Thermochill Radiator Measurements

[viper2004]

I'm trying to figure out what radiator will fit the best on the top of a Lian Li A05n case. It will be external so I also need to figure out a good way of mounting it.

My current idea is to mount either a thermochill 140.3 or 120.3 using one of the thermochill shrouds to mount the radiator. The fan hole side would slip underneath a fan grill that I already have on top of my case (triple 120 iandh stealth grill) if I were to mount a 140.3 which would create a sandwich of case-shroud-grill and the pressure would keep the shroud in place. If I were to mount the 120.3 I would just have the screws go through both the shroud and the grill.

In both cases the shroud would be upside-down and I could just screw the shroud to the sides of the radiator and would be a pretty good looking mount.

What I need to know in order to figure out which to use are some measurements on both radiators and a shroud.

Here are some pictures of the measurements I need:

http://i186.photobucket.com/albums/x90/Viper_demon2003/Work%20Log/rad.jpg

http://i186.photobucket.com/albums/x90/Viper_demon2003/Work%20Log/shroud.jpg

Thanks for any help and I'm definitely open to suggestions. I just want to make sure I can still use the top ports of the case with a large radiator on there. Also, I want to stick with a thermochill radiator because I like the way they look and they offer excellent performance. Not to mention they also have holes on the side of them for mounting.

[aka_GK]

is it 140.3 on your first pic? if yes, A to B is approx. 24mm

[shazza]

Don't know if this helps, but here's a snapshot of the 140.3 on top of the A05 case:

http://shazza53.smugmug.com/Computers/Black-Pearl/A05radiators/625544571_LzPUM-S.jpg

[viper2004]

is it 140.3 on your first pic? if yes, A to B is approx. 24mm

Not sure which one I grabbed but I was looking for the measurement of both a 140.3 and 120.3. Thanks for measuring that one


@ Shazza

Lol, it sure looks huge compared to that case. If I go with a 140.3 it will be hanging about 80mm past the back of the case which I would be okay with considering the performance increase.

[skinnee]

In the first pic... mount hole to end tank

PA120.3 24.5mm spacing - 32mm
PA120.3 15mm spacing - 21.5mm

:toast:

[viper2004]

In the first pic... mount hole to end tank

PA120.3 24.5mm spacing - 32mm
PA120.3 15mm spacing - 21.5mm

:toast:

Thanks :D

If the holes on the shroud are at least 12 mm wide then a 120.3 should work perfectly.