PDA

View Full Version : Let's see your Sandy Bridge w/c temps!



Wipeout
02-02-2011, 11:01 AM
I got my first Sandy Bridge temporary liquid cooling (wow, fingers instinctively type liquor instead of liquid..) rig together and I was wondering how my temps compare.

Intel i5 2500K 3.3 @ 4.5, auto VCore (1.00 - 1.30 in CPU-Z), AS Ceramique
ASUS P8P67-M PRO
8GB G.Skill PC3-12800 9-9-9-24 1600Mhz
G.Skill Phoenix Pro 120GB SSD
Galaxy GTX 470
NZXT Hale90 850W

Swiftech MCP655 pump
Thermaltake 2x120 rad
Thermaltake waterblock (temporary while fittings for Apogee GTZ come)
LOTS of tubing! (radiator is going to eventually go outside, MN winters are good for sub zero core temps, board has been insulated)

~17C core temp idle, ~56C core temp load (using RealTemp). Also, I noticed temps jump around a lot at idle. Kind of weird. Anyway, let's see your temps!

Daddyjaxx
02-02-2011, 04:32 PM
Get rid of the Thermaltake stuff. It's loaded with Aluminum. You throw a GTZ into that mix....corrosion city. It also is not very good on performance.

EK Supreme HF
2 x 470 DD W/B's
1 355 pump
XSPC RX 360

My temps are not much higher than yours with a lot more voltage and two graphics cards in the loop.

http://img16.imageshack.us/img16/6332/5127b.jpg

MyPBG4Died
02-02-2011, 04:51 PM
I am using an XSPC RS240 kit.
XSPC Rasa CPU block
X20 750 pump
XSPC RS 240

4.5 ghz 1.29 vcore
Temps at idle are 26,22,19,25
Temps load are 52,52,46,49

Wipeout
02-04-2011, 10:01 AM
I'm at 4.8 p95 stable at 1.38 vcore, 66C load. The crap Thermaltake waterblock is all copper, at least. I run antifreeze.. do I still have to worry about corrosion?

Quad-Damage
02-04-2011, 10:13 AM
See Sig

@ 4.6 ghz 1.31 Vcore

17c idel 52c at max I love water :)

thegcpu
02-04-2011, 10:58 AM
Daddyjaxx

Is that you in the ATL....

Levesque
02-04-2011, 11:57 AM
4.9 (49x100) @ 1.35v Prime & LinX stable. All cores around 22-23 celsius idle, and between 55-58 celsius on high loads (Prime, LinX).

I'm able to do 5.4 (54X100) at 1.42-1.43v, but still tweaking. Temps are around the same. I have a delta 3 water/air.:)

thegcpu
02-04-2011, 01:13 PM
Gentlemen, all this data is useless without ambient temps given. I can run an i7 860 with 1.5 v 4.4 GHZ with speed step on and get 6 c at idle. But what is my ambient temp?


Take some guesses....

BeepBeep2
02-04-2011, 01:34 PM
Gentlemen, all this data is useless without ambient temps given. I can run an i7 860 with 1.5 v 4.4 GHZ with speed step on and get 6 c at idle. But what is my ambient temp?


Take some guesses....

lololol it reports you running at 1337 Mhz :ROTF:

thegcpu
02-04-2011, 01:39 PM
lololol it reports you running at 1337 Mhz :ROTF:



I did make the statment WITH SPEED STEP ON!!!!

But your not getting the point.. LOL

Eldonko
02-04-2011, 02:19 PM
I run 24/7 @ 5Ghz, 1.38v LL2, H20 cooling. Temps 52C load when FAH, 60-63 load LinX.

trn
02-04-2011, 03:24 PM
But your not getting the piont.. LOL

1337 http://en.wikipedia.org/wiki/Leet

coolhandluke41
02-04-2011, 04:02 PM
ambient 75F ,all fans 800rpm ( P95 blend 1h+)
http://img204.imageshack.us/img204/5227/temptv.jpg (http://img204.imageshack.us/i/temptv.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

thegcpu
02-04-2011, 04:38 PM
1337 http://en.wikipedia.org/wiki/Leet

:rofl::up::ROTF: