View Full Version : Sai finally got his mach working ! [screen]
Hi, just wanna share my results for the !first! day with my prommy. It's with standart BIOS so I'll see what I can get. :)
http://mitglied.lycos.de/phasetres/cpuz_prommy1.jpg
BTW Primestable so far. ;)
Phamtastic
06-01-2004, 01:24 PM
Congrats bro looks good, how much did you pay for that puppy? and is it quiet was think of getting one. :toast:
Very nice.
Also as a mach I owner myself I can say that IMO its not loud. 35db is the number I think.
[-Stash-]
06-01-2004, 04:53 PM
Looks like a sweet overclock there.
35dB you say? Hmm, I went below that a while back and I *Still* think it's too noisy :( When the silence bug bites it's the worse of all. Especially when combined with overclocking.
IamAnoobieCheez
06-01-2004, 08:22 PM
Congrats!!!! sai. Enjoy your prommy. :)
I'll take the rear 120mm fan completely out, cause I always have the case open anywaye, and I'll replace the front fan with a papst 120mm
HawainPanda
06-02-2004, 06:32 AM
nice oc!
Nice you got it going... :D
You have to work on the fsb though, hehe... ;)
P.S. You leave the sidepanel of the prom open? Not good... :eek:
The compressor works better with a constant airflow around it. IMO it should not get as hot a live a longer life finally. Think about it... and as Gary said, you should not slow down the fans too much as phasechange needs the airflow to perform and to decrease the risks of a failure!!!
st0nedpenguin
06-02-2004, 09:37 AM
Sai! It's alive! :p:
Glad to see it's all up and running mate. :D
xtrempinoy
06-02-2004, 09:42 AM
MAN, seeing that, makes me want to get my prommie ASAP!
Update (Everything I post is at least 1hr primestable):
http://mitglied.lycos.de/phasetres/cpuz_prommy2.jpg
Originally posted by sai
Update (Everything I post is at least 1hr primestable)
No high fsb? ;) What's your Corsair's max?
Nice clocks anyway, hehe :)
I got a NF7 now again and I need to sink and vmod it. But no need for that atm moment. My GFX-Card pretty much sucks, so no need for benching. But I think I'll do the mods soon.
Crankster
06-02-2004, 01:32 PM
Germans with sub-zero cooling *shrugs* j/k :D
Nice work there, don't let SAE tease you, pwn his ass instead with T-bred B whuppass!
Originally posted by Crankster
Germans with sub-zero cooling *shrugs* j/k :D
Nice work there, don't let SAE tease you, pwn his ass instead with T-bred B whuppass!
LOL...
Maybe he can own me now... only have an Infinity here atm (killed my LP B accidently) and that clocks like cr*p :mad:
I only can bench at 12x230 to 12x235... :(
Maybe next week I'll get a new one... already ordered.
iceman2g
06-02-2004, 07:25 PM
Nice overclock there sai.
off topic: SAE does the LP have issues with vcore over 2v?
tictac
06-02-2004, 08:16 PM
Originally posted by SAE
LOL...
Maybe next week I'll get a new one... already ordered.
This new Epox board need some subzero cooling :D
Epox nForce2 400GB
http://www.comexgroup.com/technologies/_editorials/cebit04/img1/epox_8rda6.jpg
Originally posted by iceman2g
off topic: SAE does the LP have issues with vcore over 2v?
Yep... besides you modded it not to have those... ;)
I could go up to 2.08V relatively stable, but with the current Infinity it's impossible to get it stable... Infinities suck. Never got a good one able to do 250 dualchannel stable...
Only the two Lanparties did. I get a new one next week...
@Tictac
Do ya really think it's good? It's an epox...
Originally posted by SAE
Yep... besides you modded it not to have those... ;)
I could go up to 2.08V relatively stable, but with the current Infinity it's impossible to get it stable... Infinities suck. Never got a good one able to do 250 dualchannel stable...
Only the two Lanparties did. I get a new one next week...
@Tictac
Do ya really think it's good? It's an epox...
Remember the good ol' 8KHA+ ? :)
Yep. They got beaten by my KR7a-Raid :lol:
Two friends of mine had together surely 12 boards ( ;) ) of those... they died like flies, even worse than the DFIs :rotf:
tictac
06-03-2004, 05:01 AM
i thought EPOX board never die... :D
Originally posted by tictac
i thought EPOX board never die... :D
Hehe. You thought the wrong way... ;)
naelq
06-03-2004, 06:40 AM
GO EPOX! :D
tictac
06-03-2004, 07:02 AM
Originally posted by SAE
Hehe. You thought the wrong way... ;)
hehehe... :lol:
which board next......
DFI/ABIT/ASUS/...etc
where is your 400GB board? :rotf:
Originally posted by tictac
hehehe... :lol:
which board next......
DFI/ABIT/ASUS/...etc
where is your 400GB board? :rotf:
DFI denied any information... they said there won't be a dfi LP revised ;)
That would be the board to get. hehe... I wonder how the new via kt880 perform like... overclocking-wise ;)
sai, how 's it going?
iceman2g
06-03-2004, 04:18 PM
Originally posted by SAE
Yep... besides you modded it not to have those... ;)
I could go up to 2.08V relatively stable, but with the current Infinity it's impossible to get it stable... Infinities suck. Never got a good one able to do 250 dualchannel stable...
Only the two Lanparties did. I get a new one next week...
@Tictac
Do ya really think it's good? It's an epox...
When you get that the new board make sure you let us know how it performs. BTW the Infinity isn't that bad both mine will do 250 stable.
Originally posted by iceman2g
When you get that the new board make sure you let us know how it performs. BTW the Infinity isn't that bad both mine will do 250 stable.
NP :thumbsup:
Hmmm. What's up with sai?
Hey SAE, I think I'm stuck on too hot mosfets, I'll buy some sinks today. Will post later again .. ;)
Originally posted by sai
Hey SAE, I think I'm stuck on too hot mosfets, I'll buy some sinks today. Will post later again .. ;)
With sinked mosfets and vdimm mod, vdd mod maybe and vbt mod you'd possibly get 230fsb+ up to 250 with your ram... is your 3.3V rail modded?
I am sure you can show us better results soon :) :thumbsup:
Check my suicide screeny :D
http://mitglied.lycos.de/phasetres/cpuz_3ghz.jpg
.. praise the nf7 ;)
Board is sinked now:
http://mitglied.lycos.de/phasetres/fets_sinked.jpg
st0nedpenguin
06-04-2004, 10:51 AM
Originally posted by sai
.. praise the nf7 ;)
Too right, just ordered one this morning, should be here tomorrow. :D
Hey, sai. Don't compress the hose too much as it looses its insulation capabilities... with this cable tie. And didn't ya cover the screw holes ? :confused:
P.S. Nice sinking job :thumbsup:
That's the standart kit which was mounted. And yes I did insulate the screws. ;)
IamAnoobieCheez
06-05-2004, 10:08 PM
3,000mhz... nice clocks. :D
Originally posted by sai
That's the standart kit which was mounted. And yes I did insulate the screws. ;)
I was not referring to the kit but the cable tie on the upper hose...
And in this pic I don't see any screw insulation ;)
@IamAnoobieCheez
Yep :D
Originally posted by SAE
I was not referring to the kit but the cable tie on the upper hose...
And in this pic I don't see any screw insulation ;)
@IamAnoobieCheez
Yep :D
LOL you're kidding me ? you can only see one screw and there's a black sticky stuff on it, guess what it is :p:
Originally posted by sai
LOL you're kidding me ? you can only see one screw and there's a black sticky stuff on it, guess what it is :p:
No, I am not exactly kidding :D
I just wanna give ya some advice...
Watch the reworked (sharper, higher res) part of your pic here... where the arrow's tip is, is this what you mean is insulation of the screw???
You'd have to cover the screw hole with a big lump of seal string! The screw head must not be visible at all!
That's what I was talking about... :)
Originally posted by sai
It is not visible
What is visible here??? :confused:
Originally posted by sai
light reflections
Okay. Sorry... :)
But I felt like seeing a silverish screw head there :D You'd very likely kill your vid card then with water dropping from the screws on its back!
Any further progress now?
Hm no not really. The FSB is a real letdown, check this thread.
http://www.xtremesystems.org/forums/showthread.php?s=&threadid=36484
tictac
06-06-2004, 03:44 AM
do u have APIC mode disable.... we need to disable it to get higher FSB with vcore above 2V
and all other fancy stuff.. if u dont use it better disable it
(SATA, Firewire, etc.....):toast:
Originally posted by tictac
do u have APIC mode disable.... we need to disable it to get higher FSB with vcore above 2V
and all other fancy stuff.. if u dont use it better disable it
(SATA, Firewire, etc.....):toast:
Higher vdimm then what ?
tictac
06-06-2004, 03:52 AM
here is done with
ABIT NF7-S Rev 2.0
APIC Mode disable
Vdd booster
Vdimm mod
i/o mod
its imposibble to reach this FSB @ 3GHz with APIC Mode enable
to many IRQ to handle it such insane speed :toast:
Vtt mkod is also needed to track modded vdimm
Hexus PI Fast 32M :toast:
any performance loss with apic disabled ?
tictac
06-06-2004, 03:58 AM
3D Mark 2001... u will lost performance in this benchmark... and many others :(
hm pc doesn't get into windows with apic disabled
Originally posted by sai
Hm no not really. The FSB is a real letdown, check this thread.
http://www.xtremesystems.org/forums/showthread.php?s=&threadid=36484
I'll have a look.
tictac
06-06-2004, 04:06 AM
Originally posted by sai
hm pc doesn't get into windows with apic disabled
fresh install windows with apic mode disable
if u had already install windows with apic mode enable... & u will not able to load windows if u change it with disable... :(
Originally posted by sai
hm pc doesn't get into windows with apic disabled
You'd have to disable it in windows:
Systemsteuerung/System/Hardware/Gerätemanager-> ACPI-Uniprocessor-PC set to ACPI-PC!
Errr tictac does the built in L12 mod work ?
tictac
06-06-2004, 04:23 AM
what cpu is that? if it is throughbred.. yes
if its mobile.. no :(
80watt peltier on Northbridge will help high fsb too with this nf7s board :)
tictac
06-06-2004, 04:29 AM
cmon sai... push it higher... u can do better than that :)
gimme 33sec Super PI 1M
:toast:
Hm actually it's a Tbred. So shouldn't I try the "real" L12 mod ?
tictac
06-06-2004, 05:27 AM
give it a try... have u done vdimm,vref mod?
Both no. But that ram does 220mhz on 2,9v easily, I know this .. :(
tictac
06-06-2004, 05:37 AM
emmm.... where is ur DFI Infinity board?
Originally posted by tictac
here is done with
ABIT NF7-S Rev 2.0
APIC Mode disable
Vdd booster
Vdimm mod
i/o mod
its imposibble to reach this FSB @ 3GHz with APIC Mode enable
to many IRQ to handle it such insane speed :toast:
Vtt mkod is also needed to track modded vdimm
Hexus PI Fast 32M :toast:
..an old screenshot;)
http://netti.nic.fi/~hege/PiFast43/Dani4.gif
Originally posted by tictac
emmm.... where is ur DFI Infinity board?
RMA and I never want one again ..
Isn't even stable at 1.9v with high clocks.
Errr back to NF7:
it's gettin worse and worse, L12 mod didn't help....what to do now, this is startin' to piss me off now
Maybe I got more luck with an older BIOS ? D21 perhaps ?
Try Tictac D22Alpha1, works best on my board
where to get all the old bios ? Like d18, d20 and so ..
tictac
06-06-2004, 06:38 AM
LoL... Dani... where have u been? long time no see :(
where is the 270MHz FSb screenies :)?
tictac
06-06-2004, 06:40 AM
Originally posted by sai
where to get all the old bios ? Like d18, d20 and so ..
:toast:
D22 Alpha 1
Features:
- SIP Table of D10 Original
http://downloads.modlabs.net/bios/pic/Abit-NF72-D22A1-4247.zip
and the others like D18 ? I know this was the best BIOS I ever had on my last NF7
Incredible clocks on the nf7's TicTac and Dani:toast:
Hm cmon I need those old BIOS, I know someone got 'em at least on HDD :stick:
IamAnoobieCheez
06-06-2004, 07:20 AM
Originally posted by sai
RMA and I never want one again ..
Isn't even stable at 1.9v with high clocks.
Errr back to NF7:
it's gettin worse and worse, L12 mod didn't help....what to do now, this is startin' to piss me off now
Maybe I got more luck with an older BIOS ? D21 perhaps ?
what you need is a special pre-owned 1~ 1.5 year old Abit NF7/s v2.0 or any v1.2. The original v2.0 boards overclock like crazy(i'm talking about FSBs). First of all, it's compatible with my RAM. Second, it takes almost no mod to get the FSB up i.e. 230+FSBs(everything enabled.. CPU aggressive, APIC enabled, 128bit DC, cas222 etc) in games stability. I ain't interested in stupid 2d apps..
This is why I don't even bother getting recent release of v2.0 boards.. I just can't stand 150 FSBs on a nforce2 boards. I have to change the RAM sticks to get higher FSBs.. but I like my CorsairXMS 3500 x2 ram...
If I was to get a Abit NF7/s board, I would delibrately look for v1.2 just so I can run it damn stable at 220+FSBs in games.. the stability was... *incredible*. I fell in love with them.
tictac
06-06-2004, 07:34 AM
Originally posted by sai
Hm cmon I need those old BIOS, I know someone got 'em at least on HDD :stick:
ftp.abit.com.tw/pub/download/bios/nf7-s_2.0
tictac
06-06-2004, 07:39 AM
Originally posted by IamAnoobieCheez
what you need is a special pre-owned 1~ 1.5 year old Abit NF7/s v2.0 or any v1.2. The original v2.0 boards overclock like crazy(i'm talking about FSBs). First of all, it's compatible with my RAM. Second, it takes almost no mod to get the FSB up i.e. 230+FSBs(everything enabled.. CPU aggressive, APIC enabled, 128bit DC, cas222 etc) in games stability. I ain't interested in stupid 2d apps..
This is why I don't even bother getting recent release of v2.0 boards.. I just can't stand 150 FSBs on a nforce2 boards. I have to change the RAM sticks to get higher FSBs.. but I like my CorsairXMS 3500 x2 ram...
If I was to get a Abit NF7/s board, I would delibrately look for v1.2 just so I can run it damn stable at 220+FSBs in games.. the stability was... *incredible*. I fell in love with them.
dont worry Abit will release their new board this month
NF7S 2G
- nForce2 Ultra 400GB
:toast:
IamAnoobieCheez
06-06-2004, 07:42 AM
Originally posted by tictac
dont worry Abit will release their new board this month
NF7S 2G
- nForce2 Ultra 400GB
:toast:
cool... =) that's a good news..
:)
tictac
06-06-2004, 07:47 AM
Originally posted by IamAnoobieCheez
cool... =) that's a good news..
:)
here
have some screenies :toast:
http://www.hardwarezoom.com/viewcontent.jsp?ArticleID=169&PageNo=1
Originally posted by SAE
You'd have to disable it in windows:
Systemsteuerung/System/Hardware/Gerätemanager-> ACPI-Uniprocessor-PC set to ACPI-PC!
How can I change something there ?
tictac
06-06-2004, 08:07 AM
nice :)
new chipset cooler... and sb heatsink :)
What socket is this?
http://www.hardwarezoom.com/images/articles/43/socket-test-2.jpg
Originally posted by sai
How can I change something there ?
treiber aktualisieren -> dann manuell auf ACPI-PC einstellen. Neu booten...
tictac I even tried your cpc disable patch now, doesn't help ...
What do I need to sink except the big 6 mosfets and the little one under dimm3 ?
Ohhhh Kayyyyy ! This is what I did to get 0.5mhz more FSB (Clockgen) and nothing helped:
L12 Mod
VDD Mod
Every combination of Rams
about 100 BIOS
CPC disable
I don't know what to do now...I'll try Single Channel now
tictac
06-06-2004, 09:43 AM
have u tried D10 bios yet...?
Yep I did try it.
Hm at lower CPU Speeds I can run higher FSB, I thought this is just a DFI prob...man I'm goin to freak out here. Is there any good board out ?!?!
Originally posted by sai
Yep I did try it.
Hm at lower CPU Speeds I can run higher FSB, I thought this is just a DFI prob...man I'm goin to freak out here. Is there any good board out ?!?!
DFI Lanparty B! :D
With a lil modding ;)
Originally posted by sai
Yep I did try it.
Hm at lower CPU Speeds I can run higher FSB, I thought this is just a DFI prob...man I'm goin to freak out here. Is there any good board out ?!?!
Same Problem on NF7 here...
IamAnoobieCheez
06-06-2004, 06:31 PM
Originally posted by SAE
DFI Lanparty B! :D
With a lil modding ;)
lol.. :)
sai, i just noticed you have the same sticks of memory as mine lol. :)
Double sided rams dont oc with NF7!
Tiktak, u will get some 270FSB someday;)
OMG I'll safe up for A64 now, I'm fed up with NF2