PDA

View Full Version : Help Watercooling 3 way SLI on the M5E with the smallest change


andressergio
05-01-2013, 07:41 PM
Hey guys tomorrow i will receive 3 waterblocks not full cover the new EK universal that uses the triple SLI bridge also

this is my system today

http://i.imgur.com/3jaM7vb.jpg

the only thing that may confuse cauz its at the back is the pump out goes to rad to the right tube ok ?

now i wanna cut less as posible and conect to the EK triple paralell bridge

so i tought that should be CPU out to EK in and EK out to rad ?
El Mano
05-02-2013, 04:40 AM
Hola!
What I'd do:
Res -> Pump -> GPU starting from the bottom, then mid then top GPU -> CPU -> Rad -> Res

This is what I'd do. You shouldn't care for cutting more or less, it's the long-term performance what you should aim for, IMHO.
andressergio
05-02-2013, 07:14 AM
Hola!
What I'd do:
Res -> Pump -> GPU starting from the bottom, then mid then top GPU -> CPU -> Rad -> Res

This is what I'd do. You shouldn't care for cutting more or less, it's the long-term performance what you should aim for, IMHO.

Thanks buddy !!!
Gorki
05-02-2013, 09:25 AM
Let us know how do new toys perform. I'm really interested in performance gains. ;)
andressergio
05-03-2013, 10:03 AM
As promised guys !!! Results are amazing before i had to put cards at stock for game and even so i got crashes
And problems of stability card benching reached 86C now 41C lol and gamming crysis 3 39C
All problems gone with this super easy to install

http://i.imgur.com/AfQRjbE.jpg

http://i.imgur.com/okoGaAO.jpg

http://i.imgur.com/9nPOcC8.jpg

http://i.imgur.com/AJeGToP.jpg


and...done !!!

http://i.imgur.com/CTg3kFT.jpg


PCars at 1306core see left above

http://imgur.com/oZv24WN
Conumdrum
05-03-2013, 08:53 PM
Nice!
andressergio
05-03-2013, 09:23 PM
Nice!

thanks mate !!!

here more fun gamming at 1306+ core

http://www.xtremesystems.org/forums/showthread.php?279937-GTX-680-OC-Result-Thread-Post-your-results-here/page22
Church
05-03-2013, 11:19 PM
What do you think of putting something on top of sli bridge (card interconnect one, not waterblock interconnecting one) to make it better mach to waterbridge nearby? Eg. some sticker with similar csq circles ..
LeoAndrade
05-04-2013, 06:34 AM
how are the VRMs holding? I wouldn't push the gpus too far without a nice airflow on the VRM's heatsink...

anyway, good work!
andressergio
05-04-2013, 10:18 AM
how are the VRMs holding? I wouldn't push the gpus too far without a nice airflow on the VRM's heatsink...

anyway, good work!

leo i have a fan at the back 1cm of the card a Yate Loon pumping air, 2 passes of 3DM11 VRM 45C measured by multimeter i think is good
andressergio
05-04-2013, 10:20 AM
What do you think of putting something on top of sli bridge (card interconnect one, not waterblock interconnecting one) to make it better mach to waterbridge nearby? Eg. some sticker with similar csq circles ..

i would have been very nice if the blocks or bridge have some sort of light like the XPSC but its not EK style i would prefeer that but seeing how they perform oh man i dont care it they are yellow lol

cheers !
Sergio
BababooeyHTJ
05-04-2013, 08:06 PM
How are temps? That seems like a lot heat to dump for a single 480. What speeds are you running those fans at?
andressergio
05-04-2013, 08:27 PM
How are temps? That seems like a lot heat to dump for a single 480. What speeds are you running those fans at?

runing bench with uses 3 cards at 1320core at 42C load and I3770K 5Ghz HT at 1,496 load rad not even warm, fans are silent, this XPSC holds all like a champ !!!

gamming BF3 temps are 32C load no game passes 39C load