View Full Version : 3gig Club
Hardass
09-05-2002, 06:04 PM
Finally made it. It,s nice here.;)
Chong345
09-05-2002, 06:05 PM
Welcome to the Club :D :toast:
majormav
09-05-2002, 06:53 PM
i like this xtreme club and all its mini clubs welcome
JBELL
09-05-2002, 07:53 PM
hardass *sniff* you've gone to the dark side
TRAITOR!! :stick:
Chong345
09-05-2002, 07:56 PM
I went from AMD to intel as well but I use my AMD 24/7 where as the intel just sit in the corner in time out. ;)
sysfailur
09-05-2002, 08:02 PM
Egad man, what screenshot software are you using!? Tis horrendous!
Smizack
09-05-2002, 08:33 PM
Originally posted by JBELL
hardass *sniff* you've gone to the dark side
TRAITOR!! :stick:
Just what I was thinking. This is a say day indeed.
sysfailur
09-05-2002, 09:44 PM
Originally posted by Smizack
Just what I was thinking. This is a say day indeed.
What's a say day? :slap:
Hardass
09-06-2002, 02:11 AM
Originally posted by JBELL
hardass *sniff* you've gone to the dark side
TRAITOR!! :stick:
Hardass
09-06-2002, 02:11 AM
Chill my Son, AMD still runs my house.;)
Hardass
09-06-2002, 02:14 AM
Originally posted by sysfailur
Egad man, what screenshot software are you using!? Tis horrendous!
Using PhotoSuiteIIIse but it doesn,t matter what you use if you don,t know what your doing. It,s fine until I resize and then it always gets blurry or like this.
sysfailur
09-06-2002, 06:25 AM
Originally posted by Hardass
Using PhotoSuiteIIIse but it doesn,t matter what you use if you don,t know what your doing. It,s fine until I resize and then it always gets blurry or like this.
Ah ok, gotcha :)
Torinalth
09-06-2002, 07:37 AM
having a hard time getting to 3k on air with my 2.26.... just passed 2.91 and trying to milk more but my damn room is hot....
Torinalth
shadco
09-06-2002, 10:33 AM
Can I join in.
http://mywebpages.comcast.net/ddr333/it7/cpuid3034.JPG
Shad
Hardass
09-06-2002, 10:36 AM
Very nice, Everyone is welcome here.;)
Jupiler
09-06-2002, 12:36 PM
Congrats to both of you.:toast:
This is the highest I managed to post with mine. Even could run some Sandra benches but not for long.
This on IT7 and 1.85V max, reads about 1.80V.
Nobody with a spare Prometeia? :)
Creative
09-06-2002, 08:24 PM
I had my 2.26 for about 2 months and heres the highest I could get her. This could bench sandra both cpu and multi and meory but it wouldnt run 3dmark nor prime so i decalred her UNSTABLE :D
http://users.bigpond.net.au/creat/intel/3120Wcpuid.JPG
Here is what I consider my 100% stable spot.
http://users.bigpond.net.au/creat/intel/3gigstable.JPG
I dont have the cpu anymore though cos I sold her during the week in anticipation of a new 2.66 or 2.8 :) I rekon I could have gotten more from the 2.26 in the IT7 but as you can see it undervolts to 1.78 on load at 1.85 in bios compared to the BD7II in the first pic which did up to 1.86 with +15% in bios
Klosterbruder
09-09-2002, 10:52 AM
I want to join in, too. 1,6 Ghz P4@3,137 VCore 1,8 V Stock Intel Fan (hehe i've kicked all 1,6 Ghz user in the vr-zone list only the LN2 Users are in front of me). Btw image looks same as JC, but it isn't, although we have same board, cpu and ram.
Hardass
09-09-2002, 10:57 AM
Welcome to Xtreme.:toast:
Klosterbruder
09-09-2002, 11:05 AM
thx, one of first forums they welcome you. make me happy :) .
Hardass
09-09-2002, 11:12 AM
We try to make everyone feel welcome!
Klosterbruder
09-09-2002, 11:19 AM
for me it has work. :)
Ragnarok
09-09-2002, 08:13 PM
http://users.bigpond.net.au/ragnarok/3ghz.jpg
can i join too :D?
Creative
09-09-2002, 09:13 PM
Pretty nice OC there rag...:):)
2.26, it7 modded, 1.9v, swift+pelt 225w+aquarium refrigerator :
2.4b, 1.75v, o/wise same as above :
s7e9h3n
09-10-2002, 01:23 AM
I wanna be part of the club! (and this forum!) :D
This is @ 1.65V with a crappy little 72W pelt.........
.....but today I got my Swiftech MCW478 w/226w pelt....can't wait to see what this puppy can do....
Hardass
09-10-2002, 02:10 AM
Welcome to Xtreme. I hope you use some of those 3gigs to join our folding team. We would like to have your help.:toast:
Hardass
09-10-2002, 02:11 AM
Originally posted by Ragnarok
http://users.bigpond.net.au/ragnarok/3ghz.jpg
can i join too :D?
Welcome to Xtreme. Good to have you here.:toast:
hallowen
09-10-2002, 03:39 AM
Pushed it, but made it@3017
(hope the image shows!)
Hardass
09-10-2002, 03:43 AM
Nice work, now lets put all those spare cpu cycles to work folding for the Xtreme Folding Team. ;)
Creative
09-10-2002, 07:52 AM
DDA nice oc on the 2.4b man...:)
Im hoping that when I do my vmod on the IT7 that with some higher volts i can get some more Mhz....currently slacking out at 1.75 here.....gimme 1.85 dammit :D
heheheh
Originally posted by Creative
DDA nice oc on the 2.4b man...:)
Im hoping that when I do my vmod on the IT7 that with some higher volts i can get some more Mhz....currently slacking out at 1.75 here.....gimme 1.85 dammit :D
heheheh
no change at anything above 1.75v
Jupiler
09-10-2002, 09:54 AM
Creative :
Why don't you wire the 4 pins, you'll get 1.85V by default then? I'm probably gonna Vmod my IT7 too and see how high I can push this sucker.:)
can i join???
i have no pics but...
and i know it`s not very extreme...
but my 2.8B i now running at 3.5gig with 1.7v(21X167FSB)
all with a cheap air cooling....
using it as it is right now so it`s rock stable....:D
GOD.....:)
Originally posted by Jupiler
Creative :
Why don't you wire the 4 pins, you'll get 1.85V by default then? I'm probably gonna Vmod my IT7 too and see how high I can push this sucker.:)
IT7 has an OVP protection over 1.90v; so there is no way to overpass such limitation unless pin 10 soldered with appropriate resistor (at least I hope so, like KT7, KR7A, KX7)
Originally posted by DDA
IT7 has an OVP protection over 1.90v; so there is no way to overpass such limitation unless pin 10 soldered with appropriate resistor (at least I hope so, like KT7, KR7A, KX7)
but the ultimate question is....
do u want more then 1.9v for your P4?????
i think not...
if it wont oc to the max at 1.8v then it won`t do any better at 1.9v or over...
that was my finding...
actually it made it worse at 1.9v then 1.75v on the 2.26B...