View Full Version : WaterBlock for GPU with -30C Chiller
Hi guys,
I have a chiller and my next move is to chill my gpu, a 9800 Pro.
I have 2 questions, first, what's the best block that I may use to this procedure and can I use it 24/7?
Thanks for the replys.
Best wishes
Jorge Lopes
megahurtz-oc
05-25-2004, 06:26 AM
swifty mcw-50. after you get one take it a part and drill a hole in the center of the copper block about 2mm from the bottom with a 3/8 drill bit. be carful not to drill through it. measure first, then use a drill press. works awsome.
Originally posted by megahurtz-oc
swifty mcw-50. after you get one take it a part and drill a hole in the center of the copper block about 2mm from the bottom with a 3/8 drill bit. be carful not to drill through it. measure first, then use a drill press. works awsome.
Megahurtz-oc,
Thanks for the reply, just one thing, why drill it? Sorry I'm just newbie in this thing.
Thanks a lot, I'll be searching for that block!
Best wishes
Jorge Lopes
megahurtz-oc
05-25-2004, 08:37 AM
because the cold water will be closer to the core it drop my temp 5c. its worth it
Originally posted by jll
Megahurtz-oc,
Thanks for the reply, just one thing, why drill it? Sorry I'm just newbie in this thing.
Thanks a lot, I'll be searching for that block!
Best wishes
Jorge Lopes
Thanks mate, I'll try to do that "modding" :)
I'll post some pics when done.
Bye and best wishes.
Jorge Lopes
extremecorvette
05-28-2004, 07:03 AM
Post pic's of it
gouda96
05-28-2004, 07:42 PM
Would the pelt of an mcw50-t help much? Seemed to make a pretty big difference on my setup, but my chiller only hits -11c with the pelt on.
extremecorvette
05-29-2004, 09:16 AM
It would help some.
Originally posted by extremecorvette
Post pic's of it
Ok I'll do it, let me get a digital camera to post the pics when done!
I'll ask for the help of Ricky, the one's doing the cascade project!
Hope yoyu like in the near future.
I'm with a little set back, my 9800 Pro is with artifacts, works but the image is sh***!
Thanks for the help.
Best wishes
Jorge Lopes
oc_nightmare
06-11-2004, 08:57 AM
olá jill, é sempre bom ver tugas nestes foruns:D
why dont u get a homemade mASO block? theyre cheapo and perform very well... besides, they are very easy to insulate;)
cheers:toast: