PDA

View Full Version : Making the Container



redphoenix
03-07-2004, 03:57 PM
Alright as far as Im concerned, you get:

Copper slab for the piece that touches the core
Copper tube that connects to the slab of copper
Neoprene wrapped around the tube
Liquid Electrical Tape around the mobo
Denatured Alcohol mixed with the DI

Right?

Now for my question, what are some ways to connect the tube and the copper slab together? How would I solder it, and if I cant get the materials for it what else could I use?

charlie
03-07-2004, 09:43 PM
yes.
use copper plumbing solder and braze it together.

kommando
03-07-2004, 10:35 PM
Can you just use normal silver solder?

cold_ice
03-08-2004, 07:54 AM
Anybody built a DI container for a videocard?
What´s the easiest way to build one?
Is it possible to cut the end of the tube in an angle of 45°, and then solder it to the copper slab?
And is it a good idea to soft solder the copper for this temperatures?

thx

redphoenix
03-08-2004, 10:12 AM
I planned on making 3 DI Containers, CPU, NB, and GPU. I was just going to cut it at a 45 degree angle and do it that way.

Alright, Copper Solder. Thanks, I can I just get this stuff @ home depot right? They have copper tubes?

lalPOOO
03-08-2004, 01:28 PM
What happens if you make it out of pvc pipe and a very thin peice of aluminum (ignoring crappy preformance) The 2 attached together with some sort of 2 part epoxy like JBweld or somthing?

redphoenix
03-08-2004, 02:00 PM
Not sure.. I think the PVC will crack.

Slickthellama
03-08-2004, 04:57 PM
PVC will crack.

kommando
03-09-2004, 12:03 AM
What everyone else said.

I might make a few containers jsut for fun :)

lalPOOO
03-09-2004, 12:51 PM
Hmm, well I think I'm going to test it out. I've taken the pvc down to something like -11 but i guess thats not exactly -40 :D
I only made the pvc one for fun from crap lying around so its pretty expendable.

Russell_hq
03-09-2004, 01:26 PM
What about sealing the base of a tube onto the cpu package and fill it with acetone then pile in the dry ice. Direct contact with the core!

enzoR
03-12-2004, 12:18 PM
big temp swings

charlie
03-12-2004, 03:11 PM
Originally posted by enzoR
big temp swings

:thumbsup:

Slickthellama
03-12-2004, 05:03 PM
what if you took the IHS off a P4, then made a container for LN2 that was sealed to the base of the chip, direct LN2 contact? Phatness would ensue.

cold_ice
03-13-2004, 12:52 AM
I wouldn´t try to remove the hs on the Gallatin or prescott Cpu´s :stick:

kommando
03-13-2004, 01:52 AM
Heh just keep it as it is will work.

Russell_hq
03-13-2004, 06:23 AM
Originally posted by enzoR
big temp swings

Big temp swings when? I dont think so, its not like pouring liquid N2 onto the core. Fill the container with warm acetone then start dropping in pieces of dry ice until your down to temp. The temp wont drop that fast. Otherwise what do u mean?

enzoR
03-13-2004, 08:12 AM
from idle to load.....

lalPOOO
03-13-2004, 07:50 PM
Originally posted by Russell_hq
What about sealing the base of a tube onto the cpu package and fill it with acetone then pile in the dry ice. Direct contact with the core!

CRACK!

enzoR
03-14-2004, 12:37 AM
lol.... aswell :p

bh2k
03-15-2004, 12:25 PM
www.onlinemetals.com for all metals

kommando
03-15-2004, 11:07 PM
http://www.onlinemetals.com/merchant.cfm?id=91&step=2 argh which one?

Which one?
http://www.onlinemetals.com/merchant.cfm?id=253&step=2

Or would this do better?
http://www.onlinemetals.com/merchant.cfm?id=93&step=2

Endre
03-20-2004, 04:55 AM
Originally posted by redphoenix
Now for my question, what are some ways to connect the tube and the copper slab together? How would I solder it, and if I cant get the materials for it what else could I use?
You can use a cooking plate. :)