View Full Version : bh-5 max V
Spider
06-03-2004, 11:53 AM
im getting an an5or with vdimm mod, the guy is asking at what he should set the vdimm (i know :banana: :banana: :banana: :banana: of vmod's) he want's V's 1 to set it on and 1 for the max (as a safty)
i have corsair xms 3500 bh-5 so what is a safe voltage 3.2 or so or is higher still safe?
korvskall
06-03-2004, 11:56 AM
WELLL WEELLL I run my babes @ 3.3 24/7 260 fsb. And they are not even hot. I would sa 3.4vdimm if you want some high fsb :D
Veritas.no
06-03-2004, 01:13 PM
Ain't the BH5 chips rated at 3.5 volts? Don't know about the modules though :o
Super strokey
06-03-2004, 01:27 PM
3.6 i think
Crankster
06-03-2004, 01:36 PM
3.4 np
Confused_User
06-03-2004, 01:42 PM
Yah, I think winbond rates their chips for up to 3.5v.
craig588
06-03-2004, 01:45 PM
Winbond rates them to 3.6V. Someone will come in here with their saved link of the specs of it to show everyone.
cpulloverclock
06-03-2004, 01:59 PM
I'm using the max with my shuttle AN50R : 4.08v and after there is a black screen
Elisha
06-03-2004, 03:42 PM
http://lenine.biz/elisha/winbond.gif
eva2000
06-03-2004, 04:25 PM
storage temp 150C :eek:
The table says they only dissipate 1 watt is that right? Sure they get hotter thean that.
texuspete00
06-04-2004, 06:36 AM
See the other thread ~"Is 3.3v too much." Same section... here. I'd say give the BH5 hell like everyone else, but as pretty as the winbond spec sheet is you are using an A64.
benonmsn
06-04-2004, 10:43 AM
i just found out that i was running mine at 3.5v. it has been that way for about 5 months (laxt time i benchmarked.. so they have been running at 230 @ 3.5 for 5 months.. work fine... so i would say atleast 3.5 for 24x7. its funny, when they first came out people were worried about 3.2v, then after 6 months they aint dying still going strong.. i think as time goes on even further we will see they CAN handle 2.6v 24x7 for years... i think ur mobo will go out first. on any account i think 3.5v 24x7 is safe for your computer..
Naasar
06-05-2004, 08:04 AM
i tell u guys though, idle the temps on my twinmos bh5's seem cool.
but when u put on prime(3.3v) whew!!!!! hot time in the town tonight:devil:
eva2000
06-05-2004, 08:47 AM
i stuck a 60x38mm Delta 50cfm fan on my ram modules and the heatspreaders are a constant 1-3C above ambient @ 23-29C at upto 250mhz 2-2-2-7 at 3.18v :D