View Full Version : #6 ti4200 :)
Maranello
08-14-2002, 01:05 PM
i still have some playing to do with rivatuner.... new to the p4 thing still :)
http://service.madonion.com/compare?2k1=4198978
RichBa5tard
08-14-2002, 02:26 PM
nicely done!
I'm stuck at 12300, but then again, I don't have a kickass P4 setup. ;)
Maranello
08-14-2002, 10:15 PM
#3 now with 14019
http://service.madonion.com/compare?2k1=4201172
needs more juice ;)
RichBa5tard
08-15-2002, 01:58 AM
Which brand / clockspeed of that Ti4200? Seems like a good one. :)
Maranello
08-15-2002, 04:18 AM
oem leaktek @ 334/625. its the oem they sell at newegg.
Creative
08-15-2002, 06:25 AM
Originally posted by Maranello
#3 now with 14019
http://service.madonion.com/compare?2k1=4201172
needs more juice ;)
http://service.madonion.com/compare?2k1=4114984
Grrr knocked me off 3rd spot ya bastard :D
hehehe
Now I have to see if this AS3 has kicked in after the past week and try to get more from this card....:)
Bring it :p
hehehe
Maranello
08-15-2002, 03:50 PM
make that #2
:banana: :banana: :banana:
http://service.madonion.com/compare?2k1=4206986
sjohnson
08-15-2002, 04:19 PM
Thought you used Win2k - wha happen? :)
Congrats!
Maranello
08-15-2002, 04:53 PM
better scores with winxp.... i hate winxp but a score is a score :D
Creative
08-15-2002, 05:49 PM
So the 200 point increase is just going from Win2K to XP?
hmmmmmm
damn you cos i fully tweaked my system and then you just come along and do that :mad: :p :D
hehehehe
Maranello
08-15-2002, 05:51 PM
no... increase was a memory bandwidth increase.
Creative
08-15-2002, 06:05 PM
hmmm i cant view those scores now, saying its not valid?
How high was the increase in memory dood? I missed the specs on the compare when looking before
I neeeed my It7 to get back infront ;)
hehehe
Maranello
08-15-2002, 06:19 PM
no, its valid.... i raised my dram timing and enabled enhanced dram while raising my ddr voltage. the pci divider was changed too
Creative
08-15-2002, 07:03 PM
Rogethat I found that when locked at 33/66 i wasnt getting higher when ocing the vid card then i bumped up the pci to 44/88 and it helped heaps...:)
Also I found that enhance dram didnt do anything for me in sandra so didnt try in 3dmark....:(
COngrats dood and well done
:)
Niceee ;]
hm..btw.. What Bios u're using??
Maranello
08-15-2002, 08:57 PM
using the bios that came on the board..... 8Y? going to try the A4 tomorrow.
Very nice once again, Maranello!
Keep it up...make KAIN work for it ;)
Maranello
08-16-2002, 08:07 AM
im about at the end of my rope here...lol. squeezed 5mhz more out of the core ... now 340/625... other then that ill have to play with bios settings more. i think KIAN is safe :D
http://service.madonion.com/compare?2k1=4207647
Originally posted by Maranello
im about at the end of my rope here...lol. squeezed 5mhz more out of the core ... now 340/625... other then that ill have to play with bios settings more. i think KIAN is safe :D
http://service.madonion.com/compare?2k1=4207647
wow 340/625:eek: :eek:
What kind off cooling?
What she does @stock cooling?
:D
Maranello
08-16-2002, 09:48 AM
cooling is the vantec....
http://www.nexfan.com/29/212.htm?772
stock i can run 330/625. the fins are long enough to extend over the mounting holes... a screw on each corner holds it nice. It weighs about as much as the crystal orb so my ti4200 isnt ready to bend in half. the back of the card is only slightly warm so it must be working :D i have ram sinks on the ram but it still wont clock higher then 625 with or w/o them... its using hynics (sp?) memory dont know the #'s.
MuFf|n M@N
08-16-2002, 01:54 PM
yes your vid card is using hynix i have the same exact card but cant go over 310/570 but i haven't modded it yet nor have i added voltage to the I/O
Maranello
08-16-2002, 03:02 PM
wonder why.... right out of the box it was doing 330/625 on my 8k3a+... aimed a 68cfm delta (huh...what) at it and got 335/625 using the stock hsf but it wasnt stable when i was "on the edge". now with the vantec its 340/625 but anything higher at any fsb and it locks as soon as car chase low detail starts.
Hardass
08-16-2002, 04:17 PM
When your benching, how much do you raise the core and memory each time you make a run?
Maranello
08-16-2002, 05:06 PM
i go by 2's until i fail then back it off 1mhz.
Creative
08-16-2002, 07:41 PM
Nice dood. I might have to get some fans aiming at my card cos its just sitting in the slot atm. I tried 330/650 today and she froze so looks like 325/650 is my limit.
Im going to try putting the mem down so I can raise the core and see what happens. You and KAIN are safe for now.....I need my IT7 ;)
hehehe
:)
Doh.. just got mine today !
XFX 64mb rev1.2
http://service.madonion.com/compare?2k1=4251460 so far..
btw.. this is not fare.. i have a 1.8a :P
i think i can squeeze some + mhz from cpu and core.. ;p
Bravo
08-21-2002, 06:48 PM
Hey N8 :)
Mind some company (http://www.xtremesystems.org/forums/showthread.php?s=&threadid=2553)
I came so close with the Triplex card (13,060), but im gonna do it this time :)
Maranello
08-21-2002, 09:38 PM
im #1 for amd with 13500 :D then the kx7 and my tbrd died so i had to quit:mad:
Bravo
08-21-2002, 11:22 PM
Originally posted by Maranello
im #1 for amd with 13500 :D then the kx7 and my tbrd died so i had to quit:mad:
I saw that, i dont think it would be unreasonable to come within 100 - 200 points of that with a palomino and 200mhz FSB.
I also have this on the books for my new card:
http://home.iprimus.com.au/crashdummy1/pics/gpu.gif
spaceboy
09-02-2002, 09:30 AM
lovely KX7 ;)
my 4200 is a POS
http://service.madonion.com/compare?2k1=4371040