View Full Version : universal 3.3V mod(pc ice mod is too hard)
skate2snow
03-02-2004, 12:56 PM
hey,
I just buyed a NSpire NSP-450P4DL(couldnt find fortron:() and theyres no POT inside, and pc ice 3.3V universal stable mod is too hard for me, and i dont whant to remove the under cover.
So i was wondering if theyres another 3.3V(or 12V) universal mod?
And whats all the components that are 3.3V?(i know the DDR;)).
THX
lalPOOO
03-02-2004, 03:02 PM
too hard? what? The 3.3v sense line mod is considerably easy, especcially in comparison to a lot of the motherboard mods. I don't think there are any other 'universal' mods. What part about it is hard? (for you)
skate2snow
03-02-2004, 03:06 PM
I did all the mod i have found about my hardwares. And i dont know, i dont catch really the mod, i will re-read and will probably finish be catch.
lalPOOO
03-02-2004, 03:09 PM
yea, it is a little hard to pick up on. Try pm'ing him if you still have trouble, I don't think he'll mind giving you a hand :D
skate2snow
03-02-2004, 03:16 PM
im sure no, he looks like a nice guy:D.
I will read the entire thread to see if it clear my idea up
skate2snow
03-02-2004, 03:31 PM
THX to clear me up LalPOOO now i catch. I thought i ad to go to the PCB and solder like 10 things lol.
THX alot, im doing it tonight:D. I only have a 100K vr pot lol, i will try w/ that
TyphooN
04-24-2004, 02:10 PM
i just did this mod from the thread he posted, it was very easy. :0
skate2snow
04-24-2004, 02:27 PM
I know, its the easyest ever!
TyphooN
04-24-2004, 03:37 PM
is the voltage that is shown in the bios/asus pc probe correct, or is this what the sense wire is sensing?
skate2snow
04-24-2004, 03:46 PM
monitoring hardware are close to the truth, but not EXACT, but enough for your needs.
TyphooN
04-24-2004, 06:31 PM
alright, thanks
blinky
04-25-2004, 12:00 AM
could someone explain to me his method, in simple english, because i read the thread and i still dont understand what hes doing
enzoR
04-25-2004, 02:10 PM
yea please explain with his mod i understand that u have to cut the sense line.. nt the line that goes back to the psu u have to ground through a POT?
Endre
04-26-2004, 09:12 AM
Blinky:
-Cut the sense line
-Connect the end from the PSU to ground through a VR
Does this mod work with every psu? I don't think my psu have a sense line (is that possible?).
By the way I'm not talking about my Antec, it's another cheap psu that I'm gonna do the mod on. But I don't see the brown wire on either of them still.
Endre
04-29-2004, 10:54 AM
Works on every PSU that has a sense line. Sense it's a mod on the sense line it obviously doesn't work on those that doesn't have it. ;)
skate2snow
04-29-2004, 02:29 PM
The sense line is the little orange/brown that goes in a 3.3V line(oranges)