PSA: New Products

[Waterlogged]

I've been meaning to make this topic for a while now and with the sheer amount of new goodies available at e-tailers today, it seemed like a good time to lump them all together into one topic. This topic will be continually updated as new items come out that you may find "must have". ;)

First on the list is DD's D5 bay res, limited colors are available and they are red w/black trim, black w/red trim and blue w/silver trim. These are bound to fly out the shipping docks, so get them while they're in stock. ;)

Red w/Black trim
FrozenCPU (http://www.frozencpu.com/products/12499/ex-res-256/Danger_Den_Monsoon_Premium_D5_MCP655_Dual_Bay_Rese rvoir_-_Red_w_Black_Trim_RES-300.html)
Performance-PCs (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30105)


Black w/Red trim
FrozenCPU (http://www.frozencpu.com/products/12498/ex-res-255/Danger_Den_Monsoon_Premium_D5_MCP655_Dual_Bay_Rese rvoir_-_Black_w_Red_Trim_RES-304.html)
Performance-PCs (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30107)

Blue w/Silver trim
Performance-PCs (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30106)

We also have some new clamps from Lamptron. While I still think they improperly borrowed their clamp design from evil98, I also think you guys/gals might be interested in them. There is a full range of sizes and colors to suit most everyone.

Lamptron reusable clamps (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=Qadt6Vr6&searchspec=Lamptron+Elite+Aluminum+Reusable+Liquid +Tubing+Clamps&go.x=17&go.y=10)

Next on the goodies list is a RAM Block from EK for Corsair Dominator memory. It's available in cast acrylic/nickel and acetal/nickel.

Acetal/Nickel Plated (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30104)

Cast Acrylic/Nickel Plated (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30103)

They're sure to go quick so get them while you can. ;)

Next on the list is a selection of goodies from our friends at XSPC. They have released a limited (at this time anyways) selection of compression fittings and a new rad mount.

XSPC Compression fittngs (http://www.frozencpu.com/search.html?mv_profile=advanced_search_profile&mv_session_id=Qadt6Vr6&page=1&all_words=&exact_phrase=&any_words=&none_words=&search_type=single&searchspec=XSPC+G1%2F4%22&brand=*&groups=*&category=*&subcat=*&date_search_type=tf&tf_search=*&start_date=01&start_date=%2F&start_date=27&start_date=%2F&start_date=2011&ui_filter%3Astart_date=date_change&end_date=02&end_date=%2F&end_date=03&end_date=%2F&end_date=2011&ui_filter%3Aend_date=date_change&price_low=0&price_high=9999999999&search_ml=30&find2.x=75&find2.y=10)

XSPC rad mount (http://www.frozencpu.com/products/12506/ex-rad-208/XSPC_RSRX_120mm_Series_Radiator_Stand_-_Powder_Coated_Black.html#blank)

Again, this has been a PSA to let you guys/gals know this crap is now available to you...the buying public. :D

[Kenjiwing]

Would be nice to see some side by side pics of the EK and Mips blocks... I will say the price difference is a huge factor though.

[jmn2519]

Those new clamps look nice. I was thinking about going with compression fittings for my next build but they have me reconsidering.

[shazza]

Again, this has been a PSA to let you guys/gals know this crap is now available to you...the buying public.

Made me chuckle. I was a bit worried that you had gone all sweetness and light, but you set me straight.

This could be a useful thread ... I know I don't have the time right now to do my usual daily search of new products at our favorite etailers.

[BlueAqua]

The XSPC radiator stand looks like a very simple solution that I think many could find handy.

You can get the Danger Den Monsoon reservoirs straight from them too, in all colors available, don't forget that.

http://www.dangerden.com/store/pump-bay-reservoirs/

Also the new Koolance bay pump/reservoirs are available straight from Koolance.

http://www.koolance.com/water-cooling/product_info.php?product_id=2032

I really am liking the new bay pump/reservoirs lately and think its a great step in the right direction for ease of use.

[Church]

Clamps look nice .. but if barbs+these clamps cost even more then compression fittings, imho it robs 90% of raison d'etre from barbs.

[PrometheusCon]

Would be nice to see some side by side pics of the EK and Mips blocks... I will say the price difference is a huge factor though.

EK's block looks really nice. He's probably saving costs because his block screws into the tops of the Dominators rather than having to provide side plates to stick onto the ram modules.

[Fatfool]

OH! Didn't know XSPC Make comps. But arg, no 1/4" ID 3/8" OD love here :(

[SlowSVT]

Watterlogged

Nice timing, I was about to get some SS clamps but those Lamptron aluminum ones are the bomb!

The EK Corsair Dominator cooling block looked tempting but I already have the Corsair extended fin heat sinks staring down the barrel of a 180 cfm fan and I don't want to add another comp to my loop.

Hat's off to you sir! :clap: $47.88 more money added to my rig :shakes:

[Crankyhobo]

I really like the clamps except that the black on still has silver screws. Just spray paint it i guess...

[Utnorris]

Has anyone seen this:

http://www.koolance.com/water-cooling/product_info.php?product_id=2038

I don't believe Martin tested this one.

[Church]

Looks very similar to Delta PFB1212UHE (http://www.sidewindercomputers.com/de12pfexhisp.html)

[Waterlogged]

Watterlogged

Nice timing, I was about to get some SS clamps but those Lamptron aluminum ones are the bomb!

The EK Corsair Dominator cooling block looked tempting but I already have the Corsair extended fin heat sinks staring down the barrel of a 180 cfm fan and I don't want to add another comp to my loop.

Hat's off to you sir! :clap: $47.88 more money added to my rig :shakes:
:D

Like Captain Harlock 's sig reads

At Xtremesystems.org we don't help you save money on your cooling gear, instead we try to make you feel better about the insane ammount you've spent. :D

[Johnny87au]

Dammit always last to see threads here, dam AU times... Those compressions look exactly the same as the bp compressions, was hoping for a XSPC logo ..

[Waterlogged]

Dammit always last to see threads here, dam AU times... Those compressions look exactly the same as the bp compressions, was hoping for a XSPC logo ..

Actually, the owner of XSPC co-owns Thermochill so if anything, these are Thermochill "copies".

[Johnny87au]

they do look similar tho..

[Crazy V]

EK's block looks really nice. He's probably saving costs because his block screws into the tops of the Dominators rather than having to provide side plates to stick onto the ram modules.

This is the same way the MIPS block work on the version designed for Corsair Dominator ram. MIPS does not provide side plates for there Corsair ram blocks either.

[nirvana_1911]

Great idea for a thread Waterlogged, I was keeping me eye on the XSPC rad stands for a little bit now. :)

[Waterlogged]

Thanks :up:

I should also probably add that none of these products are personally endorsed by me by being in this topic...so you will likely see products from time to time from companies that many of you know damn well I'd never endorse. This is a purely "it's available at E-tailers thread".

[nirvana_1911]

Thanks :up:

I should also probably add that none of these products are personally endorsed by me by being in this topic...so you will likely see products from time to time from companies that many of you know damn well I'd never endorse. This is a purely "it's available at E-tailers thread".

LO!LO!LO!L :P :P
name name's? :)

[Waterlogged]

:wasntme::nono:

[nirvana_1911]

:wasntme::nono:

Hey Waterlogged, any chance I can be on your VIP private message list please? :)

[LogAn'sRun]

what are those Comp fittings made out of? Didn't say anything in the specs except for 'chrome finish'. Chrome over what???

[lowfat]

Looks very similar to Delta PFB1212UHE (http://www.sidewindercomputers.com/de12pfexhisp.html)

It looks exactly the same from my eyes. If it is just a debadge then that is one hell of a price considering it is sold for less than half of what the Delta sells for. Although I really doubt you'll see much benefit over ~100CFM fans on most radiators.

[CedricFP]

It looks exactly the same from my eyes. If it is just a debadge then that is one hell of a price considering it is sold for less than half of what the Delta sells for. Although I really doubt you'll see much benefit over ~100CFM fans on most radiators.

Yes the price was really the only thing casting doubt that they are the same fan. Get those monsters on a controller and I bet you've got some great flexibility for managing load temps.

[NaeKuh]

Thanks :up:

I should also probably add that none of these products are personally endorsed by me by being in this topic...so you will likely see products from time to time from companies that many of you know damn well I'd never endorse. This is a purely "it's available at E-tailers thread".

wow u wont endorse one of those DD bay res?

:O

Let me say, until i see the koolance's res, the DD bay res has no equal.
So that DD res's has a naekuh's two ziptie tied approval all over it.

[SlowSVT]

:D

Like Captain Harlock 's sig reads

As I look at my build I'm beginning to think the CPU, GPU, RAM and MB are only there to justify the rest of it!

Then again every time I look at this box I :D Can't wait to fire the "sucka-up" and see how long it takes me to fry the CPU. Not my original intention mind you

..........I shoulda gone to Best Buy :brick:

[Waterlogged]

wow u wont endorse one of those DD bay res?

:O

Let me say, until i see the koolance's res, the DD bay res has no equal.
So that DD res's has a naekuh's two ziptie tied approval all over it.

This thread isn't about using my name to push/sell product. If I endorsed any of these products, I'd be no better than the shills that run rampant and unchecked here and you of all ppl know how I feel about shills.;) When Fester finally gets off their dead arses and sends FCPU some Admiral rads for sale, I'll post it here when they go up. If BP has some new piece of crap, it too, will go up.



As I look at my build I'm beginning to think the CPU, GPU, RAM and MB are only there to justify the rest of it!

Then again every time I look at this box I :D Can't wait to fire the "sucka-up" and see how long it takes me to fry the CPU. Not my original intention mind you

..........I shoulda gone to Best Buy :brick:

You'd still water cool it. :p:

[Col. Panic]

I just got new koolance double D5 bay res in. It is shweet, sexy and built like a tank.

[JoeBar]

Those clamps look sexy and priced accordingly... :D

[voigts]

Those clamps look slick. I would spring for some but $4 a piece is kind of hard to swallow. I'd be looking at 12 clamps for the case I'm working on, and its hard to justify $50 in just clamps no matter how good they look.

[Aquatuning]

Nothing from Phobya WL?

:rofl::D

[millertime359]

Nothing from Phobya WL?

:rofl::D

Just had to do it didn't you?

:frag:

[Waterlogged]

OK, Tonights offerings have been gathered and sorted and they are...

Silverstone TJ11 (http://www.frozencpu.com/products/12525/cst-1077/Silverstone_Temjin_TJ11_Tower_Case_w_Window_Black_ SST-TJ11B-W.html)- I know there is a bit of animosity towards this case but some do find it appealing and it's now available so...

We also get to revisit the XSPC fittings and rad brackets though tonight, they are available at P-PC's and with a few extra selections included. ;)

XSPC fittings (http://www.performance-pcs.com/catalog/index.php?manufacturers_id=149&manufacturers_id=149&sort=20a&main_page=index&filter_id=951)

XSPC rad Brackets (http://www.performance-pcs.com/catalog/index.php?manufacturers_id=149&manufacturers_id=149&sort=20a&main_page=index&filter_id=335)



Nothing from Phobya WL?

:rofl::D

:rolleyes:

Actually, yes. When P-PC's or FCPU gets something new in stock.

[Johnny87au]

Dang that case is almost 600$, hopefully we some modded tj11's soon! WL those xspc compressions, dont they make 45's and 90 degree fittings ?

[Waterlogged]

Dang that case is almost 600$, hopefully we some modded tj11's soon! WL those xspc compressions, dont they make 45's and 90 degree fittings ?

None have popped up yet if they do. :shrug:

[Johnny87au]

None have popped up yet if they do. :shrug:

hmm thats odd, guessing they havent made the change to the site yet? :shrug:

[Utnorris]

Well, not really a new product, but for all the GTX460 users out there that want to WC their cards, Performance-pcs.com has the XSPC block for $60:

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_240_587&products_id=29167

When I first got it, I thought it would be restrictive as he** since it is a 1/4" copper piece with a stainless steal cover, so very thin compared to other blocks. Too my surprise it isn't restrictive at all and it's easy to install. Anyway, just a heads up since it's as cheap as a GPU only block, but cools the entire card.

[Computurd]

well newegg has twenty percent off of fans today btw. use this code.
EMCYTZT281

and yes, they are out of gentle typhoons!

[Utnorris]

I have the Triberks, 9 of them, they are great, no need for more fans now.

[LogAn'sRun]

We also get to revisit the XSPC fittings and rad brackets though tonight, they are available at P-PC's and with a few extra selections included. ;)

XSPC fittings (http://www.performance-pcs.com/catalog/index.php?manufacturers_id=149&manufacturers_id=149&sort=20a&main_page=index&filter_id=951)

XSPC rad Brackets (http://www.performance-pcs.com/catalog/index.php?manufacturers_id=149&manufacturers_id=149&sort=20a&main_page=index&filter_id=335)


Hey! Let's revisit my unanswered question then too!!!!!!


what are those Comp fittings made out of? Didn't say anything in the specs except for 'chrome finish'. Chrome over what???

[Waterlogged]

Hey! Let's revisit my unanswered question then too!!!!!!

Sorry Logan, didn't mean to blow you off. I honestly don't know but, I would suspect/hope they are made from brass. XSPC doesn't even mention anything about materials on their site either.

http://xspc.biz/fittings.php

BentleyA might be a better person to ask since he's closer with those guys. :shrug:

[penguins]

Brass, Like every other fitting for watercooling.

[Waterlogged]

Tonight's addition to the "New to E-tailers" list is the Koolance RP-402X2 for the DDC (Link (http://www.frozencpu.com/products/12538/ex-res-257/Koolance_RP-402X2_Dual_525_Reservoir_Serial_or_Parallel_for_1_ or_2_Pumps_RP-400_Laing_DDC_MCP350_MCP355.html?id=5W5RIstn)), get 'em while they're hot (and in stock;)).

[Johnny87au]

thanks WL, cant wait to see a liquid build using of these, Still deciding wether to use a bay reservoir or the sexy standalone Pyoba res = /

[Waterlogged]

Time for another update...Again, none of these product announcements imply any kind of endorsement from myself.

First off, we'll start with the Koolance goodies. This time they are now available @ P-PC's

Koolance RP-402X2 (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30131&zenid=d9f061361e3c68e78fcd932f24251756)

They also have replacement covers for those that want silver faceplate's.

Koolance Faceplate for RP-402X2, Silver (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30132&zenid=d9f061361e3c68e78fcd932f24251756)

Koolance Faceplate for RP-452X2, Silver (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30133&zenid=d9f061361e3c68e78fcd932f24251756)

Next on the list are some goodies from EK that I'm sure a few have been waiting for. Please take note that these are NON REF versions.

EK-FC6970V2 for AMD/ATI Radeon HD Non-Reference 6970 Series - Nickel (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30134&zenid=d9f061361e3c68e78fcd932f24251756)

EK-FC6970V2 for AMD/ATI Radeon HD Non-Reference 6970 Series - Nickel/Acetal (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30135&zenid=d9f061361e3c68e78fcd932f24251756)

EK-FC6970V2 Backplate for ATI Non-Reference 6970 - Nickel (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30136&zenid=d9f061361e3c68e78fcd932f24251756)

EK-FC6970V2 Backplate for ATI Non-Reference 6970 - Black (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30137&zenid=d9f061361e3c68e78fcd932f24251756)

We also have new crap from Watercool, 3 more rads from the MO-RA series. (silently rolling eyes).

Watercool MO-RA3 360 Core LC (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30139&zenid=d9f061361e3c68e78fcd932f24251756)

Watercool MO-RA3 420 Core LC (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30140&zenid=d9f061361e3c68e78fcd932f24251756)

Watercool MO-RA3 9x140mm Pro - Black (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30141&zenid=d9f061361e3c68e78fcd932f24251756)

...next up, we have a interesting mix of items from Alphacool.

This here is another version of the D5 Vario, this time with G1/2 outer threads.
Alphacool VPP655 -OT12 (G1/2" outer threads) (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30153&zenid=d9f061361e3c68e78fcd932f24251756)

to use this pump, you'll likely need to use either of these

Alphacool Screw Connector Adapter Internal Thread G1/2" on G1/4 Internal Thread - Silver (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30150&zenid=d9f061361e3c68e78fcd932f24251756)

Alphacool Screw Connector Adapter Internal Thread G1/2" on G1/4 Internal Thread - Black (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30149&zenid=d9f061361e3c68e78fcd932f24251756)

They have also made the bare pump (sans top) available for those that plan on using one of the new bay restop's from Koolance or DD and don't want extra parts laying around. It too is of the Vario version.

Alphacool VPP655 Single Edition (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30154&zenid=d9f061361e3c68e78fcd932f24251756)

Continuing the pump theme, they also have a new D5 top and stand.

Alphacool HF D5 TOP - Black Acetal G1/4 (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30143&zenid=d9f061361e3c68e78fcd932f24251756)

Alphacool Pump Stand for D5 / Alphacool 655/644 (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30148&zenid=d9f061361e3c68e78fcd932f24251756)

For those of you that have 60mm tube res's with broken or misplaced mounts, they have the tried and well tested (yet ugly to many) res clips.

Alphacool Mountings for External Reservoir 60mm (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30142&zenid=d9f061361e3c68e78fcd932f24251756)

Next are a couple of simple bay res's.

Alphacool Repack Single Bayres 5,25" Version 2 (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30146&zenid=d9f061361e3c68e78fcd932f24251756)

Alphacool Repack Dual Bayres 5,25" Version 2 (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30147&zenid=d9f061361e3c68e78fcd932f24251756)

Here we have a universal NB/SB/VGA block

Alphacool HF 14 Smart Motion Universal Copper Edition (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30151&zenid=d9f061361e3c68e78fcd932f24251756)

If you've purchased an Alphacool CPU block and don't like the springs and nuts showing, you can now replace them with this kit.

Alphacool Schraubensatz Cool Cover - Copper (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30152&zenid=d9f061361e3c68e78fcd932f24251756)

Now we head to the curiosity corner where we'll find these neat little RAM coolers

Alphacool MCX one Copper Edition (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30145&zenid=d9f061361e3c68e78fcd932f24251756)

Alphacool MCX Ram Copper Edition (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30144&zenid=d9f061361e3c68e78fcd932f24251756)

I should note that the manifolds haven't appeared yet which makes using these a little bit more difficult as the tubing used is rather small.

To wrap up the Alphacool stuff, we have one of the few products I'm actually going to warn you about. Do NOT buy these, they are made from Aluminum and the performance isn't anywhere near as good as the so called "reviewers" make them out to be.

Cape Cora HE series passive heat exchangers (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=cape+cora+HF)

Finally on the list today we have a sighting of Lamptron Clamps @ P-PC's

Lamptron Clamps (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=lamptron+elite+clamp)

That wraps up another update of what is fresh on E-tailers shelves.

[Computurd]

you keep waving them lamptron clamps around damn they are sexy...

[CedricFP]

Great update, Waterlogged.

[phantomferrari]

you keep waving them lamptron clamps around damn they are sexy...

i too have been tempted by those lamptron clamps but the xspc compression fittings are sadly more of what i want :D

[Computurd]

Must......Resist.....Temptation......



Damnit!
http://i517.photobucket.com/albums/u332/paullie1/2011-02-1101-35-55323.jpg

[Johnny87au]

dam there sexy, do they come in black ??

[shazza]

You bit on the clamps !!!! Please do post a pic when they are installed.

[Waterlogged]

dam there sexy, do they come in black ??

http://img150.imageshack.us/img150/2517/iconlinkpu4.gif (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=lamptron+elite+clamp+black)

Go ahead...you know you want to :hrhr: :fact:

[voigts]

You guys are making me want a set of those clamps for Quintessence. The reason I went from clamps to zip ties was mainly for looks, but these clamps looks sweet.

...resist, ...resist, ...resist

:fact: $4 ea

[Johnny87au]

http://img150.imageshack.us/img150/2517/iconlinkpu4.gif (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=lamptron+elite+clamp+black)

Go ahead...you know you want to :hrhr: :fact:

Jizz in my pants :shakes:

[stangracin3]

omfg i want, those clamps look bad ass

[Johnny87au]

I'll purchase them soon just wanting to see some used in a quality build :D

[stangracin3]

they remind me so much of evil98's
did he sell the design?

[JoeBar]

On second thought i'm a bit skeptical on these clamps cause firstly i would like them a bit wider (personal preference) and secondly i don't know about the quality of the finish and its resistance to scratches...

[voigts]

My question is what size clamps you would use on 7/16"ID 5/8"OD on Bitspower barbs. I'm measuring about 11/16"OD for that tubing on those barbs.

[Computurd]

As a Public Service Announcement of my own, i would advise you guys against buying these....they seem to be reproducing when im not looking!
http://i517.photobucket.com/albums/u332/paullie1/2011-02-1420-39-00583.jpg

[Waterlogged]

My question is what size clamps you would use on 7/16"ID 5/8"OD on Bitspower barbs. I'm measuring about 11/16"OD for that tubing on those barbs.

That's a very good question voigts. Maybe Computurd can measure his to see if there is any play in them? :shrug:


As a Public Service Announcement of my own, i would advise you guys against buying these....they seem to be reproducing when im not looking!
http://i517.photobucket.com/albums/u332/paullie1/2011-02-1420-39-00583.jpg

:rofl:

Look out rabbits, looks like these clamps are better at reproducing than you are. :eek:

[Computurd]

3/4 in OD

http://i517.photobucket.com/albums/u332/paullie1/2011-02-1423-03-15490.jpg

[Waterlogged]

Any idea what they'll close to?

[Computurd]

not much play tbh. when i have it loose over a bitspower barb there isnt a whole lotta room. it will go over it easily though, but i am using 1/2 id 3/4 od. dunno but it is close, but works! not sure how wide it will go, im just leaving them open, not trying to pry :)

i tried with it loose again and it looks like .890 is about right. just a few more ticks clockwise on the dial two posts up, that wasnt the best measurement :(

http://i517.photobucket.com/albums/u332/paullie1/2011-02-1423-25-37685.jpg

[Waterlogged]

OK, so it looks like 5/8 "might" fit 11/16" but, it looks like using the right size barbs for the tubing would be the safest option when using these clamps.

voigts, you might just want to get 1 for testing purposes if you decide you want to try them, and get the rest later if it checks out.

[voigts]

Given the price, I would definitely get one first and check the fit before I go ordering them.

[Kibbler]

FYI the 3/8" OD clamps do not work. They are too loose. At their tightest they still have a diameter of about 11mm. I can slide a fully tightened clamp off of the barb + hose. Don't buy them.

I've sent Spawne32 a PM, I hope he sees it.

1/2" OD clamps work beautifully though.

[Waterlogged]

FYI the 3/8" OD clamps do not work. They are too loose. At their tightest they still have a diameter of about 11mm. I can slide a fully tightened clamp off of the barb + hose. Don't buy them.

I've sent Spawne32 a PM, I hope he sees it.

1/2" OD clamps work beautifully though.

Well...that sucks!

Just for the record , your talking about these (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30162)), right? Also, what barbs and tubing are you using with them? Maybe we can figure something out JIC Spawne32 takes a while getting back to you.

[NaeKuh]

WOW, and i really liked the looks of those clamps..

I guess im sticking with my koolance steel ones.

[Kibbler]

Well...that sucks!

Just for the record , your talking about these (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30162)), right? Also, what barbs and tubing are you using with them? Maybe we can figure something out JIC Spawne32 takes a while getting back to you.Yes that's the one. For the record I'm using 1/4" ID - 3/8" OD R3400 (I have some 3603 and the measurements are the same) and a Bitspower 1/4" barb.

[Waterlogged]

Yes that's the one. For the record I'm using 1/4" ID - 3/8" OD R3400 (I have some 3603 and the measurements are the same) and a Bitspower 1/4" barb.

Thanks for the follow up Kibbler. Well, that rules out my thoughts...I was going to surmise that maybe Lamptron made these more with BP fittings in mind but this clearly isn't the case. Guess we have to wait for Spawne32 to show up now because I'm out of ideas. :shrug:


WOW, and i really liked the looks of those clamps..

I guess im sticking with my koolance steel ones.

They look nice but, I wouldn't switch from the Koolance spring clamps for anything...well, not anything currently out. ;)

[Kibbler]

Once I'm home later I'll do one more check in case they put 1/2" OD clamps into 3/8" OD packaging by mistake.

[airs]

5/8 Clamp over 7/16 - 5/8 MK + Swiftech 1/2" barb its just barely tight:

http://img375.imageshack.us/img375/8791/dsc00928y.jpg

http://img513.imageshack.us/img513/1583/dsc00929m.jpg

Over EK 1/2" barb it is very tight (don't have a pic tho)

[Computurd]

yea over these bitspower barbs they can be very tight. i mean you have to wiggle these on there.

[Alexandr0s]

Thanks for the follow up Kibbler. Well, that rules out my thoughts...I was going to surmise that maybe Lamptron made these more with BP fittings in mind but this clearly isn't the case. Guess we have to wait for Spawne32 to show up now because I'm out of ideas. :shrug:



They look nice but, I wouldn't switch from the Koolance spring clamps for anything...well, not anything currently out. ;)

Same for me. Those Koolance clamps work great for me :D.

[Waterlogged]

Update time. :rolleyes:

FrozenCPU has just gotten some MO-RA rads and accessories in stock.

MO-RA3 9 x 140mm PRO (Link (http://www.frozencpu.com/products/12551/ex-rad-210/Watercool_MO-RA3_9_x_140mm_PRO_Extreme_Radiator_-_Black_Powder_Coat_22120.html))

MO-RA3 9 x 140mm LT (Link (http://www.frozencpu.com/products/12552/ex-rad-211/Watercool_MO-RA3_9_x_140mm_LT_Extreme_Radiator_-_Black_Powder_Coat_22120.html))

MO-RA3 420 Core LC (Link (http://www.frozencpu.com/products/12550/ex-rad-209/Watercool_MO-RA3_420_Core_LC_Extreme_Radiator_-_Black_Powder_Coated_22095.html))

MO-RA3 360 Case Mounting Bracket (Link (http://www.frozencpu.com/products/12554/ex-rad-213/Watercool_MO-RA3_360_Wand_Case_Mounting_Bracket_22070.html))

MO-RA3 420 Case Mounting Bracket (Link (http://www.frozencpu.com/products/12553/ex-rad-212/Watercool_MO-RA3_420_Wand_Case_Mounting_Bracket_22170.html))

[CedricFP]

Anyone know how the MO-RA rad series performs?

[Church]

Skinnee plans to test these monsterrads too, but it might take some time, as they have lot of tests in queue.
Meanwhile there were tests by Bundymania. MoRa3 9x140 > MoRa3 9x120 > MoRa2 9x120 > Phobya 1080 9x120 IIRC. Rather powerful rads.

[sunnyville]

I had a mora2 - it had the most amazing cooling power ever. I only used 9 fans though not 18 (that would be push-pull). The only downside with the Mor-RA 2 was the fact it was a bit restrictive - 2 D5's only managed around 150 L/hour.

[JoeBar]

Same for me. Those Koolance clamps work great for me :D.
One more to the party... Koolance spring ones rock... :up:

[Waterlogged]

Tonight, we have a fairly large update from Perf-PC's

Swiftech Komodo HD6900 is finally up for sale. (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30177&zenid=c34f105c51b8f9fd51f45349760b82b4))

eVGA Hydro for the GTX580 is also available. (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30178&zenid=c34f105c51b8f9fd51f45349760b82b4))

Koolance has a new 20 FPI rad (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30176&zenid=c34f105c51b8f9fd51f45349760b82b4))

Bitspower has some "Diversion Fittings" that look like they might be of interest to some. Looks like these are for their res's (possibly the inlet:shrug:), to avoid excessive turbulence/kill vortex.

Bitspower G1/4" Matte Black In-Side 90 Degree Diversion Fitting (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30183&zenid=c34f105c51b8f9fd51f45349760b82b4))

Bitspower G1/4" Black Sparkle In-Side 90 Degree Diversion Fitting (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30182&zenid=c34f105c51b8f9fd51f45349760b82b4))

Bitspower G1/4" Silver Shining In-Side 90 Degree Diversion Fitting (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30181&zenid=c34f105c51b8f9fd51f45349760b82b4))

They also have a MoBo block set for Sapphire X58. (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30184&zenid=c34f105c51b8f9fd51f45349760b82b4))

XSPC has a couple new items available and they are;

XSPC X2O DC-200 "Bay-Res" Pump/Reservoir Combo "Short Version" (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30186&zenid=c34f105c51b8f9fd51f45349760b82b4))

and

XSPC Rasa 750 RS240 WaterCooling Kit (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30187&zenid=c34f105c51b8f9fd51f45349760b82b4))

Last on the list (man, I hate these large updates :shakes:), we have some stuff from Technofront.

Tecnofront AirBox 140 Plexi (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30188&zenid=c34f105c51b8f9fd51f45349760b82b4))

Tecnofront "Nano - Smallest Reservoir in the World" (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30189&zenid=c34f105c51b8f9fd51f45349760b82b4))

Tecnofront "Challenger X1" 5.25" Bay Reservoir (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30190&zenid=c34f105c51b8f9fd51f45349760b82b4))

Tecnofront "Challenger X2" 5.25" DUAL Bay Reservoir (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30191&zenid=c34f105c51b8f9fd51f45349760b82b4))

[Johnny87au]

Wow thanks WL, 20 fpi rad from koolance? Hopefully I can find a review..

[Johnny87au]

Wow 700w it can dissipate, that's quite good for a double rad, and I'm guessing that's without using 2 fans...


Edit.. Sorry dbl post..

[Waterlogged]

New update...new E-tailer.

Swiftech MCP35X-RES Rev. B Cylindrical Reservoir (Link (http://www.svc.com/mcp35x-res.html))

XSPC Razor GTX 580 Copper Water Block (Link (http://www.svc.com/rzr580.html))

[Johnny87au]

Ah exactly what im looking for, hardly no room to go with my 35x in a htpc!

[SlowSVT]

All this neat hardware I wanna buy make it STOP!:cussing:

All I needed was those stupid Lamptron fitting, then add water and I'm "done!". You think that would be the case but..........Nooooooo. Let me tell you it's not a good idea to have an open nearly completed chassis sitting below and in front of your TV while consuming alcohol (you end-up watching more "computer" then TV :shakes:). Just what I needed was another "Eureka" moment. Needless to say those hot swappable drive bays in the 800D no longer piss me off and I now have a pair of Black Ice extreme 140 rads occupying that space. It's a good thing I'm running out of room inside this box but this thread ain't helping.

Here are pics of the Lamptron hose clamps. I have both 3/8"ID x 1/2" OD and 1/2"ID x 3/4"OD hose. Mine were actually tight going on an had to remove the clamping screws and open the clamp to get them to slide over the barb fittings. If they are not quite tight enough you can file the gap in the clamp wider to get a grip the hose tighter. I always buy clear anodize because you can file it or scratch it and it still looks good.


http://i81.photobucket.com/albums/j215/SlowSVT/ComputerHoseClamps1.jpg
http://i81.photobucket.com/albums/j215/SlowSVT/ComputerHoseClamps2.jpg

[NaeKuh]

lmaolmaolmao...

i remember when i first showed off the koolance clamps.

Remember b4 that i was a ziptie Wh0re.
Its the only thing that got me off zipties.

And i remember showing them on XS for the first time, and having people go OMG whats that?

man... if we look back even 3 yrs, its like we completely flipped watercooling from what it used to be.
Imagine what those of us who been LCing for 10+ yrs think.

[iddqd]

http://img692.imageshack.us/img692/4374/669pxhoseclampsscrewagr.jpg

Back when I used barbs (circa 2002, there were no 1/2" compressions yet), I just got like 20 of these for $5 at a local home depot.

[voigts]

It may not be new, but for the first time I see that Sidewinder is carrying a plasticizer free version of Tygon - "TYGON® 2001 Plasticizer Free Tubing 1/2in. ID x 3/4in." (http://www.sidewindercomputers.com/ty20plfrtu.html). They only have it in that one size. It has almost the same durometer rating at 69 vs Tygon 3400's 64, with a max psi rating of 16 at 73f vs Tygon R3400's rating of 35psi at 73f.

I'm thinking about ordering this same tubing instead in 3/8"ID 1/2"OD from US plastics and matching it up with some 7/16" Bitspower barbs. My only concern is that the PSI rating is 12 at 73c. I think that should be still ok, but it is a bit on the low side. - (Any thoughts here?)

Tygon doesn't make this in 7/16"ID, or thicker walled 3/8"ID 5/8"OD. I'm tired of having plasticizer gunk working its way into the rads, res, and lining everything.

[NaeKuh]

Well if were going PSA, SVC, a store majorly undermissed has sleeved cables for cheaper then a murder mod kit.

http://www.svc.com/mod-8peps-bk.html = $7.99
Black and White:
http://ep.yimg.com/ca/I/svcompucycle_2143_46761691

http://ep.yimg.com/ca/I/svcompucycle_2143_48199940

The ever so finger painful, zombie making main board psu line:
http://www.svc.com/mod-24pext-bk.html = 10.99

Black:
http://ep.yimg.com/ca/I/svcompucycle_2145_73459218

And White:
http://ep.yimg.com/ca/I/svcompucycle_2145_73704396


:)

[JoeBar]

For people who rather shoot themselves than sleeve... :lol:

[NaeKuh]

For people who rather shoot themselves than sleeve... :lol:

lol true..

i spent 11 + 8 + 8 + 10 on the total kit to sleeve my entire computer.

36 dollars, comes all nicely prepackaged, and presleeved.

No tweezers or heat gun required! PLUG AND PLAY~!

[Alexandr0s]

I've been thinking about buying these for a while now. Somehow it feels like a job half done because my PSU still isn't sleeved, but on the other hand, why sleeve it if 90% is going to be behind the motherboard anyway.
I think I should've tried sleeving at least once before realising how much it sucks and switching to these beauties. A weird rite of passage, one might say ;).

[voigts]

Well if were going PSA, SVC, a store majorly undermissed has sleeved cables for cheaper then a murder mod kit.

I already had the page on sidewinder with these pulled up in a tab as I just saw them a couple of days ago.

[NaeKuh]

I've been thinking about buying these for a while now. Somehow it feels like a job half done because my PSU still isn't sleeved, but on the other hand, why sleeve it if 90% is going to be behind the motherboard anyway.
I think I should've tried sleeving at least once before realising how much it sucks and switching to these beauties. A weird rite of passage, one might say ;).

But if the cables are not pretty you cant make fancy loops or pretty designs by spreading them out like a peac0ck. :ROTF:

[ScottALot]

If they made the heatshrink any shorter, they'd put our friend Nils out of business!

[Alexandr0s]

LOL :rofl:. And Scott, NZXT sell pre-sleeved cables like that too, with shorter heatshrink. The only difference is it's a bit more expensive.

[Martinm210]

Well if were going PSA, SVC, a store majorly undermissed has sleeved cables for cheaper then a murder mod kit.
:)

I like SVC, shop there all the time......like those cables too.:up:

[ScottALot]

LOL :rofl:. And Scott, NZXT sell pre-sleeved cables like that too, with shorter heatshrink. The only difference is it's a bit more expensive.

Yeah I actually have a few of them :p:

[skinnee]

I still prefer multi-braid sleeve over single braid, even if the cables are rather cost effective... I think FCPU and PPC's have the Modsmart multi-braid cables.

[ScottALot]

I still prefer multi-braid sleeve over single braid, even if the cables are rather cost effective... I think FCPU and PPC's have the Modsmart multi-braid cables.

I can't find it and can't picture it either, unless you're talking about just sleeving one mass of cables with one big sleeve... I look up multi-braid sleeve and it brings me back to this page :rofl:

[Waterlogged]

I can't find it and can't picture it either, unless you're talking about just sleeving one mass of cables with one big sleeve... I look up multi-braid sleeve and it brings me back to this page :rofl:

http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=PYz8ogKs&searchspec=kobra&go.x=0&go.y=0

http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=kobra

[skinnee]

Mod/Smart Kobra (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=Y4Rkj2XP&searchspec=Mod/Smart+Kobra&go.x=0&go.y=0/?campid=sl)... 7+ pages

edit: WL beat me to it.

[ScottALot]

I must be blind, I can't tell the difference.

[Waterlogged]

It's a 3 x 3 weave instead of the normal 1 x 1 that the other stuff has.

@ skinnee...:D

[skinnee]

Yes, you must be.

3 filaments per weave vs. 1 filament.

Kobra Sleeve (http://www.frozencpu.com/products/image/12062/slv-146.jpg/slv-186/ModSmart_Kobra_High_Density_Cable_Sleeving_1_-_Black.html) - Single Braid (http://www.frozencpu.com/products/image/11207/cab-240.jpg/cab-240/ModRight_CableRight_Single_Braid_MB_8-Pin_to_44_12V_EPS_Extension_-_Black.html)

edit: son of a, sniped again.

[Computurd]

noob QOTD:
ok so these presleeved cables, do they fit any psu? i have a ST-1500, and i am sure some connections to the psu are propietary design?

[ScottALot]

Yes, you must be.

3 filaments per weave vs. 1 filament.

Kobra Sleeve (http://www.frozencpu.com/products/image/12062/slv-146.jpg/slv-186/ModSmart_Kobra_High_Density_Cable_Sleeving_1_-_Black.html) - Single Braid (http://www.frozencpu.com/products/image/11207/cab-240.jpg/cab-240/ModRight_CableRight_Single_Braid_MB_8-Pin_to_44_12V_EPS_Extension_-_Black.html)

edit: son of a, sniped again.

Oh I was looking for something different... like how many cables were sleeved in each sleeve. :(:confused:

[lowfat]

I must be blind, I can't tell the difference.
You definitely are.

noob QOTD:
ok so these presleeved cables, do they fit any psu? i have a ST-1500, and i am sure some connections to the psu are propietary design?

They are extensions. You still use the stock cables with something like these. You just try to hide them the best you can.

[Johnny87au]

noob QOTD:
ok so these presleeved cables, do they fit any psu? i have a ST-1500, and i am sure some connections to the psu are propietary design?

Absoulately fine, Just connect them to your current 24 pin and wolla your done!

[Computurd]

ouch. that sucks. thought i was gonna get outta this the easy way. there is no way to hide cables in a acrylic torture rack :(

[CedricFP]

The modsmart/kobra sleeved cables look great.

[voigts]

Among other things, I ordered modsmart cables from Perf-PCS today. I've got the 24 pin MB, 2 PCI-E, and EPS cables coming, so we'll see how nice they are.

I also went ahead and ordered that Tygon 2001 plasticizer free tubing today from US Plastics. Without plasticizer, it shouldn't get that white chaulky build-up that is such a common issue.

Man this watercooling sure adds up. I just went through about $200 today just on fittings, cables, a grill, a few connectors, and tubing.

[shazza]

Some OT posts removed (including mine) ...

[Waterlogged]

A little late with this update but I've been dealing with some slightly more important issues at home so... but hey, better late than never. :p:

Antec KÜHLER H2O 620 High Performance Liquid Cooling System (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30204)). This falls into the "it's technically liquid cooling" category and these type units are not very well liked by yours truly. :stick:

[Alexandr0s]

For me, it really depends on how well those units function. I liquid cool because I like the looks and it adds a little performance boost over air (depending on how much rad you got). With these blocks looks don't really play a part, so it all comes down to performance. Unfortunately that isn't always that great when you compare it to some high end air coolers with a similar price. So unless this suddenly performs relatively well compared to air coolers, then I might consider it some time :p:.

[Johnny87au]

For me, it really depends on how well those units function. I liquid cool because I like the looks and it adds a little performance boost over air (depending on how much rad you got). With these blocks looks don't really play a part, so it all comes down to performance. Unfortunately that isn't always that great when you compare it to some high end air coolers with a similar price. So unless this suddenly performs relatively well compared to air coolers, then I might consider it some time :p:.

+1, you took the words out of my mouth einstein :up:

[skinnee]

Single rads will have a very difficult time overtaking top end air coolers.

[Alexandr0s]

Which is why I'm impressed with the performance of some of those units, but at this point, air cooling is still better bang for buck than those units.

[Church]

Alexandr0s: in most cases they "win" over top air coolers only by using outside colder air (but that means also dumping more heat inside case, which is not too good for gpu-s?), or by having stock fans with much higher rpm-s. Rarely one can see review of such with actual noise level measurement, instead reviews say such and such temps for minimum/medium/maximum rpm-s (which clearly is different for different stock fans for these and air coolers they are put against) :/
They still have their niche, as in = better cooling then stock and greater mount flexibility in small/cramped cases, where high top tower coolers simply won't fit.
Otherwise with testing at same conditions (both use inside air and at similar noise levels) top air coolers win. +They are cheaper, +somewhat safer (dead fan still leaves more capable passive cooler from common one instead of these smallish LC sys with dead pump).
They certainly shouldn't be suggested as better at cooling then top air coolers as they .. well, aren't :), and can be suggested only for niche described above. For all the rest wishing for LC set more effective then air are XSPC Rasa 750 sets, only slightly more expensive. :D (there are also swiftech and EK sets, but IIRC they cost more).
One cannot fool physics. Smaller rad heat exchange area for these 1x120 LC systems then that of top air coolers cannot dissipate more heat or do that more quietly. You have to ramp up airflow/fans to do that. But then again, air coolers would win from more powerful fans as well.

[Alexandr0s]

Which is what I said right? "Unfortunately [performance] isn't always that great when you compare it to some high end air coolers with a similar price." All I said was that their performance/cost impressed me compared to the performance/cost of a full liquid cooling kit.
And I would never recommend them over a Megahalems or Silver Arrow or something like that :p:.

[Waterlogged]

OK, back on topic.

Performance PCs


EK-UNI RAD Holder 140 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30230))

IandH Dead-Water (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30213))

SVC


XSPC Razor HD6970 full cover (Link (http://www.svc.com/rzr6970.html))

[Church]

OK, on topic it is. :)
Koolance CPU-370 (http://www.highflow.nl/water-blocks/cpu-blocks/cpu-blocks-for-intel-cpu/koolance-cpu-370.html) @ highflow.nl.

[voigts]

I got in the modsmart/kobra cables that I ordered from Performance-Pcs. They are very nice and the sleeving looks great.

[Martinm210]

Looks like SVC has the 6 channel sunbeam rheosmart (http://www.svc.com/pl-rs-6.html) in stock now too.

I picked up the 3 channel version a couple of weeks ago from the egg, but I probably should have splurged for the 6.

[Johnny87au]

Thanks martin, 30w what a beast!!, And WL isnt iandh's product pretty much the same as PT nuke ??

[the finisher]

I think I need the 3 channel Sunbeam controller. The 2 piece PCB design will allow modding the pots separate form the rest of the controller. Just what I need.

Helpful Thread.:up:

[Utnorris]

Joke of the Day!

I was in Microcenter the other day and saw this kit:

http://www.microcenter.com/single_product_results.phtml?product_id=0342860

I bet it's a winner. :D

[Johnny87au]

Joke of the Day!

I was in Microcenter the other day and saw this kit:

http://www.microcenter.com/single_product_results.phtml?product_id=0342860

I bet it's a winner. :D

wow thats epic :down:

[penguins]

Utnorris, I saw that too a couple weeks ago. HAHA it IS epic Johnny

you would think a Place that has EK WB products would think more

[vhaarr]

Joke of the Day!
http://www.microcenter.com/single_product_results.phtml?product_id=0342860
I bet it's a winner. :D

A norwegian hardware site did a review of a similar set, the KU3-241; http://www.hardware.no/artikler/larkooler_ku3-241/89971 (google translation (http://translate.google.com/translate?js=n&prev=_t&hl=no&ie=UTF-8&layout=2&eotf=1&sl=no&tl=en&u=http%3A%2F%2Fwww.hardware.no%2Fartikler%2Flarkoo ler_ku3-241%2F89971&act=url)).

What's interesting is that in the article they state that Larkooler manufactured all the parts themselves, but they bare striking resemblance to products like the Heatkiller CPU block and the EK-DCP 2.2 pump. I can see they're not identical, though.

[Johnny87au]

penguins most epic kit ive ever laid eyes on lol

[Martinm210]

Joke of the Day!

I was in Microcenter the other day and saw this kit:

http://www.microcenter.com/single_product_results.phtml?product_id=0342860

I bet it's a winner. :D

It says "high performance", what more do you want....:D

[Quagmire LXIX]

WL's PSA (Public Spending Announcement ;)) caught my eye with those clamps, the last piece to complete my obscenely overpriced pc. The plastic clamps looked out of place.

I also wanted better filtering and took my air design to positive pressure (the dust collection was fast and ugly under negative) by doing the math and flipping my cpu rad fans. Those are Demciflex filters. The stickie side of the magnet holder is gravitationally challenged on my textured case, I recommend you have the upper screws go through them to hold em up if your case is similar.

Another purchase was the plastic shroud found in another thread. I thank you all for the heads up, my wallet, not so much :D

[JoeBar]

If this is the Laptron flexlight, prepare to through it in garbage in about a month... :p:

[Waterlogged]

Frozen CPU


Phobya 120x120x20mm Fan / Radiator Shroud - Plexi (Link (http://www.frozencpu.com/products/12587/ex-rad-217/Phobya_120x120x20mm_Fan_Radiator_Shroud_-_Plexi.html))

Phobya Shroud & Decoupling Gasket 140mm (Link (http://www.frozencpu.com/products/12589/ex-rad-219/Phobya_Shroud_and_Decoupling_Gasket_140mm_7mm_thic kness.html))

Phobya Shroud & Decoupling Gasket 120mm (Link (http://www.frozencpu.com/products/12588/ex-rad-218/Phobya_Shroud_and_Decoupling_Gasket_120mm_7mm_thic kness.html))

Phobya 3 x 140mm Radiator Stand (Link (http://www.frozencpu.com/products/12604/ex-rad-220/Phobya_3_x_140mm_Radiator_Stand_-_Black_Powder_Coat_-_15mm_Spacing.html))


Performance-PC's


Tecnofront Visual Version 2 Reservoir (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30244))

Koolance CPU-370 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30269))

Koolance Radiator, 3x120mm 20-FPI (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30268))

XSPC RASA Ultimate AMD CPU Waterblock - Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30264))


Xoxide *New Vendor*


Koolance CPU-370 (Link (http://www.xoxide.com/koolance-cpu-370cpucooler.html))

XSPC Rasa CPU Acetal Water Block (Link (http://www.xoxide.com/xspc-rasa-cpu-acetal-water-block.html))

XSPC Rasa GPU Water Block (Link (http://www.xoxide.com/xspc-rasa-gpu-water-block.html))

[Utnorris]

FYI: CrazyPCs is going out of business and they have a few water cooling parts that might interest some.

http://www.crazypc.com/

[Waterlogged]

Frozen CPU


Phobya G1/4 Pressure Safety Valve Fitting - Black Nickel (Link (http://www.frozencpu.com/products/12607/ex-tub-808/Phobya_G14_Pressure_Safety_Valve_Fitting_-_Black_Nickel.html))


Performance-PC's


XSPC Rasa 750 RX360 WaterCooling Kit (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30281))

XSPC Rasa 750 RX240 WaterCooling Kit (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30280))

XSPC Rasa 450 RS120 WaterCooling Kit (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30279))

XSPC X2O DC-750 - Dual 5.25" Bay-Res Pump/Reservoir Combo (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30282))

XSPC RS360 Compact High Performance Radiator - Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30285))

XSPC RS240 Compact High Performance Radiator - Black(Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30284))

XSPC RS120 Compact High Performance Radiator - Black(Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30283))

XSPC G1/4" to (13mm) 1/2" Barb Fitting - Chrome (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30286))

XSPC G1/4" to (10mm) 3/8" Barb Fitting - Chrome (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30287))

Danger Den Monsoon Premium - D5 Dual Bay Reservoir - BLACK with Black Trim (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30288))

Danger Den Monsoon Premium - D5 Dual Bay Reservoir - BLACK with Silver Trim (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30289))

Danger Den Monsoon Premium - D5 Dual Bay Reservoir - BLUE with Black Trim (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30290&zenid=edaf390f85414d84e9ffc4937c065b6b))


Also as part of the PSA today (even though it's not LC related), LGA1155 boards are starting to trickle into Newegg (Link (http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007627%204804%20600093976&IsNodeId=1&name=LGA%201155&SpeTabStoreType=93))

[skinnee]

Frozen CPU


Phobya G1/4 Pressure Safety Valve Fitting - Black Nickel (Link (http://www.frozencpu.com/products/12607/?campid=sl))




What is the point of that thing? Someone please enlighten me here...

[meanmoe]

What is the point of that thing? Someone please enlighten me here...

It's just a relief valve. I have no clue why we'd use one. Maybe Naekuh would have use of it.

[Church]

skinnee: purposedly to ease minds of LC newbies that read a lot of prehistorical LC guides & myths. :). Even liquid level sensor for reservoirs despite ease of visual inspection of coolant levels in reservoir has more practical sense compared to this. :D

[skinnee]

@meanmoe: I know its a relief valve... but we don't want pressure relief.

Okay, so we're in agreement that it serves no practical purpose. :p:

[Waterlogged]

@meanmoe: I know its a relief valve... but we don't want pressure relief.

Okay, so we're in agreement that it serves no practical purpose. :p:

It'll help keep clampless tubing on the barbs. :p: :rofl:

It's also another old Koolance product that's been "borrowed"(Hint: We ridiculed it back then too ;)).

[Waterlogged]

Performance-PC's


Masterkleer Tubing PVC 13/10mm - Various colors (Link (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Masterkleer+Tubing+PVC+13%2F10mm))

Masterkleer Tubing PVC 19/13mm - Various colors (Link (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Masterkleer+Tubing+PVC+19%2F13mm))

Phobya Radiator Grill Quad (560) Stripes - Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30292))

Phobya Radiator Stand - Black - Triple 3x120mm/4x180 "Bench Edition" (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30316))

Phobya Nova 1080 Radiator Feet - Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30317))

Phobya Nova 1080 Radiator Grill 4 x 180mm- Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30318))

Phobya Quad Radiator Grill 4x120mm - Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30319))

[Church]

Imho Very interesting & handy addition to performance-pc's stock - 4/6/8/10 way 3-pin distribution mini-pcb-s (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=ModMyToys+Power+Distribution+PCB). IIRC Naekuh wished for such in this hobby for long time :). I made similar myself on black PCB with black connectors, but these might come in handy for others in their LC builds, to lessen wire clutter with many fans in push-pull on big rads.
(i'd check first though if rpm tach connection to all the rest but one connector are cut, to not confuse rpm readings)

[Waterlogged]

FrozenCPU

Bitspower G1/4 Black Sparkle 90° Diversion Fitting (Link (http://www.frozencpu.com/products/12617/ex-tub-810/Bitspower_G14_Black_Sparkle_90_Diversion_Fitting_B P-BSWP-C67.html?id=TIAwTqNj))

Bitspower G1/4 Matte Black 90° Diversion Fitting (Link (http://www.frozencpu.com/products/12618/ex-tub-811/Bitspower_G14_Matte_Black_90_Diversion_Fitting_BP-MBWP-C67.html?id=TIAwTqNj))

Bitspower G1/4 Silver Shining 90° Diversion Fitting(Link (http://www.frozencpu.com/products/12616/ex-tub-809/Bitspower_G14_Silver_Shining_90_Diversion_Fitting_ BP-WTP-C67.html?id=TIAwTqNj))

Phobya Radiator Housing Stand - Dual 2 x 120mm "Bench Edition" (Link (http://www.frozencpu.com/products/12652/ex-rad-221/Phobya_Radiator_Housing_Stand_-_Dual_2_x_120mm_Bench_Edition_38188.html?id=4PMd2Y p4))

Phobya Radiator Housing Stand - Triple 3 x 120mm / 4 x 180mm "Bench Edition" (Link (http://www.frozencpu.com/products/12653/ex-rad-222/Phobya_Radiator_Housing_Stand_-_Triple_3_x_120mm_4_x_180mm_Bench_Edition_38191.ht ml?id=4PMd2Yp4))

[jasoncrowley]

I really like that phobya stand.

[JoeBar]

Masterkleer Tubing PVC 19/13mm - Various colors (Link (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Masterkleer+Tubing+PVC+19%2F13mm))

Being using Primochill tubing (since pro LRT days) and just switched to Masterkleer. More than a happy camper here...! :D

Even though it's a bit stiffer than Primo, it takes a bit tighter bends and has greater looks and more reactiveness to UV. Top notch for us dye haters... :p:

[meanmoe]

Imho Very interesting & handy addition to performance-pc's stock - 4/6/8/10 way 3-pin distribution mini-pcb-s (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=ModMyToys+Power+Distribution+PCB).

very nice and long over due. Ordering now...

[SpuTnicK]

Laing DDC pump 18W repair kit SMT soldered MCP355 (http://cgi.ebay.com/Laing-DDC-pump-18W-repair-kit-SMT-soldered-MCP355-/330540505301?pt=LH_DefaultDomain_0&hash=item4cf5bfd8d5)

[Church]

What we need next - presoldered repair/upgrade kit with PWM regulation function similar to MCP35X :)

[Computurd]

hey guys a headsup on those Lamptron fittings...not to bash em or anything, but they dont bite well on certain barbs...be very careful proceed at your own risk!

http://www.xtremesystems.org/forums/showthread.php?p=4775602#post4775602

[skinnee]

Hold the phone... you're blaming the clamp?

Your temps reached thermal shutdown, tubing got hot and loosened from the barb, and you just fired the machine back up. You didn't check your connections, retighten the clamps or do any sort of checking and now you're scare mongering about the clamps. :shakes:

Sorry man, that leak is all on you.

[Computurd]

Your temps reached thermal shutdown, tubing got hot and loosened from the barb, and you just fired the machine back up. You didn't check your connections, retighten the clamps or do any sort of checking

woah there. i didnt fire it back up after the heat issue. that was all one incident there. it began overheating, and i heard it whoosh, and i unplugged it immediately, the damage was already done.
there was NO second boot after this issue.


now you're scare mongering about the clamps.

refernce post 68 & 71 and the following. these clamps wont work with all connectors. i did say to "be very careful proceed at your own risk!" and posted on other thread that i should have checked. but others have had similar experiences with these clamps, and they were tightened to the stopping point, and still were not tight! i did check the clamps, and they appeared tight at the time, but as i stateed they were on the block connected to the board. now when i took them off and tried they wiggled. maybe heat was a factor and the tubing went soft around them.,
BUT when i swap out new tubing, and use another clamp on the same barb, same issue!
i know heat was a factor, but in light of the fact that i have had three different barbs that it will not tighten on, even when tightened to stopping, and others have had the same issue, i stand by my comment!

"be very careful proceed at your own risk!"

EDIT: i am not saying of course that it isnt my fault, the pump got disconnected yea thats all me. just trying to let others know that this may be an issue. not MY issue, but an issue nonetheless. man i would be pissed if i blew up my system, then someone (like me for example) comes in and says "yea that same thing happened to me with that same gear, same issue, same gear! but i jsut didnt mention it in the very same thread i told everyone they were great in"

[Waterlogged]

woah there. i didnt fire it back up after the heat issue. that was all one incident there. it began overheating, and i heard it whoosh, and i unplugged it immediately, the damage was already done.
there was NO second boot after this issue.



refernce post 68 & 71 and the following. these clamps wont work with all connectors. i did say to "be very careful proceed at your own risk!" and posted on other thread that i should have checked. but others have had similar experiences with these clamps, and they were tightened to the stopping point, and still were not tight! i did check the clamps, and they appeared tight at the time, but as i stateed they were on the block connected to the board. now when i took them off and tried they wiggled. maybe heat was a factor and the tubing went soft around them.,
BUT when i swap out new tubing, and use another clamp on the same barb, same issue!
i know heat was a factor, but in light of the fact that i have had three different barbs that it will not tighten on, even when tightened to stopping, and others have had the same issue, i stand by my comment!

"be very careful proceed at your own risk!"

EDIT: i am not saying of course that it isnt my fault, the pump got disconnected yea thats all me. just trying to let others know that this may be an issue. not MY issue, but an issue nonetheless. man i would be pissed if i blew up my system, then someone (like me for example) comes in and says "yea that same thing happened to me with that same gear, same issue, same gear! but i jsut didnt mention it in the very same thread i told everyone they were great in"

Dude, sorry to see that your a victim of Lamptrons bad karma. Looks the dummies over there didn't take into account all the differences in barbs when they designed these (like evil-98 did). ;)

If there is anyone else that has problems tightening these clamps, I suggest you take them off and file (a small mill smooth file should do the job) open the gap at the screw area until you get a good bite on the tubing. Yes you will remove the anodized color but this can usually be replaced with some creative color matching with a permanent marker (the shop I worked at did this regularly for scratched ano).

[Computurd]

If there is anyone else that has problems tightening these clamps, I suggest you take them off and file (a small mill smooth file should do the job) open the gap at the screw area until you get a good bite on the tubing. Yes you will remove the anodized color but this can usually be replaced with some creative color matching with a permanent marker (the shop I worked at did this regularly for scratched ano).

thank you WL, now that is good advice!! :up:

[Waterlogged]

FrozenCPU

XSPC X20 200 Acrylic Pump / Reservoir Combo - Short Profile (Link (http://www.frozencpu.com/products/9684/ex-pmp-88/XSPC_X20_200_Acrylic_Pump_Reservoir_Combo_-_Short_Profile_-_Black_Silver.html))

EK Radeon HD 6870 VGA Liquid Cooling RAM Backplate - Nickel (Link (http://www.frozencpu.com/products/12661/ex-blc-878/EK_Radeon_HD_6870_VGA_Liquid_Cooling_RAM_Backplate _-_Nickel_EK-FC6870_Backplate_-_Nickel.html))

EK Radeon HD 6870 VGA Liquid Cooling RAM Backplate - Black (Link (http://www.frozencpu.com/products/12660/ex-blc-877/EK_Radeon_HD_6870_VGA_Liquid_Cooling_RAM_Backplate _-_Black_EK-FC6870_Backplate_-_Black.html))

Performance-PC's

Larkooler Extreme Performance Universal G1/4" Liquid Cooling Kit (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30378))

Larkooler Universal High Performance Complete CPU/VGA/Chipset/Mosfet Liquid Cooling Kit (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30377))

Xoxide

Koolance Radiator, 3x120mm 20-FPI Copper (Link (http://www.xoxide.com/koolance-radiator-3120mm20-fpicopper-nonozzles.html))

[NaeKuh]

waiting on a OK from koolance to show u guys a new innovation. ;)

no its not a water block, and no its not a res, nor is it a rad.

But its something ive been asking for. :)

[Waterlogged]

waiting on a OK from koolance to show u guys a new innovation. ;)

no its not a water block, and no its not a res, nor is it a rad.

But its something ive been asking for. :)

:slapass:

Not until they hit stores (and vendor stores are off limits) NaeKuh. :nono:...and yes, I'm pretty sure I know what they are. ;)

[zalbard]

waiting on a OK from koolance to show u guys a new innovation. ;)

no its not a water block, and no its not a res, nor is it a rad.

But its something ive been asking for. :)
Hmmm, interesting. Can't think of anything... Unless it's not a part but a finished sealed device...

[NaeKuh]

NaeKuh. :nono:...and yes, I'm pretty sure I know what they are. ;)

boo :down:

lol... well WL killed it for ya all. :rofl:

[Church]

Is it SLI/CF bridge for Koolance's gpu FCs? Or connector like for new restops but usable instead of tubing? (trying hard to remember what Tim been talking about recently). Daemn (c) Naekuh, you lighted up my interest now :D

[BrokenArrow]

Maybe a TEC waterblock?

[SpuTnicK]

What we need next - presoldered repair/upgrade kit with PWM regulation function similar to MCP35X :)

Well, it has internal PWM control already, is it not enough?:)

[Church]

Yup, i want exactly external ease of regulation w/o buying rheostats/controllers, from motherboard PWM fan headers. What/how pump engine controller works doesn't matter to me if it works :), black box principle.

[Waterlogged]

FrozenCPU

Tecnofront Nano Liquid Cooling Reservoir - Black Delrin (Link (http://www.frozencpu.com/products/12664/ex-res-258/Tecnofront_Nano_Liquid_Cooling_Reservoir_-_Black_Delrin.html?id=gQRhQ3n4))

Phobya G1/4 Knurled Stop Fitting - Black Nickel (Link (http://www.frozencpu.com/products/12672/ex-tub-812/Phobya_G14_Knurled_Stop_Fitting_-_Black_Nickel.html?id=gQRhQ3n4))

EK Gigabyte GA-X58A-UD7 Rev 2 Full Board Cooling Block Kit - Nickel + Acetal (Link (http://www.frozencpu.com/products/12670/ex-blc-880/EK_Gigabyte_GA-X58A-UD7_Rev_2_Full_Board_Cooling_Block_Kit_-_Nickel_Acetal_EK-FB_KIT_GA_X58A_UD7_rev20_-_NickelAcetal.html?id=gQRhQ3n4))

EK Gigabyte GA-X58A-UD7 Rev 2 Full Board Cooling Block Kit - Nickel (Link (http://www.frozencpu.com/products/12669/ex-blc-879/EK_Gigabyte_GA-X58A-UD7_Rev_2_Full_Board_Cooling_Block_Kit_-_Nickel_EK-FB_KIT_GA_X58A_UD7_rev20_-_Nickel.html?id=gQRhQ3n4))

Danger Den Monsoon "Premium" D5 / MCP655 Dual Bay Reservoir - Blue w/ Silver Trim / UV LEDs (Link (http://www.frozencpu.com/products/12676/ex-res-260/Danger_Den_Monsoon_Premium_D5_MCP655_Dual_Bay_Rese rvoir_-_Blue_w_Silver_Trim_UV_LEDs_RES-301.html?id=gQRhQ3n4))

Danger Den Monsoon "Premium" D5 / MCP655 Dual Bay Reservoir - Black w/ Silver Trim / UV LEDs (Link (http://www.frozencpu.com/products/12677/ex-res-261/Danger_Den_Monsoon_Premium_D5_MCP655_Dual_Bay_Rese rvoir_-_Black_w_Silver_Trim_UV_LEDs_RES-302.html?id=gQRhQ3n4))

Danger Den Monsoon "Premium" D5 / MCP655 Dual Bay Reservoir - Black w/ Black Trim / UV LEDs (Link (http://www.frozencpu.com/products/12675/ex-res-259/Danger_Den_Monsoon_Premium_D5_MCP655_Dual_Bay_Rese rvoir_-_Black_w_Black_Trim_UV_LEDs_RES-303.html?id=gQRhQ3n4))

Newegg

Enzotech BRCPS-G1/4-38-90 ID 3/8" Thread G1/4" Matt Black (Link (http://www.newegg.com/Product/Product.aspx?Item=N82E16835708125))

[Waterlogged]

FrozenCPU

Swiftech Apogee XT (Rev 2) High Performance CPU Waterblock - Sockets 775/1156/1366 (Link (http://www.frozencpu.com/products/12683/ex-blc-883/Swiftech_Apogee_XT_Rev_2_High_Performance_CPU_Wate rblock_-_Sockets_77511561366.html?id=UiqY6gbE))

EK Gigabyte GA-P67A-UD7 Full Board Cooling Block Kit - Nickel + Acetal (Link (http://www.frozencpu.com/products/12682/ex-blc-882/EK_Gigabyte_GA-P67A-UD7_Full_Board_Cooling_Block_Kit_-_Nickel_Acetal_EK-FB_KIT_GA_P67A_UD7_-_NickelAcetal.html?id=UiqY6gbE))

EK Gigabyte GA-P67A-UD7 Full Board Cooling Block Kit - Nickel (Link (http://www.frozencpu.com/products/12681/ex-blc-881/EK_Gigabyte_GA-P67A-UD7_Full_Board_Cooling_Block_Kit_-_Nickel_EK-FB_KIT_GA_P67A_UD7_-_Nickel.html?id=UiqY6gbE))

[Waterlogged]

FrozenCPU

3-Pin Power Distribution PCB's (Link (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=6AV9KVGo&searchspec=3-Pin+Power+Distribution+PCB&go.x=8&go.y=13))

Performance-PC's

Koolance Radiator Mounting Screw & Nut (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30408)) (this is what NaeKuh was so gung-ho about earlier)

Koolance 180-Degree Connector for RP-452X2 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30409))

Koolance 180-Degree Connector for RP-402X2 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30410))

[Utnorris]

The screws are an interesting idea, however it would be nice if they were in a 6-32 size. The two "U" tubes would be nice if they were adjustable. It would be great for things like mosfet to CPU connections.

[MagisD]

The screws are an interesting idea, however it would be nice if they were in a 6-32 size. The two "U" tubes would be nice if they were adjustable. It would be great for things like mosfet to CPU connections.

Koolance, 90s and sli fittings, beautiful thing.

Have 5 sets done in my build works great.


Sent from my X10a using Tapatalk

[Church]

Hmm, i wonder if these Primochill Myriad D5 restops (http://www.frozencpu.com/products/12709/ex-res-266/Primochill_Myriad_D5_Dual_Bay_Reservoir_Pump_Housi ng_D5_MCP655_PMP-450_-_UV_Green.html) @frozencpu are what was known as Typhoon IV?

[MagisD]

Sooooooo not touching that ^

Sent from my X10a using Tapatalk

[Waterlogged]

FrozenCPU

Koolance CPU-370 Liquid Cooling Extreme CPU Block (Link (http://www.frozencpu.com/products/12571/ex-blc-874/Koolance_CPU-370_Liquid_Cooling_Extreme_CPU_Block_-_No_Fittings_.html))

Magicool Extreme 120mm and 140mm Radiators (Link (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=YopIhgnQ&searchspec=magicool+extreme&go.x=11&go.y=15))

Koolance 180-Degree Connector for RP-452X2 (Link (http://www.frozencpu.com/products/12696/ex-res-263/Koolance_180-Degree_Connector_for_RP-452X2_CNT-RP452X2.html?id=3jKNRRWx))

Koolance 180-Degree Connector for RP-402X2 (Link (http://www.frozencpu.com/products/12695/ex-res-262/Koolance_180-Degree_Connector_for_RP-402X2_CNT-RP402X2.html?id=3jKNRRWx))

Fluid XP+ Extreme LC "Environmentally Safe" Liquid Cooling Fluid 32 oz. - UV Alien Green (Link (http://www.frozencpu.com/products/12680/ex-liq-163/Fluid_XP_Extreme_LC_Environmentally_Safe_Liquid_Co oling_Fluid_32_oz_-_UV_Alien_Green.html))

...and finally, as Churchy sort of pointed out a couple posts up.

Primochill Myriad D5 Dual Bay Reservoir / Pump Housing (D5 / MCP655 / PMP-450) - assorted colors (Link (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=3jKNRRWx&searchspec=Primochill+Myriad&go.x=0&go.y=0))


Performance-PC's

Fluid XP+ EXTreme LC - Ultra Coolant! - Alien UV Green (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30411))


Not really Liquid cooling but I know some are probably antsy to see it in stores

Lamptron FC-8- 30 Watts Per Channel 8 Channel Mulit-Color Fan Controller - Black (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30412))

[Utnorris]

Hmm, i wonder if these Primochill Myriad D5 restops (http://www.frozencpu.com/products/12709/ex-res-266/Primochill_Myriad_D5_Dual_Bay_Reservoir_Pump_Housi ng_D5_MCP655_PMP-450_-_UV_Green.html) @frozencpu are what was known as Typhoon IV?

I have one of the prototypes and it's actually not bad. Not as refined as the Monsoon or Koolance, but at the $90 price, it's pretty good. I wouldn't write it off just yet.

[SlowSVT]

Man I'm glad I have all my hardware installed so I have an excuse in not buying anything else off this thread.........OH WAIT! where did that fitting come from? arrrggghhhh!!!!!!!!! :shakes:

[NaeKuh]

OH WAIT! where did that fitting come from? arrrggghhhh!!!!!!!!! :shakes:



so whose down on a lynching party with to get WL for creating this thread.

I was really content with my system..

after reading and following this thread.. im like oh :banana::banana::banana::banana:.. i want that.. oh this would look nice.. ahh that looks fun...


Now im itching to tweek my already almost untweekable system because i see eye candy!

:shakes:

[Alexandr0s]

You only got yourself to blame for that NaeKuh, don't try to blame it on WL :p:.

[Vinas]

so whose down on a lynching party with to get WL for creating this thread.

I was really content with my system..

after reading and following this thread.. im like oh :banana::banana::banana::banana:.. i want that.. oh this would look nice.. ahh that looks fun...


Now im itching to tweek my already almost untweekable system because i see eye candy!

:shakes:
+1 yeah waterlogged look out you got us all in trouble for upgrading our loops again!!! Like I really need more rads I already got 600mm of rads on this loop!!! :ROTF: Guess it's gonna be 720mm now :rofl:

[Utnorris]

Yeah, I thought about replacing my EK HF block for the new 370 or the new XT, neither of which would be a needed upgrade, but every time I come in here I want something new.

But in all seriousness, good job WL. A lot of times we miss new products, so a thread like this is good to have.

[SlowSVT]

Yea, great job WL.............this thread has only set me back twice at a cost of over two hundred dollars with $60 spent on hose clamps alone :mad: I say we gather a mob, march over to his front lawn with pitch forks and torches demanding he locks this thread or we are going to replace his rig with a mac and get him a lifetime subscription to PC World magazine.

[Church]

I've seen in several common LC shops appearing BP fittings of new finish types, like red, true brass (golden look), diamond (black nickel look), but when checked out today link to BP's own shop noticed few others, eg. carbon (looks like matte black), from which most interesting seemed Bronze Age (http://www.bitspower.com.tw/index.php?main_page=advanced_search_result&search_in_description=1&keywordgroup=1&keyword=bronze+age) ones (look of stained old brass). Imho very good fit for old/wooden and steam-punkish builds. I'm guessing if someone is interested in such, he can mail to contacts of his favourite LC shops for them to be added to shop inventory. I almost regret going all matte-black in my build when seeing these bronze age fittings :)

[nvmc]

I felt the same way when I heard about the black anodized BP fittings. Just after buying some matte black ones.

[voigts]

I would SOOOOO like to see those BP Bronze Age fittings come about.

[Waterlogged]

A thousand pardons for going so long between updates. I've been knee deep in renovating the bathroom the past week or so. Still not done with it but had some free time ATM (as well as being awake long enough to write the post :p:) so I'll get this back up to speed and to date. ;)

FrozenCPU


Watercool MO-RA3 9 x 120mm LT Extreme Radiator - Black Powder Coat (Link (http://www.frozencpu.com/products/12735/ex-rad-233/Watercool_MO-RA3_9_x_120mm_LT_Extreme_Radiator_-_Black_Powder_Coat_22000.html))

Watercool MO-RA3 420 Blende Classic Fan Bracket (Link (http://www.frozencpu.com/products/12739/ex-rad-237/Watercool_MO-RA3_420_Blende_Classic_Fan_Bracket_22151.html))

Watercool MO-RA3 4 x 180mm LT Extreme Radiator - Black Powder Coat (Link (http://www.frozencpu.com/products/12736/ex-rad-234/Watercool_MO-RA3_4_x_180mm_LT_Extreme_Radiator_-_Black_Powder_Coat_22010.html))

Watercool MO-RA3 360 Core LC Extreme Radiator - Black Powder Coated (Link (http://www.frozencpu.com/products/12737/ex-rad-235/Watercool_MO-RA3_360_Core_LC_Extreme_Radiator_-_Black_Powder_Coated_22015.html))

Watercool MO-RA3 360 Blende Classic Fan Bracket (Link (http://www.frozencpu.com/products/12738/ex-rad-236/Watercool_MO-RA3_360_Blende_Classic_Fan_Bracket_22051.html))

Magicool Extreme Quad 120mm Radiator (Link (http://www.frozencpu.com/products/12724/ex-rad-232/Magicool_Extreme_Quad_120mm_Radiator_LC-RADI480S.html))

Magicool Hybrid Pro 3.5" HDD Water Block / Anti-Vibration Adapter (Link (http://www.frozencpu.com/products/12725/ex-blc-233/Magicool_Hybrid_Pro_35_HDD_Water_Block_Anti-Vibration_Adapter_MC-BLOCK-HDD.html))

EK GeForce 590 GTX VGA Liquid Cooling Block - Nickel (Link (http://www.frozencpu.com/products/12733/ex-blc-884/EK_GeForce_590_GTX_VGA_Liquid_Cooling_Block_-_Nickel_EK-FC590_GTX_-_Nickel_Hot_Item.html))

EK GeForce 590 GTX VGA Liquid Cooling Block - Nickel + Acetal (Link (http://www.frozencpu.com/products/12734/ex-blc-885/EK_GeForce_590_GTX_VGA_Liquid_Cooling_Block_-_Nickel_Acetal_EK-FC590_GTX_-_NickelAcetal_Hot_Item.html))

Bitspower G 1/4" Matte Black 90 Degree Triple Rotary Fitting Adapter (Male to Male) (Link (http://www.frozencpu.com/products/12720/ex-tub-814/Bitspower_G_14_Matte_Black_90_Degree_Triple_Rotary _Fitting_Adapter_Male_to_Male_BP-MB90R3G.html))

Bitspower G 1/4" Multi Transfer Base / Coupler - Matte Black (Link (http://www.frozencpu.com/products/12721/ex-tub-815/Bitspower_G_14_Multi_Transfer_Base_Coupler_-_Matte_Black_BP-MBWP-C03.html))


These have had a bit of discussion and there are some pretty strong mixed feelings about them but...anyway, they are now available for those that like/want them.


XSPC H1 Cube Enthusiast Water Cooling Super Chassis (Link (http://www.frozencpu.com/products/12726/cst-1092/XSPC_H1_Cube_Enthusiast_Water_Cooling_Super_Chassi s_-_Coming_Soon.html))

XSPC H2 Tower Enthusiast Water Cooling Super Chassis (Link (http://www.frozencpu.com/products/12727/cst-1093/XSPC_H2_Tower_Enthusiast_Water_Cooling_Super_Chass is_-_Coming_Soon.html))



Performance_PC's


Bitspower BP-MBWP-C68 Matte Black IG1/4" Multi-Link Adapter (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30423))

Bitspower BP-WTP-C68 Black Sparkle IG1/4" Multi-Link Adapter (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30422))

Bitspower BP-WTP-C68 Silver Shining IG1/4" Multi-Link Adapter (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30421))

Watercool HEATKILLER® GPU-X³ GTX560 "Hole Editon" for Reference Design GTX560 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30419))

Watercool HEATKILLER® GPU-X³ GTX560 for Nvidia Reference Design GTX560 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30418))

Watercool HEATKILLER® GPU-X² Dual-Link (3-Slot) (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30420))

Watercool HEATKILLER® GPU-X³ 68X0 "Hole Edition" for ATI Reference 68X0 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30417))

Watercool HEATKILLER® GPU-X³ 68X0 for ATI Reference Design 68X0 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30416))

Watercool HEATKILLER® GPU-X³ 6870 for ATI Reference Design 6870 (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30415))

XSPC G1/4" to (13mm) 1/2" Barb Fitting - Black Chrome Finish (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30414))



Newegg


Antec Kuhler H2O 620 Liquid Cooling System (Link (http://www.newegg.com/Product/Product.aspx?Item=N82E16835209049))

CORSAIR CWCH60 Hydro Series H60 High Performance Liquid CPU Cooler (Link (http://www.newegg.com/Product/Product.aspx?Item=N82E16835181015))

Enzotech BRCPS-G1/4-12-90 ID 1/2" Thread G1/4" Matt Black (Link (http://www.newegg.com/Product/Product.aspx?Item=N82E16835708123))


Again, as a reminder...by being in this topic, none of this crap is endorsed by myself. Just letting you folks know that it is available for ordering. ;)

btw...OVER 9000!!!:rofl:

[MagisD]

FrozenCPU

3-Pin Power Distribution PCB's (Link (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=6AV9KVGo&searchspec=3-Pin+Power+Distribution+PCB&go.x=8&go.y=13))



Where the hell were these before I spent 2 weeks rewireing/sleeveing fans .... And why the frack did it take so long for somebody to come out with them LOL .

[Utnorris]

The more I look at the XSPC cases, the more I like them. I still think they are overpriced, but they add some refinement to what MM has already done. Maybe this will push MM to be more innovative with their designs.

[Erdrick1980]

Wow! those XSPC cases are beautiful looking. Damn pricey though. Oh yeah, thanks Waterlogged for posting the new items. :up:

[Church]

I'd check, but those XSPC cases imho might have chance be better choice then MM simply because maker is in Europe. Shipping costs for big/heavy cases usually are high, so they may be cheaper (too lazy to check) then MM @EU side of pond. Just like EK rads get costlier stateside, and swiftech MCRs loose a bit of their price advantage in EU LC shops.

[Utnorris]

I'd check, but those XSPC cases imho might have chance be better choice then MM simply because maker is in Europe. Shipping costs for big/heavy cases usually are high, so they may be cheaper (too lazy to check) then MM @EU side of pond. Just like EK rads get costlier stateside, and swiftech MCRs loose a bit of their price advantage in EU LC shops.

Oh, yeah, definitely, I could see them being very popular overseas also. Heck, they may become the case people choose over MM here in the states if for nothing else, it's not MM and not everyone has one. Both cases have some nice features, such as the HD cage under the MB tray of the cube.

Edit: Wow!! I just read the manual on the tower and it's 100% modular. The MB tray can be inverted. You could technically install the HD cages into the bottom section if you were not going to put rads there. A lot of possibilities with the case that I did not notice at first glance. Hmmm...... $500 is not looking so bad now.

[Waterlogged]

FrozenCPU

XSPC H1 / H2 SSD Tray - Anodized Black XSPC H1 / H2 SSD Tray - Anodized Black (Link (http://www.frozencpu.com/products/12742/cpa-572/XSPC_H1_H2_SSD_Tray_-_Anodized_Black.html?id=fQPaYYLn))

XSPC H1 / H2 5.25" Bay Cover - Anodized Black XSPC H1 / H2 5.25" Bay Cover - Anodized Black (Link (http://www.frozencpu.com/products/12741/cpa-571/XSPC_H1_H2_525_Bay_Cover_-_Anodized_Black.html?id=fQPaYYLn))

XSPC H2 HDD Cage - Anodized Black (Link (http://www.frozencpu.com/products/12744/cpa-574/XSPC_H2_HDD_Cage_-_Anodized_Black.html?id=fQPaYYLn))

XSPC H1 HDD Cage - Anodized Black (Link (http://www.frozencpu.com/products/12743/cpa-573/XSPC_H1_HDD_Cage_-_Anodized_Black.html?id=fQPaYYLn))

Bitspower G1/4 Black Sparkle Multi-Link Adapter (BP-BSWP-68) (Link (http://www.frozencpu.com/products/12747/ex-tub-817/Bitspower_G14_Black_Sparkle_Multi-Link_Adapter_BP-BSWP-68.html?id=fQPaYYLn))

Bitspower G1/4 Matte Black Multi-Link Adapter (BP-MBWP-C68) (Link (http://www.frozencpu.com/products/12748/ex-tub-818/Bitspower_G14_Matte_Black_Multi-Link_Adapter_BP-MBWP-C68.html?id=fQPaYYLn))

Bitspower G1/4 Silver Shining Multi-Link Adapter (BP-WTP-C68) (Link (http://www.frozencpu.com/products/12746/ex-tub-816/Bitspower_G14_Silver_Shining_Multi-Link_Adapter_BP-WTP-C68.html?id=fQPaYYLn))


Performance-PC's

Primochill Myriad Reservoirs - various colors (Link (http://www.performance-pcs.com/catalog/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Primochill+myriad))

XSPC EXtreme Cases & accessories (Link (http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=103_978))

EK-CPU Easy Mount HF - Nickel (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30481))

EK-Supreme LTX (LIGHT Xtreme) CPU Water Block (AMD) - Acetal (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30480))

TOP Acetal - Supreme HF White Acetal (rev.) (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30479))

EK-FC590 GTX for Nvidia GTX 590 Reference Design - Nickel/Acetal (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30478))

EK-FC590 GTX for Nvidia GTX 590 Reference Design - Nickel (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30477))

EK-FB KIT GA P67A (UD7) - Nickel/Acetal (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30443))

EK-FB KIT GA P67A (UD7) - Nickel (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=30442))

[ohms]

The XSPC Hive 1 Cube case isn't that much more expensive then the MM UFO case and I bet you it comes better packaged :rolleyes: LOL

It doesn't look half bad, had I not bought the FT-02B already I would have bought one of those bad boys.

[Church]

Interesting, Koolance finally released black fittings (http://www.koolance.com/water-cooling/new_products.php). Probably soon will reach reseller shops.

[Utnorris]

Nice. Hopefully they will release QD's in black and in 1/2" ID, 3/4" OD. I prefer their collars to BP's because they don't eat up my fingers.

[zeropluszero]

what a shame, i really like koolance's gunmetal grey fittings.
god, its hard enough to find chromed fittings without another manufacturer getting into this whole "got any blacker" crap.

inb4 black cpu ihs.

[Church]

What a shame? Why release of different finish type fittings should somehow imply cancellation of old, gunmetal grey ones?
Why many of LCers that prefer black color components should adjust their taste just because YOU don't like such?
It seems hard to see failure on Koolance side in releasing diversified products that might get good demand in market.

[bundymania]

The XSPC Hive 1 Cube case isn't that much more expensive then the MM UFO case and I bet you it comes better packaged :rolleyes: LOL

It doesn't look half bad, had I not bought the FT-02B already I would have bought one of those bad boys.

XSPC H1 Cube is well packed :)

http://www.abload.de/thumb/img_1076r82w.jpg (http://www.abload.de/image.php?img=img_1076r82w.jpg)

http://www.abload.de/thumb/img_1080lm5d.jpg (http://www.abload.de/image.php?img=img_1080lm5d.jpg)

:yepp:

[zeropluszero]

What a shame? Why release of different finish type fittings should somehow imply cancellation of old, gunmetal grey ones?
Why many of LCers that prefer black color components should adjust their taste just because YOU don't like such?
It seems hard to see failure on Koolance side in releasing diversified products that might get good demand in market.
only in the sense that i makes the older stuff less popular, and hard to find. i cant buy silver shining bitspower 1/2" barbs in australia at the moment. i have to order from ppcs, which i detest.

[Johnny87au]

only in the sense that i makes the older stuff less popular, and hard to find. i cant buy silver shining bitspower 1/2" barbs in australia at the moment. i have to order from ppcs, which i detest.

Bitspower.tw :up:

[Waterlogged]

OK, so it was about a month ago that I lost net access due to a combination of things, and it took that long before I could do anything about it. I'm back now and have a question for you guys.

Do you want me to pick up as best as I can from where I left off or just wait until new stuff hits the stores to start this back up again?

I'll start back up next Sat. based on what you guys say. If you don't say anything, I'll start with freshly added instead of month old stuff.;)

[Church]

Just do selection batch of most noticeable stuff, leaving unimportant thingies out of picture.

[Utnorris]

I love this thread Watterlogged and if I didn't say it before, thank you very much for doing this. I sometimes miss things and this thread has helped me catch a few things. By the way, here are a few items of interest:

PerformancePCS
EK Easy mount adapter for oval tops - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_971_410&products_id=30750

EK Easy mount - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_971_410&products_id=30749

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_971_410&products_id=30481

1155 Backplate - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_971_410&products_id=30745

EK Supreme HF White top - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_971_410&products_id=30479

Enermax T.B. Silence 120mm x 25mm - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_49&products_id=28381

Enermax T.B. Silence 120mm x 25mm Blue LED - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_69&products_id=30510

Enermax T.B. Silence 120mm x 25mm Red LED - http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_69&products_id=30509

Sidewinders

EK Easy mount black - http://www.sidewindercomputers.com/ekeamohfbl.html

EK Easy mount nickel - http://www.sidewindercomputers.com/ekeamohfnifo.html

EK 1155 Back Plate - http://www.sidewindercomputers.com/ekwaektrba.html

Aquaero LT 5 - http://www.sidewindercomputers.com/aqlt4wdiandc.html

Aquaero 5 XT - http://www.sidewindercomputers.com/aq4usbfawhwi.html

Aquero 5 Pro - http://www.sidewindercomputers.com/aq4usbpufanc.html

Great deal on Thermochill Compression fittings - http://www.sidewindercomputers.com/thco3bsfor1x.html

Probably a lot more items out there, but still a good start.

[ohms]

Yes! Huge props to Waterlogged for this thread.

Had this thread not existed I would have never known about the XSPC H1 Cube :) But I hate you at the same time because I spent $499.00 on it.

[Utnorris]

Yes! Huge props to Waterlogged for this thread.

Had this thread not existed I would have never known about the XSPC H1 Cube :) But I hate you at the same time because I spent $499.00 on it.

Sweet. Better see a build log.

[Waterlogged]

Just do selection batch of most noticeable stuff, leaving unimportant thingies out of picture.

The question would be, what is deemed important and what isn't?

Doesn't look like there's a whole lot of interest in this topic any more. :confused::shrug:

[Utnorris]

I think there is, just because people do not post does not mean they do not have an interest in it. How many views has it had since the other day? It's had almost 12000 views since the first day it was started 3 months ago. That's an average of 4000 views a month or 133 views a day. There is interest, but people mainly want the information rather than talking about it.

Edit: Just an FYI, it's in the top 75 for most views, that includes all the reviews and testing that has been done here.

[zeropluszero]

still very interested, i just dont post.

[Kenjiwing]

still very interested, i just dont post.

same

[tw33ter]

still very interested, i just dont post.

+2

It's nice to have a centralized location for all the new stuff that comes out, rather then having to go searching throughout all the vendors. :up:

[ExSanguin8or]

+3

Found the XSPC 120mm Radiator Stands via this thread.

Thank you! Please keep it up!

:)


+2

It's nice to have a centralized location for all the new stuff that comes out, rather then having to go searching throughout all the vendors. :up:

[Waterlogged]

OK...so any chance you guys could vocalize your opinions on where I should pick up this topic? Poking through some of the backlog of new products has revealed a lot of things ppl may really want to know about but. . .I'd really rather not go through all that work if I don't really have too...yes, I'm a bit lazy. :p:

[Utnorris]

Just start with today and here might be an idea for you, why not do one category per day, say cpu blocks on Monday or whatever. Probably will have more than one category per day, but you get the idea. That way you are only looking for particular items and not everything, might be easier.

[theseeker]

I should have posted sooner. This is a great thread and you have cost me some bucks! Keep it up, please.
Rocky

[tw33ter]

or just do one update a week maybe?

[Computurd]

dude just keep em coming :)

[Alexandr0s]

Just start with today and here might be an idea for you, why not do one category per day, say cpu blocks on Monday or whatever. Probably will have more than one category per day, but you get the idea. That way you are only looking for particular items and not everything, might be easier.

+1. Great idea ^^.

[Waterlogged]

OK, so I've decided to do full update back to when I lost my net access. I'll be getting caught up in massive single store updates which I'll chip away at in my spare time and copy/paste them from gedit. This installment is April @ FrozenCPU. Next installment will be April @ Perf-PC's and should come in the next couple days. Until then, enjoy. ;)

If you find a broken link, please post and I fix it.

FrozenCPU

EK Supreme HF CPU Block Easy Mount Kit - Nickel (Link (http://www.frozencpu.com/products/12749/ex-blc-887/EK_Supreme_HF_CPU_Block_Easy_Mount_Kit_-_Nickel_-_EK-CPU_Easy_Mount_HF_-_Nickel.html))

Koolance VID-AR699 Radeon HD6990 VGA Liquid Cooling Block (No Fittings) (Link (http://www.frozencpu.com/products/12767/ex-blc-888/Koolance_VID-AR699_Radeon_HD6990_VGA_Liquid_Cooling_Block_No_Fi ttings.html))

Koolance Radiator Mounting Screw & Nut - 38mm (Link (http://www.frozencpu.com/products/12716/koo-275/Koolance_Radiator_Mounting_Screw_and_Nut_-_38mm_BLT-HX038.html))

Danger Den DD-GTX590 VGA Full Card Liquid Cooling Block (Link (http://www.frozencpu.com/products/12745/ex-blc-886/Danger_Den_DD-GTX590_VGA_Full_Card_Liquid_Cooling_Block_GPU-6940.html))

EK Radeon HD 6990 VGA Liquid Cooling Block - Nickel (Link (http://www.frozencpu.com/products/12813/ex-blc-889/EK_Radeon_HD_6990_VGA_Liquid_Cooling_Block_-_Nickel_EK-FC6990_Nickel.html))

EK Radeon HD 6990 VGA Liquid Cooling Block - Nickel + Acetal (Link (http://www.frozencpu.com/products/12814/ex-blc-890/EK_Radeon_HD_6990_VGA_Liquid_Cooling_Block_-_Nickel_Acetal_EK-FC6990_NickelAcetal.html))

Danger Den DD-6990 VGA Full Card Liquid Cooling Block (Link (http://www.frozencpu.com/products/12884/ex-blc-891/Danger_Den_DD-6990_VGA_Full_Card_Liquid_Cooling_Block_GPU-6990.html))

Heatkiller MB-SET ASUS P8P67 LT / Pro / Evo / Deluxe - Full Coverage Water Block Kit - Acetal Top (Link (http://www.frozencpu.com/products/12907/ex-blc-904/Heatkiller_MB-SET_ASUS_P8P67_LT_Pro_Evo_Deluxe_-_Full_Coverage_Water_Block_Kit_-_Acetal_Top_11401.html))

Heatkiller MB-SET ASUS P8P67 / Pro / Evo / Deluxe - Full Coverage Water Block Kit - Copper Top (Link (http://www.frozencpu.com/products/12906/ex-blc-903/Heatkiller_MB-SET_ASUS_P8P67_Pro_Evo_Deluxe_-_Full_Coverage_Water_Block_Kit_-_Copper_Top_11400.html))

Heatkiller GPU-X³ GTX 570 / 580 nVidia GTX 570/580 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12904/ex-blc-901/Heatkiller_GPU-X_GTX_570_580_nVidia_GTX_570580_Reference_Design_F ull_Coverage_Water_Block_15510.html))

Heatkiller GPU-X³ GTX 570 / 580 -Hole Edition- nVidia GTX 570/580 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12905/ex-blc-902/Heatkiller_GPU-X_GTX_570_580_-Hole_Edition-_nVidia_GTX_570580_Reference_Design_Full_Coverage_ Water_Block_15511.html))

Heatkiller GPU-X³ GTX 560 nVidia GTX 560 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12902/ex-blc-899/Heatkiller_GPU-X_GTX_560_nVidia_GTX_560_Reference_Design_Full_Cov erage_Water_Block_15507.html))

Heatkiller GPU-X³ GTX 560 -Hole Edition- nVidia GTX 560 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12903/ex-blc-900/Heatkiller_GPU-X_GTX_560_-Hole_Edition-_nVidia_GTX_560_Reference_Design_Full_Coverage_Wat er_Block_15508.html))

Heatkiller GPU-X³ 69X0 ATI Radeon 6950 / 6970 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12898/ex-blc-895/Heatkiller_GPU-X_69X0_ATI_Radeon_6950_6970_Reference_Design_Full_ Coverage_Water_Block_15009.html))

Heatkiller GPU-X³ 69X0 -Hole Edition- ATI Radeon 6950 / 6970 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12899/ex-blc-896/Heatkiller_GPU-X_69X0_-Hole_Edition-_ATI_Radeon_6950_6970_Reference_Design_Full_Covera ge_Water_Block_15010.html))

Heatkiller GPU-X³ 6990 LT ATI Radeon 6990 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12900/ex-blc-897/Heatkiller_GPU-X_6990_LT_ATI_Radeon_6990_Reference_Design_Full_Co verage_Water_Block_13055.html))

Heatkiller GPU-X³ 6990 -Hole Edition- ATI Radeon 6990 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12901/ex-blc-898/Heatkiller_GPU-X_6990_-Hole_Edition-_ATI_Radeon_6990_Reference_Design_Full_Coverage_Wa ter_Block_15015.html))

Heatkiller GPU-X³ 6870 ATI Radeon 6870 Reference Design Full Coverage Water Block (Link (http://www.frozencpu.com/products/12897/ex-blc-894/Heatkiller_GPU-X_6870_ATI_Radeon_6870_Reference_Design_Full_Cover age_Water_Block_15007.html))

XSPC X20 450 Acrylic Pump / Reservoir Combo - Small Profile (Link (http://www.frozencpu.com/products/12694/ex-pmp-128/XSPC_X20_450_Acrylic_Pump_Reservoir_Combo_-_Small_Profile.html))

XSPC Reservoir Fillcap to G1/4" Adapter (M20 x 1.5mm to G1/4") (Link (http://www.frozencpu.com/products/12693/ex-tub-813/XSPC_Reservoir_Fillcap_to_G14_Adapter_M20_x_15mm_t o_G14.html))

Antec KUHLER H2O 620 High Performance Liquid Cooling System (Link (http://www.frozencpu.com/products/12557/ex-wat-165/Antec_KUHLER_H2O_620_High_Performance_Liquid_Cooli ng_System.html))

Phobya Triple 420 Radiator Grill - HEX - Black Powder Coat (Link (http://www.frozencpu.com/products/12942/ffa-57/Phobya_Triple_420_Radiator_Grill_-_HEX_-_Black_Powder_Coat.html))

Phobya Single 140 Radiator Grill - HEX - Black Powder Coat (Link (http://www.frozencpu.com/products/12940/ffa-55/Phobya_Single_140_Radiator_Grill_-_HEX_-_Black_Powder_Coat.html))

Phobya Dual 280 Radiator Grill - HEX - Black Powder Coat (Link (http://www.frozencpu.com/products/12941/ffa-56/Phobya_Dual_280_Radiator_Grill_-_HEX_-_Black_Powder_Coat.html))

Koolance CTR-SPD10 12V Pump or Fan Speed Controller (Link (http://www.frozencpu.com/products/12820/ex-pmp-129/Koolance_CTR-SPD10_12V_Pump_or_Fan_Speed_Controller.html))

Phobya G-Changer Ver. 1.2 480mm Radiator - Black (Link (http://www.frozencpu.com/products/12965/ex-rad-241/Phobya_G-Changer_Ver_12_480mm_Radiator_-_Black_35227.html))

Phobya G-Changer Ver. 1.2 360mm Radiator - Black (Link (http://www.frozencpu.com/products/12964/ex-rad-240/Phobya_G-Changer_Ver_12_360mm_Radiator_-_Black_35223.html))

Phobya G-Changer 240mm Radiator - Black / Silver Mount Frame (Link (http://www.frozencpu.com/products/12963/ex-rad-239/Phobya_G-Changer_240mm_Radiator_-_Black_Silver_Mount_Frame.html))

Phobya G-Changer 120mm Ver. 1.1 Radiator - Black (Link (http://www.frozencpu.com/products/12962/ex-rad-238/Phobya_G-Changer_120mm_Ver_11_Radiator_-_Black.html))

Phobya G-Changer 560mm Radiator - Black (Link (http://www.frozencpu.com/products/13015/ex-rad-245/Phobya_G-Changer_560mm_Radiator_-_Black_35228.html))

Phobya G-Changer 420mm Radiator - Black (Link (http://www.frozencpu.com/products/13014/ex-rad-244/Phobya_G-Changer_420mm_Radiator_-_Black_35196.html))

Phobya G-Changer 280mm Radiator - Black (Link (http://www.frozencpu.com/products/13013/ex-rad-243/Phobya_G-Changer_280mm_Radiator_-_Black_35195.html))

Phobya G-Changer 140mm Radiator - Black (Link (http://www.frozencpu.com/products/13010/ex-rad-242/Phobya_G-Changer_140mm_Radiator_-_Black_35194.html))

Koolance VID-NX590 NVIDIA GTX 590 VGA Liquid Cooling Block (No Fittings) (Link (http://www.frozencpu.com/products/12961/ex-blc-906/Koolance_VID-NX590_NVIDIA_GTX_590_VGA_Liquid_Cooling_Block_No_F ittings.html))

Ek TRUE Backplate EK-LGA115x True Backplate (EK-LGA115x TRUE Backplate) (Link (http://www.frozencpu.com/products/12960/ex-blc-905/Ek_TRUE_Backplate_EK-LGA115x_True_Backplate_EK-LGA115x_TRUE_Backplate.html))

Ek H30 Supreme LT 360 Advanced Liquid Cooling Kit (Link (http://www.frozencpu.com/products/13006/ex-wat-167/Ek_H30_Supreme_LT_360_Advanced_Liquid_Cooling_Kit_ EK-KIT_H3O_-_Supreme_LT_360.html))

EK GeForce 5X0 GTX GW VGA Liquid Cooling Block - Nickel + Acetal - Non Reference Design (Link (http://www.frozencpu.com/products/13005/ex-blc-908/EK_GeForce_5X0_GTX_GW_VGA_Liquid_Cooling_Block_-_Nickel_Acetal_EK-FC5X0_GTX_GW_-_NickelAcetal_-_Non_Reference_Design.html))

EK GeForce 5X0 GTX GW VGA Liquid Cooling Block - Nickel - Non Reference Design (Link (http://www.frozencpu.com/products/13004/ex-blc-907/EK_GeForce_5X0_GTX_GW_VGA_Liquid_Cooling_Block_-_Nickel_EK-FC5X0_GTX_GW_-_Nickel_-_Non_Reference_Design.html))

EK GeForce 590 GTX VGA Liquid Cooling RAM Backplate - Black (Link (http://www.frozencpu.com/products/13007/ex-blc-909/EK_GeForce_590_GTX_VGA_Liquid_Cooling_RAM_Backplat e_-_Black_EK-FC590_GTX_Backplate_-_Black.html))

EK GeForce 5X0 GTX VGA Liquid Cooling RAM Backplate - Black -Non Reference Design(Link (http://www.frozencpu.com/products/13055/ex-blc-912/EK_GeForce_5X0_GTX_VGA_Liquid_Cooling_RAM_Backplat e_-_Black_EK-FC5X0_GTX_GW_Backplate_-_Black_-_Non_Reference_Design.html))

EK ASUS Max4 Extreme Full Board Cooling Block Kit - Nickel + Acetal (Link (http://www.frozencpu.com/products/13054/ex-blc-911/EK_ASUS_Max4_Extreme_Full_Board_Cooling_Block_Kit_-_Nickel_Acetal_EK-FB_ASUS_Max4_Extreme_-_NickelAcetal.html))

EK ASUS Max4 Extreme Full Board Cooling Block Kit - Nickel (Link (http://www.frozencpu.com/products/13053/ex-blc-910/EK_ASUS_Max4_Extreme_Full_Board_Cooling_Block_Kit_-_Nickel_EK-FB_ASUS_Max4_Extreme_-_Nickel.html))

Koolance EXT-440CU Cooling System, Copper [no nozzles] (Link (http://www.frozencpu.com/products/13057/ex-wat-168/Koolance_EXT-440CU_Cooling_System_Copper_no_nozzles.html))

Koolance Bracket Mounting Kit for EXT-440 (Link (http://www.frozencpu.com/products/13058/ex-wat-169/Koolance_Bracket_Mounting_Kit_for_EXT-440_BKT-EXT440.html))

Koolance Bracket for AMD AM2/AM3, Intel Xeon (Link (http://www.frozencpu.com/products/13056/koo-276/Koolance_Bracket_for_AMD_AM2AM3_Intel_Xeon_CPU-360370_BKT-CPU3703.html))

Koolance 140mm Fan Cover for EXT-440 (Link (http://www.frozencpu.com/products/13059/ex-wat-170/Koolance_140mm_Fan_Cover_for_EXT-440_SHR-EXT440140.html))

Koolance Radiator Mounting Screw & Nut - 25mm (Link (http://www.frozencpu.com/products/13060/koo-277/Koolance_Radiator_Mounting_Screw_and_Nut_-_25mm_BLT-HX025.html))

Koolance CTR-SPD24X2 Dual 24V Pump Controller (Link (http://www.frozencpu.com/products/13061/ex-pmp-130/Koolance_CTR-SPD24X2_Dual_24V_Pump_Controller.html))

Laser Cut Reusable Radiator Template - Dual 120mm - 15mm Spacing (Link (http://www.frozencpu.com/products/13037/ex-rad-246/Laser_Cut_Reusable_Radiator_Template_-_Dual_120mm_-_15mm_Spacing.html))

Antec KUHLER H2O 920 High Performance Liquid Cooling System (Link (http://www.frozencpu.com/products/12915/ex-wat-166/Antec_KUHLER_H2O_920_High_Performance_Liquid_Cooli ng_System.html))

Little Devil LD PC-V8 ATX Liquid Cooling PC Case - 4 Way SLI Motherboard Tray - Black / Red(Link (http://www.frozencpu.com/products/13046/cst-1101/Little_Devil_LD_PC-V8_ATX_Liquid_Cooling_PC_Case_-_4_Way_SLI_Motherboard_Tray_-_Black_Red.html))

Little Devil LD PC-V8 Reverse ATX Liquid Cooling PC Case - 4 Way SLI Motherboard Tray - Black (Link (http://www.frozencpu.com/products/13048/cst-1103/Little_Devil_LD_PC-V8_Reverse_ATX_Liquid_Cooling_PC_Case_-_4_Way_SLI_Motherboard_Tray_-_Black.html))

Koolance 1/2" (13mm) ID G1/4 Threaded Barb Pair w/ Hose Clamps (Link (http://www.frozencpu.com/products/13062/koo-278/Koolance_12_13mm_ID_G14_Threaded_Barb_Pair_w_Hose_ Clamps_NZL-V13BP.html?id=FHzmpCUf))

PrimoChill Liquid Utopia Bomb Bottle - 15mL - Clear (Link (http://www.frozencpu.com/products/13066/ex-liq-164/PrimoChill_Liquid_Utopia_Bomb_Bottle_-_15mL_-_Clear_PCLUBT-CLR.html))

PrimoChill Concentrated Dye Bomber - 15mL - Various colors(Link (http://www.frozencpu.com/search.html?mv_profile=keyword_search&mv_session_id=FHzmpCUf&searchspec=PrimoChill+Concentrated+Dye+Bomber+-+15mL+-+Black+%09PrimoChill+Concentrated+Dye+Bomber&go.x=14&go.y=11))

[arkadur]

great work. keep it up
dont forget the new bitspower Ram block.

[Utnorris]

Now this is friggin cool:

http://www.frozencpu.com/products/13208/ex-res-287/FrozenQ_PC_Mods_Blue_Meteor_Light_Limited_Edition_ Reservoir_-_Blue_Warp_Drive.html?tl=g30c97s1110

Watch the video after the description to see how it works. FrozenQ did an awesome job on this one.

[Kenjiwing]

Now this is friggin cool:

http://www.frozencpu.com/products/13208/ex-res-287/FrozenQ_PC_Mods_Blue_Meteor_Light_Limited_Edition_ Reservoir_-_Blue_Warp_Drive.html?tl=g30c97s1110

Watch the video after the description to see how it works. FrozenQ did an awesome job on this one.

He posted about making that Res here on XS a long time ago.. weird to see it on frozencpu now lol

[Computurd]

yea thats sweet, where is Trans Am?

[Church]

Noticed available in stock new swiftech 20FPI rads @frozencpu (http://www.frozencpu.com/search.html?mv_profile=keyword_search&searchspec=Swiftech+XP+Slim)

[Waterlogged]

Noticed available in stock new swiftech 20FPI rads @frozencpu (http://www.frozencpu.com/search.html?mv_profile=keyword_search&searchspec=Swiftech+XP+Slim)

:slap: :p:

I was going to revive this topic on Sat with everything from the start of July.

While we're on the topic of Swifty rads though. . .the 320 and 420 versions have been available at Xoxide for a few days now as well.

Now hopefully Gabe and company will be able to stop dragging their feet and go full speed ahead on the 140's...I've already had to forgo using one of the two I was going to get because I need that build finished really soon and simply couldn't wait any longer. These have simply taken way to long to show up since they made the mistake of listing them on the new site, I'm starting to think these are going to be Siftech's "Admiralgate".:upset::soap:

[Waterlogged]

As promised.

FrozenCPU

Heatkiller GPU-X³ GTX 590 - Hole Edition - nVidia GTX 590 Reference Design Full Coverage Water Block - (Link (http://www.frozencpu.com/products/13601/ex-blc-936/Heatkiller_GPU-X_GTX_590_-Hole_Edition-_nVidia_GTX_590_Reference_Design_Full_Coverage_Wat er_Block_15515.html))

Heatkiller GPU-X³ GTX 590 LT nVidia GTX 590 Reference Design Full Coverage Water Block 9Link (http://www.frozencpu.com/products/13600/ex-blc-935/Heatkiller_GPU-X_GTX_590_LT_nVidia_GTX_590_Reference_Design_Full_ Coverage_Water_Block_13100.html))

Swiftech MCR120-XP eXtreme Performance 120mm Slim Radiator - (Link (http://www.frozencpu.com/products/13544/ex-rad-261/Swiftech_MCR120-XP_eXtreme_Performance_120mm_Slim_Radiator_-_MCR120-XP.html))

Swiftech MCR220-XP eXtreme Performance Dual 120mm Slim Radiator - (Link (http://www.frozencpu.com/products/13545/ex-rad-262/Swiftech_MCR220-XP_eXtreme_Performance_Dual_120mm_Slim_Radiator_-_MCR220-XP.html))

Swiftech MCR320-XP eXtreme Performance Triple 120mm Slim Radiator - (Link (http://www.frozencpu.com/products/13547/ex-rad-263/Swiftech_MCR320-XP_eXtreme_Performance_Triple_120mm_Slim_Radiator_-_MCR320-XP.html))

Swiftech MCR420-XP eXtreme Performance Quad 120mm Slim Radiator - (Link (http://www.frozencpu.com/products/13546/ex-rad-264/Swiftech_MCR420-XP_eXtreme_Performance_Quad_120mm_Slim_Radiator_-_MCR420-XP.html))

Corsair Hydro Series H80 High Performance Dual Fan CPU Cooler - (Link (http://www.frozencpu.com/products/13376/ex-wat-175/Corsair_Hydro_Series_H80_High_Performance_Dual_Fan _CPU_Cooler_CWCH80_-_Sockets_775_1156_1366_AM2_AM3.html))

EK GeForce 560 GTX VGA Liquid Cooling Block - Acetal - (Link (http://www.frozencpu.com/products/13572/ex-blc-934/EK_GeForce_560_GTX_VGA_Liquid_Cooling_Block_-_Acetal_EK-FC560_GTX_-_Acetal.html))

Danger Den DD-GTX560 VGA Full Card Liquid Cooling Block - Smoke Top / Copper Base - (Link (http://www.frozencpu.com/products/13536/ex-blc-933/Danger_Den_DD-GTX560_VGA_Full_Card_Liquid_Cooling_Block_-_Smoke_Top_Copper_Base_GPU-6940-SA.html))

Ek H30 Supreme HF 240 CU Advanced Liquid Cooling Kit - (Link (http://www.frozencpu.com/products/13561/ex-wat-176/Ek_H30_Supreme_HF_240_CU_Advanced_Liquid_Cooling_K it_EK-KIT_H3O_-_Supreme_HF_240_CU.html))

Swiftech Apogee XTL (Rev 2) High Performance CPU Waterblock - Acetal - (Link (http://www.frozencpu.com/products/13405/ex-blc-923/Swiftech_Apogee_XTL_Rev_2_High_Performance_CPU_Wat erblock_-_Acetal_-_Sockets_77511561366.html))

Swiftech MCP35X Optional Tank Reservoir Attachment - Rev. 2b - (Link (http://www.frozencpu.com/products/12104/ex-res-245/Swiftech_MCP35X_Optional_Tank_Reservoir_Attachment _-_Rev_2b_MCP35X-RES.html))




Performance-PC's

Koolance TNK-501 Single 5.25" Bay Reservoir - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31234))

Koolance 4x120mm Radiator Enclosure/Riser - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31235))

Ybris BLACK SUN PVD BLACK S775/1156/1366 Limited Edition - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31252))

Ybris BLACK SUN PVD BLACK AM2/AM3 Limited Edition - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31253))

Aquacomputer AquagrATIx for HD 6990 (Antilles) G1/4, Nickel-Plated Version - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31262))

Alphacool Cape Bullseye Bay - Black Edition - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31260))

Phobya Quad Radiator Grill 4x120mm - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31259))

MIPS ASUS P8x6x Deluxe Dual Mosfet POM - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31258))

MIPS ASUS P8P7 Series Set Nickel POM Limited Edition - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31257))

MIPS ASUS Maximus 4 Fullcover POM - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31256))



Xoxide

Swiftech MCR320-XP eXtreme Performance Radiator - (Link (http://www.xoxide.com/swiftech-mcr320-xp.html))

Swiftech MCR420-XP eXtreme Performance Radiator - (Link (http://www.xoxide.com/swiftech-mcr420-xp.html))



If anything is hinky with any links, just let me know here and I'll fix it. :up:

[Waterlogged]

Performance-PC's

Koolance RP-452X2 Dual 5.25" Reservoir for 1-2 PMP-450/S Pumps Rev 1.1 - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31314))

[fr0wn3r]

Just keep posting mate, like others I don't post but still interested in it! :up:

[Waterlogged]

FrozenCPU

Koolance Triple 120mm Copper High Flow Radiator - 20 FPI - Black ( HX-CU1320VS) (No Nozzles) - (Link (http://www.frozencpu.com/products/13643/ex-rad-268/Koolance_Triple_120mm_Copper_High_Flow_Radiator_-_20_FPI_-_Black_HX-CU1320VS_No_Nozzles_.html?id=p4rCksLg))

Koolance TMS-EB205 Software Expansion Board - (Link (http://www.frozencpu.com/products/13644/koo-305/Koolance_TMS-EB205_Software_Expansion_Board.html?id=p4rCksLg))

Koolance TMS-205 Software Thermal Interface Controller - (Link (http://www.frozencpu.com/products/13645/koo-306/Koolance_TMS-205_Software_Thermal_Interface_Controller.html?id= p4rCksLg))



Performance-PC's

Bitspower G1/4" Silver Shining Dual Rotary Angle IG1/4" Extender - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31318&zenid=c5a41c72196347163c934c552a8a9948))

Bitspower G1/4" Silver Shining Dual Rotary Angle G1/4" Extender - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31317&zenid=c5a41c72196347163c934c552a8a9948))

Bitspower G1/4" Black Sparkling Dual Rotary Angle IG1/4" Extender - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31315&zenid=c5a41c72196347163c934c552a8a9948))

Bitspower G1/4" Black Sparkle Dual Rotary Angle G1/4" Extender - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31316&zenid=c5a41c72196347163c934c552a8a9948))

Bitspower Black Freezer VG-NGTX580 Acrylic Top w/ Black Sparkle Stainless Panel - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31337&zenid=c5a41c72196347163c934c552a8a9948))

EK-FC560 GTX - Copper + Acetal - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31342&zenid=c5a41c72196347163c934c552a8a9948))
This last one is for Sadasius, go on dude, you know you want them. :D ;)

San Ace 109P1412M101 Ultimate 140mm High Speed Case Fan- Sleeved - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31238&zenid=c5a41c72196347163c934c552a8a9948))

[Waterlogged]

Performance-PC's

Swiftech "eXtreme Performance" Single 120mm Radiator - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31349&zenid=9e763ef8a6be9fa5fad9ea0e522f8b21))

Swiftech "eXtreme Performance" Dual 120mm Radiator - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31350&zenid=9e763ef8a6be9fa5fad9ea0e522f8b21))

Swiftech "eXtreme Performance" Triple 120mm Radiator - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31351&zenid=9e763ef8a6be9fa5fad9ea0e522f8b21))

Swiftech "eXtreme Performance" Quad 120mm Radiator - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31352&zenid=9e763ef8a6be9fa5fad9ea0e522f8b21))

[Waterlogged]

Massive update!

FrozenCPU

Phobya G1/4 Female to Female Adapter - Silver Nickel - (Link (http://www.frozencpu.com/products/13668/ex-tub-963/Phobya_G14_Female_to_Female_Adapter_-_Silver_Nickel_64008.html))

Phobya G1/4 Female to Female Adapter - Black Nickel - (Link (http://www.frozencpu.com/products/13669/ex-tub-964/Phobya_G14_Female_to_Female_Adapter_-_Black_Nickel_64049.html))

Phobya DC12-400 12V Water Cooling Pump - (Link (http://www.frozencpu.com/products/13692/ex-pmp-142/Phobya_DC12-400_12V_Water_Cooling_Pump_-_DC12-400.html))

Phobya DC12-260 12V Water Cooling Pump - (DC12-260) Phobya DC12-260 12V Water Cooling Pump - (Link (http://www.frozencpu.com/products/13691/ex-pmp-141/Phobya_DC12-260_12V_Water_Cooling_Pump_-_DC12-260.html))

Phobya DC12-220 12V Water Cooling Pump - (Link (http://www.frozencpu.com/products/13690/ex-pmp-140/Phobya_DC12-220_12V_Water_Cooling_Pump_-_DC12-220.html))

Phobya Anti-Twist G1/4 Female to G1/4 Male Extender - Silver Nickel - (Link (http://www.frozencpu.com/products/13674/ex-tub-969/Phobya_Anti-Twist_G14_Female_to_G14_Male_Extender_-_Silver_Nickel_64105.html))

Phobya Anti-Twist G1/4 Female to G1/4 Male Extender - Black Nickel - (Link (http://www.frozencpu.com/products/13675/ex-tub-970/Phobya_Anti-Twist_G14_Female_to_G14_Male_Extender_-_Black_Nickel_64106.html))

Phobya Anti-Twist G1/4 Female to G1/4 Female Adapter - Silver Nickel - (Link (http://www.frozencpu.com/products/13672/ex-tub-967/Phobya_Anti-Twist_G14_Female_to_G14_Female_Adapter_-_Silver_Nickel_64112.html))

Phobya Anti-Twist G1/4 Female to G1/4 Female Adapter - Black Nickel - (Link (http://www.frozencpu.com/products/13673/ex-tub-968/Phobya_Anti-Twist_G14_Female_to_G14_Female_Adapter_-_Black_Nickel_64112.html))

Phobya 90 Degree Elbow Fitting - Silver Nickel - (Link (http://www.frozencpu.com/products/13665/ex-tub-960/Phobya_90_Degree_Elbow_Fitting_-_Silver_Nickel_64089.html))

Phobya 90 Degree Elbow Fitting - Black Nickel - (Link (http://www.frozencpu.com/products/13664/ex-tub-959/Phobya_90_Degree_Elbow_Fitting_-_Black_Nickel_64090.html))

Phobya 60° Angled G1/4 Female to G1/4 Male Rotary Extender - Silver Nickel - (Link (http://www.frozencpu.com/products/13678/ex-tub-973/Phobya_60_Angled_G14_Female_to_G14_Male_Rotary_Ext ender_-_Silver_Nickel_64180.html))

Phobya 60° Angled G1/4 Female to G1/4 Male Rotary Extender - Black Nickel - (Link (http://www.frozencpu.com/products/13679/ex-tub-974/Phobya_60_Angled_G14_Female_to_G14_Male_Rotary_Ext ender_-_Black_Nickel_64180.html))

Phobya 45° Angled G1/4 Female to G1/4 Male Rotary Low Profile Adapter - Chrome - (Link (http://www.frozencpu.com/products/13680/ex-tub-975/Phobya_45_Angled_G14_Female_to_G14_Male_Rotary_Low _Profile_Adapter_-_Chrome_64064.html))

Phobya 45° Angled G1/4 Female to G1/4 Male Rotary Adapter - Silver Nickel - (Link (http://www.frozencpu.com/products/13681/ex-tub-976/Phobya_45_Angled_G14_Female_to_G14_Male_Rotary_Ada pter_-_Silver_Nickel_64182.html))

Phobya 45° Angled G1/4 Female to G1/4 Male Rotary Adapter - Black Nickel - (Link (http://www.frozencpu.com/products/13682/ex-tub-977/Phobya_45_Angled_G14_Female_to_G14_Male_Rotary_Ada pter_-_Black_Nickel_64181.html))

Phobya 30° Angled G1/4 Female to G1/4 Male Rotary Extender - Silver Nickel - (Link (http://www.frozencpu.com/products/13676/ex-tub-971/Phobya_30_Angled_G14_Female_to_G14_Male_Rotary_Ext ender_-_Silver_Nickel_64178.html))

Phobya 30° Angled G1/4 Female to G1/4 Male Rotary Extender - Black Nickel - (Link (http://www.frozencpu.com/products/13677/ex-tub-972/Phobya_30_Angled_G14_Female_to_G14_Male_Rotary_Ext ender_-_Black_Nickel_64179.html))

Phobya 180° Variable SLI Connector - Silver Nickel - (Link (http://www.frozencpu.com/products/13670/ex-tub-965/Phobya_180_Variable_SLI_Connector_-_Silver_Nickel_64187.html))

Phobya 180° Variable SLI Connector - Black Nickel - (Link (http://www.frozencpu.com/products/13671/ex-tub-966/Phobya_180_Variable_SLI_Connector_-_Black_Nickel_64188.html))

Phobya 180 Degree T Bock - Silver Nickel (64091) Phobya 180 Degree T Bock - Silver Nickel - (Link (http://www.frozencpu.com/products/13667/ex-tub-962/Phobya_180_Degree_T_Bock_-_Silver_Nickel_64091.html))

Phobya 180 Degree T Bock - Black Nickel - (Link (http://www.frozencpu.com/products/13666/ex-tub-961/Phobya_180_Degree_T_Bock_-_Black_Nickel_64092.html))

FrozenCPU Lighted Crystal LED G3/8 Plug (without LED) - (Link (http://www.frozencpu.com/products/13686/ex-tub-978/FrozenCPU_Lighted_Crystal_LED_G38_Plug_without_LED .html))

Alphacool HF 38 Flowbooster G1/4 to G3/8 Adapter - (Link (http://www.frozencpu.com/products/13663/ex-tub-958/Alphacool_HF_38_Flowbooster_G14_to_G38_Adapter_.ht ml))

Phobya Triple 420 Radiator Grill - HEX - Silver - (Link (http://www.frozencpu.com/products/13733/ffa-73/Phobya_Triple_420_Radiator_Grill_-_HEX_-_Silver.html))

Phobya Triple 420 Radiator Grill - Bricky - Silver - (Link (http://www.frozencpu.com/products/13734/ffa-74/Phobya_Triple_420_Radiator_Grill_-_Bricky_-_Silver.html))

Phobya Triple 420 Radiator Grill - Bricky - Black Powder Coat - (Link (http://www.frozencpu.com/products/13735/ffa-75/Phobya_Triple_420_Radiator_Grill_-_Bricky_-_Black_Powder_Coat.html))

Phobya Triple 360 Radiator Grill - Stripes - Black Powder Coat - (Link (http://www.frozencpu.com/products/13713/ffa-72/Phobya_Triple_360_Radiator_Grill_-_Stripes_-_Black_Powder_Coat.html))

Phobya Triple 360 Radiator Grill - Bricky - Silver - (Link (http://www.frozencpu.com/products/13711/ffa-70/Phobya_Triple_360_Radiator_Grill_-_Bricky_-_Silver.html))

Phobya Triple 360 Radiator Grill - Bricky - Black Powder Coat - (Link (http://www.frozencpu.com/products/13712/ffa-71/Phobya_Triple_360_Radiator_Grill_-_Bricky_-_Black_Powder_Coat.html))

Phobya Single 140 Radiator Grill - Stripes - Black Powder Coat - (Link (http://www.frozencpu.com/products/13704/ffa-63/Phobya_Single_140_Radiator_Grill_-_Stripes_-_Black_Powder_Coat.html))

Phobya Single 140 Radiator Grill - HEX - Silver - (Link (http://www.frozencpu.com/products/13699/ffa-58/Phobya_Single_140_Radiator_Grill_-_HEX_-_Silver.html))

Phobya Single 140 Radiator Grill - Bricky - Silver - (Link (http://www.frozencpu.com/products/13702/ffa-61/Phobya_Single_140_Radiator_Grill_-_Bricky_-_Silver.html))

Phobya Single 140 Radiator Grill - Bricky - Black Powder Coat - (Link (http://www.frozencpu.com/products/13703/ffa-62/Phobya_Single_140_Radiator_Grill_-_Bricky_-_Black_Powder_Coat.html))

Phobya Single 120 Radiator Grill - Bricky - Silver - (Link (http://www.frozencpu.com/products/13700/ffa-59/Phobya_Single_120_Radiator_Grill_-_Bricky_-_Silver.html))

Phobya Single 120 Radiator Grill - Bricky - Black Powder Coat - (Link (http://www.frozencpu.com/products/13701/ffa-60/Phobya_Single_120_Radiator_Grill_-_Bricky_-_Black_Powder_Coat.html))

Phobya Dual 280 Radiator Grill - Stripes - Black Powder Coat - (Link (http://www.frozencpu.com/products/13709/ffa-68/Phobya_Dual_280_Radiator_Grill_-_Stripes_-_Black_Powder_Coat.html))

Phobya Dual 280 Radiator Grill - HEX - Silver - (Link (http://www.frozencpu.com/products/13710/ffa-69/Phobya_Dual_280_Radiator_Grill_-_HEX_-_Silver.html))

Phobya Dual 280 Radiator Grill - Bricky - Silver - (Link (http://www.frozencpu.com/products/13707/ffa-66/Phobya_Dual_280_Radiator_Grill_-_Bricky_-_Silver.html))

Phobya Dual 280 Radiator Grill - Bricky - Black Powder Coat - (Link (http://www.frozencpu.com/products/13708/ffa-67/Phobya_Dual_280_Radiator_Grill_-_Bricky_-_Black_Powder_Coat.html))

Phobya Dual 240 Radiator Grill - Bricky - Silver - (Link (http://www.frozencpu.com/products/13706/ffa-64/Phobya_Dual_240_Radiator_Grill_-_Bricky_-_Silver.html))

Phobya Dual 240 Radiator Grill - Bricky - Black Powder Coat - (Link (http://www.frozencpu.com/products/13705/ffa-65/Phobya_Dual_240_Radiator_Grill_-_Bricky_-_Black_Powder_Coat.html))

Aquacomputer G1/4 Flow Meter Sensor Block - (Aquaero Series / Poweradjust / Fan-O-Matic Pro / Alphacool Heatmaster) - (Link (http://www.frozencpu.com/products/13694/bus-270/Aquacomputer_G14_Flow_Meter_Sensor_Block_-_Aquaero_Series_Poweradjust_Fan-O-Matic_Pro_Alphacool_Heatmaster_53068.html))

Aquacomputer Aquaero 5 LT USB Fan Controller Liquid System Controller - (Link (http://www.frozencpu.com/products/13696/bus-271/Aquacomputer_Aquaero_5_LT_USB_Fan_Controller_Liqui d_System_Controller.html))

Danger Den Black UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31360))

Danger Den Blue UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31354))

Danger Den Blue UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31359))

Danger Den Clear UV DreamFLex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31353))

Danger Den Clear UV DreamFLex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31358))

Danger Den Green UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31357))

Danger Den Green UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31361))

Danger Den Red UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31356))

Danger Den Red UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31362))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 3/8"ID x 5/8"OD ) - UV Red - (Link (http://www.frozencpu.com/products/13725/ex-tub-989/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_38ID_x_58OD_-_UV_Red.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 3/8"ID x 5/8"OD ) - UV Green - (Link (http://www.frozencpu.com/products/13726/ex-tub-987/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_38ID_x_58OD_-_UV_Green.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 3/8"ID x 5/8"OD ) - UV Blue - (Link (http://www.frozencpu.com/products/13724/ex-tub-985/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_38ID_x_58OD_-_UV_Blue.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 3/8"ID x 5/8"OD ) - UV Black - (Link (http://www.frozencpu.com/products/13727/ex-tub-991/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_38ID_x_58OD_-_UV_Black.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 3/8"ID x 5/8"OD ) - Clear UV - (Link (http://www.frozencpu.com/products/13723/ex-tub-983/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_38ID_x_58OD_-_Clear_UV.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 1/2"ID x 3/4"OD ) - UV Red - (Link (Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 1/2"ID x 3/4"OD ) - UV Red))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 1/2"ID x 3/4"OD ) - UV Green - (Link (http://www.frozencpu.com/products/13732/ex-tub-988/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_12ID_x_34OD_-_UV_Green.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 1/2"ID x 3/4"OD ) - UV Blue - (Link (http://www.frozencpu.com/products/13728/ex-tub-986/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_12ID_x_34OD_-_UV_Blue.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 1/2"ID x 3/4"OD ) - UV Black - (Link (http://www.frozencpu.com/products/13731/ex-tub-992/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_12ID_x_34OD_-_UV_Black.html))

Danger Den DreamFlex Value Pack - Tubing / Clamps / Tube Cutter ( 1/2"ID x 3/4"OD ) - Clear UV - (Link (http://www.frozencpu.com/products/13730/ex-tub-984/Danger_Den_DreamFlex_Value_Pack_-_Tubing_Clamps_Tube_Cutter_12ID_x_34OD_-_Clear_UV.html))


Performance-PC's

Danger Den Black UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31355))

Danger Den Black UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31360))

Danger Den Blue UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31354))

Danger Den Blue UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31359))

Danger Den Clear UV DreamFLex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31353))

Danger Den Clear UV DreamFLex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31358))

Danger Den Green UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31357))

Danger Den Green UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31361))

Danger Den Red UV DreamFlex All-in-One "Retail Pack" - 1/2" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31356))

Danger Den Red UV DreamFlex All-in-One "Retail Pack" - 3/8" ID Tubing - (Link (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&products_id=31362))


Again, if anything is hinky with any links, just let me know here and I'll fix it.


Reminder: Being mentioned in this topic is not an endorsement by myself, just letting you know this stuff is available. ;)