Intel 4.5GHz & 5GHz LinX Stable Club

[zalbard]

http://i301.photobucket.com/albums/nn79/zalbard/LinXClubRed.gif

Do you want to join the club? Then make a post and follow the rules:

You must have at least 2GB of memory installed in the system.
(Update: 31 Jan, 2010) 3GB+ for: Core i5 7xx, Core i7 8xx, Core i7 9xx; 4GB+ for: Core i5 2xxx, Core i7 2xxx.
Screenshot must show a CPU-Z (http://www.cpuid.com/cpuz.php) window with 4.5GHz+ frequency.
(Update: 3 Jan, 2011) Sandy Bridge owners - please only post 5GHz+ submissions. I am keen on preserving the challenge, so I will only add SB to the 5GHz club. Thank you for understanding.
Screenshot must show a LinX (http://www.xtremesystems.org/forums/showthread.php?t=201670) window (max memory settings, click "All" button or pick the last memory size option from the drop down menu, the "All" option is highly recommended) either running the 20th+ loop with no errors, or with 20+ successful passes.
(Update: 14 Dec, 2010) Please make sure that LinX is running / calculating (21st or higher number loop) when you're taking your screenshot (on at least one of your screenshots). You obviously want a CPU-Z window with 4.5GHz+ (5GHz+ for Sandy Bridge) frequency on the same screenshot, as well.
This rule will be enforced for all the new submissions.
Friendly reminder: use all the memory you've got. You don't need more than 1GB of memory for OS and applications. Enable Page File. Do a short LinX run to free up some RAM. I don't want to see 2GB LinX runs with 4GB of RAM installed any more.
Click here to download the latest version of LinX with updated Linpack libraries (http://www.mediafire.com/file/ub0e59335oi2b3z/linx(0.64)_10.3.9.015.zip)
List the motherboard you used.
List the cooling you used (cooling type at least, such as: air / chilled air / water / chilled water / phase).
List your full batch number (highly recommended, but not a must).
Optionally, you could show us your voltages using a program coming with your motherboard, such as EasyTune, E-Leet, TurboV, etc.


(Update: 19 Feb, 2011) Concerning the AVX issue for Sandy Bridge:
According to the tests I've seen, Sandy Bridge at 5GHz+ frequency is able to output 100+ GFlops with AVX enabled with little effort.
To make sure that you have AVX used you need to do the following:

install Windows 7 Service Pack 1;
download and use the latest version of LinX (you can find the link above);
either disable HT or tell LinX to run on 4 threads (for 4 core chips, etc.) if you have HT enabled (current Linpack is poorly optimized for Sandy Bridge [only] chips; telling it to run on the number of threads corresponding to the number of enabled physical cores doesn't just improve performance but also slightly increases stress levels).
(Update: 18 Apr, 2011) Run LinX on all the available threads (4 for HT off, 8 for HT on assuming all 4 cores are enabled) from now on. This is mandatory. It appears that the new Linpack libraries fix this bug.

Using AVX enabled LinX increases stress levels. To separate those using AVX from the rest, I am going to divide 5GHz Club into 2 categories: "Over 100 GFlops" and "Under 100 GFlops". This seems to be the only way of determining whether someone uses AVX or not for sure.
To make sure you get into "Over 100 GFlops" category, make sure that at least one of your loops has 100+ GFlops performance. Obviously, it has to be visible on the screenshot of your submission.


Also, please do not post images wider than 1280 pixels, use thumbnails / links if you have to. I strongly recommend cropping images instead of scaling them (stick to 100% scale). Thank you! :up:
__________________

~ The list ~

5GHz Club <Over 100 GFlops> (Sandy Bridge and others)

Rank | User | Frequency and # cores + threads | vCore | Motherboard | Cooling type | Full Batch #


newhit (http://www.xtremesystems.org/forums/member.php?u=826) | Core i7 2600K [4C 4T] @ 5516.4MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4927643&viewfull=1#post4927643) | 1.620 | Gigabyte P67A-UD7 | Single Stage | 3103B374
lkozarov (http://www.xtremesystems.org/forums/member.php?u=116383) | Core i7 2500K [4C 4T] @ 5500.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4825955&postcount=1823) | 1.584 | ASUS P8P67 Pro | Single Stage | 3048A446
newhit (http://www.xtremesystems.org/forums/member.php?u=826) | Core i7 2600K [4C 4T] @ 5407.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4830448&postcount=1842) | 1.692 | Gigabyte P67A-UD7 | Water | L042B076
TWK_OCZ (http://www.xtremesystems.org/forums/member.php?u=135402) | Core i7 2500K [4C 4T] @ 5341.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4823807&postcount=1811) | 1.608 | ASUS P8P67 Pro | Water | L051B314
Bullu$ (http://www.xtremesystems.org/forums/member.php?75227-Bullu) | Core i7 2600K [4C 8T] @ 5332.8MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4907904&viewfull=1#post4907904) | 1.568 | ASUS Maximus IV Gene-Z | DICE | L039B470
Yoshimura (http://www.xtremesystems.org/forums/member.php?u=95567) | Core i7 2600K [4C 4T] @ 5302.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4760414&postcount=1611) | 1.512 | Gigabyte P67A-UD4 | Water | L042B076
Ace. (http://www.xtremesystems.org/forums/member.php?u=125941) | Core i7 2500K [4C 4T] @ 5300.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4758636&postcount=1601) | 1.568 | ASUS P8P67 WS | Water | L047B217
aznsniper911 (http://www.xtremesystems.org/forums/member.php?u=45964) | Core i7 2600K [4C 8T] @ 5200.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4836171&postcount=1861) | 1.528 | ASUS P8P67 Pro | Water | 3103B307
TWK_OCZ (http://www.xtremesystems.org/forums/member.php?u=135402) | Core i7 2500K [4C 4T] @ 5157.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4811557&postcount=1749) | 1.528 | ASUS P8P67 Pro | Water | L041C119
lkozarov (http://www.xtremesystems.org/forums/member.php?u=116383) | Core i7 2600K [4C 4T] @ 5153.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4773114&postcount=1635) | 1.548 | Gigabyte P67A-UD4 | Single Stage | L045B005
kitfit1 (http://www.xtremesystems.org/forums/member.php?u=20471) | Core i7 990X [6C 6T] @ 5102.7MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4901364&viewfull=1#post4901364) | 1.682 | EVGA Classified E760 | Single Stage | 3044B119
l0ud_sil3nc3 (http://www.xtremesystems.org/forums/member.php?122713-l0ud_sil3nc3) | Core i7 2500K [4C 4T] @ 5100.6MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4894670&viewfull=1#post4894670) | 1.440 | ASUS Maximus IV Extreme | Water | 3102C246
st0ned (http://www.xtremesystems.org/forums/member.php?u=60014) | Core i7 2600K [4C 4T] @ 5100.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4804350&postcount=1734) | 1.416 | ASUS Maximus IV Extreme | Water | L042B076
dragonhunter (http://www.xtremesystems.org/forums/member.php?u=9442) | Core i7 2600K [4C 4T] @ 5100.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4770975&postcount=1629) | 1.488 | ASUS P8P67 Deluxe | Water | L042B243
beast200 (http://www.xtremesystems.org/forums/member.php?u=72311) | Core i7 2500K [4C 4T] @ 5088.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4771906&postcount=1631) | 1.456 | Asrock P67 Extreme 6 | Water | L046B582
AUGieDogie (http://www.xtremesystems.org/forums/member.php?u=7023) | Core i7 2600K [4C 4T] @ 5076.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4760444&postcount=1612) | 1.456 | ASUS P8P67 Evo | Air | L041C106
crossg (http://www.xtremesystems.org/forums/member.php?u=51762) | Core i7 2600K [4C 4T] @ 5022.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4755133&postcount=1593) | 1.416 | ASUS P8P67 Deluxe | Air | L038A660
Mysterfix (http://www.xtremesystems.org/forums/member.php?u=14009) | Core i7 2500K [4C 4T] @ 5007.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4780441&postcount=1650) | 1.440 | Asrock P67 Extreme 4 | Water | L042B291
Oggodatank (http://www.xtremesystems.org/forums/member.php?148186-Oggodatank) | Core i7 2600K [4C 8T] @ 5006.5MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4916407&viewfull=1#post4916407) | 1.568 | Asrock P67 Extreme 4 | Water | 3049A287
Dumo (http://www.xtremesystems.org/forums/member.php?10827-Dumo) | Core i7 2600K [4C 8T] @ 5004.8MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4889233&viewfull=1#post4889233) | 1.368 | Gigabyte P67A-UD7 | Single Stage | 3103B306
Cy4n1d3 (http://www.xtremesystems.org/forums/member.php?u=68177) | Core i7 2500K [4C 4T] @ 5004.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4752503&postcount=1573) | 1.424 | Asrock P67 Extreme 4 | Air | L041B789
needforspeed (http://www.xtremesystems.org/forums/member.php?u=20394) | Core i7 990X [6C 6T] @ 5002.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4816722&postcount=1767) | 1.640 | ASUS Rampage III Extreme | Water | 3045B094
C-N (http://www.xtremesystems.org/forums/member.php?u=53004) | Core i7 2500K [4C 4T] @ 5001.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4757319&postcount=1598) | 1.368 | Gigabyte P67A-UD5 | Water | L050A864
scum (http://www.xtremesystems.org/forums/member.php?81517-scum) | Core i7 2600K [4C 8T] @ 5000.8MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4912066&viewfull=1#post4912066) | 1.464 | ASUS Maximus IV Extreme-Z | Air | 3105C253
vafan13 (http://www.xtremesystems.org/forums/member.php?u=45996) | Core i7 2600K [4C 4T] @ 5000.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4824991&postcount=1815) | 1.360 | Asrock P67 Extreme 6 | Air | 3101A112
The Nemesis (http://www.xtremesystems.org/forums/member.php?22686-The-Nemesis) | Core i7 2600K [4C 8T] @ 5000.5MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4902354&viewfull=1#post4902354) | 1.512 | ASUS Maximus IV Extreme | Water | 3103B306
Gunslinger (http://www.xtremesystems.org/forums/member.php?u=44583) | Core i7 2600K [4C 8T] @ 5000.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4875934&postcount=1901) | 1.480 | ASUS Maximus IV Extreme | Water | 3103B373
jeanjean15 (http://www.xtremesystems.org/forums/member.php?u=65100) | Core i7 2600K [4C 8T] @ 5000.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4794800&postcount=1714) | 1.480 | ASUS P8P67 Evo | Water | L039B461
l0ud_sil3nc3 (http://www.xtremesystems.org/forums/member.php?u=122713) | Core i7 2600K [4C 8T] @ 5000.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4764698&postcount=1619) | 1.488 | ASUS P8P67 Pro | Water | L042B208
deachus (http://www.xtremesystems.org/forums/member.php?u=23427) | Core i7 2600K [4C 8T] @ 4999.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4802911&postcount=1724) | 1.456 | ASUS Maximus IV Extreme | Water | L042B243

__________________

5GHz Club <Under 100 GFlops> (Sandy Bridge and others)

Rank | User | Frequency and # cores + threads | vCore | Motherboard | Cooling type | Full Batch #


LASeR10 (http://www.xtremesystems.org/forums/member.php?u=122887) | Core i5 2500K [4C 4T] @ 5508.2MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4920685&viewfull=1#post4920685) | 1.600 | ASUS Maximus IV Gene-Z | Single Stage | L051B314
:banana::banana::banana::banana:_43 (http://www.xtremesystems.org/forums/member.php?u=127355) | Core i7 2500K [4C 4T] @ 5500.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4830936&postcount=1845) | 1.672 | ASUS P8P67 Pro | Water | L051B314
TWK_OCZ (http://www.xtremesystems.org/forums/member.php?135402-TWK_OCZ) | Core i7 2600K [4C 8T] @ 5304.4MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4907825&viewfull=1#post4907825) | 1.584 | ASUS P8P67 Pro | Water | L108B128
Ace. (http://www.xtremesystems.org/forums/member.php?u=125941) | Core i7 2500K [4C 4T] @ 5300.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4737075&postcount=1534) | 1.520 | ASUS P8P67 WS | Water | L050A863
SBB (http://www.xtremesystems.org/forums/member.php?u=101878) | Core i7 2600K [4C 4T] @ 5254.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4703255&postcount=1421) | 1.512 | ASUS P8P67 Pro | Water | L040B165
C-N (http://www.xtremesystems.org/forums/member.php?u=53004) | Core i7 2600K [4C 8T] @ 5202.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4717883&postcount=1475) | 1.512 | Gigabyte P67A-UD5 | Air | L040B307
SteveRo (http://www.xtremesystems.org/forums/member.php?u=103330) | Core i5 655K [2C 2T] @ 5200.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4536219&postcount=907) | 1.776 | Gigabyte H55N-USB3 | Cascade | L008B538
SteveRo (http://www.xtremesystems.org/forums/member.php?u=103330) | Core i7 980X [6C 6T] @ 5200.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4492258&postcount=782) | 1.728 | Gigabyte X58A-UD7 | Cascade | 3003B287
Sauron_Vie (http://www.xtremesystems.org/forums/member.php?u=11754) | Core i7 2600K [4C 8T] @ 5200.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4784447&postcount=1663) | 1.568 | ASUS P8P67 Pro | Water | L039B470
:banana::banana::banana::banana:_43 (http://www.xtremesystems.org/forums/member.php?u=127355) | Core i7 2600K [4C 8T] @ 5151.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4745614&postcount=1551) | 1.596 | Biostar TP67XE | Water | L042A969
Daddyjaxx (http://www.xtremesystems.org/forums/member.php?u=26802) | Core i7 2600K [4C 8T] @ 5126.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4729716&postcount=1522) | 1.504 | ASUS P8P67 Deluxe | Water | L042B208
Friday~13rd (http://www.xtremesystems.org/forums/member.php?u=26305) | Core i7 2500K [4C 4T] @ 5104.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4778510&postcount=1645) | 1.500 | Biostar TP67XE | Air | L041C119
miahallen (http://www.xtremesystems.org/forums/member.php?u=60377) | Core i7 2600K (ES) [4C 8T] @ 5102.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4690142&postcount=1387) | 1.448 | ASUS Maximus IV Extreme | Air | ES
miahallen (http://www.xtremesystems.org/forums/member.php?u=60377) | Core i5 670 [2C 2T] @ 5101.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4588880&postcount=983) | 1.536 | Gigabyte H55N-USB3 | Water | L935B898
Jor3lBR (http://www.xtremesystems.org/forums/member.php?u=55036) | C2D E8600 [2C] @ 5100.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4171815&postcount=86) | 1.616 | ASUS Rampage Extreme | Phase | Q820A727
coolhandluke41 (http://www.xtremesystems.org/forums/member.php?u=127864) | Core i7 2600K [4C 8T] @ 5100.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4745173&postcount=1547) | 1.480 | ASUS P8P67 Pro | Water | L040B671
owikh84 (http://www.xtremesystems.org/forums/member.php?u=104044) | Core i7 2600K [4C 8T] @ 5100.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4804253&postcount=1732) | 1.536 | ASUS Maximus IV Extreme | Water | L048A937
donmarkoni (http://www.xtremesystems.org/forums/member.php?u=102254) | Core i7 2600K [4C 8T] @ 5100.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4725984&postcount=1508) | 1.488 | ASUS P8P67 Pro | Chilled Air | L040B694
skeyo (http://www.xtremesystems.org/forums/member.php?u=111467) | Core i7 2600K [4C 8T] @ 5088.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4713128&postcount=1451) | 1.428 | Gigabyte P67A-UD7 | Water | L038A660
miahallen (http://www.xtremesystems.org/forums/member.php?u=60377) | Core i5 670 [2C 4T] @ 5050.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4588880&postcount=983) | 1.536 | Gigabyte H55N-USB3 | Water | L935B898
little_scrapper (http://www.xtremesystems.org/forums/member.php?u=50175) | Core i7 2500K [4C 4T] @ 5047.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4828741&postcount=1831) | 1.408 | ASUS P8P67 WS | Air | 3101A127
twirlywhirly555 (http://www.xtremesystems.org/forums/member.php?u=129886) | Core i3 560 [2C 4T] @ 5025.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4767181&postcount=1621) | 1.520 | Gigabyte H55N-USB3 | Chilled Water | L013B634
x-built-Stan (http://www.xtremesystems.org/forums/member.php?u=75291) | Core i7 980X [6C 12T] @ 5022.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4726109&postcount=1509) | 1.554 | ASUS Rampage III Extreme | Single Stage | 3032A343
kazukun (http://www.xtremesystems.org/forums/member.php?102660-kazukun) | Core i7 2600K [4C 8T] @ 5014.8MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4900386&viewfull=1#post4900386) | 1.608 | Gigabyte Z68X-UD7 | Water | L102B549
nijel (http://www.xtremesystems.org/forums/member.php?u=73518) | Core i7 2600K [4C 8T] @ 5011.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4732726&postcount=1527) | 1.404 | Gigabyte P67A-UD7 | Air | L041C108
PolRoger (http://www.xtremesystems.org/forums/member.php?u=94709) | Core i7 2500K [4C 4T] @ 5006.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4733724&postcount=1528) | 1.336 | Asrock P67 Professional | Air | L041C123
kitfit1 (http://www.xtremesystems.org/forums/member.php?u=20471) | Core i7 975 [4C 8T] @ 5004.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4450618&postcount=671) | 1.552 | EVGA Classified E760 | Single Stage | -
PolRoger (http://www.xtremesystems.org/forums/member.php?u=94709) | Core i7 2600K [4C 8T] @ 5002.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4741048&postcount=1539) | 1.416 | Biostar TP67XE | Air | L041C106
the_real_7 (http://www.xtremesystems.org/forums/member.php?u=60903) | Core i7 2600K [4C 8T] @ 5001.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4720732&postcount=1484) | 1.391 | Gigabyte P67A-UD7 | Water | L040B705
tnc99 (http://www.xtremesystems.org/forums/member.php?u=122424) | Core i7 2600K [4C 8T] @ 5001.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4769044&postcount=1627) | 1.452 | Gigabyte P67A-UD7 | Water | L041B213
C-N (http://www.xtremesystems.org/forums/member.php?u=53004) | Core i7 2500K [4C 4T] @ 5001.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4693530&postcount=1409) | 1.445 | Gigabyte P67A-UD5 | Air | L041B517
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i5 660 [2C 2T] @ 5000.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4439602&postcount=640) | 1.552 | Gigabyte P55A-UD6 | Water | L935B896
KURTZ (http://www.xtremesystems.org/forums/member.php?u=29667) | Core i7 2600K (ES) [4C 8T] @ 5000.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4709195&postcount=1440) | 1.416 | ASUS P8P67 | Water | ES
The Nemesis (http://www.xtremesystems.org/forums/member.php?u=22686) | Core i7 2600K [4C 8T] @ 5000.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4737637&postcount=1537) | 1.520 | Maximus IV Extreme | Water | L042B243
famich (http://www.xtremesystems.org/forums/member.php?u=25540) | Core i7 2600K [4C 8T] @ 5000.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4759690&postcount=1607) | 1.448 | ASUS P8P67 Deluxe | Water | L041B213
SimpleTECH (http://www.xtremesystems.org/forums/member.php?u=84827) | Core i7 2600k [4C 8T] @ 5000.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4753500&postcount=1580) | 1.440 | Asus P8P67 Pro | Water | L040B208

__________________

Core i7 (Gulftown & Westmere-EP, 32nm)

Rank | User | Frequency and # cores + threads | vCore | Motherboard | Cooling type | Full Batch #


newhit (http://www.xtremesystems.org/forums/member.php?u=826) | Core i7 980X [6C 6T] @ 4918.0MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4900910&viewfull=1#post4900910) | 1.623 | EVGA Classified E760 | Phase | 3003B287
donmarkoni (http://www.xtremesystems.org/forums/member.php?u=102254) | Core i7 990X [6C 6T] @ 4903.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4833027&postcount=1849) | 1.554 | ASUS Rampage III Extreme | Water | 3026A486
kone (http://www.xtremesystems.org/forums/member.php?u=18300) | Xeon DP (ES) [4C 8T] @ 4830.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4215687&postcount=119) | 1.536 | Gigabyte X58A-UD7 | Water | ES
crossg (http://www.xtremesystems.org/forums/member.php?u=51762) | Core i7 990X [6C 6T] @ 4828.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4829400&postcount=1840) | 1.456 | ASUS Rampage III Formula | Air | 3045A752
wiener007 (http://www.xtremesystems.org/forums/member.php?u=110079) | Core i7 970 [6C 12T] @ 4812.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4604989&postcount=1034) | 1.515 | ASUS Rampage III Extreme | Water | 3009F989
zinsco (http://www.xtremesystems.org/forums/member.php?u=123409) | Core i7 980X [6C 6T] @ 4812.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4828226&postcount=1828) | 1.594 | ASUS Rampage III Extreme | Water | 3005F801
:banana::banana::banana::banana:_43 (http://www.xtremesystems.org/forums/member.php?u=127355) | Core i7 980X [6C 12T] @ 4770.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4744327&postcount=1545) | 1.594 | ASUS Rampage III Extreme | Water | 3044B034
crossg (http://www.xtremesystems.org/forums/member.php?u=51762) | Core i7 980X [6C 6T] @ 4752.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4810096&postcount=1747) | 1.448 | ASUS Rampage III Formula | Air | 3045A708
The Nemesis (http://www.xtremesystems.org/forums/member.php?22686-The-Nemesis) | Core i7 990X [6C 12T] @ 4747.2MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4908781&viewfull=1#post4908781) | 1.462 | ASUS Rampage III Extreme Black Edition | Water | 3101A239
peanutskeeter (http://www.xtremesystems.org/forums/member.php?u=127078) | Core i7 980X [6C 12T] @ 4739.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4537401&postcount=914) | 1.587 | ASUS Rampage III Extreme | Phase | -
wibujo (http://www.xtremesystems.org/forums/member.php?u=125029) | Core i7 980X [6C 6T] @ 4727.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4754020&postcount=1587) | 1.552 | Gigabyte X58A-UD9 | Water | 3020A431
BobyTT (http://www.xtremesystems.org/forums/member.php?u=8039) | Core i7 980X [6C 12T] @ 4713.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4366918&postcount=440) | 1.494 | EVGA Classified E759 | Water | 3003B320
skuldarin (http://www.xtremesystems.org/forums/member.php?u=126159) | Core i7 980X [6C 6T] @ 4710.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4824435&postcount=1813) | 1.556 | ASUS Rampage III Extreme | Water | 3013A540
Mydog (http://www.xtremesystems.org/forums/member.php?u=118138) | Core i7 980X [6C 12T] @ 4710.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4312260&postcount=327) | 1.508 | ASUS Rampage II Extreme | Water | -
monteboy (http://www.xtremesystems.org/forums/member.php?u=24429) | Core i7 980X [6C 6T] @ 4703.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4571479&postcount=949) | 1.472 | Gigabyte X58A-UD9 | Single Stage | 3013Bxxx
donmarkoni (http://www.xtremesystems.org/forums/member.php?u=102254) | Core i7 980X [6C 6T] @ 4703.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4654218&postcount=1191) | 1.475 | ASUS Rampage III Extreme | Chilled Water | 3013A472
Gautam (http://www.xtremesystems.org/forums/member.php?u=5546) | Core i7 980X [6C 12T] @ 4700.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4447742&postcount=661) | 1.456 | ASUS P6T Deluxe | Water | 3003B466
dr_dx (http://www.xtremesystems.org/forums/member.php?u=109991) | Xeon W3680 [6C 6T] @ 4650.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4597210&postcount=1003) | 1.520 | Gigiabyte X58A-UD7 rev2 | Chilled Water | 3013A739
wibujo (http://www.xtremesystems.org/forums/member.php?u=125029) | Core i7 980X [6C 6T] @ 4640.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4705492&postcount=1429) | 1.472 | Gigiabyte X58A-UD9 | Water | 3020A431
Leeghoofd (http://www.xtremesystems.org/forums/member.php?u=35152) | Core i7 990X [6C 6T] @ 4636.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4817590&postcount=1773) | 1.440 | ASUS Rampage II Formula | Water | 3045A596
XeL_NaGa (http://www.xtremesystems.org/forums/member.php?u=66014) | Core i7 980X [6C 12T] @ 4636.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4783309&postcount=1653) | 1.495 | ASUS Rampage II Extreme | Water | 3020A431
LennyRhys (http://www.xtremesystems.org/forums/member.php?66579-LennyRhys) | Core i7 970 [6C 6T] @ 4625.1MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4901193&viewfull=1#post4901193) | 1.440 | ASUS P6X58D-E | Air | 3012B113
The Nemesis (http://www.xtremesystems.org/forums/member.php?u=22686) | Core i7 980X [6C 12T] @ 4611.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4535994&postcount=906) | 1.458 | EVGA Classified E760 | Water | 3006A442
zoson (http://www.xtremesystems.org/forums/member.php?75240-zoson) | Core i7 970 [6C 6T] @ 4611.0MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4894636&viewfull=1#post4894636) | 1.521 | ASUS Rampage III Extreme | Water | 3018A860
Alka Holic (http://www.xtremesystems.org/forums/member.php?u=128794) | Core i7 980X [6C 12T] @ 4610.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4640414&postcount=1079) | 1.349 | ASUS Rampage III Extreme | Water | 3035B799
ac001 (http://www.xtremesystems.org/forums/member.php?u=135436) | Core i7 990X [6C 6T] @ 4605.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4823642&postcount=1809) | 1.468 | ASUS Rampage III Black Edition | Water | -
CobraXP (http://www.xtremesystems.org/forums/member.php?u=108838) | Core i7 990X (ES) [6C 12T] @ 4604.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4655340&postcount=1214) | 1.440 | Foxconn BloodRage | Water | ES
kill_a_wat (http://www.xtremesystems.org/forums/member.php?u=103989) | Core i7 980X [6C 12T] @ 4603.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4451818&postcount=675) | 1.448 | ASUS Rampage III Extreme | Water | 3003B242
mitmot (http://www.xtremesystems.org/forums/member.php?u=122841) | Core i7 980X [6C 12T] @ 4600.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4326080&postcount=381) | 1.472 | ASUS P6T Deluxe V2 | Water | 3003A957
med1kl (http://www.xtremesystems.org/forums/member.php?u=123764) | Core i7 980X [6C 6T] @ 4600.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4341358&postcount=392) | 1.496 | ASUS P6T Deluxe V2 | Water | -
Krautmaster (http://www.xtremesystems.org/forums/member.php?u=101505) | Core i7 990X [6C 12T] @ 4600.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4605496&postcount=1035) | 1.440 | DFI LP UT X58-T3E8H | Water | -
Hornetcup (http://www.xtremesystems.org/forums/member.php?u=26763) | Core i7 980X [6C 12T] @ 4567.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4519801&postcount=868) | 1.468 | ASUS Rampage III Extreme | Water | 3013A531
justin.kerr (http://www.xtremesystems.org/forums/member.php?u=108791) | Core i7 980X [6C 12T] @ 4565.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4362428&postcount=423) | 1.446 | EVGA Classified E760 | Water | -
kazukun (http://www.xtremesystems.org/forums/member.php?u=102660) | Core i7 980X [6C 12T] @ 4563.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4354962&postcount=408) | 1.435 | EVGA Classified E760 | Water | 3003B396
Shadow0001 (http://www.xtremesystems.org/forums/member.php?u=73815) | Core i7 980X [6C 12T] @ 4560.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4719417&postcount=1480) | 1.504 | Gigiabyte X58-UD5 | Water | -
Salamndar (http://www.xtremesystems.org/forums/member.php?u=66871) | Core i7 980X [6C 12T] @ 4546.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4694651&postcount=1414) | 1.446 | EVGA Classified E760 | Water | 3013A525
crossg (http://www.xtremesystems.org/forums/member.php?u=51762) | Core i7 980X [6C 12T] @ 4537.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4708024&postcount=1431) | 1.448 | ASUS Rampage III Formula | Air | 3036C076
thobel (http://www.xtremesystems.org/forums/member.php?u=122478) | Core i7 980X [6C 12T] @ 4536.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4722971&postcount=1500) | 1.475 | ASUS Rampage III Extreme | Water | -
xpatar (http://www.xtremesystems.org/forums/member.php?u=26439) | Core i7 980X [6C 12T] @ 4530.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4477076&postcount=723) | 1.408 | Gigabyte EX58-UD4P | Water | 3003B320
McDown (http://www.xtremesystems.org/forums/member.php?u=110834) | Core i7 990X [6C 12T] @ 4525.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4826172&postcount=1826) | 1.389 | ASUS Rampage III Extreme | Water | 3045A643
mbreslin (http://www.xtremesystems.org/forums/member.php?u=121717) | Core i7 980X [6C 12T] @ 4521.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4347417&postcount=397) | 1.424 | Gigabyte X58A-UD7 | Water | 3003B396
tomb18 (http://www.xtremesystems.org/forums/member.php?u=39729) | Core i7 980X [6C 12T] @ 4520.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4472290&postcount=700) | 1.435 | ASUS Rampage III Extreme | Water | 3003B288
JoeChuo (http://www.xtremesystems.org/forums/member.php?u=111746) | Xeon W3680 [6C 6T] @ 4518.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4470195&postcount=697) | 1.435 | EVGA Classified E759 | Water | -
Lu523 (http://www.xtremesystems.org/forums/member.php?u=250574) | Core i7 980X [6C 12T] @ 4515.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4754131&postcount=1588) | 1.423 | EVGA Classified E760 | Water | 3020A437
owikh84 (http://www.xtremesystems.org/forums/member.php?u=104044) | Core i7 980X [6C 6T] @ 4514.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4652753&postcount=1163) | 1.399 | EVGA Classified E760 | Water | 3041A489
zoson (http://www.xtremesystems.org/forums/member.php?u=75240) | Core i7 970 [6C 6T] @ 4512.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4818103&postcount=1780) | 1.515 | ASUS Rampage III Extreme | Water | 3016B246
splmann (http://www.xtremesystems.org/forums/member.php?u=12085) | Core i7 980X [6C 12T] @4512.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4538979&postcount=921) | 1.424 | ASUS Rampage III Extreme | Water | -
Sanousie (http://www.xtremesystems.org/forums/member.php?5830-Sanousie) | Core i7 970 [6C 6T] @ 4512.5MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4903520&viewfull=1#post4903520) | 1.520 | ASUS Rampage III Extreme | Water | -
Olly_K (http://www.xtremesystems.org/forums/member.php?u=58034) | Core i7 980X [6C 12T] @4511.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4479720&postcount=729) | 1.423 | EVGA Classified E762 | Water | 3003B396
Shiranui Gen-An (http://www.xtremesystems.org/forums/member.php?u=84784) | Core i7 980X [6C 6T] @4511.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4644631&postcount=1123) | 1.435 | EVGA Classified E762 | Water | 3005F803T
tompc3 (http://www.xtremesystems.org/forums/member.php?u=24383) | Core i7 980X [6C 6T] @ 4510.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4643545&postcount=1116) | 1.423 | EVGA Classified E770 | Air | 3032A340
RRunner (http://www.xtremesystems.org/forums/member.php?u=85013) | Core i7 980X [6C 12T] @ 4510.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4746753&postcount=1565) | 1.376 | Gigabyte X58A-UD7 | Air | 3040B404
tool_462 (http://www.xtremesystems.org/forums/member.php?u=78979) | Xeon DP (ES) [4C 8T] @ 4510.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4287590&postcount=258) | 1.376 | Gigabyte EX58-UD5 | Water | ES
sniper_sung (http://www.xtremesystems.org/forums/member.php?u=117564) | Core i7 980X [6C 6T] @ 4509.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4476481&postcount=718) | 1.388 | EVGA Classified E760 | Air | 3013A524
psygnosi (http://www.xtremesystems.org/forums/member.php?u=101471) | Core i7 980X [6C 12T] @ 4504.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4396601&postcount=498) | 1.442 | ASUS Rampage II Extreme | Water | 3003B475
CryptiK (http://www.xtremesystems.org/forums/member.php?u=92091) | Core i7 990X [6C 12T] @ 4504.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4812716&postcount=1759) | 1.336 | ASUS Rampage III Extreme | Water | -
radaja (http://www.xtremesystems.org/forums/member.php?u=87360) | Core i7 970 [6C 12T] @ 4504.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4754772&postcount=1589) | 1.364 | EVGA Classified E760 | Water | 3012B129
cq842000 (http://www.xtremesystems.org/forums/member.php?u=126357) | Core i7 980X [6C 12T] @ 4504.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4564865&postcount=940) | 1.517 | EVGA Classified E762 | Water | 3020A477
Decky (http://www.xtremesystems.org/forums/member.php?u=129652) | Core i7 970 [6C 12T] @ 4500.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4725689&postcount=1507) | 1.496 | ASUS P6X58D-E | Chilled Air | 3014B194
_AntLionBR_ (http://www.xtremesystems.org/forums/member.php?u=103252) | Core i7 (ES) [6C 12T] @ 4500.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4648925&postcount=1133) | 1.392 | Gigabyte X58A-UD7 | Air | ES
initialised (http://www.xtremesystems.org/forums/member.php?u=58598) | Core i7 (ES) [6C 12T] @ 4500.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4228995&postcount=139) | 1.592 | ASUS P6T Deluxe V2 | Water | ES
xarot (http://www.xtremesystems.org/forums/member.php?u=101408) | Core i7 980X [6C 6T] @ 4500.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4798854&postcount=1715) | 1.368 | ASUS P6T6 WS | Air | ES
Leopold Butters (http://www.xtremesystems.org/forums/member.php?u=119084) | Core i7 970 [6C 12T] @ 4500.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4683087&postcount=1367) | 1.432 | ASUS P6X58D Deluxe | Water | 301B122
RRunner (http://www.xtremesystems.org/forums/member.php?u=85013) | Core i7 980X [6C 12T] @ 4500.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4791865&postcount=1694) | 1.312 | Gigabyte X58A-UD7 | Water | 3041B300
RRunner (http://www.xtremesystems.org/forums/member.php?u=85013) | Core i7 980X [6C 12T] @ 4500.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4501545&postcount=830) | 1.392 | Gigabyte X58A-UD7 | Air | 3003B288
angelreaper (http://www.xtremesystems.org/forums/member.php?u=48684) | Core i7 970 [6C 12T] @ 4500.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4597930&postcount=1008) | 1.376 | Gigabyte X58A-UD7 | Air | 3013A652
fallwind (http://www.xtremesystems.org/forums/member.php?u=54799) | Core i7 980X [6C 6T] @ 4500.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4354800&postcount=407) | 1.376 | Gigabyte EX58-DS4 | Water | 3003B331
00011011 (http://www.xtremesystems.org/forums/member.php?u=123728) | Core i7 980X [6C 6T] @ 4500.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4393912&postcount=491) | 1.408 | ASUS P6X58D Premium | Water | 3003B288

__________________

Core i5 & i7 (Lynnfield, Bloomfield & Gainestown, 45nm)

Rank | User | Frequency and # cores, threads | vCore | Motherboard | Cooling type | Full Batch #


zsamz_ (http://www.xtremesystems.org/forums/member.php?u=52822) | Core i7 920 [4C 4T] @ 4985.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4745531&postcount=1550) | 1.529 | EVGA Classified E760 | Phase | 3849B018
lkozarov (http://www.xtremesystems.org/forums/member.php?u=116383) | Core i7 920 [4C 4T] @ 4855.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4677388&postcount=1348) | 1.360 | Foxconn Bloodrage GTI | Single Stage | 3918A495
Sniper (http://www.xtremesystems.org/forums/member.php?u=2429) | Xeon W3520 [4C 4T] @ 4851.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4654020&postcount=1183) | 1.488 | Gigabyte X58-Extreme | Chilled Water | -
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i7 920 [4C 4T] @ 4828.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4655320&postcount=1213) | 1.600 | MSI Big Bang-XPower | Chilled Water | 3937B785
Anth Seebel (http://www.xtremesystems.org/forums/member.php?u=7493) | Xeon W3520 [4C 4T] @ 4825.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4429796&postcount=609) | 1.440 | ASUS P6T Deluxe V2 | Single Stage | 3845A935
PiLsY (http://www.xtremesystems.org/forums/member.php?u=105) | Core i7 950 [4C 4T] @ 4811.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4465962&postcount=694) | 1.552 | Foxconn Bloodrage | Water | 3910A470
lowfat (http://www.xtremesystems.org/forums/member.php?u=21694) | Core i7 920 [4C 8T] @ 4811.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4171153&postcount=82) | 1.312 | EVGA Classified E760 | Single Stage | -
zsamz_ (http://www.xtremesystems.org/forums/member.php?u=52822) | Core i7 920 [4C 4T] @ 4777.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4381580&postcount=461) | 1.520 | ASUS Rampage II Extreme | Water | 3849B018
Sniper (http://www.xtremesystems.org/forums/member.php?u=2429) | Core i7 920 [4C 4T] @ 4767.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4299347&postcount=290) | 1.440 | Gigabyte EX58-Extreme | Water | 3848A352
radaja (http://www.xtremesystems.org/forums/member.php?u=87360) | Core i7 920 [4C 4T] @ 4755.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4689971&postcount=1385) | 1.470 | EVGA Classified E760 | Water | 3849B018
newhit (http://www.xtremesystems.org/forums/member.php?u=826) | Core i7 950 [4C 4T] @ 4738.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4332170&postcount=386) | 1.520 | Gigabyte X58A-UD7 | Water | -
Romir (http://www.xtremesystems.org/forums/member.php?u=10804) | Core i7 920 [4C 4T] @ 4734.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4319329&postcount=361) | 1.505 | EVGA Classified E760 | Chilled Water | 3849B018
PiLsY (http://www.xtremesystems.org/forums/member.php?u=105) | Core i5 750 [4C 4T] @ 4725.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4655081&postcount=1203) | 1.536 | Gigabyte P55-UD5 | Chilled Water | -
justin.kerr (http://www.xtremesystems.org/forums/member.php?u=108791) | Core i7 920 [4C 4T] @ 4713.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4142516&postcount=59) | 1.458 | EVGA Classified E760 | Water | -
acebmxer (http://www.xtremesystems.org/forums/member.php?u=111532) | Core i7 920 [4C 4T] @ 4704.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4501844&postcount=831) | 1.488 | Gigabyte EX58-UD5 | Water | 3927A440
:banana::banana::banana::banana:_43 (http://www.xtremesystems.org/forums/member.php?u=127355) | Core i7 930 [4C 8T] @ 4693.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4686928&postcount=1377) | 1.606 | ASUS Rampage III Extreme | Water | 3005F577
needforspeed (http://www.xtremesystems.org/forums/member.php?u=20394) | Xeon W3565 [4C 4T] @ 4681.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4548485&postcount=930) | 1.475 | ASUS Rampage III Extreme | Water |3847A987
Enzo78 (http://www.xtremesystems.org/forums/member.php?u=121849) | Core i7 920 [4C 4T] @ 4662.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4370112&postcount=451) | 1.392 | Gigabyte EX58-Extreme | Water | 3912A859
nickless (http://www.xtremesystems.org/forums/member.php?u=54214) | Xeon W3520 [4C 4T] @ 4651.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4644707&postcount=1124) | 1.422 | ASUS Rampage III Extreme | Water | 3845A935
dejanh (http://www.xtremesystems.org/forums/member.php?u=83749) | Core i7 920 [4C 8T] @ 4650.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4277470&postcount=225) | 1.611 | EVGA Classified E759 | Water | 3849A832
Sniper (http://www.xtremesystems.org/forums/member.php?u=2429) | Core i7 920 [4C 8T] @ 4641.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4116171&postcount=16) | 1.408 | Gigabyte EX58-Extreme | Water | 3848A352
famish99 (http://www.xtremesystems.org/forums/member.php?u=111453) | Core i7 920 [4C 4T] @ 4630.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4400518&postcount=511) | 1.512 | ASUS Rampage II Gene | Water | 3849A866
johnksss (http://www.xtremesystems.org/forums/member.php?u=108025) | Core i7 920 [4C 8T] @ 4629.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4277273&postcount=214) | 1.599 | EVGA Classified E760 | Water | -
antiacid (http://www.xtremesystems.org/forums/member.php?u=108285) | Core i7 920 [4C 8T] @ 4620.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4406950&postcount=535) | 1.408 | Gigabyte X58A-UD7 | Water | 3849B018
LASeR10 (http://www.xtremesystems.org/forums/member.php?u=122887) | Core i7 930 [4C 4T] @ 4620.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4492627&postcount=785) | 1.568 | Gigabyte X58A-UD7 | Water | -
mattgmann (http://www.xtremesystems.org/forums/member.php?u=103403) | Core i7 920 [4C 8T] @ 4620.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4691454&postcount=1402) | 1.392 | Gigabyte EX58-UD5 | Water | 3849B018
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i7 930 [4C 4T] @ 4620.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4485723&postcount=767) | 1.440 | Gigabyte X58A-UD7 | Water | 3004B176
SimpleTECH (http://www.xtremesystems.org/forums/member.php?u=84827) | Xeon W3520 [4C 4T] @ 4620.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4646767&postcount=1129) | 1.328 | Gigabyte X58A-UD5 | Water | 3845A935
owikh84 (http://www.xtremesystems.org/forums/member.php?u=104044) | Core i7 920 [4C 4T] @ 4608.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4456179&postcount=690) | 1.423 | EVGA Classified E760 | Water | 3914A113
shadewither (http://www.xtremesystems.org/forums/member.php?u=17690) | Core i7 920 [4C 8T] @ 4606.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4435484&postcount=622) | 1.384 | ASUS Rampage III Extreme | Water | 3912A835
playground (http://www.xtremesystems.org/forums/member.php?u=71631) | Core i7 920 [4C 4T] @ 4606.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4484747&postcount=755) | 1.568 | ASUS Rampage III Extreme | Water | 3922A423
zasadek (http://www.xtremesystems.org/forums/member.php?u=101190) | Core i7 930 [4C 4T] @ 4606.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4535925&postcount=905) | 1.455 | ASUS Rampage III Extreme | Water | -
rge (http://www.xtremesystems.org/forums/member.php?u=54910) | Core i7 950 [4C 8T] @ 4600.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4122674&postcount=42) | 1.456 | Gigabyte EX58-Extreme | Water | 3847B005
Bullu$ (http://www.xtremesystems.org/forums/member.php?u=75227) | Xeon W3540 [4C 8T] @ 4600.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4569947&postcount=946) | 1.552 | Gigabyte X58A-UD7 v2 | Water | 3846B017
]siNNer[ (http://www.xtremesystems.org/forums/member.php?u=22217) | Core i7 920 [4C 4T] @ 4598.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4676643&postcount=1344) | 1.472 | Gigabyte X58A-UD3R | Air | 3945A927
johnnymossville (http://www.xtremesystems.org/forums/member.php?u=122330) | Core i7 930 [4C 4T] @ 4573.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4398727&postcount=506) | 1.488 | ASUS P6X58D Premium | Water | -
uranium (http://www.xtremesystems.org/forums/member.php?u=7805) | Core i7 920 [4C 4T] @ 4566.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4145408&postcount=67) | 1.458 | EVGA Classified E760 | Water | -
Major (http://www.xtremesystems.org/forums/member.php?u=2575) | Core i7 920 [4C 8T] @ 4557.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4398924&postcount=510) | 1.472 | Gigabyte X58A-UD5 | Water | -
needforspeed (http://www.xtremesystems.org/forums/member.php?u=20394) | Core i7 920 [4C 4T] @ 4552.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4358478&postcount=411) | 1.528 | ASUS P6X58D | Water | 3938B023
SteveRo (http://www.xtremesystems.org/forums/member.php?u=103330) | Xeon W3520 [4C 4T] @ 4535.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4252675&postcount=183) | 1.584 | Gigabyte X58A-UD7 | Water | -
iTravis (http://www.xtremesystems.org/forums/member.php?u=65197) | Core i7 920 [4C 4T] @ 4524.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4301717&postcount=301) | 1.541 | EVGA Classified E760 | Water | 3912B168
kimandsally (http://www.xtremesystems.org/forums/member.php?u=12034) | Core i7 920 [4C 4T] @ 4524.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4152655&postcount=75) | 1.388 | EVGA Classified E760 | Water | -
cky2k6 (http://www.xtremesystems.org/forums/member.php?u=24659) | Core i7 920 [4C 8T] @ 4524.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4719069&postcount=1478) | 1.458 | EVGA Classified E760 | Water | 3946A169
trn (http://www.xtremesystems.org/forums/member.php?u=61340) | Core i7 920 [4C 8T] @ 4524.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4192934&postcount=105) | 1.482 | EVGA Classified E760 | Chilled Water | -
cstkl1 (http://www.xtremesystems.org/forums/member.php?u=43541) | Core i7 920 [4C 4T] @ 4524.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4426382&postcount=586) | 1.388 | EVGA Classified E760 | Water | 3847A765
deachus (http://www.xtremesystems.org/forums/member.php?u=23427) | Core i7 920 [4C 4T] @ 4523.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4643227&postcount=1107) | 1.382 | ASUS Rampage III Extreme | Water | 3913A330
AceBaran (http://www.xtremesystems.org/forums/member.php?u=104392) | Core i7 920 [4C 4T] @ 4523.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4686962&postcount=1378) | 1.462 | ASUS Rampage III Extreme | Water | -
nickless (http://www.xtremesystems.org/forums/member.php?u=54214) | Xeon W3520 [4C 4T] @ 4523.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4591678&postcount=993) | 1.521 | ASUS Rampage III Extreme | Water | 3919A657
famich (http://www.xtremesystems.org/forums/member.php?u=25540) | Xeon W3520 [4C 8T] @ 4523.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4585391&postcount=962) | 1.316 | ASUS Rampage III Extreme | Water | 3848A352
maximus0206 (http://www.xtremesystems.org/forums/member.php?u=76549) | Core i7 920 [4C 4T] @ 4523.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4768622&postcount=1624) | 1.504 | ASUS Rampage II Gene | Water | 3844A716
mattkosem (http://www.xtremesystems.org/forums/member.php?u=89999) | Core i7 920 [4C 4T] @ 4522.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4232883&postcount=160) | 1.456 | EVGA Classified E760 | Water | 3849A895
neonatas (http://www.xtremesystems.org/forums/member.php?u=113994) | Core i7 875K [4C 4T] @ 4521.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4486820&postcount=771) | 1.440 | ASUS Maximus III Extreme | Water | L004B840
SteveRo (http://www.xtremesystems.org/forums/member.php?u=103330) | Core i7 965 [4C 4T] @ 4521.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4220935&postcount=138) | 1.568 | Gigabyte EX58-Extreme | Chilled Water | -
kill_a_wat (http://www.xtremesystems.org/forums/member.php?u=103989) | Core i7 950 [4C 8T] @ 4519.9 (http://www.xtremesystems.org/forums/showpost.php?p=4503161&postcount=834) | 1.336 | ASUS Rampage III Extreme | Water | -
donmarkoni (http://www.xtremesystems.org/forums/member.php?u=102254) | Xeon W3540 [4C 4T] @ 4519.7 (http://www.xtremesystems.org/forums/showpost.php?p=4502377&postcount=832) | 1.449 | ASUS Rampage III Extreme | Water | 3851A257
wiener007 (http://www.xtremesystems.org/forums/member.php?u=110079) | Core i7 950 [4C 8T] @ 4519.7 (http://www.xtremesystems.org/forums/showpost.php?p=4600657&postcount=1022) | 1.303 | ASUS Rampage III Extreme | Water | 3849B099
PolRoger (http://www.xtremesystems.org/forums/member.php?u=94709) | Xeon W3570 [4C 8T] @ 4519.6 (http://www.xtremesystems.org/forums/showpost.php?p=4657496&postcount=1233) | 1.312 | ASUS Rampage III Formula | Air | 3847A987
PolRoger (http://www.xtremesystems.org/forums/member.php?u=94709) | Xeon W3540 [4C 4T] @ 4519.6 (http://www.xtremesystems.org/forums/showpost.php?p=4661492&postcount=1264) | 1.416 | ASUS Rampage III Formula | Air | 3845B010
doz (http://www.xtremesystems.org/forums/member.php?u=113364) | Core i7 920 [4C 8T] @ 4517.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4149423&postcount=71) | 1.418 | Intel DX58SO | Water | -
sRHunt3r (http://www.xtremesystems.org/forums/member.php?u=12076) | Core i7 920 [4C 8T] @ 4515.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4230707&postcount=155) | 1.360 | Gigabyte X58A-UD7 | Water | 3938b024
radaja (http://www.xtremesystems.org/forums/member.php?u=87360) | Core i7 920 [4C 8T] @ 4515.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4364161&postcount=430) | 1.376 | Gigabyte X58A-UD3R | Water | 3845B027
beast200 (http://www.xtremesystems.org/forums/member.php?u=72311) | Core i7 920 [4C 4T] @ 4515.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4269166&postcount=203) | 1.392 | Gigabyte EX58-UD5 | Water | -
andressergio (http://www.xtremesystems.org/forums/member.php?u=56616) | Core i7 920 [4C 4T] @ 4515.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4641012&postcount=1086) | 1.472 | Gigabyte X58A-UD3R | Water | -
siyah (http://www.xtremesystems.org/forums/member.php?u=27841) | Core i7 960 [4C 4T] @ 4515.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4644927&postcount=1126) | 1.392 | Gigabyte X58-UD5 | Water | 3901B769
killerxp100 (http://www.xtremesystems.org/forums/member.php?u=113479) | Core i7 930 [4C 4T] @ 4514.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4760339&postcount=1610) | 1.424 | Gigabyte X58A-UD3R | Air | 3951B054
angelreaper (http://www.xtremesystems.org/forums/member.php?u=48684) | Xeon W3520 [4C 8T] @ 4514.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4268845&postcount=201) | 1.344 | Gigabyte X58A-UD7 | Air | 3845A935
l0ud_sil3nc3 (http://www.xtremesystems.org/forums/member.php?u=122713) | Core i7 920 [4C 8T] @ 4514.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4493987&postcount=802) | 1.424 | Gigabyte X58A-UD7 | Water | 3949A372
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i7 870 [4C 4T] @ 4512.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4171170&postcount=83) | 1.408 | Gigabyte P55A-UD6 | Water | L926B294
melnd (http://www.xtremesystems.org/forums/member.php?u=119332) | Core i7 920 [4C 4T] @ 4510.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4255568&postcount=188) | 1.344 | ASUS P6T SE | Air | 3938B020
imo (http://www.xtremesystems.org/forums/member.php?u=114754) | Core i7 920 [4C 4T] @ 4510.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4230116&postcount=151) | 1.336 | ASUS P6T Deluxe | Air | 3849B056
LostHawk (http://www.xtremesystems.org/forums/member.php?u=51370) | Core i7 920 [4C 4T] @ 4510.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4153311&postcount=77) | 1.368 | ASUS P6T Deluxe v2 | Water | -
vodka3dg (http://www.xtremesystems.org/forums/member.php?u=104860) | Xeon W3520 [4C 4T] @ 4510.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4645109&postcount=1127) | 1.472v | ASUS P6TD Deluxe | Water | -
gregregg (http://www.xtremesystems.org/forums/member.php?u=105897) | Core i7 920 [4C 4T] @ 4510.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4436087&postcount=624) | 1.392 | ASUS P6X58D-E | Water | 3913B007
managerman (http://www.xtremesystems.org/forums/member.php?u=17566) | Core i7 920 [4C 8T] @ 4510.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4284229&postcount=254) | 1.464 | ASUS P6T Deluxe V2 | Water | -
C-N (http://www.xtremesystems.org/forums/member.php?u=53004) | Core i7 930 [4C 4T] @ 4510.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4633589&postcount=1042) | 1.504 | DFI LP UT X58-T3E8H | Air | 3951A722
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i7 950 [4C 4T] @ 4508.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4652644&postcount=1155) | 1.456 | MSI Big Bang-XPower | Water | 3002B430
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Xeon W3550 [4C 4T] @ 4508.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4650125&postcount=1148) | 1.464 | MSI Big Bang-XPower | Water | 3949B156
sacoolza (http://www.xtremesystems.org/forums/member.php?u=122022) | Core i5 750 [4C 4T] @ 4507.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4584220&postcount=961) | 1.592 | ASUS Maximus III Gene | Water | L006C024
C-N (http://www.xtremesystems.org/forums/member.php?u=53004) | Core i7 950 [4C 4T] @ 4507.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4600060&postcount=1018) | 1.376 | Gigabyte X58-UD3R Rev 2 | Air | 3020A998
Mobsters (http://www.xtremesystems.org/forums/member.php?u=16015) | Core i7 920 [4C 4T] @ 4507.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4735223&postcount=1529) | 1.517 | EVGA X58 SLI E758 | Water | 3931A219
slaveondope (http://www.xtremesystems.org/forums/member.php?u=120902) | Core i7 920 [4C 8T] @ 4504.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4487721&postcount=777) | 1.432 | ASUS Rampage II Gene | Water | 3938Bxx
spoolindsm127 (http://www.xtremesystems.org/forums/member.php?u=125229) | Core i7 920 [4C 8T] @ 4504.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4828421&postcount=1830) | 1.396 | ASUS Rampage III Extreme | Water | 3949A372
JoeBar (http://www.xtremesystems.org/forums/member.php?u=4217) | Core i7 920 [4C 4T] @ 4504.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4720504&postcount=1483) | 1.482 | ASUS Rampage II Extreme | Water | -
CryptiK (http://www.xtremesystems.org/forums/member.php?u=92091) | Core i7 920 [4C 8T] @ 4504.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4281367&postcount=237) | 1.320 | ASUS Rampage II Extreme | Water | 3849B018
usz (http://www.xtremesystems.org/forums/member.php?u=122035) | Core i7 920 [4C 4T] @ 4504.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4284473&postcount=255) | 1.416 | ASUS Rampage II Gene | Water | -
xdave (http://www.xtremesystems.org/forums/member.php?111142-xdave) | Core i7 920 [4C 4T] @ 4504.0MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4890852&viewfull=1#post4890852) | 1.388 | EVGA Classified E770 | Water | 3912A859
Paradoxxx (http://www.xtremesystems.org/forums/member.php?u=18967) | Core i7 920 [4C 4T] @ 4503.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4726402&postcount=1511) | 1.435 | EVGA Classified E760 | Water | 3844A759
The Nemesis (http://www.xtremesystems.org/forums/member.php?u=22686) | Core i7 920 [4C 8T] @ 4503.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4535994&postcount=906) | 1.458 | EVGA Classified E760 | Water | 3849B028
miahallen (http://www.xtremesystems.org/forums/member.php?u=60377) | Core i7 920 [4C 8T] @ 4503.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4578948&postcount=952) | 1.505 | EVGA Classified E760 | Water | 3851A231
mwlhr (http://www.xtremesystems.org/forums/member.php?u=122771) | Core i7 920 [4C 8T] @ 4503.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4359393&postcount=412) | 1.470 | EVGA Classified E760 | Water | 3925A260
kup (http://www.xtremesystems.org/forums/member.php?u=2405) | Core i7 920 [4C 8T] @ 4501.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4374884&postcount=455) | 1.360 | ASUS P6X58D | Water | 3912B185
PolRoger (http://www.xtremesystems.org/forums/member.php?u=94709) | Core i7 920 [4C 4T] @ 4501.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4668381&postcount=1319) | 1.329 | EVGA Classified E760 | Chilled Air | 3849B018
Vinas (http://www.xtremesystems.org/forums/member.php?u=44558) | Core i7 860 [4C 4T] @ 4501.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4698870&postcount=1419) | 1.544 | Asus Maximus III Gene | Water | L925B479

__________________

Core i3 & i5 (Clarkdale, 32nm)

Rank | User | Frequency and # cores, threads | vCore | Motherboard | Cooling type | Full Batch #


tonzakung (http://www.xtremesystems.org/forums/member.php?u=127604) | Core i3 530 [2C 2T] @ 4950.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4545522&postcount=927) | 1.680 | Gigabyte H55M-USB3 | Water | L001B346
pet168 (http://www.xtremesystems.org/forums/member.php?58004-pet168) | Core i3 540 [2C 2T] @ 4937.1MHz (http://www.xtremesystems.org/forums/showthread.php?239175-Intel-4.5GHz-amp-5GHz-LinX-Stable-Club&p=4895818&viewfull=1#post4895818) | 1.544 | ASUS Maximus III Gene | Air | 3039B092
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i5 655K [2C 2T] @ 4900.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4674053&postcount=1336) | 1.584 | Gigabyte P55A-UD6 | Water | L008B538
tonzakung (http://www.xtremesystems.org/forums/member.php?u=127604) | Core i3 530 [2C 4T] @ 4862.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4545522&postcount=927) | 1.632 | Gigabyte H55M-USB3 | Water | L001B346
l0ud_sil3nc3 (http://www.xtremesystems.org/forums/member.php?u=122713) | Core i5 650 [2C 4T] @ 4800.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4452441&postcount=681) | 1.456 | Gigabyte H55N-USB3 | Air | 3942A600
l0ud_sil3nc3 (http://www.xtremesystems.org/forums/member.php?u=122713) | Core i5 655K [2C 4T] @ 4727.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4547367&postcount=928) | 1.488 | Gigabyte H55N-USB3 | Air | L009B514
LASeR10 (http://www.xtremesystems.org/forums/member.php?u=122887) | Core i3 530 [2C 4T] @ 4725.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4501520&postcount=827) | 1.568 | Gigabyte H55N-USB3 | Air | L004B690
Ace. (http://www.xtremesystems.org/forums/member.php?u=125941) | Core i5 661 [2C 4T] @ 4701.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4433212&postcount=618) | 1.399 | EVGA P55 SLI E655 | Water | L939B616
charlie (http://www.xtremesystems.org/forums/member.php?u=917) | Core i3 530 [2C 2T] @ 4625.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4465195&postcount=692) | 1.416 | Biostar TH55B HD | Water | L939B
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | Core i3 530 [2C 4T] @ 4620.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4395071&postcount=493) | 1.424 | Gigabyte P55A-UD6 | Water | 3943A849
Sommer (http://www.xtremesystems.org/forums/member.php?u=6729) | Core i5 650 [2C 4T] @ 4613.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4433061&postcount=616) | 1.416 | ASUS P7H55D-M Evo | Air | L945B745
SimpleTECH (http://www.xtremesystems.org/forums/member.php?u=84827) | Core i3 540 [2C 4T] @ 4611.6MHz (http://www.xtremesystems.org/forums/showpost.php?p=4521460&postcount=882) | 1.400 | MSI P55-GD85 | Water | 3944B043
eF_godlike (http://www.xtremesystems.org/forums/member.php?u=129412) | Core i3 540 [2C 4T] @ 4600.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4651581&postcount=1152) | 1.568 | Gigabyte H55M-D2H | Water | L028B490
[XC] 4X4N (http://www.xtremesystems.org/forums/member.php?u=15974) | Core i3 540 [2C 4T] @ 4600.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4528870&postcount=894) | 1.376 | Gigabyte P55-UD6 | Air | -
PiLsY (http://www.xtremesystems.org/forums/member.php?u=105) | Core i3 550 [2C 4T] @ 4598.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4450110&postcount=669) | 1.552 | Gigabyte P55-UD5 | Air | -
toptakachi (http://www.xtremesystems.org/forums/member.php?u=126905) | Core i3 530 [1C 2T] @ 4557.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4503800&postcount=839) | 1.536 | Gigabyte H55M-S2H | Air | -
gondezz (http://www.xtremesystems.org/forums/member.php?u=53815) | Core i3 530 [2C 4T] @ 4557.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4522644&postcount=884) | 1.392 | Gigabyte H55N-USB3 | Air | L004C090
PiLsY (http://www.xtremesystems.org/forums/member.php?u=105) | Core i3 530 [2C 4T] @ 4522.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4450110&postcount=669) | 1.456 | Gigabyte P55-UD5 | Air | -
rlkd82 (http://www.xtremesystems.org/forums/member.php?u=125548) | Core i3 530 [2C 4T] @ 4509.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4466735&postcount=696) | 1.470 | EVGA P55 FTW E657 | Air | 3001B039
l0ud_sil3nc3 (http://www.xtremesystems.org/forums/member.php?u=122713) | Core i5 655K [2C 4T] @ 4509.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4542620&postcount=924) | 1.376 | Gigabyte H55N-USB3 | Air | L008B537
sniper_sung (http://www.xtremesystems.org/forums/member.php?u=117564) | Core i3 540 [2C 2T] @ 4508.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4711274&postcount=1445) | 1.408 | Gigabyte H55N-USB3 | Corsair H50 | L024B960
0Ro! (http://www.xtremesystems.org/forums/member.php?u=95187) | Core i5 661 [2C 4T] @ 4500.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4596693&postcount=1002) | 1.328 | Gigabyte P55A-UD6 | Air | L008B537


__________________

Core 2 Quad

Rank | User | Frequency and # of cores | vCore | Motherboard | Cooling type | Full Batch #


OLDcomer (http://www.xtremesystems.org/forums/member.php?u=65849) | C2Q Q9650 [4C] @ 4707.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4714526&postcount=1459) | 1.424 | Gigabyte EP45-UDP | Water | L826B006
Jor3lBR (http://www.xtremesystems.org/forums/member.php?u=55036) | C2Q Q9650 [4C] @ 4680.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4115927&postcount=11) | 1.408 | Gigabyte EP45-Extreme | Water | -
andressergio (http://www.xtremesystems.org/forums/member.php?u=56616) | Xeon X3380 [4C] @ 4500.2MHz (http://www.xtremesystems.org/forums/showpost.php?p=4398531&postcount=502) | 1.376 | Gigabyte EP45T-USB3P | Water | L834B623
Hoss331 (http://www.xtremesystems.org/forums/member.php?u=100894) | C2Q Q9650 [4C] @ 4500.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4234320&postcount=164) | 1.344 | Gigabyte EP45T-UD3P | Water | L827A945
radaja (http://www.xtremesystems.org/forums/member.php?u=87360) | C2Q Q9650 [4C] @ 4499.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4115969&postcount=14) | 1.376 | Gigabyte EP45-UD3P | Water | -

__________________

Core 2 Duo

Rank | User | Frequency and # of cores | vCore | Motherboard | Cooling type | Full Batch #


dragonhunter (http://www.xtremesystems.org/forums/member.php?u=9442) | C2D E8400 [2C] @ 4698.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4582196&postcount=957) | 1.504 | ASUS Rampage Extreme | Phase | -
adadk (http://www.xtremesystems.org/forums/member.php?u=121324) | C2D E8700 [2C] @ 4600.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4234973&postcount=168) | 1.440 | ASUS P5E | Air | -
tom23 (http://www.xtremesystems.org/forums/member.php?u=126923) | C2D E8400 [2C] @ 4530.5MHz (http://www.xtremesystems.org/forums/showpost.php?p=4593207&postcount=995) | 1.408 | Gigabyte EP45-UD3R | Water | -
ToxicWk (http://www.xtremesystems.org/forums/member.php?u=112360) | C2D E8500 [2C] @ 4519.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4171445&postcount=84) | 1.480 | ASUS P5E | Air | -
Dekara (http://www.xtremesystems.org/forums/member.php?u=21368) | C2D E8600 [2C] @ 4510.4MHz (http://www.xtremesystems.org/forums/showpost.php?p=4599664&postcount=1016) | 1.312 | DFI P45-T2RS Plus | Air | Q820A606
Telo (http://www.xtremesystems.org/forums/member.php?u=80530) | C2D E8600 [2C] @ 4505.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4231340&postcount=158) | 1.329 | Foxconn BlackOps | Water | -
Elloquin (http://www.xtremesystems.org/forums/member.php?u=96458) | C2D E8700 [2C] @ 4505.7MHz (http://www.xtremesystems.org/forums/showpost.php?p=4317465&postcount=355) | 1.392 | ASUS Rampage Extreme | Water | -
cheapseats (http://www.xtremesystems.org/forums/member.php?u=92494) | C2D E8600 [2C] @ 4504.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4693414&postcount=1408) | 1.392 | ASUS Rampage Extreme | Air | Q820A606
hellper (http://www.xtremesystems.org/forums/member.php?u=139058) | C2D E8500 [2C] @ 4502.8MHz (http://www.xtremesystems.org/forums/showpost.php?p=4822530&postcount=1804) | 1.360 | Gigabyte P35-DS4 | Air | -
Nr2 (http://www.xtremesystems.org/forums/member.php?u=124766) | C2D E8400 [2C] @ 4500.3MHz (http://www.xtremesystems.org/forums/showpost.php?p=4588525&postcount=977) | 1.296 | Gigabyte P35-DS3L | Air | -
OLDcomer (http://www.xtremesystems.org/forums/member.php?u=65849) | C2D E5200 [2C] @ 4500.1MHz (http://www.xtremesystems.org/forums/showpost.php?p=4604727&postcount=1033) | 1.504 | Gigabyte EP45-UDP | Water | Q831B293
PatRaceTin (http://www.xtremesystems.org/forums/member.php?u=108336) | C2D E8400 [2C] @ 4500.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4424250&postcount=574) | 1.368 | ASUS P5Q-E | Water | Q842B072
radaja (http://www.xtremesystems.org/forums/member.php?u=87360) | C2D E8500 [2C] @ 4500.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4530772&postcount=898) | 1.440 | Gigabyte EP45-UD3P | Water | -
OC Nub (http://www.xtremesystems.org/forums/member.php?u=68368) | C2D E8400 [2C] @ 4499.9MHz (http://www.xtremesystems.org/forums/showpost.php?p=4151959&postcount=74) | 1.456 | Gigabyte EP45-DQ6 | Water | -

__________________

If you spot an error, or have some issues / concerns (such as missing or incorrect entries), PM me! :up:

[FlanK3r]

lol, where is someone?:)

[Sam_oslo]

"I cannot participate just yet due to some parts arriving and cooling not properly configured", too :rofl:

[Splave]

I think you should set a max mem settings as some will have 3x1gb and other 3x2gb etc the later being twice as long

[Vinas]

I could run this at 4.5GHz but my CPU would become similar to the surface of the sun.

[zsamz_]

i been 4.6 stable for a loooong time on e8600
i not runnin linX :ROTF:

[rge]

Already had done this for similar thread on another forum, 4.5 is 11+ hrs prime stable (sig) and 20 passes at 25K, basically max mem at boot up. This was with 2x360 rads, indigo xtreme tim, GT fans push/Scythe pull at 1700rpm/1500rpms on rheostat.
http://img246.imageshack.us/img246/6889/4500linx20run.jpg

[lowfat]

4.6GHz Linpack stable w/ my i7 920. Motherboard limited. Well that was until the motherboard died :p:
Should be back up in a week though.

[zalbard]

I could run this at 4.5GHz but my CPU would become similar to the surface of the sun.
Haha, you need some Delta fans! They can freeze the hell np. :D

i been 4.6 stable for a loooong time on e8600
i not runnin linX :ROTF:
Post your info then! That way some people who have decent cooling might find your settings useful. :up:

Already had done this for similar thread on another forum, 4.5 is 11+ hrs prime stable (sig) and 20 passes at 25K, basically max mem at boot up. This was with 2x360 rads, indigo xtreme tim, GT fans push/Scythe pull at 1700rpm/1500rpms on rheostat.
Nice job, adding your result! Thank you! :up:

4.6GHz Linpack stable w/ my i7 920. Motherboard limited. Well that was until the motherboard died :p:
Should be back up in a week though.
Looking forward to it!

[justin.kerr]

Here is an old one, almost a year old. lol. I think I had 2 360 rad at that time..

http://i18.photobucket.com/albums/b140/hoss3430/5.jpg

[Jor3lBR]

Here's my contribution:

[Prime95 Blend - IBT - Linx Dual Instances - HCI Memtest - 3DMark01)]

http://img508.imageshack.us/img508/4335/jor3lbr1.th.jpg (http://img508.imageshack.us/i/jor3lbr1.jpg/)


---

http://img31.imageshack.us/img31/124/jor3lbr2.th.jpg (http://img31.imageshack.us/i/jor3lbr2.jpg/)

[justin.kerr]

does HT off count? :rofl:

[zalbard]

does HT off count? :rofl:
As long as it's Intel and 4.5GHz+, it does! :up:

[radaja]

heres mine.water cooled with cool air.
http://i48.tinypic.com/15502fb.jpg

[zalbard]

Updated OP with your results. :D
Thanks everyone! :up:
Remember, if you feel like mentioning voltages or cooling or hardware used, feel free to, I will note this. Might help someone, who knows! :yepp:

[Sniper]

http://img.techpowerup.org/091109/4641%20linx%20run%20small.png

Good luck with what I hope is your new wc setup Sam, I dont think you'll have any problem joining this club :D

[Jor3lBR]

Could you correct my vcore on the ranking? Please don't use ET6 as reference use CPUZ vcore. Thanks.

[dejanh]

This is my everyday 24/7 overclock, fans at ~1000RPM (3 fans, sandwiched, silent), MCR320-QP-Stack (2 radiators, sandwiched), HeatKiller Rev.3.0 CU, EK full cover block...lately the ambient temperature in the computer room is about 27C (due to winter heating) hence the higher temperatures. This overclock is completely rock-solid and can resume from S3 without any issues. This is With Vdroop and load voltage is ~1.411V.

http://img.techpowerup.org/091119/21x215_12h_Prime_Stable_Finished.png

Here is a run I did some time ago...same cooling setup, though lower ambient temperatures (about 24C) and slightly higher fan speed (about 1800RPM).

http://img.techpowerup.org/091015/LinX_20x_Pass_Stable_4620MHz_Core_HT_On_Running.pn g

I did another run at 4.7GHz but never took a screen-shot. I might redo it over the next few days if I have time. All of this is on EVGA X58 Classified E759. Finally, the darn CPU-Tweaker has been having problems for me for quite some time now with not being able to detect clocks properly. This all started after I updated to CPU-Tweaker 1.2 and/or changed the DRAM from Corsair 1600MHz kit to Mushkin 1600MHz kit. The multipliers are correct though in CPU-Tweaker, just for some reason does not show the clocks.

[zalbard]

Could you correct my vcore on the ranking? Please don't use ET6 as reference use CPUZ vcore. Thanks.
Yes, sure, no problem! :up:

[Smartidiot89]

Surprised the Pentium 4 people didn't show up :p:

[zalbard]

Surprised the Pentium 4 people didn't show up :p:
:lol:
Who knows, they might! :rofl:

[Hoss331]

My daily settings on water.

http://i131.photobucket.com/albums/p293/hoss281/45linx.jpg

[kiwi]

How about you add 40 passes of linx with maximum memory usage? Or at least 20 with 2GB+

Otherwise I can just run linx 1 pass :D

[zalbard]

How about you add 40 passes of linx with maximum memory usage? Or at least 20 with 2GB+

Otherwise I can just run linx 1 pass :D
Well, can change the requirements to 20 passes I guess. I was considering it. 40 is definitely not needed.
I just personally don't see much point in running more than 10 passes of LinX, if it crashes, it's like within first 3-5 loops in 98% of cases.
I'll add everyone who's already ran LinX with 10 passes up to this point, though. No need to re-submit your results unless you want to. And sorry for inconvenience.

[Sam_oslo]

I had a 3 minute run @4.5HGZ (214.1x21) 1.36v last night, but it got too hot for my hot babe on air. It was running at 88'C :explode2: .

I stopped it in a hope to get away with 5 run later, but now it went up to 20 :shakes:. Should've let it run last night.

[zalbard]

I stopped it in a hope to get away with 5 run later, but now it went up to 20 :shakes:. Should've let it run last night.
It was 10 yesterday. And difference in stability between 10 and 20 is minimal IMO.

[Jor3lBR]

I've observed a pattern in errors between 10-20 passes. Maybe caused by heat, maybe not. So I guess at least 15 is good.

[Zeus]

I've never ran this before so no idea if this is right?

Can somebody explain what "problem size" means and do i have to set "memory(MiB)" manually? :shrug:

[zalbard]

Problem size is related to the RAM volume being used by the program. The more you set, the longer it takes to calculate, the harder it stresses the CPU. You can click "All" to use all the available memory, it's the best setting. :yepp:

[OC Nub]

I've observed a pattern in errors between 10-20 passes. Maybe caused by heat, maybe not. So I guess at least 15 is good.

I have failed linx many times after 10 passes, I wouldn't exactly call 10 passes "stable" but that is just my opinion. Everyone has there own way of testing stability.

[andressergio]

I have failed linx many times after 10 passes, I wouldn't exactly call 10 passes "stable" but that is just my opinion. Everyone has there own way of testing stability.

Same here OC Nub i was i able to pass linx 10 times and then blend fails instant...

Better test for me are still long prime runs

Cheers :up:
Sergio

[Jor3lBR]

I have failed linx many times after 10 passes, I wouldn't exactly call 10 passes "stable" but that is just my opinion. Everyone has there own way of testing stability.


Same here OC Nub i was i able to pass linx 10 times and then blend fails instant...

Better test for me are still long prime runs

Cheers :up:
Sergio

Dunno if my post was clear enough but we are agreeing on the same thing guys :up:

I just said that so the OP could raise the minimal # of Linx passes to a number higher then 10 because 5 passes means nothing.

[OC Nub]

Jor, yes I was agreeing with your post that 15-20 passes would be a better test of stability, have failed at 18 passes before. Should have put a "+1" at the beginning of my post, sry.

[-n7-]

I cannot join this club due to aircooling, but i wanted to add/agree that i've seen LinX error past 10 passes many times.

I personally find 20-25+ ideal, & will run 50 passes to be certain.

[zalbard]

I just said that so the OP could raise the minimal # of Linx passes to a number higher then 10 because 5 passes means nothing.
It was 10 a day before yesterday, it's 20 since yesterday. Should be just enough.
It's never been 5, no clue where you read that.
I use 20 myself. It is just a lot of people I see on these forums who moan and complain about stress testing their hardware for too long hence the requirement was a bit too low at first. Since no one has issues with that, it's up to a more decent value now.
Hope that satisfies you! :up:

[zalbard]

Slightly cleaned up the OP, enjoy. :D
Hope it's more clear now!

[OC Nub]

It was 10 a day before yesterday, it's 20 since yesterday. Should be just enough.
It's never been 5, no clue where you read that.
I use 20 myself. It is just a lot of people I see on these forums who moan and complain about stress testing their hardware for too long hence the requirement was a bit too low at first. Since no one has issues with that, it's up to a more decent value now.
Hope that satisfies you! :up:

20 passes is perfect :up:. May put my 9650 rig back together and try some linx. Winter is on its way, temps are much cooler now.

[doz]

:D Proud to join. Did this with the rig in my sig. 80c load w/ 24c ambient.
http://members.cox.net/tjgjkt/4.5stable.jpg

[zalbard]

Holy cow, good job there! :D
Welcome! :up:

[ajaidev]

http://img163.imageshack.us/img163/9844/ss02p.jpg


There is something wrong here !!! I would have expected more performance, also at 4.6Ghz it works great.

Also from what i can make out if i know how to read Linx it should have taken 52-54mins to complete the round but it took almost 50min's so i am confused if anyone can tell me what the hell is going on???0

EDIT:- Used chilled water cooling, the i9 gets hot quite soon i dont think that sensors tell the truth ammm who knows...

[zalbard]

It's Core i9, it has some issues with LinX iirc, check LinX thread.

[rge]

Had ran prime at 4600 in past, but bsoded at some point after 3-4hrs. 4.6, 20 max mem run with open window, fan, and 16C outside temps, ambient around rads varied from 17C to 19C, 2x360rads. Not stable at room temps, but ok in sub 20C temps. My 24/7 is still 4.4 which even if loads at 90C with fans off is rock stable, and only needs 1.34vcore.

http://img265.imageshack.us/img265/6893/4600linx.png

We need a 32m spi stable thread, just ran 4.92ghz 32m with open window/fan when temps even colder outside.
http://www.xtremesystems.org/forums/showpost.php?p=4122063&postcount=3328

[zalbard]

We have categories in this thread if this is what bothers you. So not like i7 owners compete with people who have i9.

[ajaidev]

We have categories in this thread if this is what bothers you. So not like i7 owners compete with people who have i9.

lol the categorization mechanism has failed...




~ The list ~

Core i9
1. ajaidev (http://www.xtremesystems.org/forums/member.php?u=88416) - i9 @ 4600.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4122489&postcount=40). 1.442V vCore.
2. rge (http://www.xtremesystems.org/forums/member.php?u=54910) - i9 @ 4600.0MHz (http://www.xtremesystems.org/forums/showpost.php?p=4122674&postcount=42). 1.456V vCore. "Had ran prime at 4600 in past, but bsoded at some point after 3-4hrs. 4.6, 20 max mem run with open window, fan, and 16C outside temps, ambient around rads varied from 17C to 19C, 2x360rads. Not stable at room temps, but ok in sub 20C temps."


:ROTF:

[zalbard]

I don't see how? Enlighten me?

[ajaidev]

But the CPUz he posted has a i7 950 with 4 core and not a i9, am i wrong ???

I am sooo confused maybe the fumes...

[zalbard]

But the CPUz he posted has a i7 950 with 4 core and not a i9, am i wrong ???

I am sooo confused maybe the fumes...
LOL, that's me being retarded, pardon. :p: Hold on, fixing.

Edit: fixed, thanks for noting. :up:

[ajaidev]

LOL no probs, i really want to know how much the i9 can deliver in Gflops... Mine can do 66Gflops and the one on the LinX thread can do 41Gflops ohhh how much can these things do??

[Peen]

http://i48.tinypic.com/sey4ib.png

Here is mine so far stiillll working on it, back up to 4.6ghz. Havent used this PC in two months and moved from Oregon to Arizona so everything is kinda blank right now. My vcore is 1.45 under load not 1.5v

Oooops uploaded the wrong one and deleted the 20run. Oh well, run it later

oh and my vidcard is dead and keeps shutting off, its so lame

[zalbard]

Updated! :)
Where are Core 2 Duo users? :confused:

[LennyRhys]

There are only a handful of C2D users who have LinX-stable systems. If I hadn't sold my E8500 I'd have been in this club :D

[Peen]

Oh ya some notes on mine. 12GB ram, and little 2x220 hot rad

[poke349]

Quick OC question:

Once you've reached the point where increasing vcore and v-uncore doesn't help anymore, what else do you guys tweak to get higher?

I'm stuck at 4.2 GHz, which is rock stable with 1.275v LLC on.
But I can't get 4.3 GHz to pass LinPack even with 1.400v LLC on.

[Alexxx650]

http://s48.radikal.ru/i120/0912/28/9f8b4fbee15dt.jpg (http://radikal.ru/F/s48.radikal.ru/i120/0912/28/9f8b4fbee15d.jpg.html)
My sys

[Peen]

Quick OC question:

Once you've reached the point where increasing vcore and v-uncore doesn't help anymore, what else do you guys tweak to get higher?

I'm stuck at 4.2 GHz, which is rock stable with 1.275v LLC on.
But I can't get 4.3 GHz to pass LinPack even with 1.400v LLC on.

Could be alot of things. Try putting the multi down and seeing if its still crashing, see if its cpu or board

[poke349]

Could be alot of things. Try putting the multi down and seeing if its still crashing, see if its cpu or board

It stops crashing if I give it enough vcore, but it will give wrong residuals for the longer runs no matter how much vcore and v-uncore I give it.

I haven't been able to get 4.3 GHz to pass more than 10min. of IBT on very high.

On the other hand, it can take prime95 for at least 10 min.
y-cruncher stress-test gives mixed results, since it runs hot enough to kill off turbo boost and clock down to 4.1.


Thx, I'll try it in the winter when the outside ambient temps are sub-zero Fahrenheit.

[Peen]

I bet its somewhat temp related. get it colder and bet it will be more willing

[poke349]

I bet its somewhat temp related. get it colder and bet it will be more willing

Ah, okay. You're probably right. I'm on air, and temps will reach 90C at 4.3 GHz with 1.4v LLC on.

I'm pretty sure my batch isn't horrible as I've seen people with very similar batch #s hit 4.8 GHz with under 1.4 vcore.

[justin.kerr]

tried with HT off yesterday, made 4.8Ghz but the Gflops were really low, so don't know if my RAM timings needed to be loosened up a bit, because they are pushed at 4.7Ghz.. so I lowered the OC a bit and the Gflops wen't to a "normal" level.

Rig in sig.

http://i18.photobucket.com/albums/b140/hoss3430/13.png

[zalbard]

You have really low temps for such clocks... Well done! :up:
Why HT off if you're not limited temperature wise, though?
What would be the temp difference in that case?
Or no way it can get stable then?

[Sniper]

HT off usually gives 100-150 more on max clock, and at lower temps too.

[justin.kerr]

HT off lowered temps a ton, and I had 61F-62F ambiant..:yepp:
I now run 24/7 @ 4.7Ghz well 223 B clock x 21 multi with HT on, but I wanted to see what HT off would do.. and it went 20 passes @ 229 x 21 but the Gflops went way down, so I think the RAM was being pushed too hard, and I didn't want to mess around with my timings much just for a temp OC.

[doz]

Gotta say I totally agree with raising the passes from 10 to 20.

I was 15 passes in on a LINX run last night, 4.6ghz @ 1.48v. Needless to say my screen suddenly turned orange and the computer locked up lol.

[kone]

My daily 24/7 settings on water, all fans at 800RPM. it is 24C ambient. :D

http://i645.photobucket.com/albums/uu180/fcjkone/test/13625v46G-linx25.jpg

[zalbard]

My daily 24/7 settings on water, all fans at 800RPM. it is 24C ambient. :D
Whoa, these are really low volts for this OC! You have a golden chip there! :D
Could you share your PLL value and PCI-Express frequency please? Perhaps adjusting these helps?

[kone]

Whoa, these are really low volts for this OC! You have a golden chip there! :D
Could you share your PLL value and PCI-Express frequency please? Perhaps adjusting these helps?

no problem, PCI-Express frequency is 102.

http://i645.photobucket.com/albums/uu180/fcjkone/test/13625v46G-sett.jpg

this chip can do 1.34v 4.6G in WinXP, but must 1.37v in Win7 :rofl:
http://i645.photobucket.com/albums/uu180/fcjkone/test/134v46G.jpg

[uranium]

Here's my effort 4.566GHz. HT off- couldn't quite get it stable with HT on, but hopefully I can still join the club;)

http://img22.imageshack.us/img22/8414/4566hz20xlinx.th.jpg (http://img22.imageshack.us/i/4566hz20xlinx.jpg/)

EVGA Classified
Heatkiller 3.0 (Cu) cooled by peltier chilled water (keeps water temp < 25C during LinX run)

[zalbard]

Here's my effort 4.566GHz. HT off- couldn't quite get it stable with HT on, but hopefully I can still join the club;)
Sure! :yepp:
Welcome! :cool:

[uranium]

Sure! :yepp:
Welcome! :cool:

Thanks :)

[mattgmann]

http://i921.photobucket.com/albums/ad52/mattgmann2/linx_stable_45_1280.jpg

Ram is only at 1286mhz. My ocz kit refuses to be linx stable with the 2:8 multi. Timings are tight however at 6-6-6-18 and 1.5v to vdimm. I've tried dramatically loosening the timings and raising the voltage as high as 1.75, but no go with higher speeds.

VTT is 1.35v, and I've sinced managed to get it stable with 1.354v vcore. 4.6ghz is stable as well, but requires considerably more voltage. I'm stuck at 222 bclk though. I cannot even get bench stability above that.

[doz]

Not sure if I can update mine, but I got my vcore lowered a decent amount. 1.418v now, instead of 1.44v.

http://members.cox.net/tjgjkt/4.5stable.png

[zalbard]

Not sure if I can update mine, but I got my vcore lowered a decent amount. 1.418v now, instead of 1.44v.
Sure, no problem.
Nice job! :up:

[jcool]

w00t w00t guys, some awesome chips in this thread, congratz to all owners!

My 3848A352 w3520 would like to join, unfortunately I am running a DFI JR at the moment, which cannot cope with the current and shuts down due to PWM overheating even at 4,4Ghz - 1,3V :ROTF:
Will join you guys as soon as I get my E760 back from RMA, here's a teaser though, memtest stable at ~1,38V VTT / 1,72V Vdimm (Samsung HCF0's) ;)

http://database.he-computer.de/Bilder/temp/3520_winrar.jpg

[OC Nub]

My e8400 on high vcore but it passed.

http://img152.imageshack.us/img152/6605/4500mhzlinx8400.png (http://img152.imageshack.us/i/4500mhzlinx8400.png/)

[kimandsally]

Here's mine.

http://img442.imageshack.us/img442/8806/linx424mhz5098mbram20pa.th.jpg (http://img442.imageshack.us/i/linx424mhz5098mbram20pa.jpg/)

[zalbard]

The OP is up to date. :D
Good job everyone! :up:

@ kimandsally
Any chance you can crop your posted image with your cute kitty so it's not so wide? :) Stretches the page's width quite some and a bit over the top. ;)

[LostHawk]

My turn, finished to build & test new christmas rig:
i7 920 D0 at 4.5GHz (HT Off) giving 66 GFlops with 1.368v using only one internal triple rad with 3 fans to water cool both the cpu and an overclocked ATI 5870.

P6T Deluxe v2 board rev:1.02g chipset X58 rev:B03 crossflashed with 'no-throttle' 0006 Bios (more hardware in sig).

Screenshot and some Bios data that can help others:
---------------------------------------------------
CPU Ratio: 21 - BCLK: 215 - PCIE: 100 - DRAM Fr: 1723MHz - UCLK Fr: 3663MHz - QPI Link: 7759MT/s
CPU Volt: 1.375 (1.368 under load) - CPU PLL: 1.80 - QPI/DRAM Volt: 1.375 - DRam Bus Volt: 1.64 - DRam Timings: 7,8,7,21,1N
LLC: Enabled - cpu Amplitude= Auto - *skews: Auto, *spectrums/c1e/VT/TM/EDB/HT/A20M/SpeedStep/C-State: Disabled

http://i224.photobucket.com/albums/dd300/kurway/i7oc4500.jpg

[zalbard]

Very nice and detailed info, thanks! :up:

[cky2k6]

This was in my htpc, I slapped a true on it, and it turned out well, I'd say. It loads at 1.344 most of the time, not 1.328v, and it hates llc.
http://img46.imageshack.us/img46/3650/97583664.jpg (http://img46.imageshack.us/i/97583664.jpg/)

[Boyu]

may i joint, thx

Watercooled, HT ON
http://i194.photobucket.com/albums/z282/huskar/linx451388.jpg

[zalbard]

may i joint, thx
Sure, welcome. :)

And good job everyone! :up:

[lowfat]

http://img199.imageshack.us/img199/5967/48ghz.jpg
Cooled w/ a single stage phase change.
4811MHz w/ HT on.

[OC Nub]

First try using 4 threads on the 870. Will try and lower vcore.


Edit: another run using more mem and less vcore.

1.408v Vcore, 1.30VTT, 1.640v DRam, 1.80v PLL, 1.080v PCH, Gigabyte P55A UD6.

http://img33.imageshack.us/img33/3167/45ghz.png (http://img33.imageshack.us/i/45ghz.png/)

[ToxicWk]

Can I join:D:D:D? Done with a Mugen II and Ceramique with 27 C ambient .Motherboard is p5e

[zalbard]

Updated, and welcome! :yepp:

[Jor3lBR]

My dual core contribution:

E8600 Q820A727 5100Mhz + Super Talent Project X DDR3 1800 D9GTR (haven't tested lowest vcore yet, just quick stable run):

http://img710.imageshack.us/img710/1455/5100mhze8600stable.th.jpg (http://img710.imageshack.us/i/5100mhze8600stable.jpg/)

http://img94.imageshack.us/img94/5988/5100mhze8600stable2.th.jpg (http://img94.imageshack.us/i/5100mhze8600stable2.jpg/)


Extreme Tweaker

Ai Overclock Tuner [Manual]
OC From Memory Level Up [Auto]
FSB Frequency [537]
CPU Ratio Setting [9.5]

* CPU clock skew [Auto]
* NB clock skew [Auto]
FSB Strap to North Bridge [200]
PCIE Frequency [102]
DRAM Frequency [1790]
DRAM Command Rate [1N]
DRAM Timing Control [Manual]

1st information
CAS# Latency [7]
RAS# to CAS# Delay [7]
RAS# PRE Time [7]
RAS# ACT Time [21]
RAS# to RAS# Delay [Auto]
REF Cycle Time [68]
WRITE Recovery Time [Auto]
READ to PRE Time [Auto]

2nd information
READ to WRITE Delay(S/D) [Auto]
WRITE to READ Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ to READ Delay(S) [Auto]
READ to READ Delay(D) [Auto]
WRITE to WRITE Delay(S) [Auto]
WRITE to WRITE Delay(D) [Auto]

3rd information
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]

DRAM Static Read Control [Auto]
DRAM Dynamic Write Control [Auto]

> DRAM Skew Control :
DRAM CMD Skew on Channel A [Auto]
DRAM CLK Skew on DIMM A1 [Auto]
DRAM CLK Skew on DIMM A2 [Auto]
DRAM CTL Skew on DIMM A1 [Auto]
DRAM CLT Skew on DIMM A2 [Auto]

DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on DIMM B1 [Auto]
DRAM CLK Skew on DIMM B2 [Auto]
DRAM CTL Skew on DIMM B1 [Auto]
DRAM CTL Skew on DIMM B2 [Auto]

Ai Clock Twister [Auto]
Ai Transaction Booster [Manual]

Common Performance Level [7]

Pull in of CHA PH1 [Disabled]
Pull in of CHA PH2 [Disabled]
Pull in of CHB PH1 [Disabled]
Pull in of CHB PH2 [Disabled]

(-- Manual --)

EPU II Phase Control [Auto]

*** Please key in numbers or select voltage!***
CPU Voltage [1,61250]
Load-Line Calibration [Enable]
CPU PLL Voltage [1,5773]
FSB Termination Voltage [1,39...]
CPU GTLVref(0) [+40]
CPU GTLVref(1) [+40]
CPU GTLVref(2) [Auto]
CPU GTLVref(3) [Auto]
NB GTLVref [+30]
North Bridge Voltage [1,69]
DRAM Voltage [Auto]
NB DDRVref [Auto]
DDR3 Channel A Vref [Auto]
DDR3 Channel B Vref [Auto]
South Bridge 1.5 Voltage [1,57...] two or three step up for your RAID
South Bridge 1.05 Voltage [1,09...] two or three step up for your RAID

******************************************
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]


Open Case.
Air temp: 17oC.
Cooler: OCZ Cryo-Z

[OC Nub]

WOW, great job with the e8600 Jor. :up:

[WaterFlex]

lowfat
That`s pretty nice :up:

[OC Nub]

Newer batch i7 920.

http://img686.imageshack.us/img686/7239/4500.png (http://img686.imageshack.us/i/4500.png/) http://img686.imageshack.us/img686/4500.png/1/w1174.png (http://g.imageshack.us/img686/4500.png/1/)

[zsamz_]

Newer batch i7 920

lots of juice but you got there:p:

[OC Nub]

lots of juice but you got there:p:

Yeah it isn't a golden chip but I am happy with the temps. Its a newer batch#3945A936. I am happy with it, I hope to do some nice 3Dbenches with this new rig. Vcore is high but 4500mhz is 4500mhz, and Im having fun.:up:

[ChaosAD]

OC Nub what is your cooling and what is the ambient temp to get 75C under load at 4.5Ghz/1.48v?

[zsamz_]

Yeah it isn't a golden chip but I am happy with the temps. Its a newer batch#3945A936. I am happy with it, I hope to do some nice 3Dbenches with this new rig. Vcore is high but 4500mhz is 4500mhz, and Im having fun.:up:

:yepp: gettin to 4.5 is :up:

[OC Nub]

OC Nub what is your cooling and what is the ambient temp to get 75C under load at 4.5Ghz/1.48v?

I am using the XSPC rx360, mcp655, apogee XT block, and an ek multioption res150, in my avatar its hard to see buy there is a window unit AC blowing at the rad.

[andressergio]

Newer batch i7 920.

http://img686.imageshack.us/img686/7239/4500.png (http://img686.imageshack.us/i/4500.png/) http://img686.imageshack.us/img686/4500.png/1/w1174.png (http://g.imageshack.us/img686/4500.png/1/)

Congrats friend you did it !!!

Cheers :up:
Sergio

[OC Nub]

Thank you Sergio.

[EnisDonKing]

Does anyone have any experience with Core i7 920 D0 batch 3941B138 CPUs?

[zalbard]

Does anyone have any experience with Core i7 920 D0 batch 3941B138 CPUs?
Try asking here (http://www.xtremesystems.org/forums/showthread.php?t=213105&page=67).

[CryptiK]

Nice work guys.

Just a reminder to please put your overclocks into the Xtremesystems database I made (make sure you show stability test in SS) - found Here (http://www.xtremesystems.org/forums/showthread.php?t=238451)

Add your OC details to the form, then click submit and the database will automatically update with your results. There is a link to the database in the thread I linked you to and
you can download it yourself in various formats as you wish.

[ChaosAD]

According to my 4.4Ghz runs i think that i ll need about 1.55v to run 4.5Ghz HT on 20 Linx runs with temps around 90C. Do you think its safe for 20 runs. I would be able to pass with HT off with less vcore but i consider it cheating :p:

[zalbard]

Yeah, it's safe, but it's pretty hard to get stable with such temps from my experience.

[ChaosAD]

I ll give it a shot and report back. If i will not manage to get is stable at 4.5 ht on then you will make it a 4.4 club :p:

[zalbard]

I ll give it a shot and report back. If i will not manage to get is stable at 4.5 ht on then you will make it a 4.4 club :p:
LOL, I'm in the same boat. :p: I keep tweaking trying to get the temps down.
Good luck, though! :up:

[ChaosAD]

The only mod i can make is to open the window at night to get some 10C cold air from outside and close the heating, LOL

[trn]

w3520 3945a Water cooled with the help of nature. Ambient temps between .5 - 1c. Everything is overvolted more than it needs to be but I failed LinX at 1.5 Vcore after 16 passes and it was getting late so I just cranked up all my voltages ftw.

My 2 previous i7-920 39xxx batches couldn't come close to this so i'm pleased with this Xeon.

http://i399.photobucket.com/albums/pp80/trn_photobucket/w3520-45pass.jpg

[zalbard]

Updated.
@ trn: good job, and very nice temps! :up:

[AlfaBoy]

I would like to join the club too :D

http://img25.imageshack.us/img25/6195/45001hlinx.png

[trn]

@alfaboy, very nice! Do you know what batch your 920 is?

[andressergio]

could linx it but summer now so i will show blend...running 2,5hs+ on a winter day

http://img64.imageshack.us/img64/5633/45001200.png (http://img64.imageshack.us/i/45001200.png/)

Cheers
Sergio

[AlfaBoy]

@alfaboy, very nice! Do you know what batch your 920 is?

My 920 D0 BATCH #: 3849A765

[tool_462]

Do i5-6xx count for this? :p:

If so, that list is going to grow here pretty quick.

[zalbard]

Do i5-6xx count for this? :p:

If so, that list is going to grow here pretty quick.
Sure. :up:
They are made by Intel, aren't they? :D

[aka_GK]

awesome party you have here, I wanna join :D :party:
http://img297.imageshack.us/img297/2408/4500cut.png

[WaterFlex]

aka_GK
Very nice :up:

[scgt1]

What are the odds of the list being updated with batch #'s?

[zalbard]

What are the odds of the list being updated with batch #'s?
A lot of people don't want to remove their coolers just to tell us their batch numbers so this will not make it into requirements.
A few people listed them, though.
But there are so many batch number threads already so it shouldn't be a big deal anyway.
However, if people wish to list their batch numbers, I will surely add them to OP.

[kone]

Well, i got this monster on water. :rofl:

test on water rig:
ddc3.25/xspc res top->He120.3(3x GT-ap15)->HK 3.0 cu.
ambient is 20C.

Very disappoint the Evga board not supports this CPU now. still waiting the new bios from EVGA. :(

http://i645.photobucket.com/albums/uu180/fcjkone/test/1525v48G-linx.jpg?t=1264333159

[zalbard]

Well, i got this monster on water. :rofl:
That's an amazing chip, congrats! :up:

[kone]

more update,

4.83G pass linx 50 run on water :rofl:

http://i645.photobucket.com/albums/uu180/fcjkone/test/154v483G-linx.jpg?t=1264515192

[zalbard]

Nice results! Looks like cherry picked retail Gulftowns should be able to get to 5GHz on water! :D

[kone]

Yes, The 32nm chip very good on the temperature.
This chip can do 4.6G pass linx 50 run on AIR.
Just under Megahalem with GT1400RPM :D

[scgt1]

Where the hell did you get that chip at? I can't find 32nm Xenon chips at the egg. I did a search for intel 1366 and came up with nothing but the older 45 nm process chips.

[KingOfsorroW]

Yo Zalbard, i have 12gb of memory. For how long should I run the test to join the club? )

[zalbard]

Yo Zalbard, i have 12gb of memory. For how long should I run the test to join the club? )
Would be around 2 hours for 20 passes unless your i7 runs @ 6GHz. :rofl:
If you can't manage that long then your system is not stable for the used settings I guess... Try chilled air or pulling out 3 sticks of RAM (assuming you're using 6), such kind of 'cheating' is acceptable. :p:

[KingOfsorroW]

Chilled air is the best option I guess, considering the temps outdoor ))

[trn]

I would expect a 2nd retail stepping of the 32nm process to be monsters. Kone's OC's are very nice but this is an A0 stepping ES. I would speculate that Intel still has more to learn and improve the 32nm (in hexa and quad versions.) Its my own opinion that future 32nm retail steppings will be excelent (based on my own wild-ass-guess!) :D

Oh... and awesome temps for that voltage Kone! :up:


Nice results! Looks like cherry picked retail Gulftowns should be able to get to 5GHz on water! :D

[kone]

I would expect a 2nd retail stepping of the 32nm process to be monsters. Kone's OC's are very nice but this is an A0 stepping ES. I would speculate that Intel still has more to learn and improve the 32nm (in hexa and quad versions.) Its my own opinion that future 32nm retail steppings will be excelent (based on my own wild-ass-guess!) :D

Oh... and awesome temps for that voltage Kone! :up:

That watercool performance not very good. The He120.3 (it is over 5 year rad product :rofl:)
As i say before the 32nm chip very good on the temperature.
I believe can do better than this temps.

[ajaidev]

more update,

4.83G pass linx 50 run on water :rofl:

[IG]http://i645.photobucket.com/albums/uu180/fcjkone/test/154v483G-linx.jpg?t=1264515192[/IMG]

Very good results i could not pass 4.6ghz, your results are great....

Also i am sorry to tell you that the temp reported by ur cpu maybe wrong. These dont show the correct temp and i have been told it will get fixed in B0/B1...

Also i will soon get a B0/B1 and give this test another try... :)

[trn]

Wait... so you can score a 32nm DP Xeon ES but can't manage to scrounge up a better rad? :rofl:

I can manage to get my hands on some non-antique water cooling equipment; please send the chip to me for testing :)


That watercool performance not very good. The He120.3 (it is over 5 year rad product :rofl:)
As i say before the 32nm chip very good on the temperature.
I believe can do better than this temps.

[beast200]

hi

screen shot after a hour of occt

[zalbard]

hi

screen shot after a hour of occt
Hey. :)

This is a LinX stable club, I'm afraid OCCT won't cut it. However, they are very smililar, so I am pretty sure you can pass LinX with the same settings. :up:
You can find a download link for LinX in the first post of this thread.
And please do not downscale your images. Makes them hard to look at, keep them at 100% but crop off the unnecessary bits to reduce the size. :yepp:

[SteveRo]

Good afternoon,

i7-965 at cpuV of 1.6V, cooled by 2xCoolit Boreas in series with GTZ block - c0 stepping needs lots of volts!

http://img192.imageshack.us/img192/1926/45i7965.jpg (http://img192.imageshack.us/my.php?image=45i7965.jpg)

[zalbard]

Good afternoon,

i7-965 at cpuV of 1.6V, cooled by 2xCoolit Boreas in series with GTZ block - c0 stepping needs lots of volts!
Afternoon!
Very impressive for a C0! Welcome to the club! :up:

[SteveRo]

Afternoon!
Very impressive for a C0! Welcome to the club! :up:

This the same mobo, cpu and mem that has me at #2 in the HOF for pcmark vantage -

http://www.futuremark.com/community/halloffame/pcmarkvantage/

[gurusan]

http://img508.imageshack.us/img508/2514/capturele.png

[WaterFlex]

sorry for the offtopic: what the difference between Intel® Core™ i7-960 and Intel® Core™ i7-965 Processor Extreme ?

[zalbard]

sorry for the offtopic: what the difference between Intel® Core™ i7-960 and Intel® Core™ i7-965 Processor Extreme ?
i7 960 = 24 multi, d0. i7 965 = unlocked multi, c0.
@ gurusan: read the requirements, please, you need to post a screenshot with LinX. And yeah, I realise that the programs are very similar.

[SteveRo]

Good evening, Disregard my previous this one is better - slightly higher clock, with voltages (easytune6) and more memory/longer linx run. Still chilled by 2x Boreas in series with GTZ block. -

http://img693.imageshack.us/img693/8827/45betterz.jpg (http://img693.imageshack.us/my.php?image=45betterz.jpg)

[initialised]

4.5GHz ES, 12GB (3x4GB GSkill Ripjaws), P6T Deluxe V2
Air Cooled by Xtreme Gear 1216 B (http://www.buyxg.com/store/item.aspx?id=3384) with Y. S. Tech 8.52W fan (Standard XG 1216B fan 95C)

Vcore 1.625 V applied, 1.568 V CPU-Z

http://farm5.static.flickr.com/4015/4331338714_a80eea5b30_o.gif

I don't recommend these settings for 24/7 use!

Clarkdale next, surprised I haven't seen more of them, 4.5GHz is easy there, they'll do 4GHz on a stock cooler!

[zalbard]

Damn, these Gulftowns run pretty cool. My Bloomfield with 1.6 vCore would produce enough heat to boil a kettle! :D
Makes me want to get one of these baddies. :yepp:
Have you tried uneven multis? Or it doesn't make any difference for i9?

Clarkdale next, surprised I haven't seen more of them, 4.5GHz is easy there, they'll do 4GHz on a stock cooler!
I'm surprised as well.

[initialised]

Damn, these Gulftowns run pretty cool. My Bloomfield with 1.6 vCore would produce enough heat to boil a kettle! :D
Makes me want to get one of these baddies. :yepp:
Have you tried uneven multis? Or it doesn't make any difference for i9?

I'm surprised as well.215x21 and 25x180 are good for 4.5 but I couldn't either it LinX stable, probably due to using 4GB RAM modules or not being enthusiastic enough with the voltage.

1.65V was too much and had temps pushing into the 90s, 1.6V wasn't quite enough.

The only place I've really seen odd Multis making a difference is 191x21 vs 200x20 for a 4GHz OC on i7.

[jcool]

4.5GHz ES, 12GB (3x4GB GSkill Ripjaws), P6T Deluxe V2
Air Cooled
Vcore 1.625 V applied, 1.568 V CPU-Z


I don't recommend these settings for 24/7 use!


Holy crap, damn right I wouldn't :eek:
I had a Westmere-EP die on me at ~1,65V.. on SS and no I wasn't running prime or LinX :rolleyes:

Here's to hoping that my X5660 B0 can handle 4,5G with 1,4-1,45V max (it should) - just need DFI to release a bios that works for B steps...
Or evga to make one for Westmeres, for that matter :rolleyes:

[Telo]

"Read the requirements, please, you need to post a screenshot with LinX. And yeah, I realise that the programs are very similar".

Quick question about the reqs, I know that LinX and at least 2GB are required, but what about the ratio on which the RAM is running? I ask because I'm currently forced to use the newer DDR3 RAM [1.65v] and it does not come close to being able to run at 1900Mhz eventhough it is DDR3-2000 RAM. So, my RAM is running at 1:3.2 Ratio with my 450FSB which equals to 1441Mhz. Let me know if that is not an issue so I don't waste my time looking for/finding the LinX program and running the 20+ passes.

[zalbard]

Don't care about your RAM speed as long as there's at least 2GB installed!

[Telo]

Don't care about your RAM speed as long as there's at least 2GB installed!

Cool beans. I should have the 20+ passes done when I get home tonight.
How long does each pass take approx?

[zalbard]

How long does each pass take approx?
Depends on your CPU and the amount of RAM installed, you can see it on screenshots in LinX window. :)

[Telo]

Ok, SteveRo's PC has 4GB of RAM and it shows it took 129.xx per round; I'm guessing these are seconds. So it should be less than an hour. Thanks.

[SteveRo]

Ok, SteveRo's PC has 4GB of RAM and it shows it took 129.xx per round; I'm guessing these are seconds. So it should be less than an hour. Thanks.

Actually I had 6 installed but ran linX with 4.
And yes -129 should be seconds.

[SteveRo]

Gulftown - 16 March - I'm going to get one if I can.

[imo]

Nice thread Zalbard :up:

Had to lap one of the i7 to get my name registered in your club lol :D

Before

http://img52.imageshack.us/img52/3804/ccccs.jpg

After

http://img33.imageshack.us/img33/4747/lapy.jpg

[imo]

http://img515.imageshack.us/img515/4424/45wow.jpg

[zalbard]

Nice thread Zalbard :up:
Thanks! :)

Had to lap one of the i7 to get my name registered in your club lol :D
And you did a good job at that! 82C @ 4.5GHz on air! :eek:
You have a sick low vCore chip! :yepp:

[imo]

Thanks mate, well what can I say I was inspired by the club and fellow extreme clockers here, yes very nice chip to clock, the main problem was heat , lapping helped about 4-5c drop on load beside the ambient was low aswell about 16c or something lol I love winter ;)

[WaterFlex]

imo
Great job, man :up:

[sRHunt3r]

i7 920 Batch #3938b024 1.3750vcore ht on @ 4515Mhz Swiftech apogee xt water. Still working on 4.6 :)
http://www.straferight.com/photopost/data/795/thumbs/I7_920_LinX20_4515Mhz.jpg (http://www.straferight.com/photopost/showphoto.php/photo/11968)

[Telo]

I'm pretty sure I can do much better than 4.5Ghz, but right now I'm remodeling my house and the only "clean" room is my bedroom and it is hot as hell in there [wife got the heating system in near full blast]; also, I'm playing around using 1.65v DDR3 RAM, that's the reason behind the low RAM speed of 1442Mhz. So without further delay, here is my PC, 4.5Ghz w/ 4GBs of RAM [used 2GB in LinX since it only had just over 3.3GB available] Cooled by WC: DTek CPU block, stock BlackOps NB block, EK HD4870 block, ThermoChill PA120.3 w/ 3 120mm Scythe fans, external 500cc aluminum reservoir, 2x Swiftech MCP355 [I think] coupled by an EK dual top. System BIOS settings: CPU 1.34v, NB 1.40v, VTT 1.25v, RAM 1.64v [my board jacks it up a bit, so I got to fine tune this later]

PS: Let me know if you need me to run LinX with any different settings; but the system is rock solid, as you can see it passed 28hrs 40mins of Orthos before I paused it to do the LinX test.

http://img208.imageshack.us/img208/5987/linx45stable.jpg (http://img208.imageshack.us/i/linx45stable.jpg/)

[zalbard]

Hunter;4230707']i7 920 Batch #3938b024 1.3750vcore ht on @ 4515Mhz Swiftech apogee xt water. Still working on 4.6 :)
http://www.straferight.com/photopost/data/795/thumbs/I7_920_LinX20_4515Mhz.jpg (http://www.straferight.com/photopost/showphoto.php/photo/11968)
Very nice, I'm jealous of such low vCore chips! :D

PS: Let me know if you need me to run LinX with any different settings; but the system is rock solid, as you can see it passed 28hrs 40mins of Orthos before I paused it to do the LinX test.
I've added your data since it doesn't contradict with the rules, but I can just note that the more RAM LinX uses the better, it increases the stress level, so the next time testing for stability rather use the "All" button to use some more of the available RAM, you could've pushed to 2800 or so I think (out of 3300).

[Telo]

I've added your data since it doesn't contradict with the rules, but I can just note that the more RAM LinX uses the better, it increases the stress level, so the next time testing for stability rather use the "All" button to use some more of the available RAM, you could've pushed to 2800 or so I think (out of 3300).

Here is the LinX test done with 3GB:



http://img246.imageshack.us/img246/602/linx45stable2.jpg (http://img246.imageshack.us/i/linx45stable2.jpg/)

[trn]

Nice OC and nice lapping job. I can't quite read the batch #, what is it? I know you had a very nice golden batch 3859B Xeon. That one ought to OC to 4.5GHz+?



Nice thread Zalbard :up:

Had to lap one of the i7 to get my name registered in your club lol :D

Before

http://img52.imageshack.us/img52/3804/ccccs.jpg

After

http://img33.imageshack.us/img33/4747/lapy.jpg

[mattkosem]

Here's my 24/7 3849A895.

--Matt

[moopa]

let me join

i7 920 Batch #: 3927A516

http://img.zuzaa.com/image.php?id=29D4_4B7019AE&jpg (http://img.zuzaa.com/share.php?id=29D4_4B7019AE)

http://img.zuzaa.com/image.php?id=2EC3_4B7019DF&jpg (http://img.zuzaa.com/share.php?id=2EC3_4B7019DF)

[SteveRo]

I just ordered a UD7 and a 3520 - will be putting it under water with apogee XT and 2x boreas in series.
Looking for 4.6 or better by this time next week- we'll see.

[zalbard]

let me join
You're in, congrats on the nice results! :up:

I just ordered a UD7 and a 3520 - will be putting it under water with apogee XT and 2x boreas in series.
Looking for 4.6 or better by this time next week- we'll see.
Let us know how it goes! You have uber cooling, so the results should be great! :D
Are you getting some specific batch?

[Hoss331]

I figured since my original post was done before the required 20+ passes was set I should show another run. Its the same chip just done on my DDR3 setup this time. batch is L827A945


http://i131.photobucket.com/albums/p293/hoss281/1600c6linx2.jpg

[zalbard]

I figured since my original post was done before the required 20+ passes was set I should show another run. Its the same chip just done on my DDR3 setup this time. batch is L827A945.
Updated, thank you. :)
I fixed some minor stuff about the older entries, too. If you want me to add or edit something, just PM. :up:

[SteveRo]

You're in, congrats on the nice results! :up:

Let us know how it goes! You have uber cooling, so the results should be great! :D
Are you getting some specific batch?

Hopefully the egg will send me a good one - I also plan to order a 980 on 16 March.

[imo]

imo
Great job, man :up:

Thanks buddy:)

Nice OC and nice lapping job. I can't quite read the batch #, what is it? I know you had a very nice golden batch 3859B Xeon. That one ought to OC to 4.5GHz+?

Thanks! The lapped i7 batch was 3849A827 out of 2 other same batch this one is cooler and lapping made it coolest :cool: yes the Xeon also does 4.5GHz+ @1.37v One thing I have noticed that same batch CPUs overclocking result is not same even on same setup, Therefore its true "every chip is unique" :yepp:

[adadk]

http://www.f-thirteen.net/adam/LinX20_4600.jpg

Air-cooled with a lapped and washer-modded TRUE.

[Burninator]

this thread makes me drool with jealousy... lol

[c22]

Does my Xeon with just 2C/2T count? :D I can make it 220x21 stable on AIR, but just 2C/2T. Not anymore :)

[zalbard]

Does my Xeon with just 2C/2T count? :D I can make it 220x21 stable on AIR, but just 2C/2T. Not anymore :)
LOL, well, whatever floats your boat! I mean, not like that's much different from accepting a Core 2 Duo user submission. ;)
I'll just mention that you're using just 2 cores out of 4, that's it.
I just hope you aren't using these settings 24/7. :p:

[c22]

Nope, I'm not using it 24/7hahahahah, not even 10% of time on my computer :) Just for spi, but in past It passed 5 runs of linx with max ram used - I think it can pass 20 runs w/o problem :)

[OC Nub]

Picked up an i5-660 yesterday and put it in my P55A UD6. Used 2 sticks of a 3x1gb triple channel kit of Kingston HyperX from my x58.

This was the easiest 4500mhz+ I have ever done, hope this chip doesn't end up on Jor's i5 Graveyard thread.:yepp:

Thank you PangingIII for your help with qpi settings. :up:

http://img697.imageshack.us/img697/766/4600mhzi5660cas7.png (http://img697.imageshack.us/i/4600mhzi5660cas7.png/)

[WaterFlex]

adadk
impressive temps for air :up: Great chip also :)

[zalbard]

This was the easiest 4500mhz+ I have ever done, hope this chip doesn't end up on Jor's i5 Graveyard thread.:yepp:
Good stuff, it's the first Clarkdale in the thread. Added your result! :up:
Off-topic: damn, the list is growing big, haha! :D

[OC Nub]

Good stuff, it's the first Clarkdale in the thread. Added your result! :up:
Off-topic: damn, the list is growing big, haha! :D

Thank You.

[Jor3lBR]

Picked up an i5-660 yesterday and put it in my P55A UD6. Used 2 sticks of a 3x1gb triple channel kit of Kingston HyperX from my x58.

This was the easiest 4500mhz+ I have ever done, hope this chip doesn't end up on Jor's i5 Graveyard thread.:yepp:

Thank you PangingIII for your help with qpi settings. :up:


Oc Nub

Amazing cpu mate! Those ram's speeds are looking great also :up:

[OC Nub]

Oc Nub

Amazing cpu mate! Those ram's speeds are looking great also :up:

Thank you Jor.

[melnd]

plz add me, thanks. 4.510ghz 1.34vcore....24/7

http://i749.photobucket.com/albums/xx138/silentsnip/1415.png

[Badfastbusa]

There is some very impressive overclocks here!

[sjakie666]

@meldn

in your screen i see that you've got hyperthreading disabled... What is the max 25 passes linx run with hyperthreading enabled of your chip???

[zalbard]

plz add me, thanks. 4.510ghz 1.34vcore....24/7
The requirement to join is 20 passes of LinX, not 10. Check the OP. :yepp:
And please do not downscale the image next time if possible. Just crop it and post here so the numbers aren't tiny and the font is actually readable.
Thanks! :)

[SteveRo]

Good morning to you all,

This was not a particularly good W3520 based on what I have seen from others.
I raised cpuv all the way to ~1.65v and could not go any higher than what you see below – please add this to the list, thanks.
Also FYI, this is the same mobo, mem and proc that I used to establish the new PCMark Vantage WR –

http://service.futuremark.com/search/pcmarkvantage.action?product=pcmarkvantage.action&page=&receiver=%2Fajax%2Fsearchresultpcmarkvantage.actio n&doSearch=true&cpuId=&cpuSpeedFrom=&cpuSpeedTo=&logicalProcessors=-100&physicalProcessors=-100&multicore=-100&hyperthreading=-100&gpuId=&gpucorespeedFrom=&gpucorespeedTo=&gpumemoryspeedFrom=&gpumemoryspeedTo=&gpuMemory=-100&shadermodel=-100&cooperativeGpus=-100&operatingsystem=-100

http://img694.imageshack.us/img694/2905/45w3520.png (http://img694.imageshack.us/my.php?image=45w3520.png)

[OC Nub]

^^Your chip may not be golden but your cooling sure did a great job. Nice run.:up::up:

[SteveRo]

^^Your chip may not be golden but your cooling sure did a great job. Nice run.:up::up:

For what I spent I would have been better to go with SS.
2x coolit borias in series with a apogee XT block.
A little better than straight water but only marginally so, see -

http://www.xtremesystems.org/forums/showthread.php?t=217758

More specifically -

http://www.xtremesystems.org/forums/showpost.php?p=3679564&postcount=63

[zalbard]

Good morning to you all,

This was not a particularly good W3520 based on what I have seen from others.
I raised cpuv all the way to ~1.65v and could not go any higher than what you see below – please add this to the list, thanks.

Hello. :)

This is a great result in any case, you've made it into top 10 and also have beaten your previous chip that was worth $1000. Not to mention it got you a WR! So not a bad investment at all. ;)

[SteveRo]

^^Your chip may not be golden but your cooling sure did a great job. Nice run.:up::up:


Hello. :)

This is a great result in any case, you've made it into top 10 and also have beaten your previous chip that was worth $1000. Not to mention it got you a WR! So not a bad investment at all. ;)

Thanks, looking forward to i7-980 on 16March.

[melnd]

add me plz :))))))))))


4.510ghz 1.34vcore!!!!! 1.35 qpi, 1.86 cpu pll, 1.14 IOH, 1.1 ICH
http://i749.photobucket.com/albums/xx138/silentsnip/4520pass.png

http://i749.photobucket.com/albums/xx138/silentsnip/121415.png

http://i749.photobucket.com/albums/xx138/silentsnip/turbo.png

[zalbard]

add me plz :))))))))))


4.510ghz 1.34vcore!!!!! 1.35 qpi, 1.86 cpu pll, 1.14 IOH, 1.1 ICH
Done! :D
Grats, this is one amazing CPU, you're lucky! :yepp:

[melnd]

Done! :D
Grats, this is one amazing CPU, you're lucky! :yepp:

Thank you very much....running at a "Cool" 64*C max 4.013ghz at 1.10 vcore ht on now....

[radaja]

melnd,awesome cpu,plus a great OC with low vcore.do you have HT turned of because of temps?
i bet if temps permit it,you could do that same run with just one notch up on vcore w/HT.

[OC Nub]

add me plz :))))))))))


4.510ghz 1.34vcore!!!!! 1.35 qpi, 1.86 cpu pll, 1.14 IOH, 1.1 ICH


Great run, what is the batch# on your CPU?

[radaja]

3938B020 920 4.510ghz 1.34v(bios) - CPU
it's the one in his sig i think

[OC Nub]

Thanks, Guess I should have seen that, oops.

[JoeBar]

Very nice cpu melnd... :up:

Just wc this bad boy... :D

[zalbard]

There is something I have always wondered about...
45nm i7 s1366.
Once you're stable at low multi and high bclk (let's say 15x220), could increasing the multiplier (let's say to 21x220) require a higher value of CPU PLL and IOH PLL (1.8V for 21x instead of 1.5V for 15x) in case they are undervolted? What are your observations? I cannot seem to find a pattern, my results are inconclusive.

[PiLsY]

New radiators, testing heat load. Alphacomputer 360XT+240XT with 10xD12SM wasn't enough. Now PA120.3 and PA120.2 with 10xZalman F3, 7c lower idle 12c lower load. Could be more in it, chip hates bclk tho and board unstable 192-199bclk. Takes vtt@1.53 to do this bclk with turbo off. Stable @ 4.565 with HT on, I find it faster gaming with HT off though at 4.675ghz (and cooler) so thats my submission :up:. May be an update in the future if I can find the time to push it some more.

http://i169.photobucket.com/albums/u235/matt08071975/Latest%20Pics/4675stable.jpg

[zalbard]

@ PiLsY: Very impressive! You seem to be lucky with your chip, so many people are not fond of their 950s and 960s (and 960s seem to be even worse).
Welcome to the club! :D

[SteveRo]

Good morning Mr. PiLsY,
Wow!
Well done, excellent OC - very impressive indeed!

[PiLsY]

More to come, just need to find the time to do it! That was a run at the same clocks and volts as my 24/7 setup on my old rads to get an idea of the temp difference. I hope I can drop the core volts now so I can drop vtt too. This cpu needs vtt to be close to 0.01v over vcore to stay stable at high clocks. As you can imagine this means temperatures ramp up fast when you add voltage. I've noticed this tendency on all recent D0 cpu's ive had through my hands (last 5 920 chips all made in '09), the earlier '08 D0's were happier with vtt between 0.3v and 0.1v lower than vcore in my experience.

Left it running 24x200 prime blend while Im at work same voltages. I expect it to fail, I just want to see how fast. On my old cooling it could do about 40 minutes. Prime only generates max temps of 67c this time - again approximately 12c lower than before.

CPU details:
3910A470 vid:1.1875v

[angelreaper]

3845A935 Xeon W3520. Cooling Cogage Arrow 2x140 push/pull
http://img163.imageshack.us/img163/1106/4500l20o.jpg
http://img256.imageshack.us/img256/9632/4500loud.th.jpg (http://img256.imageshack.us/i/4500loud.jpg/)

[ChaosAD]

Angelreaper can you make me a favour and try to run linx with problem size set at 25000? I want to check if it makes any difference at the vcore required to be stable. Nice job and great cpu you have there :up:

[beast200]

hi

final got to test with linx

[zalbard]

Nice low voltage submissions, guys! Keep up the good work! :up:

[zsamz_]

here's mine:D
4.6 06no ht
4.5 23with ht
megahalems push pull

i be back:D

[scgt1]

Nice! Whats your batch #?

[ChaosAD]

Sorry but 11500 problem size is very low to stress cpu. Try again with at least 25000 and post back.

[tool_462]

Sorry but 11500 problem size is very low to stress cpu. Try again with at least 25000 and post back.

His CPU might melt if he uses a real problem size :p:

[zalbard]

i be back:D
Yeah, please be back with max memory settings LinX screenshots.

[c22]

here's mine:D
4.6 06no ht
4.5 23with ht
megahalems push pull

i be back:D

From what I heard you claimed it to be 4,6ghz HT ON stable?
That's first point. Second point is, without using at least 4096MB of used ram don't even try, otherwise it's too easy. 7 minutes of testing is nothing, but :banana::banana::banana::banana:.
Try one hour, it will crash :) Don't blame us, you were the one claiming 4,6Ghz ht on stable on air.

[zalbard]

From what I heard you claimed it to be 4,6ghz HT ON stable?
That's first point. Second point is, without using at least 4096MB of used ram don't even try, otherwise it's too easy. 7 minutes of testing is nothing, but :banana::banana::banana::banana:.
Try one hour, it will crash :) Don't blame us, you were the one claiming 4,6Ghz ht on stable on air.
Give him a break, guys. :)
Maybe he'll be back with another submission.

[c22]

Give him a break, guys. :)
Maybe he'll be back with another submission.

Sure. But also sure about that it won't be so called "4,6GHz HT ON". Because that is the case.

[SteveRo]

I hope he does come back I want to see his desktop again!

[johnksss]

http://img100.imageshack.us/img100/5971/linx63run46297.png

[zalbard]

@ johnksss: very nice! :D
What cooling did you use?

[johnksss]

yes, water cooled.
water chiller, i think...i cant remember. and like a dummy, i forgot to put a side note.

ok, i found it..yeah it was a small water chiller and water was at 60F

[zsamz_]

From what I heard you claimed it to be 4,6ghz HT ON stable?
That's first point. Second point is, without using at least 4096MB of used ram don't even try, otherwise it's too easy. 7 minutes of testing is nothing, but :banana::banana::banana::banana:.
Try one hour, it will crash :) Don't blame us, you were the one claiming 4,6Ghz ht on stable on air.


i never claimes i was stable 4.6 ht on ;) learn to read
cpu can prime like its nothin so go find yourself an i7 that will do 4.5 with ht on and try for yourself
maybe 1 day you will:rofl::rofl:
dont hate cause your i7 suks


Zalbard i be ready next time when i get more free time to duct the a/c to the intake fan;)

[zalbard]

Zalbard i be ready next time when i get more free time to duct the a/c to the intake fan;)
LOL, go for it! Taking advantage of the weather isn't a bad idea either.

[zsamz_]

LOL, go for it! Taking advantage of the weather isn't a bad idea either.

it got warm here in the past few days lol
i opened window and still too warm :rofl:
i can do it anytime i got 2 portable 12000btu a/c units:D

[c22]

i never claimes i was stable 4.6 ht on ;) learn to read
cpu can prime like its nothin so go find yourself an i7 that will do 4.5 with ht on and try for yourself
maybe 1 day you will:rofl::rofl:
dont hate cause your i7 suks


Zalbard i be ready next time when i get more free time to duct the a/c to the intake fan;)

Learn to not brag on the forums before you actually did something.
I never tried to have 4,5HT ON, and like I said before: 4,6 HT ON ON AIR is almost impossible. And you were the one claiming you've got that cpu capable of doing it. You failed m8, since I can't see 4600mhz ht on in the pictures.

Actually you don't want me to upload screenshots of an i7 doing 4,8GHz HT ON linx stable that my friend was running on SS. So better don't say "maybe 1 day you will". Instead of that upload your 4,6ghz ht on mr. fail.

[zsamz_]

Learn to not brag on the forums before you actually did something.
I never tried to have 4,5HT ON, and like I said before: 4,6 HT ON ON AIR is almost impossible. And you were the one claiming you've got that cpu capable of doing it. You failed m8, since I can't see 4600mhz ht on in the pictures.

Actually you don't want me to upload screenshots of an i7 doing 4,8GHz HT ON linx stable that my friend was running on SS. So better don't say "maybe 1 day you will". Instead of that upload your 4,6ghz ht on mr. fail.

before you have another brainfart
i never stated i used ht
that was first time i even completed passes linx on ht
so dont start puttin words in my mouth and drop the crackpipe

and if i wanted to do 4.6 with ht i can all i need is proper coolin cause i know the cpu can do it

maybe i should ask god to gimme his linx pass @ 6.0 :rofl:

[zalbard]

Guys, please, take it to PMs.
Thank you. :up:

[snoro]

I am sure i can get my i5 750 to pass linx 20 pass with 12gb of memory at 5ghz with ht on, it might just need alot of ln3

[IFMU]

Chill the attitudes, now.

[dejanh]

Done about 10 days ago quickly...

CPU: Core i7 920 D0, #3849A832, 4650.5MHz (222MHz x 21, 221.5MHz actual), With Vdroop, 1.611V idle, 1.541V load, HyperThreading On, 3987MHz Uncore, 42C idle, 89C load
DRAM: Mushkin Ascent Redline 6GB 6-7-6-18-59-1T 1600MHz kit at 1772MHz, 7-8-7-18-59-1T, DRAM Ratio sub-timings, 1.67V
MOBO: EVGA X58 Classified E759 with EK FC block
GPU: MSI R5850 OC at 1.225V/1000MHz/1250MHz
COOLING: Water with a single HW Labs BI GTX360 cooling CPU, motherboard, and GPU(s), 23C ambient

http://img.techpowerup.org/100226/4650MHz_HT_On_LinX_20X.jpg

[zalbard]

Done about 10 days ago quickly...

CPU: Core i7 920 D0, #3849A832, 4650.5MHz (222MHz x 21, 221.5MHz actual), With Vdroop, 1.611V idle, 1.541V load, HyperThreading On, 3987MHz Uncore, 42C idle, 89C load
DRAM: Mushkin Ascent Redline 6GB 6-7-6-18-59-1T 1600MHz kit at 1772MHz, 7-8-7-18-59-1T, DRAM Ratio sub-timings, 1.67V
MOBO: EVGA X58 Classified E759 with EK FC block
GPU: MSI R5850 OC at 1.225V/1000MHz/1250MHz
COOLING: Water with a single HW Labs BI GTX360 cooling CPU, motherboard, and GPU(s), 23C ambient

Fantastic! :D
Should I update your existing entry in the OP, or would you like me to add one more?

[Movieman]

Learn to not brag on the forums before you actually did something.
I never tried to have 4,5HT ON, and like I said before: 4,6 HT ON ON AIR is almost impossible. And you were the one claiming you've got that cpu capable of doing it. You failed m8, since I can't see 4600mhz ht on in the pictures.

Actually you don't want me to upload screenshots of an i7 doing 4,8GHz HT ON linx stable that my friend was running on SS. So better don't say "maybe 1 day you will". Instead of that upload your 4,6ghz ht on mr. fail.


before you have another brainfart
i never stated i used ht
that was first time i even completed passes linx on ht
so dont start puttin words in my mouth and drop the crackpipe

and if i wanted to do 4.6 with ht i can all i need is proper coolin cause i know the cpu can do it

maybe i should ask god to gimme his linx pass @ 6.0 :rofl:

Ok gentlemen..Lets take a deep breath and remember to treat all as friends ok?
Thanks for listening

[OC Nub]

zsams: Nice LinX runs, very hard to do with air cooling.:up::up:

[dejanh]

Fantastic! :D
Should I update your existing entry in the OP, or would you like me to add one more?

Update existing I guess :shrug: :D

Edit: Nice, #2 with HT On hahahaha, behind the phase guy :D

[newhit]

I still cannot figure out what LinX does or what is the absolute correct test but I hope this is close enough........... Be gentle;).

http://img291.imageshack.us/img291/7591/capture5.th.png (http://img291.imageshack.us/i/capture5.png/)
http://img412.imageshack.us/img412/3501/sdc10936b.th.jpg (http://img412.imageshack.us/i/sdc10936b.jpg/)
http://img535.imageshack.us/img535/2853/capture3me.th.png (http://img535.imageshack.us/i/capture3me.png/)

[zalbard]

I still cannot figure out what LinX does or what is the absolute correct test but I hope this is close enough........... Be gentle;)
You got it all right, mate. :up:
Welcome to the club! :D
Really nice low vCore btw. :yepp:

[ChaosAD]

newhit very nice cpu there. And nice temps also. But isnt 50gflops a little low for 4,6Ghz? :shrug: I get 57+ at 4,4.

[tool_462]

newhit very nice cpu there. And nice temps also. But isnt 50gflops a little low for 4,6Ghz? :shrug: I get 57+ at 4,4.

Very low, that is what I was thinking.

Started it up, been Folding ExtraLarge WU's for a few days so shouldn't have any issues passing LinX. I'll post when it finishes (if I remember to do it today :p:)

http://i136.photobucket.com/albums/q179/tool_462/45linx.png

[newhit]

newhit very nice cpu there. And nice temps also. But isnt 50gflops a little low for 4,6Ghz? :shrug: I get 57+ at 4,4.

Apologies, but I wouldn't know what a high value is or what the problem is or if there is one. I just pressed the required buttons and waited. If there is another test required just let me know.
:up:

These are my settings. Maybe the answer is there (low bclk?, QPI?)

http://www.xtremesystems.org/forums/showpost.php?p=4265674&postcount=790

[PiLsY]

GFlops is very sensitive to memory timings. That looks about right for 8-9-8 or slower @ 1600mhz (or maybe 11/12 @ 2000mhz). I'm guessing you have some auto memory timings :). Check the memory tab on cpuz (or download cpu tweaker for more detailed readings) to see what your timings are at. Linx is much like SuperPi in terms of tweaking memory - higher memory performance can overcome cpu speed in terms of GFlops.

Can we post i3's here? I only ask as its a bit easy to get 4.5ghz on them - wonder if we need a 5ghz club for 32nm? Seen a fair few 6xx series at 5ghz even on air. A good 5xx series seems to top out at about 4.7-4.8ghz. Mine struggles past 4.5 and needs loads of voltage - guess that makes it about average?

[zalbard]

Can we post i3's here? I only ask as its a bit easy to get 4.5ghz on them - wonder if we need a 5ghz club for 32nm? Seen a fair few 6xx series at 5ghz even on air. A good 5xx series seems to top out at about 4.7-4.8ghz. Mine struggles past 4.5 and needs loads of voltage - guess that makes it about average?
Anything that's made by Intel, mate.

[CryptiK]

Any chance we can get the i7 list divided into 'HT on' and 'HT off' groups, since there is a significant difference in the difficulty of one vs the other?

Here's my submission.

Ci7 920 | HT On | 1.320v | 1.290 Vtt | Watercooled

Running 20th loop:

http://i720.photobucket.com/albums/ww206/CryptiKone/Linx20x45GHz1320vrunning.jpg


Finished:

http://i720.photobucket.com/albums/ww206/CryptiKone/Linx20x45GHz1320vfinished.jpg

[MrDucky]

Verry nice CPU :O i wan't one of those :P

[zalbard]

Any chance we can get the i7 list divided into 'HT on' and 'HT off' groups, since there is a significant difference in the difficulty of one vs the other?
I don't think there is much point, is there? Would be splitting the list in waaay too many small parts... I'd have to do the same for Gulftown, i3, etc...
I could also add whether HT is on or off to each submission (in bold) as an option.
What do you guys think? Shall I bother doing either?

[radaja]

CryptiK,thats an awesome OC using such low vcore.
man i wish i had a chip like that to play with:D

[CryptiK]

Verry nice CPU :O i wan't one of those :P

Thanks.


I don't think there is much point, is there? Would be splitting the list in waaay too many small parts... I'd have to do the same for Gulftown, i3, etc...
I could also add whether HT is on or off to each submission (in bold) as an option.
What do you guys think? Shall I bother doing either?

I didn't mean physically divide the list, just noting whether HT was on or off would be fine. I just think it's relevant since it's harder to have HT on. Thanks for your efforts with this club so far :up:


CryptiK,thats an awesome OC using such low vcore.
man i wish i had a chip like that to play with:D

Thanks mate, it's still going strong.

[radaja]

your getting some impressive clocks with it.what board are you using?

[zalbard]

I didn't mean physically divide the list, just noting whether HT was on or off would be fine. I just think it's relevant since it's harder to have HT on. Thanks for your efforts with this club so far :up:
Ah, that's easy, I'll do that in a moment.
Edit: done, enjoy! Hope you like it! :D

Thanks for your efforts with this club so far :up:
You're welcome! :)

your getting some impressive clocks with it.what board are you using?
R2E I believe.

[CryptiK]

your getting some impressive clocks with it.what board are you using?

Yeah Zalbard is right, Rampage II Extreme.


Ah, that's easy, I'll do that in a moment.
Edit: done, enjoy! Hope you like it!

Thanks, it's easier to get a full overview of data now without looking at each submission.

[andressergio]

Any chance we can get the i7 list divided into 'HT on' and 'HT off' groups, since there is a significant difference in the difficulty of one vs the other?

Here's my submission.

Ci7 920 | HT On | 1.320v | 1.290 Vtt | Watercooled

Running 20th loop:

http://i720.photobucket.com/albums/ww206/CryptiKone/Linx20x45GHz1320vrunning.jpg


Finished:

http://i720.photobucket.com/albums/ww206/CryptiKone/Linx20x45GHz1320vfinished.jpg

guess the water cooling bird was right :D
awesome results my friend happy for ya enjoy !!!

cheers:D
sergio

[RoEy]

Sorry to post here in this prestigious thread without screen shots but I’m just curious if people in here have LLC enabled or disabled?

I’m currently at 4ghz, 920 d0, R2E,6gb 3x2 Corsair Dominator 1600.

Bios:
Vcore – 1.275 (1.31 load)
VTT – 1.275
LLC - enabled

Got custom water cooling with a Heatkiller copper (nickel-plated), tfc quad rad and 4870x2 in loop.

Temps at 4ghz under Linx, 67 66 66 62

I just want to know whether it’s better with LLC on or off

How far can I safely push the volts for 24/7? I always thought it was 1.35 for vcore but some of you go way passed that, lol!

I’d love to join this club!

Thanks,

RoEy

[ChaosAD]

Certainly not the right thread to ask something like this. Better try at R2E thread. But your temps seems a little high for 4Ghz with 1.3v.

[zalbard]

Certainly not the right thread to ask something like this. Better try at R2E thread. But your temps seems a little high for 4Ghz with 1.3v.
Hm, in fact, I don't mind, actually.

@ RoEy:
Pretty sure most people run with LLC enabled, but you have to test this by yourself.
Regarding the voltage... Don't be shy, up to 1.5V vCore and VTT should be fine. Just don't fry your chip with high temps.

[ban916]

So no one can get the i5 750 stable huh??

[zalbard]

So no one can get the i5 750 stable huh??
Guess people just don't use really good cooling or really good motherboards with their i5's...