OCZ Ram that loves voltage wanted

[EmineM]

like the subject says im looking for some ocz ram that loves voltage
my OCZ PC 3500 LE craps out at 280.
I need something like OCZ PC 3700 or PC 4000 or even PC 4200 that would run 300 1:1 at cl 2,5 by giving it some voltage...
which one of those three could do that

[andyOCZ]

The PC4200 EL will will get you closest to your goal. It likes volts and many have had much success with the higher FSB. As far as timings go, I am unaware of any RAM that will do CL 2.5 at those speeds. The performance at CL 3 is terrific.

You are doing very welll at the moment with the 3500 LE. What board are and CPU are you running?

[EmineM]

I am using the Shuttle an50 and a A64 3400+ for my 3500 LE

I just got OCZ PC 4000
I am giving it 3,3v and set CL 2,5 4 4 7 it crashes at 260 1:1 :( Its definatly not the cpu, i turned it on 5:4 and the cpu would go alot further

[Wingz]

my OCZ 4200EL can run at 300 FSB stable 2.5-4-4-7 but needs 3.2v.

also should be releaseing their 600Mhz DDR Ram (http://www.xbitlabs.com/articles/editorial/display/cebit2004-4.html) soon.

[andyOCZ]

Hey eMandM,

Back off on the cas setting. Use 3-4-4-8; you won't notice much if any difference and you shouldl get some xtra "free" mhz and more bandwidth out of the ram.

After all it's PC4000 =250mhz!

Good luck

[EmineM]

Shuttle an50r + PC 4000 wont even boot at CL 3-4-4-8, kinda dissapointed of this product thinking of returning it, I still got my LE tho :)

[eva2000]

EmineM maybe you need to lower your LDT to 2.5x ?

here's 512MB OCZ PC4400 3-4-4-8 at 2.9v vdimm

AMD64 3000+ @ 274.5MHZ x 8.5
1:1
LDT 2.5x

http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/pcmark2002.jpg

Super Pi 2M (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/superpi-2m.jpg) = 1min 29s
Super Pi 32M (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/superpi-32m.jpg) = 33min 29s

Sandra 2004 SP1 Buffered (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/mem-buff.jpg) = 3976/3975
Sandra 2004 SP1 Unbuffered (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/mem-unbuff.jpg) = 2261/2296

Aida32 3.90 Read (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/aida-read.jpg) = 3934MB/s
Aida32 3.90 Write (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/aida-write.jpg) = 1521MB/s

Sandra 2004 SP1 CPU (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/cpu.jpg) = 10,174 / (3701/4846)
Sandra 2004 SP1 CPU Media (http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/cpu-media.jpg) = 22347 / 24029

http://fileshosts.com/AMD/boards/Shuttle/AN50R/3000/LDT-25/OCZ/pc4400/8.5x/274-274-3448-1.7v-2.9v-1.5v-AA/sciencemark.jpg

[EmineM]

Lowered it of course "duh"

[eva2000]

you using 1x 512MB or 2x 512MB or 1x or 2x 256MB sticks ?

[EmineM]

i was using 2 x 256 and it wouldnt boot at CL 3-4-4-8 :(

[eva2000]

tried 1 stick ?

[EmineM]

yes :(

[eva2000]

strange then.. i think AN50R is pretty picky, my 256MB ADATA PC4000 wouldn't even boot on AN50R @ 200mhz 3-4-4-8 at 2.6-2.9v! but OCZ PC4400 and Hynix PC3200 D43 both are fine and boot

also RootX has OCZ PC4000 Gold on his modded AN50R too http://www.bleedinedge.com/forum/showthread.php?p=19549#post19549