Dopamin3
12-10-2009, 09:21 PM
Specs are:
DFI x58-T3eH8
i7 920 d0 3931A324
3 x 2gb OCZ Platinum 1600mhz 7-7-7-24
Corsair TX850W
http://valid.canardpc.com/cache/screenshot/875620.png (http://valid.canardpc.com/show_oc.php?id=875620)
http://img192.imageshack.us/img192/5814/72724183.png (http://img689.imageshack.us/img689/2412/63600814.png)
Just got into the platform and I have 4ghz small fft stable. The problem is I can't stabilize a blend test. A few of the workers instantly fail.
Could someone give me some advice? I've tried CPU VTT up to 1.4v with no luck, also CPU vcore up to 1.3v. Here are my bios settings if it helps anyone (and yes the memory is rated for 1.65v but passes many loops of memtest86+ on 1.62v):
O.C. Shut Down Free: Enable O.C.S.D.F
CPU VID Control: 1.2000v
CPU VID Special Add Limit: Enabled
CPU VID Special Add: Auto
Vcore Droop Control: Disabled
DRAM Bus Voltage: 1.620v
DRAM PWM Switch Frequency: Nominal
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.34v
VTT PWM Switch Frequency: Nominal
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.90v
IOH/ICH 1.1V Voltage: 1.21v
IOH Analog Voltage: 1.20v
ICH 1.5 Voltage: 1.5v
ICH 1.05V Voltage: 1.15v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
ADDR/CMD VREF Control: Disabled
x DIMM 1/2 ADDR/CMD Bus VREF: 110
x DIMM 3/4 ADDR/CMD Bus VREF: 110
x DIMM 5/6 ADDR/CMD Bus VREF: 110
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Normal
DFI x58-T3eH8
i7 920 d0 3931A324
3 x 2gb OCZ Platinum 1600mhz 7-7-7-24
Corsair TX850W
http://valid.canardpc.com/cache/screenshot/875620.png (http://valid.canardpc.com/show_oc.php?id=875620)
http://img192.imageshack.us/img192/5814/72724183.png (http://img689.imageshack.us/img689/2412/63600814.png)
Just got into the platform and I have 4ghz small fft stable. The problem is I can't stabilize a blend test. A few of the workers instantly fail.
Could someone give me some advice? I've tried CPU VTT up to 1.4v with no luck, also CPU vcore up to 1.3v. Here are my bios settings if it helps anyone (and yes the memory is rated for 1.65v but passes many loops of memtest86+ on 1.62v):
O.C. Shut Down Free: Enable O.C.S.D.F
CPU VID Control: 1.2000v
CPU VID Special Add Limit: Enabled
CPU VID Special Add: Auto
Vcore Droop Control: Disabled
DRAM Bus Voltage: 1.620v
DRAM PWM Switch Frequency: Nominal
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.34v
VTT PWM Switch Frequency: Nominal
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.90v
IOH/ICH 1.1V Voltage: 1.21v
IOH Analog Voltage: 1.20v
ICH 1.5 Voltage: 1.5v
ICH 1.05V Voltage: 1.15v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
ADDR/CMD VREF Control: Disabled
x DIMM 1/2 ADDR/CMD Bus VREF: 110
x DIMM 3/4 ADDR/CMD Bus VREF: 110
x DIMM 5/6 ADDR/CMD Bus VREF: 110
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Normal