Gentle Typhoon -15 Or Noise Blocker XLP Fans

[ezaleina]

Hi all.,i would like to ask all of liquid cooling guru's here about my plan wanna change from dual rad to triple rad or maybe quad rad.,my target is Swiftech MCR320 or EK Coolstream XT 480 rad.,but the fan makes me in dilemma.,i dunno which fans will suit the rad better.,would all the guru's here give me any advice between Gentle Typhoon -15 or Noise Blocker XLP to pair with the rad i stated above..TQ..

Sorry for my bad english..:)

[GabryICE]

Hi all.,i would like to ask all of liquid cooling guru's here about my plan wanna change from dual rad to triple rad or maybe quad rad.,my target is Swiftech MCR320 or EK Coolstream XT 480 rad.,but the fan makes me in dilemma.,i dunno which fans will suit the rad better.,would all the guru's here give me any advice between Gentle Typhoon -15 or Noise Blocker XLP to pair with the rad i stated above..TQ..

Sorry for my bad english..:)

I'd go for Noiseblocker XLP very good quality fan! :up:

[ezaleina]

I'd go for Noiseblocker XLP very good quality fan! :up:

tq GabryICE..

[stephanel1345]

I HAD A WATERCOOL SYSTEM INCLUDING

2 XSPC RX 480 + 2 PA 120.3

I USE 14 fans AP 15 GENTLE TYPHOON ( mounting in push position with thermochill shroud modded )

RESULTS ARE GREAT, HIGH STATIC PRESSURE WITH LOW NOISE
AT 5 VOLTS 840 RPM VERY SILENT
AT 12 VOLTS VERY STRONG BUT MORE NOISY, EQUAL TO NFP 12 NOCTUA :p::p::p::p::p:

AFTER SHUTDOWN THE PC, THEY TURN ALWAYS DURING 30 SECONDS !!!!

MAGNETIC RESISTANCE IN THE MOTOR IS VERY LOW.:D:D:D


i give you my temp

D5 MODDED + HK 3.0 COOPER + AMD X2 940 3.7 GHZ + HD 4870X2 OC + EK WATERBLOCK + 2 X RX 480 + 2 X PA 120.3 + 1 SLIM MAGICOOL 420 PUSH PULL + EK RESERVOIR 400 WITH SPECIAL TUBE FOR BREAKING TURBULENCES

IDE
CPU 37 DEGRES
GPU 28 DEGRES

FULL
CPU 45 DEGRES :D
GPU 36 DEGRES :up:

WATER TEMP 26 DEGRES, ROOM AT 22 DEGRES :ROTF:

ARE THEY ENOUGH EFFICIENT FOR YOU ????


They perform vey well with high static pressure. Go to the website of servo japan for confirm what i write.:up::up::up::up:

They use only 1 watt each, it s perfect when you have few of this.

have a good trip

[ezaleina]

I HAD A WATERCOOL SYSTEM INCLUDING

2 XSPC RX 480 + 2 PA 120.3

I USE 14 fans AP 15 GENTLE TYPHOON ( mounting in push position with thermochill shroud modded )

RESULTS ARE GREAT, HIGH STATIC PRESSURE WITH LOW NOISE
AT 5 VOLTS 840 RPM VERY SILENT
AT 12 VOLTS VERY STRONG BUT MORE NOISY, EQUAL TO NFP 12 NOCTUA :p::p::p::p::p:

AFTER SHUTDOWN THE PC, THEY TURN ALWAYS DURING 30 SECONDS !!!!

MAGNETIC RESISTANCE IN THE MOTOR IS VERY LOW.:D:D:D


i give you my temp

D5 MODDED + HK 3.0 COOPER + AMD X2 940 3.7 GHZ + HD 4870X2 OC + EK WATERBLOCK + 2 X RX 480 + 2 X PA 120.3 + 1 SLIM MAGICOOL 420 PUSH PULL + EK RESERVOIR 400 WITH SPECIAL TUBE FOR BREAKING TURBULENCES

IDE
CPU 37 DEGRES
GPU 28 DEGRES

FULL
CPU 45 DEGRES :D
GPU 36 DEGRES :up:

WATER TEMP 26 DEGRES, ROOM AT 22 DEGRES :ROTF:

ARE THEY ENOUGH EFFICIENT FOR YOU ????


They perform vey well with high static pressure. Go to the website of servo japan for confirm what i write.:up::up::up::up:

They use only 1 watt each, it s perfect when you have few of this.

have a good trip


hey.,tq so much fren.,i think its enough for me to make decision which one to choose..thanks again man..:up:

[NaeKuh]

i would use a noise blocker on an open fan, or someplace where u want to show off bling.
NB fans are pure bling... :D

A GT when you need the quiet / performance.

I personally lost all concept of silent cooling. Your talking to a person who has over 12 san aces inside there computer. :P

[ezaleina]

i would use a noise blocker on an open fan, or someplace where u want to show off bling.
NB fans are pure bling... :D

A GT when you need the quiet / performance.

I personally lost all concept of silent cooling. Your talking to a person who has over 12 san aces inside there computer. :P

thanks man.,i also think get the NB besides of GT.,here in malaysia gt more 20-30 bucks than NB..

[NaeKuh]

thanks man.,i also think get the NB besides of GT.,here in malaysia gt more 20-30 bucks than NB..

OMG... dont get the GT's then...

How about yates?

Get push / pull yates and downvolt them massively if your after both silence + performance.

Meaning have 6 fans instead of 3.

[ezaleina]

OMG... dont get the GT's then...

How about yates?

Get push / pull yates and downvolt them massively if your after both silence + performance.

Meaning have 6 fans instead of 3.

yeah bro.,here not many sellers got the GT or the NB.,bout the yates also hard to find.,if ordered from oversea the delivery cost more than the fan itself..:(

[NaeKuh]

use the noise blockers then.

20-30 dollar premium on any fan is not worth it, unless it was something magical.

[ezaleina]

use the noise blockers then.

20-30 dollar premium on any fan is not worth it, unless it was something magical.

thanks man.,here all the wc stuff is more expensive than outside.,the feser 480 rad also cost me 500 bucks when convert to ringgit malaysia..

[millertime359]

thanks man.,here all the wc stuff is more expensive than outside.,the feser 480 rad also cost me 500 bucks when convert to ringgit malaysia..

:eek:

Ouch. Should of taken a trip to the USA and brought a bag full of watercooling equipment back with you. ;)

[ezaleina]

:eek:

Ouch. Should of taken a trip to the USA and brought a bag full of watercooling equipment back with you. ;)

yeah.,if i had chance to go US or UK.,i wanna buy everything i want for my loop..and also bought xtra can make some money here..:D

[ezaleina]

i think for the wc stuff i've spent more than 3k including fitting.,the 90 degrees BP cost me 50 bucks each..

[ascl]

Why are you buying locally at those prices? Import your stuff from the US... its what I did when I was in Hong Kong.

[Boyu]

GT fan are made in Indonesia, but i can't find any retailer that sell it in here, pathetic. haha

[gmat]

GT fan are made in Indonesia, but i can't find any retailer that sell it in here, pathetic. haha
That's where the factory is, but the company who makes them (Nidec Servo) is Japanese, you might try and import them from Japan instead...