Mega Box = Corsair 800D + Silverstone Raven 2

[Marcos Viegas]

Hello guys :up:

First i apologize if my english is not perfect but I am brazilian and I know some of this language and think it's enough... :D

To make the case i was inspired by two cases:

Silverstone Raven 02

http://www.silverstonetek.com/images/memo/5970_in_RV02.jpg

Corsair Obsidian 800D

http://img.zwame.pt/slider/corsair_800d_review/corsair_800d_1_small.jpg

I've done his scheme in Google Sketchup but for now i'll leave it to show the look further ahead after all do not want to spoil the surprise... :nono:

This is the scheme to sustain the case:

http://images.orkut.com/orkut/photos/OgAAAPiLrgOyr7T1QoxgUjbzuWxdgkDAjPUENWuM9tPrLiqaXn kmb87EvdrnlWmVMtqPx24aztPs62-IxMIVwXjipMQAm1T1UJvfrNJQk5P8dZErgThiiVsKduAs.jpg

Well folks this is the beginning, the case will have the following dimensions: 50 cm high, 70 cm long and 25 cm wide.

The structure:

http://images.orkut.com/orkut/photos/OgAAAAAMw2CbFJ16nVMEolvNyE5zef5UcgrhY-QXJZ1sqWwhidGsQy6ifs5N9vMRv0kFbjKRrxtSmNqTcDRGsXgv HdcAm1T1UNMGRiuLv0ONgDY60lOgCX3uqOS6.jpg

http://images.orkut.com/orkut/photos/OgAAAPxsMkSZDItrKQt3qxHzL8mrRueLEJa2YvzvdGF39zUSWI NGzSI9cGtNo8Ne9WFsJAjwFEp10LpsphKkTLqaS54Am1T1UINt SMqGfV5tu6EmXBWClZnKDaeM.jpg

http://images.orkut.com/orkut/photos/OgAAAGpviYk1AvOPRx-iP0fNff4MryjFO1cJMzZb-YBqD6J2N-rdj3V3rCKcwuh3Jqe6f8BWC9oZQF-Vv6JYfSMep2oAm1T1UApcwft9nW3kg7EVRZcusGo3AWtJ.jpg

http://images.orkut.com/orkut/photos/OgAAALaPja6mSC90TQtcUPsIpfnQT7osepDx1DM9XJNm1UydNp DHzxa3UBdCIntbTVs1bMNljD66wujiiU0yugGPmQcAm1T1UJNL ce8ZJJmyfMLpFluKAdfESDt6.jpg

http://images.orkut.com/orkut/photos/OgAAAMGItvpuk-6sm81cojlqLa6mj_z3dcNgwxumJ0kau-MmnALHEV716wopIi4AZnxr22DD2UbPchAetScUDKgUfO0Am1T1 UEZNohncR8Dh8N5ZYDedCg0lPNqr.jpg

http://images.orkut.com/orkut/photos/OgAAAFXfTnGVXHtq4TlmyaP5Xw6zP3eYMMT8io7obs7V5UtLm9 V1b11KzOxUQebVaPFhxbrJCDBxfiLA8-y9pSz1WF8Am1T1UJgNnvaRMo89B0uy6Fgf5F30oTgv.jpg

http://images.orkut.com/orkut/photos/OgAAALL_ooGIkrwshSZKJyQ6QCz2lxf9p3OsnOQCXguDKgRJvd aocEZ8jeaKVKv9BOda3oAy88C0vzhJ0QXDsX5SlYIAm1T1UMC1 kWU6RqsMPJb_vqvIwgaRgTWP.jpg

http://images.orkut.com/orkut/photos/OgAAAMnT_GR9DBX_mEU56I-cj0HxXig9ivXRI9Qt5ybZ7R0IWNk-Y5sGLiRlyaI5Ksw8kRF3Lym3RGfA9AcP8y_vbrUAm1T1UCtUAR UnZb8gXTYPw0RIbJK3L02T.jpg

Size comparison between the CM 690 (moded) and Mega Box:

http://images.orkut.com/orkut/photos/OgAAABboMpq9YpZWSfi9wfxG5WPLnKd3qMMZZ__Qam2-1rE1rby-7KjI7QUb2KMePSbuaTXSyJKHDXZn4RPadchXyqcAm1T1UPUtHC g78_gUpPc7qFYDC2dt9wP3.jpg

http://images.orkut.com/orkut/photos/OgAAALQ2xW0dsy8fvItLimGsz-21WeL2zUkWHWD4ClOZYgGrJzMxkTYPn_XvrfVpd11x2_EqjoP9 klxSamUdfpo5k_oAm1T1UBOP9apF-uTVmQrD_ZNgy1TZQp06.jpg

http://images.orkut.com/orkut/photos/OgAAAMACskxludxn578JnAl9ET9cL1ScsrlP9ReXXZL4xRQan3 gQec2_RAbokuGUvfbc8wReCEXuH_Mq-eFI_b0zbN8Am1T1UAyy5HuH0XSprcgpDuV-rg6aM-ky.jpg

http://images.orkut.com/orkut/photos/OgAAAD5MnisPleV6hv81MLaYkU_37Z1CXWHPGfNBa5CthOtFip G7MwHhMZtqyuzh7JqXuEJZDyABZH_iWYtkRi8w43QAm1T1UIlw SRY4vhdUjpF0OsJHQEc-AEDr.jpg

Below are some images of how i intend to leave my project:

http://images.orkut.com/orkut/photos/OQAAANuSWCFx9btXu2g5AXyorCLOcYXiuKsgOPfjYOmxU9rWkc bg4njGi3dIZJFrfKDXFxVrm0JjAA9GEF3-vhX_cBAAm1T1UHGgHSZewbQ2VxXltKWcP3LZHF_1.jpg

http://images.orkut.com/orkut/photos/OQAAAMH1dc_gpRqHtjIO-ebUNEkVoxIgrXuhcxkZShRS1Kf_2dJSv7IoEVkDF3YvJu8aSvQ 5jTEnXCFTsV74MkRoP4YAm1T1UL-JRQDlKzzL2KyZcvH0rUihGvVy.jpg

http://images.orkut.com/orkut/photos/OQAAAFnmgx4_HcsNPoN3tXezRMTiTHSjK-44K4GEz7iJy34oz0_SZMp8IrSBKfazxrSZEIeedypx5dCrGg9b Wk4ohX4Am1T1UNpqwUtzTHHiEmJM7SK7Z-dB6JzM.jpg

http://images.orkut.com/orkut/photos/OgAAACKIxLwfceW2k42Kq2uZ2WlYBzJRr39_ZidDsVaI90FLYQ MdTfOnYJHLDlZz4yoC26WMxIHxZm3CGYQVuzaTMRMAm1T1UAxt eoZIcK7U184EWjrd2296RLT4.jpg

http://images.orkut.com/orkut/photos/OgAAAGLp63f7Ob4wh0tea8RBqr9Y3i4il5t0TZ2NRybbXW5dQW WWM9dSTXC4WjYXftA7X-wpiOEEsnJxO8QzxKCz_GQAm1T1UJEc5lg8oGTp3paKTptYO9Po mlGh.jpg

http://images.orkut.com/orkut/photos/OgAAAHfFrF7MvMhj8D5dqP7G8-rGEEva6jvmorwQCu0k84CeP2LZGh5oQZwAeZwrAjnvgWgPdWoj 96xmAUs5yq5KaJwAm1T1UInt5_dcCDHKKp5vSFPPojgfT4BQ.j pg

http://images.orkut.com/orkut/photos/OgAAAKdC9c_3ukWrC-YPp47TrDxPMwy6CU-MlN7escAs3z1fAZJ9QR7s5iVI3hxcqGyehRYzarr5o8lcPle4d YswW_UAm1T1UGqogrBZcDBraVvigvVIZvVwxB0l.jpg

http://images.orkut.com/orkut/photos/OQAAANEmJA_LF2bW9R8kzNnh7TLtycJqSsQxlOUqa9z75wsj7N CnMbFxlk57Yl-d2x9S8AhgZHTyerfqZyVYHq0uGicAm1T1UMCCouGTGLMsWi4nW O1n3tSvao0m.jpg

Well, folks now able to finalize the structure of the case and decided to put a PSU to demonstrate how it will be ventilation:

http://images.orkut.com/orkut/photos/OgAAACThtRqLtfvElBoVHiLWwAulh0WxhoUD0JDkWF3Gn9DLQH NICQ8bZ-AvZOQZWEVV_JZXznBeLvK5B4512ad6Ps0Am1T1UHhAZ1nLiRUp UUcHaw8Rwlfb0GKx.jpg

http://images.orkut.com/orkut/photos/OgAAAECYdUHwN9WmpflhOs5eZ_F9Sdk7e-hx0wGdDT9_xK1IGlVGoj9gA0sdaYRYRb8Gxt2-RVaeGfyiazMdxKD9qaEAm1T1UF5guCCwekwG2VobLRYrGhKBqv ng.jpg

http://images.orkut.com/orkut/photos/OgAAAFnjUt5E0Jld0JCmNODCcnfDu6M0DEmBXNquZC_StnDBHi dI781t2cRU_89iZfU2xSgWNK0J2JQo9qU4iD-w9eEAm1T1UAA4LL4Hk6NuZAuW8ElhtwPFPZn8.jpg

http://images.orkut.com/orkut/photos/OgAAAOYsHkDX0kA4sl2AwBkjH3CCYltKlvFJZlwt_OqoNjAAbI jxLoC8knvBtLUIcQjOUuELc77PbB1-RSJNmrXlEigAm1T1UIGbfl28xxu8MX1aSTgYx0XECgBJ.jpg

http://images.orkut.com/orkut/photos/OgAAAEatZjXa2a8tWD1HDZEVsBReCxQcZaoeFxMhgcGoRdC-AT2YHprOzWXnjTo8uZ5yj33EXVFDaOAbU-LFvMA7VKEAm1T1UKE22cTCUhyySRKt-ORDruEQOuDC.jpg

This is the aluminum plate 2 meters by 1 meter and 2 mm thick:

http://images.orkut.com/orkut/photos/OgAAANpSD4w2xN52-ax-rXi-eyNawP4HeVY5Nesz8pgmuj4_5b57Kcem9ck-BYOuWgZHAfnKH224pcnlMrL57zJED-kAm1T1UDSiBZEC8AGO3oFjNtHQSaNp1yzW.jpg

http://images.orkut.com/orkut/photos/OgAAAHkiGnzsecIpW-0hqgOuE2Xrz45Fk78psJjVut65Iz1TmOJFywohv2rxVGWGBDou 09rBAfwlWhDyKjBT_uYMMNAAm1T1UDGU6bopuK4QyEC_tek_bx 3MuiR3.jpg

First cuts at the plate:

http://images.orkut.com/orkut/photos/OgAAAJVgevdPi9FOKd8HjPPEHAOrl7Dqpiht53xqZnt1OYHWHU 3RrgrdVAjwcMAhocxuQTBpQmIr3x3smIBv8s0PKvkAm1T1ULlf BRINK6ha71-nq3DVFKLUp4_3.jpg

http://images.orkut.com/orkut/photos/OgAAAKpFJ2y54d4_ySZ2GfVAB8k0_OR3gvkwuqBYcshDrWL7_f jqeh5sHtCsdh4K87VRR1NiMDjZDx--lpaYqLsFgTwAm1T1UDfSMWZ1LnpawPCfAtyR7Up9pk0L.jpg

http://images.orkut.com/orkut/photos/OgAAAOzgB0Xl9phgnax0uHtGFDmrL1oU7-6IcMNnanUw_I9VKVwg3UhHbIH7WY63_loXex8Tx3D1mzlvx1WL ybmBVW4Am1T1UJz8W-45ST8N5Mn_4kFp11n-xKch.jpg

All the cuts already made and the preliminary assembly of the case:

http://images.orkut.com/orkut/photos/OgAAANVPqRQXDLjXuXmEeUkXxcCgiXERibb2X8U4TkgVJ1vfbn 25uQD5K_Y7_RW-Eg4oG_dAU_jWSXOXnYoerYfK4AQAm1T1UKhVN1n9mzYZNYzk_x ODzhqgORqD.jpg

http://images.orkut.com/orkut/photos/OgAAAMuDMSteKHVHIl4o4sGiLJb6R2bsKiP1SDPfFoAEi2naJn 6hFW53P6coS2fPhrikz3NSjNKeCJ13BJLrKkKBwnIAm1T1UKRO FCc1t80RoOLgUb8C1BNixdVk.jpg

http://images.orkut.com/orkut/photos/OgAAADz0oVpH4yz0Gw9bvodztp__VliT0cOMuhO6bAu7RqMZcO Uppntk_ON7e2mDI8vJjfWqhy3UtQxV9zE3cxYp1YAAm1T1UPNs l4AubRStMrZ1UT7BFtR7HJfh.jpg

http://images.orkut.com/orkut/photos/OgAAAFujVTCMh9pcaZ-GQyEGIbMAouqzzxjcnNyV5uU1O-kHUdw0aPKlH9UbFPKa-AT46H80a6A-Nn0L991Ypw0TgHcAm1T1UJcvi6tj2HDtQ_Jn4ppxTaURwBNx.j pg

http://images.orkut.com/orkut/photos/OgAAAHDM10JwQDG-wkvWVw5d350lUMZsYe6IyAlcfPFaNDNicz4gYYC7Vex2n-tl3Tydh4XmoHW3d-tcrQkGZ7sZpmQAm1T1UHKJIp83J1a_8yP_p-pF2RRKhVmG.jpg

http://images.orkut.com/orkut/photos/OgAAALFEuYv8Bec7oB_s52P-SvIEt2DBEp_HU78KF3TsLAjq0hOrkeasiQXvRPPqwLHuiQ8mdc 61ZCkN2Iv6VFk1xTwAm1T1UOXG9KOqBbk3Z16SFwKb8Ab9cvT7 .jpg

The assembly was not 100% because I use a tape to secure the plates but it gives an idea of how it will become the montage at the end.

Here are new pictures of how is the progress of the case.

Enjoy:

http://images.orkut.com/orkut/photos/OgAAAN3LToKx-x0guIRWYpYG7maL3hPojnjF6t9IWVYvxJGWmPi3g6MEyzlyjts 1b91sDuTqsAAbdv4DBOar9mhmttsAm1T1UKdp1peImcTUtyMqw sXZ8BEQQJzu.jpg

http://images.orkut.com/orkut/photos/OgAAAB7mMlTcOeXJGxj5ylaeFe8M4etr2j0CdHycyRh1kz8bKQ G7S5n3lLE61nFCcWh0Edna2lmBgvdigEY92B6hbnUAm1T1UId1 j7aiJcjJ9qBnULZM1B4qiGJJ.jpg

http://images.orkut.com/orkut/photos/OgAAACWlp4P7YwGjcKz-biAc-rvW-A82Aya9eopdSFtUHns5u1pq6m5ZddF-UDul4iVia6V_o8_JnGn7jz4gfWP3658Am1T1UFq8B8yT-XdwSslhM0_rV3Xwlxpq.jpg

http://images.orkut.com/orkut/photos/OgAAALKWttL3me45pBYjbZSTZzgSvOQWh8XYdip2V-dwpe794ROo1iFeNflc6v7ZNFpRtWu3bBNFx4E7GF6MF6pV2acA m1T1UOZGuclD7NB_hXnrti3u2MX5sOGZ.jpg

http://images.orkut.com/orkut/photos/OgAAAM1oRrr5QpkTegvIifeGaGkTnOzdP22SOg5j9JJZ-LFkK8rVA7wH6UaJ1kG0v0zGFVS2dYLKZzY9USGwwNliK44Am1T 1UMQtgCFs6JIeWXF_Kqsw4Vnrsekr.jpg

http://images.orkut.com/orkut/photos/OgAAALZ1mp2ZSgHJDyW3q33c45pcPa-gFRj_KBowIiI93Et9bMnYuS-uwsizUlUEHEynVimvRCl8etz9GffG5v9CalUAm1T1UBLVkC6kv 8vkWF8XN-uBmnxd7oIs.jpg

http://images.orkut.com/orkut/photos/OgAAACk6mts2118X-2H6HtGT5WYoAiU8ygLAMRo-G7cVrwvyfeIC6GXzFBMgiBroZVK3vhHnwws8J9FICPuLYzCefh cAm1T1UI5epgRQpZ-kDi9SYsI_i_VxquQO.jpg

http://images.orkut.com/orkut/photos/OgAAAOcMTA9ZLwswL7hWroHSOc5Ck5NFVipqbPQdK9-xM9YKg249zxkhXXxPKXO795u5pA3JfSqWLW5YPUVCFrtI7q0Am 1T1UPVVp0SI66I8SVOMS7RRLRbemyDt.jpg

http://images.orkut.com/orkut/photos/OgAAAMF9hZDPahHpVGPtIcYVK_h-plXPwR8btVNhHHp7bW9lKxFsnT_JGQJmB6YKKv7Z_LzBJQJVQK REx_NlD-LTtWUAm1T1ULS0r-o5NV5qs3HabsfzmiTwxvrk.jpg

http://images.orkut.com/orkut/photos/OgAAAIOQZ7tA4Gu4aB0sT6tfA8Vn5xl3JCJqFOsjGhNW8ca2Dy ulXVF4yE3PORIgPIOf5OlZW1-NNJQ2L-TshPyW9gAAm1T1UM4eVTyDhEFzcKBpe-jUZIBPWGte.jpg

http://images.orkut.com/orkut/photos/OgAAANuaUHLnMVIHx7-MMO_RZ385SwZLCg-vYzRr5qfsDnZh5IqTI0qjoja22wL_NeKryT9FHLtitbGSyeViO hEl4CYAm1T1UAjuZ18Mu3Zm-VwSO9dRo5U0bpeH.jpg

http://images.orkut.com/orkut/photos/OgAAAPDI5Jwl6IKV2LM10kEG9ldvmFTeTPIgp9tRjNIUV8JAjv sIQrON_5JQfMM1KUPzkQDDvwVjrILLCRiQmhE-uOgAm1T1UInP8j0wfmc9wn3iFEdIRePq3y0o.jpg

http://images.orkut.com/orkut/photos/OgAAAPF7alaX3zPk6m8abwxwpdUGWUaPtted0wwoe9x7Nq8_Zv QmkRco1bFfgNUAU8iiCbRxg6DugqoDQAfLjCXUCLYAm1T1UPmv Ax_r8GHvxk_v8LZ8QGJd4lhF.jpg

http://images.orkut.com/orkut/photos/OgAAACXhTicAQtxglj-vYJpnsaoZSZI9UZfJvxs8C6QK5M2UbXhOAxAwHqfCD8CIvIeuN Q9J9of_Q0E7dBytk-UA_kkAm1T1UKUpbCK1ZoxYYrreFm-xsoHJ_ay0.jpg

http://images.orkut.com/orkut/photos/OgAAAI4UeiGAZVTpKDT4o4b087gMIquMK1FPF_mnsfH8nWQ9zM XjMUoT-1ZVcPALduaLcr9CzNTcAxKNf_3CVwLMQh8Am1T1UHWbJ2V48pI N_wDuUlFPChPbw52V.jpg

http://images.orkut.com/orkut/photos/OgAAAEUgbQJ2r6hBMZdnDvkIo9B-uxA-BS2LFeMK3MQQgQ-2vuUbNH_SHwht7pxqsQJlbARRGJvFCw16YTDqOm5sGv8Am1T1U OMjwOsL6mB0WhKcJSTQlFY9nAmU.jpg

http://images.orkut.com/orkut/photos/OgAAAJgQlSaDlJmpiekCO4o91VEC0UNl9A_V45ZpjVn8W57ZLo WOH0__eL58wEhh4e5-GfoGJcCPb23wyU5a5UOaZhcAm1T1UNUS15n57tRLxaFu9jx9nd jqFIDA.jpg

http://images.orkut.com/orkut/photos/OgAAAGqme3Yuu7QW25rkmcU9B2Nd9duJXr8mtt6dGL08ZSniep D0EfV2byMI4-TBv3VrkplGFCr5QD4BXnRsdTc1BfsAm1T1UP2S33Ah5PiHzt6x P8OZYId-OLJi.jpg

http://images.orkut.com/orkut/photos/OgAAAPV1spg-_-IHq33Wn8aLRK7P-uerFql6XpvbVx39OO587MwoRHPLcx9Dk9hllOFfqmH8ETLJGJV V6F0AQn6z12kAm1T1UCRQcMJhjP39e00nLUhhd5M_R1X7.jpg

http://images.orkut.com/orkut/photos/OgAAAAdlCGyWEnJNr7QDIj0NYInNoeRZendLMOkMBcKeV19Y-KigjUPdy6329VHXZYgQk1BRGJD3sQvY02DUUY9HhG4Am1T1UAC tyvHV-CPMYYB0aTtgv-jABoEt.jpg

http://images.orkut.com/orkut/photos/OgAAACnYMtOrEIMoGM3MmD18SmMQOx_-6fplrD04Xdvz-QWfSuDjwP78PLUcuRuDJy9rFDQiZcWVV6ug6CF7GNfwaTIAm1T 1UOlxA5_vPtBDgKA1s4iPaSRU4sA3.jpg

http://images.orkut.com/orkut/photos/OgAAAMT_03tyKDp9Yd_rQ4HE539LVdixk8LZk22lOIQgdKfM9v 7VxIMGFk6mV6oQBIk7LvIgPE4e-OCLWJfOyzM1T0EAm1T1UDfHlgrYCCIqFTc-aGCJldz74UT6.jpg

http://images.orkut.com/orkut/photos/OgAAACkSUIY8Sn9BlLgHvYMa6iqfAvhKEAbgq6-xNjYSqC6FWbRO0ciy0asYJfyaZAV2Yqg4HmZZZSBVgT_iD07wh ckAm1T1UPr2Vjp7QRvgsrs42PB8h6OWwbon.jpg

http://images.orkut.com/orkut/photos/OgAAAGDYQAJCeB8UQtSrC560oC60soJpTps1QkQ6yMYnXQW3sd OC11FQ_ypAoGhLj565lzaBX-uh-ISFVIuiSc69YOkAm1T1UNBF-awPvCWAMhxNR9xUz1TQA-as.jpg

I was not satisfied with the structure, then disassembled everything and redid some of the structure with thicker aluminum.

Here are the pictures:

http://images.orkut.com/orkut/photos/OgAAALTE6-yQOrJb49uqn33NFu5bj-0nioL0BvgTXZQ4yMyGiqSmCejdFugdA2paDq8ccBW5LughTrrr dnD-okY7axEAm1T1UNK-oN79sbP2CQVww7pf0yi8i_CB.jpg

http://images.orkut.com/orkut/photos/OgAAAO1UAzt3GakMi5loZXzNzV5EWjPGOI1EJPbI0cPYcPK7H2 as0_FuIStpmOpQWjxsHGQD24b46kjt1bnETyaLf8sAm1T1UJO2 1dWxKMgcLmBzhOwkyLIZAZ7f.jpg

http://images.orkut.com/orkut/photos/OgAAANA1rnWIkMZmn15FYpupq8hX3o3Eql3exGbzQxLQMwkNhV jJi6dddt6u-NAgY2PdTgBdyvjFJ3EPBWA7XnSfG4UAm1T1UDTd16nDkJPR8vH _Se72Id8AgLFZ.jpg

http://images.orkut.com/orkut/photos/OgAAAKSvvIO32-t0f4_4A03Lzayzc1ABEqd-m8dbeYKd4YPzj_DNJXkAseDSdh72wTETNZgfXRmMatGjRk6y9w jR9zAAm1T1UJWpk1etdHHfDXKeXLA0V4J1_CVf.jpg

http://images.orkut.com/orkut/photos/OgAAAL19f4wePxbAhAwNgwTsh3eEn3zz1rvwq1bHYMcfwTLQ0w g2B67LG1zMTtNyreZn6ZtI5fepyEhT76B_C4HDMdcAm1T1UAa5 w3akKqCtpLwP9eSIKOfIDhRJ.jpg

http://images.orkut.com/orkut/photos/OgAAABxvIMhotgM8_fM6nVHzpvS5PNfnlV-1CO2INFZfg0VrK_Vd2qCp7KeNXZRHGeUjSW85lk4P8szfsk7cx eubh_UAm1T1UPNzqU-vD0l1xSphyg1MG-Sqf28b.jpg

http://images.orkut.com/orkut/photos/OgAAAK8pj_TddDaxvg8-sVXhVNSUAMqOOMd8cXvK874Erco2i6KYK6OCwukgZunh0zC47P BFo7bgvtSFjLE2s_dkG58Am1T1UNkAP9d9hx5ARcfGTSG5cB1F R_VO.jpg

http://images.orkut.com/orkut/photos/OgAAAPWh9knqDuzvlHQ0HiH6pvPs1jS7X6QcWj_Gia-FJaUcEkyAGl9iKwyEkrmpUL4_oWsTqaBLSzejBfvcfB7gOqsAm 1T1UEpuNWy6XlIfzdYgfg8r8sbzlbAf.jpg

http://images.orkut.com/orkut/photos/OgAAAB2X3iiCKjRnfnscGNOgPYNA25Kl_UwabBwdpV9IV9l9p9 GTJ99dXlrb4HzEsp5tj2D2y7s_ED5yuOZvnxu3U60Am1T1UGp0 0wBADqdCABHQ94DLEUmVvpIW.jpg

http://images.orkut.com/orkut/photos/OgAAALBhEd2hrjABM3dgoGlGlWWKqyzOyBJfQXqul6W_dPS5Nq USunmcqh0VR7qcdZkTXw4BZyqYNpdNqddjzeAy1zEAm1T1UIIf KehagHWXYie7ktl8MyecJLWb.jpg

http://images.orkut.com/orkut/photos/OgAAAJWBCTNkg95Jro8t3pTmzhWcSUE_8FFsDa3sf42R_n5jP6 zAdSJeV_bMzGldg9tlXO4GNuORDhipTHMaCCRr8LsAm1T1UG_t U02jCErCWMXgWe9FT0bGoJKR.jpg

The photos of the structure 100% ready, i had a hard work but in the end everything worked out ...

Enjoy... :up:

http://images.orkut.com/orkut/photos/OgAAAAgYut-cZjBS4E00N2APquHBV0nr2DoMB6VfZrVgQe0c6J8dwZ65Mwhrr ZmrWHP1TMUXnl4NH_z7uWUUEGlFFykAm1T1UO_-ELnZtzrbGfsEXvauQt72WTwV.jpg

http://images.orkut.com/orkut/photos/OgAAAIbAzyTDDSvb-EujPIkLnnVCC2UspKNGxwmjTM3UDIBNeNi4qxvh1_lcwMOHA1j lvmbBb4MN94aGDukMv5_3pgIAm1T1UJuRovMBtWn_LGHTRIxHJ VxtT-m-.jpg

http://images.orkut.com/orkut/photos/OgAAAD99XpZVWnXD-2WZWeikIxSuO_iowreIuqJ9ex8jc2scyUiT_inDE29RWXpkGfQ geR9ViSBnUbjDh4_DOuQOVuYAm1T1UDVF91DEkWl8F-o1oZ06ELPU9v8-.jpg

I made some modifications to the case, I painted the motherboard tray, lined up the structure and decided to test how the case would be with the fans from the bottom of the case.

http://images.orkut.com/orkut/photos/OgAAALG8ENrM2BfhRq2oPXaiyEJiFNywKmCNtjvUCIbob2G6e1 tkj0KerueMoEsMGRwP3AhnofbCr5_yet_f-3n7isYAm1T1UOlZW-WuZ_bcN4ennXgX_kVokEBD.jpg

http://images.orkut.com/orkut/photos/OgAAAHlhrGrIWu6dFCvKgvQ-8n-IT7fyXTIBnxjSprWchdKiZUpAbgBlCI0gURjgaaGsBi8dFLy7E aQXgEMWTERQlakAm1T1UMbi4xI6CQRduDc5iTx7isKvTGgI.jp g

http://images.orkut.com/orkut/photos/OgAAAOMO64oM4_e0jSib6sQE_TSf7PPfLjZ-eXXc2hHoT1g1He_5jPKuQ4iq7TGgGZOMiWASBoOX5LWAyqyi_W 5J60QAm1T1ULm_LhrUq6hiZhmRn2ZUsorbu7oR.jpg

http://images.orkut.com/orkut/photos/OgAAAKBeYW57ioHHoY9DGpqJh5XwkMbIjV4vQUBvAoGSCDJgt5 P0fKAQY_jJ-UErgw9C7wFUmY8vVapmh89TqZvEWFAAm1T1UIkuf0bic5KTr1o YTnV57O-l2suG.jpg

http://images.orkut.com/orkut/photos/OgAAAIVrlLNrBWDhkH_H9o5t-czNtGPF1pQHrU_Bc1wvxPc06UNmYZuageq2-SIHhuSrR7jr3EtB85lpFaE6aOJH9LAAm1T1UItQlFiAyLqniu5 9sW1oyGUnB-sv.jpg

http://images.orkut.com/orkut/photos/OgAAAF24jYGVBioJyfrmbgtt5N5ZTEAxgoVusToUCuFyeKhL1N JO5lkHB4I5P-80lgQ7ShMiKKcddCNUJLPD4-C_Ir4Am1T1UIY4uGJS-4-u3j-HwnSZ8TxL0hy0.jpg

http://images.orkut.com/orkut/photos/OgAAANP_TRcgY2-E_a1qOm1EzUr8EnF2aBAfyG9G0e8zFLHaDEWqkPk9PHMq3n3ye ghe6IpWF2W74jPmnc9JMz2VD6gAm1T1UDywO0HqSYHXk8y1HQ-KJHOZVAtq.jpg

http://images.orkut.com/orkut/photos/OgAAAP6PMbCGfrY4hJxboV3xI8vtD4AW4ywK7G73vLmS_awWlr 8y7ySzOiTwWbswMUMI3GoQBPTSYRzAURnTTKMEQjoAm1T1UIWC 58rANsMlQ4jZCB4K5A9Rmuht.jpg

http://images.orkut.com/orkut/photos/OgAAAPViAzNZ-8BLGfnCv-LzULct55a8NgzSehZk0UMYNZiYaX8oHA-RkUW-6R0DTvrj7fkNCzS4XFqV4XEfqw6yA2QAm1T1UOTuBjfm5vZSEB 1XWFHQg2ySwr07.jpg

http://images.orkut.com/orkut/photos/OgAAAMx52ynvIK82vKU2PcSnX489yQyPDF7mRlaa1CR6vBQCyB nHXdzxSOCfelJ9rSvQlCZdgoWGz2v1hoLNb40BmpkAm1T1UKDk NjpTs6mv1-9WOVIQWKIMqSXF.jpg

New pictures only... :lol:

http://images.orkut.com/orkut/photos/OgAAAMNcl_xMGTfe7KvTspSaTXbOFyZBR310hO-XrU5kKp9X13BI2Clx8Q3xc6HxEz8Mn9OYYTOwX6sF9Qo-CIsqdOgAm1T1UNjtOYvrHWU013vTobkkpz_q6zI8.jpg

http://images.orkut.com/orkut/photos/OgAAACBGI9BfKJYFPkJtb-c66Z1FcPYrctGN4rgHwADKWbKPyBWdhp5-Qe5bqG5vlhJmZD3jV4X5-JaPBWf48YWAOMEAm1T1UBFlTttjp2YieEC9pKbVgU6tbnAr.jp g

http://images.orkut.com/orkut/photos/OgAAAKUgGkZrRuq9-5oJeYH0N9QKNrAqrC2bVEYWnEKhWjpwhsDST4toUXfvHL_XAC_ YLEp-4X9l83cKCQcRhA5RP3EAm1T1UEHKWv42WLx66R0MUFCn_JdAWw _r.jpg

http://images.orkut.com/orkut/photos/OgAAAAH7jeZ733idXgxPRczgrzEpkooWIVErHu7dFP4Ave5_RW wZRUTsnTU2X16HhLBdUwGTtYEz94X66Ab50VPEAi4Am1T1UIf4 pcSjfxvTTQQgOk9WZQURoM73.jpg

Finally the water pump has arrived!

Very well packaged.
http://images.orkut.com/orkut/photos/OgAAAP9jhEEF8lv002rkR8vj6K89hNAMxcxkovwPz1mMPQZJjH Yx6VRKHJq3Shepd1l5khLGzerRC0yyVbTR_6_7eFEAm1T1UPzi vibBIW8Eb5QQK7KAjeL1Btle.jpg

My toy
http://images.orkut.com/orkut/photos/OgAAAMUqhA6JYudK2W2TEDSNUnhYsgmMr4WjTdADv-Q2n5rhrNdZ5LBdviOIjQhoUViPJ4jILH7BfIpBjISzC5rAsa4A m1T1UNPmVpm9W3uhW9tzKZogn3jpm4Mu.jpg

http://images.orkut.com/orkut/photos/OgAAAIj5RER8rwnwvi9V-piGfylxFcGj5kSY8aJ7tXvDdge-xb1aydoA_UNYy2qnFnIRGHeM3DWdc2cMtEzEnqY-ye8Am1T1ULe80okhDA_EvwqqCqxUekjt4HPf.jpg

The Fittings
http://images.orkut.com/orkut/photos/OgAAAE3v6FkX-1YHIghzJt3519P0BVrrFBJTign9oqlXjO_ZCC_czKbpG40h548 DxixClQy0nBfnd0UKPS4iSCp8pHoAm1T1UC3M4NPiNm6Fyc0Go h1D_lCGE50R.jpg

http://images.orkut.com/orkut/photos/OgAAAHwImuvHhh3w_vbfm7OYDcw_nT7fynmwen5rcMok90S9N1 4wamr5V9MKObq74CoM6ZgE-JAnAMRav-ZYJy_trfQAm1T1UGIROtyokMiVPhvADqIrJDrSnvBr.jpg

http://images.orkut.com/orkut/photos/OgAAAJY6jvv1W7OYSGLeD22LOEhcCULrfwqpQQOUKoAW7_kW_d UnVoL30-ACANqYlKczEhJrJ2vxf8I-gcyYgm2ksKsAm1T1UIdcYI7-Y9sZNsbkO6y6Srv50p7w.jpg

The pump
http://images.orkut.com/orkut/photos/OgAAADwCWkzolqfU-2iw2ZvzrB5a3NrUHgzC9Mruo710aiOB667xLmyA6OUJtaeZst8 SkOAkb2T0JnftzFja7HI5YSsAm1T1UIPmTbLzUrN107B4OAQQg yhwHkPz.jpg

http://images.orkut.com/orkut/photos/OgAAAMREcadEm90RIxeolUowT1co5pTpaF3qaJpqwz5YOKUG4o UYKq6e0qwuysjHM6qMhY8oEdnzUsww7tmF2B9qGv8Am1T1UKeo ppWWGWgnMBysjQALaMgE6Vuc.jpg

My atual problem, are the feet, here in Brazil, is so dificult to find cheap materials to make them... but after some contacts with my friends, one friend calling Yemerich, helped me with the know-how to make the feet with acrylic, and i project them this way:

http://images.orkut.com/orkut/photos/OQAAAFeoWaJ1cw5Q6JEYCNshWczdn08cj_cLh0oiLFIV6D6HSD NQ5ArIPKPW1mBNhV9sVJR5ELDhOnP4or3oFOoLVGYAm1T1UC-1UY3j12xhMLWZb3iUjnQrxaGf.jpg

http://images.orkut.com/orkut/photos/OgAAAAbokn8snUnF5ZIFwV8CRBc3J8j-G5KoRnfu17a5_Y3TwOW4U0uWrhIC8pE5mpO_2K50VEnByr1smr 0x2yNHi0AAm1T1UB6gi9XLuMBkkbAMKAQl52v4dpJq.jpg

http://images.orkut.com/orkut/photos/OgAAALNmlAK1kaqQDBx3yf0qOc9ZTE_7XVZNZybU4AQXOlUm5a sRqy5KBVAsUwIkYKhk58P2ckqEwwQGVXATskRf2LMAm1T1UKqO vSknBDqYJw2qoAogdGnSBgIU.jpg

Here are some photos of the acrylic parts of the feet:

The mid parts:
http://images.orkut.com/orkut/photos/OgAAAIdr8LG75nKY_OIpp4cguNi3VWzjLhJKhcMhzPvzu2D0dO TaSZ4MpjUdzb3p8RvqCej3IyM_J3jC8de-HZmqL3wAm1T1UPX6gGgpXo8dFOSIExCAziduwVV0.jpg

http://images.orkut.com/orkut/photos/OgAAAFHOqQTo1DdiryQH12AoHb_9k6nSfC6ZakNj47upXnDTvH A8A20E_gsllJQkzV-WSGqz3zuzdi3VwYVhBZH_sh8Am1T1UBoSo3_ewTc6T-atlzzCGethrsKU.jpg

http://images.orkut.com/orkut/photos/OgAAAB0sVCCrbHhkykg9qSEyrLDsT0YUNObTyIo48L3IkSYsvN Mv0YOEtml_AbkWnyFNLnNMqgAqTdPgBHUhVx11y4kAm1T1UBVy fFTDyKVmZM199dICLRVt-e5I.jpg

The lateral parts:

http://images.orkut.com/orkut/photos/OgAAAGFjQQiGJDIiczcABV5maaERvCpVHALZk-kPkfq25LelKaS8wOhYstEVb37SVeRIudO60cookPJhhDxeRmlx _wUAm1T1UMO70pcFC-_84PHgxd2aYyDQZV_5.jpg

http://images.orkut.com/orkut/photos/OgAAAAAtwErzkYNK1sYtDgMb4_aHCPqmgDhbNp1wga7HcjSl8s EELcEJkboKpD2JSf1VVrCrNsb2pn6AK6gdtEXpTMwAm1T1UD1K etR8c688ySTnvm8FZwt1mlJP.jpg

http://images.orkut.com/orkut/photos/OgAAAHiMxwnau6M2-PWqpH00ICS3-me8dQ3x1K8H1c9D4oBCRQQK0iuPJQE_mL9utoxEtD3r7irg7hL NAdCHODAVp0IAm1T1UHub_4Dhzdv1WN0UzmV5XYtIyiN0.jpg

A preview of how it should be:

http://images.orkut.com/orkut/photos/OgAAAJKu8aRWuYZgMtVzTt-3E76dvA-9NSnvHb5kRak9itDP5jVOo7ydSQ8IYBgtSaVxjMWUM4a-ujibdvuZGRgKal0Am1T1UEAryzhYC17qRzamLRUcNbDzIGef.j pg

Photos of the pieces against the light

http://images.orkut.com/orkut/photos/OgAAAAetbMZyjUZG7KfQbUAaYpqwA2TQcsECLY9C-ZWVgPk6zAcqNU7pQ4gMGmb79XL0EqQbX7DvN4ydGr6qZWz0b38 Am1T1UFdOeKTwmDPxD_qDNE-X_W_Msrvq.jpg

http://images.orkut.com/orkut/photos/OgAAAIv8_Gti4DJHs_-QaXpK1dI_8FibuPx-_2c_DKYDV6D3a8pXQJp2TQmtrIWY3WR976ubUJanx4iJ3xg6jj dpW-MAm1T1UEwaB6kNNCGZJ4Gonh9uJTosh0P8.jpg

And as a bonus I got from a businessman friend of mine who works with aluminum, which gave me some tips to the case, the perforated plate than he did in his company... :woot:

http://images.orkut.com/orkut/photos/OgAAAEn0yiryWRX5Mh_yKEyBX_B0iXhUTBF9RtQWe89fNIeqHt V4YrGE0RXvsQJgT5kXWfRlR9qy8zJzPIakX49sunkAm1T1UN4f i3e3F-QDzekxNEzwflHpx0uI.jpg

Of course I forgot to tell him that the case was black, so he sent in white paint ... :lol:

Well folks, now the rush, I stopped a little and even tired, I made one of his feet:

Makeshift bench:

http://images.orkut.com/orkut/photos/OgAAAAFSq6FPDATQbAqXu1yRwrDJlT_FaPIudGIZ1o12Ha5xIl 68Nqb3ev9o-jERiNvOW-HmMK9g04j0eQtZVvuIDY0Am1T1UHp_AU_R4yoGo1A3CJSLkI5X cN1F.jpg

http://images.orkut.com/orkut/photos/OgAAAN7PBVLP7AQMFavGpSborlqUXunAgnlmDBvmRmmTw5cKDK k_Mn0rrYZlf2IB3g8UIJm0ad4CmZpxhzKVeAiq7_cAm1T1UF3N WUo1nJZb1yTjkY4RS444t7DB.jpg

Sanding foot (filth):

http://images.orkut.com/orkut/photos/OgAAAD5ZRoN8O_AOI0JfSlnV_SblT4Sg66H1IFGVhj8jGBqZH8 tex_ooB2PQSqQRGcH33IR_6SCGrxaIk29mfmhj2SYAm1T1UFCf VPjHFC5d1FNY6yYjqHbVZW3B.jpg

http://images.orkut.com/orkut/photos/OgAAAO4pCSwjSK6PBEp5gGDh94ekHFZHn02VjRNoPbJWfCv8hn Ej6ZAYW8Y316KLUNXyJTGDZ2X9WsX3TzvpUEorm08Am1T1UKdi mUbIhlOPCMw6gRqIaqOq6RHj.jpg

Feet mounted:

http://images.orkut.com/orkut/photos/OgAAAMOiLO1b0fWs8J-d2F7_JcKiDRz91WmnHAIXdc84PmsNxp2uvJg-e2z9oy0-S60syEaYjlSQ6xs8ovxuoBG9yR4Am1T1UF7NX5QwrE1tSjinIO JRC_rpY6cb.jpg

http://images.orkut.com/orkut/photos/OgAAAFCbTHs2pmA0LZC5wrcYbOVOf2nFj0GjY7zt0SKor9zsdd vxtynrcNv-2BmQ0vNp17sD_cy-QxxF6WSVsV4OpV0Am1T1UA3f8tcXUljvq3oQh6yra9qUC65n.j pg

http://images.orkut.com/orkut/photos/OgAAAOaoJu6OSPoUmZLOUO3StPU5bixf_cMAw_synHTfq1jAbm nD8--YS0x3QrfCcTTjM4BiOAC1Y6wiyxMOlVqojDcAm1T1UKYFaK0zQ pgtNj7fSP_Rlw1EcFBz.jpg

I took some new photos of the feet of the case: :D

http://images.orkut.com/orkut/photos/OgAAAFkEMvBDC_zRGtvE6seFbwjm1khRoALiTS_8BwWJHgjgyj pV-FO8a7LG6eh6-SAQye-InY326XNt3Tq6elKm4EcAm1T1UEkrFssD88if5eloIaXWu75Pe znE.jpg

http://images.orkut.com/orkut/photos/OgAAALl_XVYeXrwT3qpJElwsgUY7vN9cYEh70fw00PWyzPXJta QAwfuke7b2M8Xnv778-wUxzNRXnkq5aV0voeOrRGAAm1T1UJ__hgrsDrvYQgFBRItKHzq 5JRhZ.jpg

And for those who want to know how I'm doing to cut pieces of acrylic that is the answer:

http://images.orkut.com/orkut/photos/OgAAAJ6PDGaARpvEb2xyEeuMf-c8elfyUaDk2_PWy77cr0HsaSD-4j-_BxoimwqkmMo4s6QQQCcXNqoDUkNCLh3sBGwAm1T1UO45xIjS7 NZslxay4XKBHcO3OVQb.jpg

http://images.orkut.com/orkut/photos/OgAAAPjMbxbtOyOmtJ4ncGn8hdCMYADmGdtr9m800q_UknlTaX TafG-ZbZmBeSK8cP0CBKDHK5ix7VJEuLznyXKWNQEAm1T1ULPFlcGQ8 RNHgtsgwE0upyTjeVdp.jpg

http://images.orkut.com/orkut/photos/OgAAAKERGyXqnGhEbrwmq10wjVgViRpN2msADriDaKm-JzOyC_kaGUaedyjRbW3XtWrET-XWJXAM9Jf2m35waq6ixGUAm1T1UJ2BfH01obN98-ilX4FHPmiGniBf.jpg

http://images.orkut.com/orkut/photos/OgAAAMtn3ySfVn3Qa0HuoNAQIjNF3yQRzQdhyW41G-7EM3BudDKfY3fEtmDquaj7A9j2AFhZGeUyz0eiKleW4zu0vKMA m1T1ULikOmIIvRwQQ0EMRTWO_JsvoY1v.jpg

http://images.orkut.com/orkut/photos/OgAAAOWwH5dWfo1I77j1u78Hu2D2XMk-jk1JIK5DWWoZaoPOW17c-Z3r_3Z3jRyvF6Fs8HPp4TQPEN5WmN_2Z3_xZooAm1T1UOJKbG5 GVlwLIHPorlUQHwHupVNz.jpg

Here are some photos of the feet, already glued, missing only do the finishing and polishing:

http://images.orkut.com/orkut/photos/OgAAAI47UREwYjbN7o4AnZa8pzzCuX_CCMXwW1GafR0-afblMp5pMpxP-dqjvItZCcJsvqAIOjR7Q4SfeD-iFIlA8dwAm1T1UPAdBjBkpTq7-XtveZH4GfK-Eqvi.jpg

http://images.orkut.com/orkut/photos/OgAAAC9dViMtWwSVbeR-BLd9XdRbWZ0zQ66UMGn2uXm24wxIvLaah-xlg7A7dbTjh3rmcJ6KfhPtSCyeqDluRdX9FXkAm1T1UB1MOzQZ nXIJI92LgSbtAtOnZVLs.jpg

http://images.orkut.com/orkut/photos/OgAAAFFi7vNT08RBh7OdfnIvEa64XJ0urUrHlzEHSvJ5TtOGoS s450YVcMQOQ_FXFKwJttzI4W0uNXDgKdUvTxxbjSMAm1T1UBRm 5iVVnC1SSNPbmJXBQ_-4TI5P.jpg

http://images.orkut.com/orkut/photos/OgAAACp1UGaOF_XUU-2-JF76cl5NLmvoaJJ0O-27jg55ZwIKFYUIdLoIls9jSITdvJkEsKY5fI33feah3eaqF0Om h08Am1T1UHOs142bqTWe9dkWpTm7v6Z4plI5.jpg

I made this picture for you to see also how is the effect of blue acrylic with black (got a little blurry but you can see the effect :wallbash: ):

http://images.orkut.com/orkut/photos/OgAAAM3aA4LRBYX7dulwhqI8wXKrFDIIORSOYNmQjJWjbI38qn k1J3GpLJFMOW_hv55VQj5WVv4h8xl4qd_wK9fuxfEAm1T1UFJ7 1cwyae1d0TBtWXcqxgmYcjc2.jpg

I took the case, turned upside down and was snapping the legs with normal double-sided tape:

http://images.orkut.com/orkut/photos/OgAAAAGJYcnwzK4UfBTE2YBLV9CAUdvwlSdwhpwhzlmR8Ub5Jm 4scinA52-NWHRmwopOU915VcOezDKe4aDvClhfIKAAm1T1UMzV96iKaupwa VEWMyMPev1AeKkk.jpg

http://images.orkut.com/orkut/photos/OAAAAJZ4radGkpMUrIxwAy6UDRh7owHzM_ET1S6UbKWtc8athf 29vrq33GnlnF3-zZ_6Atb6NyxnonaFzHymNvWJnJwAm1T1UMYUJVM_PyMitgpxov KsES5vmGkr.jpg

http://images.orkut.com/orkut/photos/OgAAAE28jXx4WAVpZp_AZUyNH_eZZLhZZ6ynC4NkyPnsN497yg 52M2lTJcsduW1JHnQ_LaIYGnw5Sl0DWwOAB46-20kAm1T1UBeW_0kZfmdv5NOjcMWRCoanetBu.jpg

Until after all seated and dressed when I'm turning, two of the three feet fell off ...

http://img697.imageshack.us/img697/4811/fuuuuuu.png

So I had to stick the two feet all over again and now only when the glue dries to see the case mounted...

Another thing ... I managed to find the much sought-sided Scotch tape (3M), but as I know she strong glue, not put on the feet ... and it turns out that :banana::banana::banana::banana: happened with the two feet...

http://images.orkut.com/orkut/photos/OgAAALP7vjJ8D9vWx2Q95mzo_zE7ZcKfRUrIWJKYDqtEQjC9hu Q04J9s2_aAS4_qAJDvHEMDe1g84ae-Vq_MYEwaSoEAm1T1UL3JriFb0g96bbFZ5_EuKHxwkNji.jpg

After that :banana::banana::banana::banana: happened, I decided to make a montage (risky) quick feet in the case and took some pictures so you can see how it looks.

And here they are (are not good because I took at night):

http://images.orkut.com/orkut/photos/OgAAAB9kY68OcEcY8AtODxQbJyIZlqgyfnGtwpvbQB1n37BAPt 4uDGYcCD9T_CpfXWtssVkg6iEUlE_EQu10Up1e-ikAm1T1UBhEgxP7XDxNpgFGagXoWAIfyqGS.jpg

http://images.orkut.com/orkut/photos/OgAAAGpY8veIVWlqoOcc7Jdegf3klNM7xm63hajb9kO_-Few2WAm3u44zFWQr8JBfhatp-82veT7-32EZfqtDVUYcecAm1T1UORn74shP3JCOGQDzigkgqh5tCpD.jp g

http://images.orkut.com/orkut/photos/OgAAAH0ytKAtQnvPKPyv_HBl5RH6W-tPry4ZWk8KfE7uJ1j8UD09EnVXrrDCgvYiKPkE0cyyeIrZyWoT 3NUlho_ua54Am1T1UCpLxFwVzxW1iX66izea-zcnG23-.jpg

http://images.orkut.com/orkut/photos/OgAAAG-6uLzWunD2BWuqnBV-0EtQJyxti4-mUWANO4P-p-b0_7bXUDoDPgxi2T-1Gi9XyoVi7Ju2nwg0AbuH5DzGvAcAm1T1UMzHflHh9gd-hCna9XW1G6zNJGXi.jpg

The day is cloudy, but i took some pictures.

Hope you enjoy:

http://images.orkut.com/orkut/photos/OgAAAN4Goh8rd62rmFy-IwqUnfpuZkdOuevPGvz2LW4vT2wMv8yV3syH7Ql97QK-IAkq1jAxCqa_Jl8J3eUNTn0xmOgAm1T1UN7l_pjRx2PRm6zFdf kDCiI72rZr.jpg

http://images.orkut.com/orkut/photos/OgAAAFvKVi-lGco2fqc9VsDMIjnMZSBZAlbWkH6VtItKq_N7y0Viw13jz5_jW-haRuft0nS9GIMt_Vj-m0Wd-pIJ6uMAm1T1UKJhe0GQq2dGWpUB11OxQZkBG_xW.jpg

http://images.orkut.com/orkut/photos/OgAAAKmSc3yO6kfDC-ll8oQI_m2heANGcYXr3owDcbcFASqJ6voEJ0lqffa7-y86xm_3D3boRpdGUB7fORxB7O18uzkAm1T1UG5-8Vf75Pos-IcPK6ob2wLFRvoi.jpg

http://images.orkut.com/orkut/photos/OgAAAE94VnE1d2Xk48CL6_ajD3ACi8lpyOlYbDzL7n6SwE0pzS HiV_m0Hd4aQzb0xM-MHkxj2FDSpgR9KRLmLJaKXSEAm1T1ULHaRUkuwjLfVNWPAGIGZ TFv_14U.jpg

http://images.orkut.com/orkut/photos/OgAAAOQ0SjB8EoWNkGEPCat30HJyjorchbID3d2TQuhMtIT3AW dUDKrgwjnHhzWWSTdQKhAzG1FsvUKeyF5H3xTOi7cAm1T1UJ0H vHa78-Wjgq5N0J3sjh0ATM9d.jpg

http://images.orkut.com/orkut/photos/OgAAAJ7rRwwab4S9dJ1n-gSUYw6iTFoV4dzpSwF-luZNAg88splizQKVODt61OONk_799HGD0_9oAyi5B_HLCC-MagkAm1T1UJARzQIT-lJcAeOP1LNwhYBh-Z-6.jpg

http://images.orkut.com/orkut/photos/OgAAAJcpU6LKEJShlnCLtCh40R1wRD50ok-1yEziEPBWdS7Rp-LwtrNJfdgF2mJMldM1lBprbRNvMU7GgFx7uq9cbA4Am1T1UFnX SiS9E9seHWEIeUIqDnYNbQzL.jpg

http://images.orkut.com/orkut/photos/OgAAAIopwBT9eOglry-Pz1pLiRsrQmN9FIXZSytPvwEq7Pmouw8GBPNqyLdEMAIAV1RJ4 MN9v180ZNyOQcS8lIXPVowAm1T1UNvAAnb4_2RgmSOwYbmZSoN NLkMU.jpg

I replaced the perforated plate that was on top to see how this was different and I thought it was better, as this plate is already painted with electrostatic paint when sending a black electrostatic, the company that will do the paint job will take this white paint to black.

So I could take some pictures so you can see the size of the "child"compared to a CM690 (the photos are not very good because the brightness of the room did not help much). :mad:

And I have not put the feet of acrylic in this comparison. :lol:

Enjoy:

http://images.orkut.com/orkut/photos/OgAAAKZ2tfbKQ9i1VKJimpuS22Kw4Z6kr7239rL6cCD2VKB7uQ qrBczlnNCubwGJqKOWLbmAAjjDvRJ5rkz0iQD7nJ8Am1T1UGSV vInyY2oFwNlM9_XqpctPpK7S.jpg

http://images.orkut.com/orkut/photos/OgAAALv5bbporu-qUziDvkLJMzKHTuQBHM-POgs9cAzKqMCNNVzOCXz-vLswMJYfrQdVCbxKwe3_ORvkC3LQaOHpv00Am1T1UNrPkWi0IA aVkBN1xGvKJvjMqOvS.jpg

http://images.orkut.com/orkut/photos/OgAAAO8Q-74J5KsKFpPRO93XPIa0NZpWMfNVrUqXVfVSQaB3XJteGvbbEjq auXdPwp63mYGeOBQHFVvM_ypRl66_je8Am1T1UIrC8eA6A-9a-Owgji_YT9nr0mKm.jpg

http://images.orkut.com/orkut/photos/OgAAABSvZ3cHJcjm2taPG6b1rFBV4aVi5BsFV8PF_FlX5yZSgN TvAVvXq5LZvLtN73VYYlpOPoIUjJ-PFJpSUVA14iIAm1T1UC-ga6_4Yb7P3BDTtaSnTPEJSMHf.jpg

http://images.orkut.com/orkut/photos/OgAAAHhxlXWzADpl2iQQqx-q8MON7hggcrwJIYxudWi44z_eT9KkZtdEU1dBWqsRWgLyTu7wA cRZrcq2oydD-jozv08Am1T1UOLfWzYrwbGieSMZXs8Bqe-aWb5G.jpg

http://images.orkut.com/orkut/photos/OgAAAKZy78lez3l932aMM62JIvSNs4Y7jaqPLrjIe3g4Y_kC1Q nZlOyfOH5r-NArLRPXvJA9RCIkzF_e-PV1SVZydH4Am1T1UCZiUzBvJbq7ynJmFuXkdlRTYb6u.jpg

This was a summary in pictures of the last six months so far, that was the time it took to reach that stage.

Now I'm waiting for some orders come to move forward with the project.

Hope you enjoy. :up:

[killerxp100]

Talk about having some room. My guess would be that you're not going to be using that desk, lol.

[Marcos Viegas]

Talk about having some room. My guess would be that you're not going to be using that desk, lol.

For sure the desk is another... this one barely fits in the top 690... :rolleyes:

But the new desk is very well directed and will accommodate the Mega Box. :up:

[Frag Maniac]

Rather bulky yeah, but ambitious. How much money did you sink into it all total?

[Marcos Viegas]

Thank you!

So far I've spent in Brazilian currency (real) R$ 392,00.

The equivalent of about U$ 230,00. :up:

To give you an idea, here in Brazil the 800D costs around U$ 700,00 and RV2 around U$ 600,00. :mad:

So I decided to make my case "custom" uniting the two is best. :D

Going out a lot cheaper and will be the way I want and need. :cool:

[fatherTime27]

Awesome. Ive always wanted to build my own case

[Marcos Viegas]

Awesome. Ive always wanted to build my own case

And what are you waiting for? :shrug:

Start your case from scratch now! :D :rofl:

[game_matter]

Looks sweet, but does the feet stable? It's seem like a little weak to me

[Marcos Viegas]

Looks sweet, but does the feet stable? It's seem like a little weak to me

The feet are tough but, at first I also had this doubt. :confused:

But after installing the feet in the case, I saw that they can withstand the weight well. :up:

[game_matter]

The RV02's price in Brazil is too damn high, even in my place (VietNam), half-way around the world from US but the price is just about 230$ :confused:
May be Brasil doesn't have Silverstone distributor?
/sorry for my bad English

[Marcos Viegas]

The RV02's price in Brazil is too damn high, even in my place (VietNam), half-way around the world from US but the price is just about 230$ :confused:
May be Brasil doesn't have Silverstone distributor?
/sorry for my bad English

Yeah... here in Brasil doesn't have any Silverstone distributor...:mad:

Unfortunately import that case is too expensive... :down:

[Marcos Viegas]

I have news guys!

The switch has arrived!

Very well packed:

http://images.orkut.com/orkut/photos/OgAAAL33wK4lDSwbFJDFgI39XYxPoVAtfK0HjASLhfMtMokvsV Ls3zSidITUE_Z-rl-USgH1vL6MEUnYgL3zpRz85mQAm1T1UHcKJLGaU09gY7tE-5GfdzGgjR4U.jpg

http://images.orkut.com/orkut/photos/OgAAAMg86OmVVHHyDuhZYBkK7VoNSZrTiFzGo1LqCDTomlwgrU DAcnTy_NsigWIpPa7LVQE4Z2UbUa4Jf__OaZC-D9MAm1T1UHHpO_Gy4tqrpOAqWhEhXKJx9Fgh.jpg

http://images.orkut.com/orkut/photos/OgAAALDqPMJgfpid_CNqvoIkMZbe94d29psrSAjoKJ8UGYi59i 7wxbvcinVCLEYPmIGjitw0-2p2eAwqUDnm7k6gIj4Am1T1UOkCRfCIODZnf58qUt_ayeJikqX v.jpg

http://images.orkut.com/orkut/photos/OgAAAJPR8uDj9cZ5y10iQKA1Q1umwO1UuZge6wXnTd2VNmwoNj 1Wirh-RKaJtee9Geas6bvJMXD_bPl_uxt2NCsCUUwAm1T1UF_3JZSsWa gK9l6BMO1H2-YLagHP.jpg

I tested to see how the LED works:

http://images.orkut.com/orkut/photos/OgAAAN-V8KNC7MVYw70Wg7-tT8nUzIusrTc3bRIyhN_lz2rzEPpSxNNbuTXrGJ30br74v7_Rq 0R6GUnPFneUHPiKa0UAm1T1UBmeBzkNVnFvcY4tA1tD8nOMWIN 6.jpg

I'm having a problem, the switch is all sealed, I think it will be impossible to open the switch... :cussing: :cussing: :cussing:

To give you an idea of ​​what I'm talking about, it looks like the switch is:

http://images.orkut.com/orkut/photos/OgAAABpL9pV3tlgZiNhNojkhCaXV5QDikaY3Gmh5NiI4xeJbEQ 3MMroomlX88uySBqxXgJo9ZkVHklGS_CO5GFvX_94Am1T1UHM8 AyMBmVGbjT5l_VSrrycQElDj.jpg

It is made ​​of aluminum and has this white piece of nylon that is not subsiding... So I guess I have to leave anyway and not use the LED that it has... :cussing: :cussing: :cussing:

Does anyone have any tips on how to open? :shrug:

Pictures of the switch:

http://images.orkut.com/orkut/photos/OgAAAP1QONlzfCEp7xRVBNpPkDcQEdu0mU6ehaXJBgrc-kxzhb4wQojyGy1Zmedgln1pB4ihFJgk3qPVPZL5uvjDhEMAm1T 1UD2yKHHvGr5yze8zpvCfTQTObloS.jpg

http://images.orkut.com/orkut/photos/OgAAACkWp9ZD6bkpf7a05xw7Kh1fmGgmba3jSt5AS3N0MLhEWj b3qxayxck8GzKFT5SPhMmq_Q0ynwlwfR3AmhT7_ucAm1T1UDqk Sv008uHiKw86fcBztICwi2Mu.jpg

http://images.orkut.com/orkut/photos/OgAAAGb40dUEz-M_ICPe06aIoZC699F0l1xezKljVovP3Yo-CGzQ-DNB6Agkyy6N7eyO9NOzkFmcx6ip3FpeRbcMZXwAm1T1UO8wdA-KBghMpxkPVwZkaoFThrTb.jpg

Next step: cutting the frontal plate.

[miptzi]

waiting and wathing....
keep on

[Marcos Viegas]

waiting and wathing....
keep on

:rofl: :rofl: :rofl:

wait just a little more... :up:

[Marcos Viegas]

Let's get to it:

http://images.orkut.com/orkut/photos/OgAAAHNI22icZXWS2gAY90baXNkPGtMN7uRzTtTJsKtZXY4Sv0 qkD5ZRTFvYiFb_ajAJYVITxlN29rD1_UHVj93aPBoAm1T1UJSc yJwTp0sJccgF86FZQKoNz9D0.jpg

http://images.orkut.com/orkut/photos/OgAAADUEKdOuwMWb-fvzzGkZ_4vJSIMEiEifoWCMO2epizFQ9KrK_HmxxS4fO1GlnY5 EdHJxN5NtleW88-KIZYzSitMAm1T1UBeSyWoq_QdC0mbT2wVs_uo4RFwn.jpg

http://images.orkut.com/orkut/photos/OgAAALqlYi5jVCz3qYlDxTtMkDEzmWHouv6WRgiLOVaTmrdqnb u3uAgwuSUGEIA0dyNFD6ceDDGx-xRRtolg4yR5scIAm1T1UBd1O5_NOnaQaZ0-XwkuvwQEQIbM.jpg

http://images.orkut.com/orkut/photos/OgAAAEKhn9vsHTB0Bm-4aow0iq0ufhS8cG0X0t9cTQqim2pTp6cB5ILnL4K2qd3bTLuVJ ZT8u6d3uWrPfiP3fzZvPGYAm1T1UNgTf_7KGR6-WvZNdB0fVrIX0UBB.jpg

http://images.orkut.com/orkut/photos/OgAAANUPSYi0wk3PNdm90DMy5BWfEuvec7Wd45XT1EeFH9gb0w JcTeD434IEnJZWxIkL-jorpBD9AVcNEDKtZ7KKkugAm1T1UA417kg6OQchU92Eithv3SN vh06V.jpg

http://images.orkut.com/orkut/photos/OgAAALqjbOhqvo_io_GL1BWRxdCWp7a5CdT3Bhr_yZe2ZSOTqE kt8dTJPJEuuubfHJXojF9gHmgctjtFzUQ7LDVhLUcAm1T1UIm6 87m5mxFVagDBhBSf2AMwSVGL.jpg

And the unboxing:

Unboxing MSI GTX570 Twin Frozr II (http://www.case-techbr.net/showthread.php/358-Unboxing-MSI-GTX570-Twin-Frozr-II)

More a novelty today ... my friend bought the mobo to me.

This picture is him with the mobo in your hands:

http://images.orkut.com/orkut/photos/OgAAANWgehDhOwoE8x0PsQZiYkzE9Yp8VM-VDLRpHdQUIj097CeOIbCoVk2XzBaWEwAWm2jHlT6Z4FCvokF8W j3sKigAm1T1UFbOxjexmpr5eqIW1pjbFdAVHtTZ.jpg

ASRock Fatality rocks! http://www.modaafoca.com/forum/images/smilies/HREN21.gif

[zalbard]

Damn, I really like the idea! Quite interesting, indeed! :yepp:
This is one huge chassis, though! :eek:
Make sure to coat it soon! :D

[Marcos Viegas]

Damn, I really like the idea! Quite interesting, indeed! :yepp:
This is one huge chassis, though! :eek:
Make sure to coat it soon! :D

Thank you very much! :up:

My next step is to finish the front, to send the case for electrostatic painting.

[Marcos Viegas]

Well folks, today I have some news.

I bought 8 ADDA fans (each went under U$ 3.00 :rocker: ), the following specifications:

ADDA
AD1212MF-A71GL
120x120x25mm
Connector: 2 pin (plug 3 connectors)
System: FDB Bearing
Speed​​: 2550 RPM
Noise Level: 38 dB (A)
Flow 87,870

And the pictures:

http://images.orkut.com/orkut/photos/PQAAALSQQOwYKcJrqtOJsTYBPkbFIjq8Qx6Cgyga2rHLmZi7Lw F7mwfuRdqoCiOx3L4XsTiiTtYD87BYbz3cnmxvHB8Am1T1UHFl I-bztMIS2QvUDJ9Au7mEHbO1.jpg

http://images.orkut.com/orkut/photos/PQAAAAzPSsDAZvyH8ThfpHNT57PdKUbKzUHsc2gy8-lm2ZKGLGXIFt7hUb2FQy1zc1-t8F4bbqYq03y2rHtZB7a5kLkAm1T1UO3CRrVlx1HD2Cg5vQESt a5vNvTd.jpg

http://images.orkut.com/orkut/photos/PQAAAIofJocqYL9GnqEiYaSM0DCUlNrWeU5y-8S7nmJGRGfPUdkVrr-Tj8HRe4h0Zskk0_xHimOfG9bEB24xxZITamMAm1T1UHJiCcWzu YqmPPx0_JiYkyb6vEn6.jpg

The only bad thing about these fans is that drilling has only to pass the screws on one side ... but who says this is problem for me... :banana:

I also bought a SATA 3 HD 1 TB Seagate:

http://images.orkut.com/orkut/photos/PQAAAGp-nYxrp9vxoXl91tAhJeHN8nga6B-dlpHDr10J1PgjyLgdybqeeRbx3PMftHW9P8-oV4pnf3aBwOpyAATo5q4Am1T1UEHQA6PWvMQEyWjDx16oq_xLx NeC.jpg

http://images.orkut.com/orkut/photos/PQAAADkNxbNTRhxdbbF5IzVvRw8OeWNK2A8Io8rPSHeMrvuU22 yMbtL0WFrzvfEPvJArf255rZaeQDdUMa5SJo9Sv9MAm1T1UMFa YKpkhD7mSPE4jV00Y4eZRQ4W.jpg

Hope you all liked it :up:

[hallaor]

Did not like the ADDA, 38dBa .. to 87 cfm ... a little loud .. 3 dollars more for each one .. : yes:
And that hd, bought where? how much?

[Marcos Viegas]

Did not like the ADDA, 38dBa .. to 87 cfm ... a little loud .. 3 dollars more for each one .. : yes:
And that hd, bought where? how much?

Unfortunately here in Brazil we do not find fans that have a reasonable and CFM are silent. :down:

We have to import ... then these fans and they are cheap has a great CFM. :up:

As for the noise, I have a controller that handles this easily. :cool:

The HD I bought here in Rio de Janeiro even at regular price, which is on average the equivalent of about U$ 80.

[recent]

Love it! the idea.. the work.. fantastic !

[Marcos Viegas]

Love it! the idea.. the work.. fantastic !

Thanks man, i do my best in this project :up::bounces:

[audioave10]

This is a huge and difficult build...so when you are done, I think you will be very happy. Nice work.

[Marcos Viegas]

This is a huge and difficult build...so when you are done, I think you will be very happy. Nice work.

Thank you! :up:

Now that the project is near the end, I'm getting happy with it, but I'm thinking of doing a "new version" without so many plates, using more metal bending. :D

[Marcos Viegas]

News!

Case disassembled for painting, frame mounted and removed the plates:

http://img24.imageshack.us/img24/8589/snc00133ad.jpg

http://img193.imageshack.us/img193/903/snc00134a.jpg

http://img52.imageshack.us/img52/3705/snc00135a.jpg

http://img10.imageshack.us/img10/1256/snc00137a.jpg

Next step is painting and meanwhile the new hardware will come. :up:

[hallaor]

good work, waiting for more updates...

[Marcos Viegas]

good work, waiting for more updates...

Thanks :up:

News!

Case disassembled for painting, frame mounted and removed the plates:

http://img24.imageshack.us/img24/8589/snc00133ad.jpg

http://img193.imageshack.us/img193/903/snc00134a.jpg

http://img52.imageshack.us/img52/3705/snc00135a.jpg

http://img10.imageshack.us/img10/1256/snc00137a.jpg

Next step is painting and meanwhile the new hardware will come. :thumb:

[Marcos Viegas]

Here are the photos of the newest addition:

http://img215.imageshack.us/img215/6097/snc00138a.jpg

http://img535.imageshack.us/img535/2448/snc00139a.jpg

http://img600.imageshack.us/img600/6558/snc00140a.jpg

http://img715.imageshack.us/img715/6395/snc00141a.jpg

http://img94.imageshack.us/img94/4998/snc00142a.jpg

And to celebrate... (still hot because i just got home... but today during the Brazil soccer game i will "taste it" http://www.criminalcafe.com/images/smilies/80-1.gif http://www.criminalcafe.com/images/smilies/102.gif )

http://img135.imageshack.us/img135/6746/snc00143a.jpg

Enjoy :up:

[Marcos Viegas]

After a long time without touching the case, I made the hole in the front plate and put the button to see how it would look visually.

Here are some pictures:

http://img718.imageshack.us/img718/3019/snc00151a.jpg

http://img190.imageshack.us/img190/9805/snc00152am.jpg

http://img64.imageshack.us/img64/6658/snc00153a.jpg

http://img683.imageshack.us/img683/5558/snc00154a.jpg

As the case is all the plates apart to go to the painting, I used to make an assembly to get a sense of how it will look:

http://img695.imageshack.us/img695/9409/snc00155a.jpg

http://img535.imageshack.us/img535/812/snc001562a.jpg

Hope you enjoyed.

[Marcos Viegas]

Who said the Mega Box is forgotten? :nono:

Already a few days I have trimmed edges one remaining cakes on the plates:

http://img94.imageshack.us/img94/281/img0197asm.jpg

Tags:

http://img9.imageshack.us/img9/7359/img0198am.jpg

Plates already done:

http://img855.imageshack.us/img855/7862/img0199a.jpg

Plates to do:

http://img716.imageshack.us/img716/3031/img0200an.jpg

It is slow work because I'm really out of time... but I hope to finish soon and finally arrange for the painting and then build another structure... I hope to see this be the last... :D

I hope you all enjoy :up:

[SOUSA]

Nice work with the alluminium. I would like to be able to do something like that.

I will follow your job. I really like the idea and the design. This gonna be a great case!