View Full Version : My psu is messed... some help appreciated
gkiing
06-10-2004, 05:40 PM
My psu atx header got cut off (dont ask how.. in involves a lan party and some stupid people), and I soldered it back on according to this diagram
http://www.bleedinedge.com/guides/psu_3.3v_mod/psu_3.3v_mod_pg3.html
my question is: are all the red wires the same, and all the orange wires the same (and black)? I may have gotten mixed up and put a different black wire where another one was before.. is that ok?
Hell-Fire
06-10-2004, 06:15 PM
Yes, it should be as simple as that I believe.
GND is GND regardless. Same as the other wires.
Try it in a old board first if you can.
freecableguy
06-10-2004, 06:29 PM
Was there BEER involved in this LAN party? If then answer is no then you need to insert some ASS KICKING in the next one.
gkiing
06-10-2004, 07:29 PM
Originally posted by freecableguy
Was there BEER involved in this LAN party? If then answer is no then you need to insert some ASS KICKING in the next one.
Hehe :toast:
thanks for the info fire.
SuperDude
06-11-2004, 10:25 AM
You oughta say it fried your stuff and mess with your cmos so it doesnt boot up and show them. then make them buy you new stuff, TADA! new rig
gkiing
06-12-2004, 08:45 AM
I just tested it on my old P4 1.7 and everythings working fine :D
gj fixing that, and i had no idea lan parties were so ruthless
gkiing
07-07-2004, 12:45 PM
This thread is a bit old, I ended up buying an atx extension cable, cutting the end off, and soldering it onto the wires from the psu. Just solder the black to black, red to red, vsense to vsense and it workes fine, well at least it did for me. I also modded my +12 and +5v while I was at it (now all rails are modded) :D
Rodzilla
07-24-2004, 07:38 PM
I'm sorry but this is totally off topic.. he he he
gkiing ~ Your Avatar is by far the best i have ever seen!!!