Xp1700

[thomas66]

what do you think can i get from that chip
will it be any good?

[Peen]

all i can see is JUIHB and DLT3C, but judging by that it should be good :toast:

[Russell_hq]

It looks like a DLT3C so you should be able to get a great overclock from it. 2.2-2.3 on air atleast, 2.5 on water 2.8 on phase change. Thats my best guess. I had an 0308 DLT3C and got it up to 2.8GHz with propane powa :D

You should get 3200+ speeds with air no problem.

[thomas66]

there you go ....

[Peen]

most JUIHB's do 2.2ghz atleast. I would expect 2.2-2.4ghz on air, that is if u raise the voltage. You may be able to run 2ghz stock vcore, maybe not, mine wouldnt:mad:

[thomas66]

i hope i find the time during the weekend to screw everything together will let you know the results than...

so at least i think its a good cpu not a fake right...

[tc_overclocker]

That's the exact same stepping that me and MajorMav had on the 1700+, I think Mav had his stupidly close to 3GHz under his stock Prommie Mach I, and mine ran at 2.45GHz using 1.75v under a ThermalTake Volcano 7+

[saaya]

i have a dut3c 0308 or 0309, not sure. 1700+ and green pcb as well. does 2.3ghz max on air with ~2v and 2.2ghz with 1.9v

[johnny6722]

see my sig, I have a DLT3C JUIHB 0319 that has been running over 2.5 for 8 solid months, 24/7 and will eat Prime 95 all day long.

On AIR. See temps and info below....

This is NOT uncommon on air. 2.4 should be no problem at all with proper cooling.

[Learn]

Originally posted by thomas66
there you go ....

i' ve a 1700+ 0308 RPMW 9599497250049 (of a friend)

it does stable 2600mhz / 1.8v with 15°c water
and a little more with chilledwater (-18°c)

http://membres.lycos.fr/ftpad/images/1700+RPMW/


edit: 0308 :D

[BoGuS]

Mine is a 0308 MPMW see sig for the rest....

havent tryed any modding or better cooling, so maby its a goldie maby not... but if its a goldie then i'm glad that i bought 2 of them :O) havent tryed the other one yet though...

But in general all 1700+ dlt should clock 4 the money ....

B/

[Henry]

Here's my 0308 XPMW (watercooling, 38c idle) :

http://www.geocities.com/henry_moniaga/axp1700_2700mhz.txt

[TinTin]

I got two pcs of JIUHB 0309UPMW, DLT3C 1700+ before, both did 2.6G with air-cooling.

[Susquehannock]

Originally posted by thomas66
there you go ....

Nice chip. :thumbsup:

With good HS&F and proper voltage you should break
2.5ghz easily.

Some will break 2.5ghz with less voltage than others. Both of
these run 100% stable at 1.8v. (see sig) Some need
closer to 2v.

Please let us know how it performs. :)

[r3b0rN]

just out of curiosity, i have an old 1800+ which is now dead... but to think of what could have been, heres the info - AX1800DMTC3AGOIA0225DPBW91303960043 - is this a good 1800+?

[r3b0rN]

heres a pic of it, i believe palomino core...

[Susquehannock]

Yep, that's a Pally.

Code printed on squareish core, higher default voltage ("M") etc ...
... also ... AX#### as opposed to AXDA#### for Tbred.

[GomerPyle]

http://www.overclocking.dk/img/users/23219_01.jpg

Here is my jiuhb 0310xpmw

[r3b0rN]

nice tommy, now focus more on raising the fsb rather than the multi :D