12.5X210 on a KD7 :D
http://caprid.homestead.com/files/pi61.15.jpg
hipro5:
Whats that... *** ERROR in computation *** on the bottom of your screenie mean ;) :p
Nice benchie man...:)
And about (Whats that... *** ERROR in computation *** on the bottom of your screenie mean).....it means that the program could right the final info in pi.txt so you can read it....
sysfailur
11-15-2002, 09:17 AM
Originally posted by Jeff
Very, VERY nice Caprid! :toast:
Now come on all you other 2600+ and 2700+ peeps! ;)
Ditto what you said, and I will very soon have some 2600+ massive oc'ing goin on myself ;)
sysfailur
11-16-2002, 03:05 PM
Just ran it on my nFORCE2 setup... @ 195 x 11.5 -- more than conservative settings and got 66.5... hehehh
Gonna retry @ 200 x 12. BRB!
sysfailur
11-16-2002, 03:15 PM
Originally posted by sysfailur
Just ran it on my nFORCE2 setup... @ 195 x 11.5 -- more than conservative settings and got 66.5... hehehh
Gonna retry @ 200 x 12. BRB!
I just did that and got 63.27 ! Aircooled @ 1.85v!!! Muhahah! Gonna try for 204 x 12 now... wish me luck!
sysfailur
11-16-2002, 03:32 PM
Originally posted by sysfailur
I just did that and got 63.27 ! Aircooled @ 1.85v!!! Muhahah! Gonna try for 204 x 12 now... wish me luck!
Nope... not enough voltage. :(
sysfailur
11-16-2002, 03:42 PM
Best I can get under my current situation... quite impressive, QUITE.
http://www.maximumoc.com/img/hardware/2600+/hexus_pifast_6327.jpg
Well the list was updated earlier this evening and all the new scores added :)
People keep pushin the boundaries, we are nearly knocking on the 60 second door with AMD now :D
Nice result sys. :toast:
I just put my 8K9A2+ back in action with my newer 2400 and here's the result...
http://www.adventurevision.com/somepictures/pifast_63-43.gif
Sucky thing is that my hard drive can no longer stand the 235MHz FSB I pushed up it arse previously. :( I'm limited to 221 now... which isn't that bad I guess. ;)
Fewture
11-16-2002, 05:48 PM
http://www.fewture.cistron.nl/img/pifast.JPG
XP1800+ Tbred @ 12,5 x163. Will try again when I get another mobo..
Gleep
11-16-2002, 10:29 PM
Switched to an Abit KD7, 2400+ @ 190 x 12.
http://www34.pair.com/gleep/69.66.jpg
sysfailur
11-18-2002, 01:23 AM
OOOOOOOOOOOOOOO boy. WATCH OUT. Volt mods are completed, gonna shoot for 211 x 12 = 2532mhz ;) I think that's doable :) Wonder how much I'll shave off!
PiLsY
11-18-2002, 05:15 AM
Just took number 1 back :).
I LOVE this new PE chipset Max 2 - supreme board. Still MUCH more to come as well :).
I really need 3.2vmem in bios though - Jupilers link doesnt seem to work. Anyone got a modded bios for it?
PiLsY.
Pilsy did you V2.0 come with a spare BIOS chip?
As I got one with mine!
Also all the results are updated :D
sysfailur
11-18-2002, 09:48 PM
GONE IN 60 SECONDS!
AMD AIRCOOLED NFORCE2 POWA!!!!!!!!!!!!
What else you guys want... compare mine to the other AMD benchies... BIGGITY BAM. And people say the nforce2 sucks. I laugh!
http://www.maximumoc.com/img/hardware/2600+/60secondspifast.jpg
sysfailur
11-19-2002, 12:26 AM
Wtf... this nforce has to stop owning. I did nothing but rerun pifast after a reboot and check my score now...
KAIN : Please update with this score rather than the 60.88. The settings are the same. :)
http://www.maximumoc.com/img/hardware/2600+/6059pifast.jpg
PiLsY
11-19-2002, 03:18 AM
Kain - no it didnt m8 :(.
Out of interest which version do you have? What colour are the cap near the cpu and what colour is the PCB? Ive seen 3 different versions now and heard about a 4th?!
Apparently theres one with black caps round the cpu, one with silver, both on a yellow abit pcb. Then you have one with purple caps round the cpu and one with red-brown caps round the cpu on a black pcb (only heard of and not seen this one).
No idea if it makes any difference, but im happy with mine so far (yellow pcb, black caps).
Cmon Sys - first AMD under 60 seconds plz :p.
PiLsY.
I'll check it later as I'm not near it right now, but I guess I just got a lucky free BIOS chip :D £6 free not bad hehe
Sys your result is online :D
As Pilsy said come on under 60secs!!!
Originally posted by sysfailur
What else you guys want... compare mine to the other AMD benchies... BIGGITY BAM. And people say the nforce2 sucks. I laugh!
So what happened the first time around? Was the memory not working correctly like you suspected?
At any rate... I don't think people will be saying nForce2 sucks for much longer if these are the kind of results people start getting.
Extremely nice score!!! :toast:
Just was looking at your score again sys... that is f$#cking awesome man. You are now up in the highly o/c'd P4 range and you aren't even pushing that hard. I can't wait to see you run with some better cooling. Again... :toast:
sysfailur
11-19-2002, 01:35 PM
Originally posted by Jeff
So what happened the first time around? Was the memory not working correctly like you suspected?
At any rate... I don't think people will be saying nForce2 sucks for much longer if these are the kind of results people start getting.
Extremely nice score!!! :toast:
Just was looking at your score again sys... that is f$#cking awesome man. You are now up in the highly o/c'd P4 range and you aren't even pushing that hard. I can't wait to see you run with some better cooling. Again... :toast:
Well, from the first bench to the 2nd, I installed new windows updates (including an AMD cpu windows driver patch). So I geuss that helped some. The memory is working correctly in dual channel though.
subscience
11-19-2002, 03:45 PM
@sys.. :slobber: That is amazing!
I just can't wait to see what the GB DCDDR can do! :D
sub.
Paladin
11-20-2002, 05:51 AM
I guess the way it works is we manually enter our results into the database URL posted then post the proof here?
sysfailur
11-20-2002, 11:03 AM
Originally posted by Paladin
I guess the way it works is we manually enter our results into the database URL posted then post the proof here?
Yeah somethin like that ;)
sysfailur
11-21-2002, 03:22 AM
Shaved .05 off! :P Same settings as above again, 2.08v on the core though and slightly cooler temps.
http://www.maximumoc.com/img/hardware/2600+/6052pifast.jpg
Caprid
11-21-2002, 05:02 AM
That's some mighty fine shootin there Tex http://www.gamers-forums.com/smilies/otn/wink/thumb.gif
Does the NForce two board have FSB adjustments over 200?
Edit:
Forget the silly FSB question. Amazing what a little reading will do:rolleyes:
b4ron9
11-21-2002, 03:54 PM
hi guys, please i need direction how to ise hexus (how to set)
sysfailur
11-21-2002, 05:39 PM
Originally posted by PiLsY
Cmon Sys - first AMD under 60 seconds plz :p.
PiLsY.
I believe you were wanting this? :) More results later today... gonna shoot for 211 x 12.5 (my max the board/cpu will allow).
Needed a 226w pelt to get there, and my power supply overloaded shortly after. Heheh :P
http://www.maximumoc.com/img/hardware/2600+/5953pifast.jpg
PiLsY
11-21-2002, 06:08 PM
Pld m8 :).
Guess what - given up on intel :D. 2700+ and a prometia amd kit are on the way. Just need to decide which nforce board to get.
Looked at the price of the 3.06, and for that i could get the nforce, 2700+ and prometia kit with pocket change still left over.
Does the memory have to be paired? Ive not actually got 2 identical sticks. The closest I have is some generic winbond BH5 and some twinmos with twinmos branded winbond chips. The only others I have are mushkin 3200, hynix 3500 and corsair 3200c2. Any ideas if a combo of any of these will work ok?
PiLsY.
Pocket change = good.....
sysfailur
11-21-2002, 09:14 PM
Originally posted by PiLsY
Pld m8 :).
Guess what - given up on intel :D. 2700+ and a prometia amd kit are on the way. Just need to decide which nforce board to get.
Looked at the price of the 3.06, and for that i could get the nforce, 2700+ and prometia kit with pocket change still left over.
Does the memory have to be paired? Ive not actually got 2 identical sticks. The closest I have is some generic winbond BH5 and some twinmos with twinmos branded winbond chips. The only others I have are mushkin 3200, hynix 3500 and corsair 3200c2. Any ideas if a combo of any of these will work ok?
PiLsY.
Well it just says "use memory of the same type for optimal performance" or something to that effect. So I would recommend using similar ram.
Good to hear of your switch! :)
Just wait until the next update of the PiFast page... it's not mine but I wish it was!!!
AMD + nFoce2 = "I'm not worthy!" :D
sysfailur
11-23-2002, 02:40 PM
Originally posted by Jeff
Just wait until the next update of the PiFast page... it's not mine but I wish it was!!!
AMD + nFoce2 = "I'm not worthy!" :D
Someone else's other than mine!? And faster than 59.53? I must see this!
If only I could get my chip colder... I could do 211 x 12.5 = 2637mhz.... having trouble hitting that.. temps are way too high.
shush nawty boy :slapass: tis a secret :D
Originally posted by sysfailur
Someone else's other than mine!? And faster than 59.53? I must see this!
I'll have to let him share it with everyone. But I don't think he'd mind me at least confirming that yes... it's faster than 59 seconds. :eek:
Nah if we going to tease lets do it correct ;)
Yes its faster than 59sec yes its faster than the one in
the snap shot below ;)
http://homepage.ntlworld.com/pmmeasures/pifast.jpg
And a done deal AMD2400 in Third place :)
http://www.thechimpcage.com/pifast/
Sorry Macci :( :D now imagine what Opps. 2.9G chip could
do in a Asus nForce2 Board :slobber:
Better still Someone get Opp. to send me his chip for free
as I have hit the limit on mine :(
Looks like you AMD Lovers with those new A7N8X's will
be kicking some INTEL AR$3 for a bit looking forward to what
others will get >2638mhz :)
Sorry guys, updated at last :D
Well the top is all change, keep on move guys!
Galifrey
11-24-2002, 03:00 PM
I'll have that AMD score before the week is out :D
sysfailur
11-24-2002, 04:00 PM
Originally posted by PMM
And a done deal AMD2400 in Third place :)
http://www.thechimpcage.com/pifast/
Sorry Macci :( :D now imagine what Opps. 2.9G chip could
do in a Asus nForce2 Board :slobber:
Better still Someone get Opp. to send me his chip for free
as I have hit the limit on mine :(
Looks like you AMD Lovers with those new A7N8X's will
be kicking some INTEL AR$3 for a bit looking forward to what
others will get >2638mhz :)
2-4-2-2 eh? I never thought to try 4 instead of 5. Maybe I should give that a whirl. Nice job! :)
It's a shame though that we can't use higher mults than 12.5x... and that means that OPPs chip would max out where yours did @ 2638mhz :\ Or if we can somehow get higher than 211mhz :\
NoStra
11-24-2002, 05:59 PM
I get 69.38secs with pifast and 49secs with superpi
specs:
XP1800+(tbred)@2230Mhz, Epox 8k5a2+, Twinmos PC3200 with winbond 5ns chips (223Mhz fsb turbo settings 2t)
Originally posted by sysfailur
2-4-2-2 eh? I never thought to try 4 instead of 5. Maybe I should give that a whirl. Nice job! :)
It's a shame though that we can't use higher mults than 12.5x...
and that means that OPPs chip would max out where yours did @
2638mhz :\ Or if we can somehow get higher than 211mhz :\
Yep 2638 is its max stable speed it will not run stable higher
well it will not run PIFAST higher without crashing out :(
I think its at 2.05v but don't quote me on that now, considering
what a stupid thing I did lol yep put heatsinks on mosfets and
never made a mounting point for doing v/core readings:(
Before I enabled the lower multiplers I was posting over 2638
with the 15x default but not stable actually took a few days to
get stable - plus I am not 100% sure I have a perfect air tight
seal in the prommy head - either that or what air is their when it
turns to water is collating on something and shorting the
CPU, its a now and then issue, but the one I think was stopping me getting that 12.5x multiplier @ 211fsb.
Anyway more Seal string has been ordered :D bargin performace
for XP2400 considering there is like a 100pound diff here in the
UK to the next chip up.
And if you ever need a good guide for explaining the CPU bridges
try this....Click here (http://www.beachlink.com/candjac/TbredDecode0.htm)
lefthandedgoat
11-25-2002, 06:29 PM
I think I have the fastest score on windows 98se and stock intel cooler =)
Enter FFT Size in k :
Compressed output (also useful to specify output format) ? [0=No, 1=Yes] :
Total Physical Memory Allocated = 61372 Kbytes
Computing series with index N=705226
Starting step 6
Starting step 5 ...
Starting step 4 ...
Starting step 3 ...
Starting step 2 ...
Starting step 1 ...
Starting step 0 ...
Series computing time : 56.47
Division time : 6.37
InvSqrt time : 4.07
Final huge multiplication time : 2.74
---------------------------------------------------------------
Total computation time : 69.81 seconds(~ 0.02 hours)
Writing informations into file pi.txt
The computation seems OK
Appending result to file pi.txt ...
Jot down your results or take a screenshot :)
Press any key to continue . . .
p4 2.8@3.25 on an abit it7max
Busta
11-26-2002, 03:26 AM
posted results of my measly overclocked 2400+ :wiggle:
http://busta.proautosound.net/files/PIFAST.174FSB.FASTEST.1.65.12.5.jpg
Note to kain: I accidentally put in my local time 3:20am ..instead of my pifast time ;) I'm not all here at this hour =) can you edit/fix that for me ..thanks
Galifrey
11-26-2002, 03:47 AM
Originally posted by PMM
And if you ever need a good guide for explaining the CPU bridges
try this....Click here (http://www.beachlink.com/candjac/TbredDecode0.htm)
Gah just read it and my head nearly exploded...
ronnie0738
11-26-2002, 09:33 PM
Just got this at 3.99ghz. :D
sysfailur
11-26-2002, 10:10 PM
Kick ass ;)
Just sent in a 60.71s. I'm getting closer to that 60s barrier. ;) (cpu speed of 232x11=~2554MHz)
Caprid
12-03-2002, 06:40 PM
Very Nice Jeff, what HD you have in there? My KD7 is maxing out at 220-223 and I don't think it's the RAM. Got a nice box from UPS today with a Prometeia in it, so I plan on breaking 60 soon :D
I'm just using an old Seagate 2.5Gb drive. I have the bios set to disable UDMA and I also have WinXP set to only use PIO Mode 1(since WinXP seems to override the BIOS). My drive also craps out around 220 if I don't change it's settings.
Hognert
12-04-2002, 04:58 AM
Got this with my 2400+ at 12,5*215
http://home.no/deadeye/2400+/hexus_216.jpg
JCviggen
12-04-2002, 03:36 PM
hehe...
sysfailur
12-04-2002, 05:02 PM
Good lord.. I was wondering if your post was about a new score :) Totally sick :P I geuss my "moment" where I was in 5th place is now fading away :( *cries*
Extremely nice time but...
"*** ERROR in computation ***" :(
SCCCCCHHHHHHHHWWWEEEEEEEEEEEEEEEET!!!!!!!!
Error? What is that error down there?
The new scores will not be updated until the weekend apart from the few I have done this evening so I can implement the user login script to save myself having to delete entries of identical scores etc.
But will be in fully functioning order on the weekend. You'll all get an e-mail about it :)
P.S. from now on anyone without a valid e-mail address will be unable to use the site. Due to the amount of fake entries I get!
Sorry guys!
Also sorry to anyone who appears to have had their entries deleted, due to one spammer I think some legitimate scores got caught in the deletions :( Gonna make the system a lot more fail safe as well.
JCviggen
12-05-2002, 10:32 AM
here's one without any *errors* ;)
Updated your score cause I'm nice JC :D
JCviggen
12-05-2002, 10:41 AM
heh thanks ;)
did you update the one I submitted?
This one is a tad faster.... but doesnt really need updating, first is first ;)
Yeah I updated your previous number one, cause I was looking their anyhow :D
JCviggen
12-05-2002, 10:46 AM
hehehe great stuff... thanks!
Galifrey
12-05-2002, 10:55 AM
hehe Kain I think you have my score in the wrong position mate....
should be just under gibbos... for a day or so :)
Bah just looked, musta posted it wrong...
http://homepage.ntlworld.com/mark.faulkner3/amd%20200fsbx12.5.jpg
My fault, ah well no worries, I'll have that beat in a day or so :D
Galifrey
12-05-2002, 11:28 AM
http://homepage.ntlworld.com/mark.faulkner3/pifast%20ownage.jpg
got fed up of being a minor player :D
Galifrey
12-05-2002, 11:43 AM
updated, now the fastest AMD at the chimpcage :D
Please update for me kain... :banana: :banana:
Caprid
12-05-2002, 12:11 PM
Nice scores guys :)
Hey Galifrey wouldn't happen to say *** ERROR in computation *** underneath that strategically placed WCPUID screenie would it? ;) :p :p
Hehehe nice fookin score Mark.... now about that error thing.........................;) :p
Galifrey
12-05-2002, 12:42 PM
overheating northbridge
cured it by blowing a fan (sorta) in the side of the case :D
zakelwe
12-05-2002, 01:15 PM
Nidce work galifrey with the Expox board.
I gues you like it ? !
:)
Galifrey
12-05-2002, 01:32 PM
oh YESH!!!!!
Galifrey
12-05-2002, 01:38 PM
Originally posted by Caprid
Nice scores guys :)
Hey Galifrey wouldn't happen to say *** ERROR in computation *** underneath that strategically placed WCPUID screenie would it? ;) :p :p
Not that I noticed, I did that to shrink the overall graphic to minimum size and include the cpuz showing the clock speed...
Anyway, I will be trying to beat it tomorrow, so for you suspicisious people I will include the whole thing :D
Heheheh . I've had times where I pushed too far too fast, and got errors b4 it would even run to step 5.
Best so far is a lame old 64.50
Galifrey
12-05-2002, 04:19 PM
I should add here I expect the master aka randi aka mr iceee to spank me by sunday :D
:D
BTW are there any WPcredit tweaks for this chipset floating around yet( NF2)? I see Randi still has them listed in his run at chimp... prolly just forgot to change it.
Galifrey
12-06-2002, 05:07 PM
yay Kains updated the page :D
Nice one Galifrey! :toast:
JCviggen
12-07-2002, 04:58 AM
I just couldnt help myself ;)
Niiiiiice scores JC and Galifrey !!!! Considering AMD chips are running at 1-1.4 gig slower speeds they are crankin' . Can't wait for the Barton and Hammer to come and ramp up........ gonna see Intel in the rearview...........
:D
That's if they don't go bankrupt first ;)
Galifrey
12-07-2002, 06:13 AM
lol, nice JCV...
I had a 54 with mem at 2-4-2-2 but computation had errors :/
Gonna be some time before an AMD is top tho I think...
:toast:
Then again .09 nm is coming for intel.............
NoStra
12-07-2002, 06:26 AM
Originally posted by Galifrey
lol, nice JCV...
I had a 54 with mem at 2-4-2-2 but computation had errors :/
Gonna be some time before an AMD is top tho I think...
:toast:
When the Barton arrives..the P4 will be crushed bij it.... I am sure of it!
I just love the competition... makes the prices a little more reasonable........ I hope AMD doesn't totally give up on the speed crown as has been stated.
MrIcee
12-07-2002, 11:47 AM
Randi won't be spanking anyone by Sunday my friends..I'm outta business after a failed Vmem mod. No board for some time to come so you guys will have to hold the torch for awhile.
Randi
HUH? Where you trying to mod vmem the RDA ?
MrIcee
12-07-2002, 12:00 PM
Yep.....8RDA Vmem attempt. If anyone else attempts it I advise extreme caution...I will not give details but to tell you it resulted in the board spinning the fans up but no post, no LED readout amongst other things. The board needs the extra voltage to run 207 and 211 at tight timings without kick back to the desktop in 3DMark....that was my impetus for doing the mod.
Randi
That blows bro.... lets us know how your making out( don't know what your plans are- another 1 ?), as I was waiting on that mod from you.
MrIcee
12-07-2002, 01:09 PM
muzz:)
My plans for a next board are what I was waiting for while playing with the 8RDA+..the Abit NF7-S. At this point it's a waiting game until I get the funds. The EPoX was not a bad board..but 2.9Vmem is not enough for high performance benching. I've done alot of mods but this one is similar to the Abit BD72..except the circuits appear to be different..hence my dead board.I've tried fixing it but it's all done.
Randi
Galifrey
12-07-2002, 02:08 PM
Originally posted by MrIcee
Yep.....8RDA Vmem attempt. If anyone else attempts it I advise extreme caution...I will not give details but to tell you it resulted in the board spinning the fans up but no post, no LED readout amongst other things. The board needs the extra voltage to run 207 and 211 at tight timings without kick back to the desktop in 3DMark....that was my impetus for doing the mod.
Randi
Ah Randi, I feel for you bro, thats axactly what happened to my A78NX....
I am not convinced about the tight timings on the mem tho, 2-5-2-2 is fine on mine 2-4-2-2 is a bit much for it... at 2.9v that is...
Can you go much tighter than that??????
Or are you talking WCPedits?
MrIcee
12-07-2002, 03:12 PM
Galifrey my friend:)
Are you talking 1 stick of ram or 2??
Those timings you mention work for most benches. But when I attempted them at 204 and 207Mhz at 2700+Mhz with 2 sticks in Dual Channel mode....I was getting kicked back to the desktop out of 3DMark...which is a classic "not enough mem voltage" issue in 3DMark benching. Now..mind you...the memory I'm running is used to running tight timings on the KX7 and KD7 at 3.25v plus...so that may very well be MY issue as those boards needed alot of voltage to bench 3DMark at 200Mhz with maxed timings. All in all tho...the 8RDA+ is a decent board all around....my next stop will be an NF7-S:)
Randi:D
Galifrey
12-07-2002, 04:06 PM
I havent tried a 3dmark yet, but the pifast was done using 2-4-2-2 at 2.9v on corsair xms3500 v1.1
I think you are right about the nf7s tho, my guuess is it will spank...
Abit just seem to be doing the right things at present, and seeing the teething problems of the asus and epox, they might be doing their reputation a lot of good delaying the release...
whats the voltage options on the abit?
zakelwe
12-07-2002, 06:09 PM
I got my Epox nforce2 board today. At present I only have one stick of RAM and I run a lowly GlobalWin CAKII on it aircooled, yet my Xp2400 trime is pretty good, only second to Mad Jeff in the aircooled AMD stakes :-
http://www.aocb77.dsl.pipex.com/pifast211.jpg
If only I had another stick of memory and this board with give a bigger FSB than 211 !
Regards
Andy
On my crappy cooling.... finally broke 59. wooooooohooooooooo
223x11 2453 2-2-5-2
http://home.attbi.com/~gpl08/58.94_223x11_2453mhz_2-2-5-2.jpg
Hardass
12-10-2002, 07:15 AM
I just downloaded this ,it won,t open is there a trick to installing this.
Do you have winrar? Or the most recent version of Winace?
As they are the only programmes that open it.
Here it is re-compressed in std ZIP format :)
Hardass
12-10-2002, 08:33 AM
Got it, Thanks guys.
hipro5
12-10-2002, 12:36 PM
My P4 1,8GHz@3627MHz did this.....but with mem 1:1...... :D ;)
New best pifast ........ 11x225fsb 2-2-5-2 timings 2475 mhz
http://home.attbi.com/~gpl08/11x225_2475mhz_2252.jpg
sysfailur
12-10-2002, 11:40 PM
If I can find some LN2 you're going to be seeing a new #1....
And that's all I'll say about that. *smirk*
Go for it bro.... gonna need a new bios for that board though( higher limits). I'd love to see AMD on top..... no matter who it is.....:toast: :D
sysfailur
12-11-2002, 12:19 AM
Originally posted by muzz
Go for it bro.... gonna need a new bios for that board though( higher limits). I'd love to see AMD on top..... no matter who it is.....:toast: :D
I won't be using the A7N8X... :)
sysfailur
12-11-2002, 12:29 AM
Speaking of which I forgot to submit my new best score... did it yesterday.. 59.38 w/ new drivers and cas2-4-2-2 as my only changes ;) Every little bit helps I suppose... but as soon as I aquire some LN2.. (looking for distributors) we may see a sub 55second AMD bench ;)
What happened to your massive cooler you were building/setting up?
sysfailur
12-11-2002, 12:40 AM
Originally posted by muzz
What happened to your massive cooler you were building/setting up?
It's in my garage... gonna work on cleaning it up some soon. :)
Looked like alot of work.
hipro5
12-12-2002, 03:35 PM
Updated Pi-fast bench with the Pentium4 1,8GHz C1 Stepping at 3681MHz......and with memory at 1:1 ratio
sysfailur
12-12-2002, 04:44 PM
Ahhh joined the sub 60seconds club ;)
Dapper
12-13-2002, 07:02 AM
Ok I'm coming up with times of 68-69 sec for a total is this good? Is this a test that is FSB or Multiplier favored?
I'm clocked at 2436
RichBa5tard
12-13-2002, 04:19 PM
http://users.pandora.be/colarjo/62s.JPG
epox 8rda+, 2* xms 3200 256mb, XP2400 @ 12.5*205, plain waercooling.
Just received the proc & mobo today, it's a nice start. :)
Yep your getting there......... but now it gets harder........ lol
Caprid
12-14-2002, 06:54 PM
Well, I improved my station in life :) Didn't even need a P4 or an NForce2 board to do it.
http://caprid.homestead.com/files/pi58.22.jpg
The prometeia helped a bit though.
KD7 2700+ 13.5X210 2835mhz :cool:
RichBa5tard
12-14-2002, 07:10 PM
I don't need no expensive cooling to get my XP2400+ below 1 minute. :p :banana:
I was getting jealous Cap..... so I had to redo mine.......... my best so far.....broke 58!! Please edit mine Kain when you get a chance.
http://home.attbi.com/~gpl08/57.94_11x228_mhz_2508.jpg
Timings 5-2-2-2
2600+ Water cooled
Galifrey
12-15-2002, 03:00 AM
Blimey, just as well I have a few more scores in the bag to submit if I get beaten...
Have scores available to take down Ronnie and Pilsy, but happy to remain top AMD until someone beats me ;)
sysfailur
12-15-2002, 07:48 AM
Yikes!
Galifrey
12-15-2002, 07:57 AM
lets just say 220 FSB tight timings :D
Tom Holck
12-16-2002, 04:12 AM
Originally posted by KAIN
The more people posting the better :D
Can't se my new score?
Posted 55.23 to weeks ago???
P4@3990 Mem 231 cas 2-6-2-2 Prometeia
There must be many new scores with the P4 3066 and the new AMD's :rolleyes: :rolleyes:
Best OC Regards
Tom Holck
Denmark
The Homeland of Prometeia
hipro5
12-16-2002, 05:02 AM
Here's a new one of mine with the P4 1.8GHz@3680MHz...
Tom Holck
12-16-2002, 05:57 AM
Nice bench,
I like that last line.
must be an errorkode or something! LOL
Best OC regards
Tom Holck
Denmark
The homeland of Prometeia;)
hipro5
12-16-2002, 08:22 AM
Originally posted by Tom Holck
Nice bench,
I like that last line.
must be an errorkode or something! LOL
Best OC regards
Tom Holck
Denmark
The homeland of Prometeia;)
:D They are Greek....It means : "hit a button to continue"...:D
Tom Holck
12-17-2002, 03:26 AM
Originally posted by hipro5
:D They are Greek....It means : "hit a button to continue"...:D
Ahh.:p
That means: "Tryk på en tast for at fortsætte"
(Danish) with letter "y" and "æ" but not so exotic as Greek:banana:
Best OK Regards
Tom Holck
Denmark
The Homeland of Prometeia
hipro5
12-17-2002, 03:45 AM
:D :D :D
Updated info with this P4 1.8GHz.....It's getting better day by day.....
RichBa5tard
12-17-2002, 04:14 AM
Damn hipro5, you've just beaten my XP2400+ bench. Nice work! :)
Tom Holck
12-20-2002, 06:50 AM
I think we must public the results here::banana: :banana: :banana:
The old 2.8 working out on the modded Prometeia almost 4Ghz
macci
12-21-2002, 12:29 PM
Now thats very impressive for a 2.8gigger! :)
what kind of mods have u done and how much did it help in terms of temps and MHz? :)
btw.. just imagine what this puppy could do in PiFast bench...or 3DMark :D:
http://www002.upp.so-net.ne.jp/ohij2/35.gif
(thats a AXP2700 (week 44) LN2 cooled, Vcore 2.12V, EPoX EP-8K9AI, V-Data PC3200 (http://www002.upp.so-net.ne.jp/ohij2/vdata.jpg) [Ultra-8-4Level CL=2 2-5-2 1Tcommand (2T-1T) (1.0-1.5)]
By Hideo (http://www05.u-page.so-net.ne.jp/ba2/ohij/)
Pedro Rocha
12-21-2002, 12:51 PM
Originally posted by Tom Holck
I think we must public the results here::banana: :banana: :banana:
The old 2.8 working out on the modded Prometeia almost 4Ghz
Tom:
That is a fantastic score for an 2.8, even bets some 3.06 with Prometeias, congratulations
:toast:
What mod did you do in your Prometeia??
Are you using I7Max2 v.1 or I7Max2 v.2 ??
Tom Holck
12-22-2002, 02:12 PM
Can't tell everything yeat, but:
Modded Prometeia (R404, and more). You now the factory that makes the kompressor is close by.
Really good contakt to the "naked" core with a silver-alloy-quicksilver "filling" (I am a dentist you now) -this mod can be fatal to your life.... I don't use any Thermal Compound. The "filling" and the cobber-cooling-head are an integrated unit with the core. Good kontakt every time, and the "filling Expand...
I use IT7 Max 2 v2 very modded
:p :D
Working on the 3.066 and Prometeia cooled Radeon9700
getting closer to JC
public soon..
DeBastaard
12-22-2002, 02:20 PM
Hmz
110seconds here :(
Tom Holck
12-22-2002, 02:25 PM
Pifast Challenge
Offline will return shortley - KAIN 22/12/02
waiting to see my 55.23 bench
(made one 54.6 but error and frosen desktop)
:banana: :banana: :banana:
:banana: :banana: I finally went sub-60 with a time of 59.95!!! :banana: :banana:
Think I'm getting the hang of this nForce2 board. ;)
WTG Jeff!!!!
Still gonna use that board for folding?????
heheheheh :toast:
Caprid
12-28-2002, 04:02 PM
Hmmm.....The result chart is still down. But if I recall correctly this wasn't to bad for 2750Mhz was it?
http://caprid.homestead.com/files/pi55.86.jpg
:cool:
8RDA+ 12.5X220 :D
Bushboy
12-28-2002, 04:11 PM
Wow Caprid, excellent time! I'm still stuck at 62secs because my 2400+ is cooled with a $20 Heatsink :(
SoulEdge
12-28-2002, 05:57 PM
Originally posted by Bushboy
Wow Caprid, excellent time! I'm still stuck at 62secs because my 2400+ is cooled with a $20 Heatsink :(
You the bushboy from amdmb? I thought you were running a 226W TEC on dual bongs? Something happen to your rig?
Excellent time Caprid!!! :toast:
sysfailur
12-28-2002, 07:46 PM
Yep, I need to get an epox nf2 ;)
WTG Cap!!!! You mofo , I have spoken your name as a bro to be dealt with................... bout fooking time you came through............ hehehehehehe
Nice fookin score cap!!!
muzz
Bushboy
12-28-2002, 10:27 PM
Originally posted by SoulEdge
You the bushboy from amdmb? I thought you were running a 226W TEC on dual bongs? Something happen to your rig?
Yeh that was on my 2200+ and 8K3A+. I still have the bongs and the TEC, but my Maze 2-1 doesn't have mounting kit anymore because I lost my Maze 3 ones and I sold that block. Anyways I'm getting a phase change delivered here very soon, two bongs are too hard to maintain...A lot of evaporation. ANyways sorry to go OT lol.
But again that's an excellent score.
A little 227x11 nForce2 action. :D
sysfailur
01-03-2003, 12:41 AM
Lookin nice ;)