can GTX 360 handle this loop ?

[badboyze]

Hey Guys, Can GTX 360 rad handle a QX9650 (OC'd to 4.0Ghz) and two GTX 285 FTW's in SLI ? i'm planning to use the kaze 3000's in push pull setup.

Do you think i'll need another 240mm rad ? :confused:

I also have a feser 240mm but i dont know where to mount that in the obsedian 800 case :shrug:

[Kylzer]

Depends what brand of rad.

[badboyze]

I bought the GTX 360 from danger den ( it is a HWLabs rad though )

[Chicken Patty]

I bought the GTX 360 from danger den ( it is a HWLabs rad though )

I honestly would leave the cards on air bro, I mean at least me I change cards often so watercooling it will just be a waste.

However now to answer your question, I think it'll be ok. Temps might not be as good as just the CPU, but I think you will still be better off than on AIR. Just do it man. :)

[faster3200]

You should be good. The GTX rads are fantastic with that fan setup. :up:

[Chicken Patty]

You should be good. The GTX rads are fantastic with that fan setup. :up:

Yeah, they love high CFM fans :D

[faster3200]

Yeah, they love high CFM fans :D

Yes they do. With some rough guessing as to the total heat load (is 600w fair?) going based on Martin's charts he would be at <5C delta, which is quite good.

[Chicken Patty]

Yes they do. With some rough guessing as to the total heat load (is 600w fair?) going based on Martin's charts he would be at <5C delta, which is quite good.

see now, if he had an i7, he'd be needing something like a MO-RA :rofl:

But yeah I think that rad will behave good with tall that in the loop, I have a GTX 480 for my i7, and that rad is wonderful man. Honestly, my next rad will be HW Labs :up:

[alacheesu]

It will handle that loop easily with those fans.

[bladechai]

Kaze 3000 in a push pull... this is certainly not going to be quiet....

[badboyze]

Kaze 3000 in a push pull... this is certainly not going to be quiet....

Bladechai : Yes you are right, i have heard them running around 2800rpm and boy they are loud :p:, but i'm more worried about performance .. and those fans are a must to tame GTX 360 beast


It will handle that loop easily with those fans.

alacheesu : Thanks for your input


see now, if he had an i7, he'd be needing something like a MO-RA :rofl:

But yeah I think that rad will behave good with tall that in the loop, I have a GTX 480 for my i7, and that rad is wonderful man. Honestly, my next rad will be HW Labs :up:

Chicken Patty : Thanks for the advice, yes i have heard that many times that i7 will need more rading and probably a separate loop :p: i love my qx9650 :up: so i didn't upgrade my cpu


Yes they do. With some rough guessing as to the total heat load (is 600w fair?) going based on Martin's charts he would be at <5C delta, which is quite good.

faster3200 : thanks for the advice, i think 600W is a good guess.


Yeah, they love high CFM fans :D
Yup! i feel like i'm running 6 turbines when i hear those fans :rofl:


You should be good. The GTX rads are fantastic with that fan setup. :up:
Thanks m8

[badboyze]

Now that I figured GTX 360 alone can handle that loop, do you guys think that a push/pull setup will fit at the top of obsedian ? i hope the top don't fall apart :p: .. i like obsedian because of the cable mang. and the nice black color :yepp: .. any other case would be better for me :confused:

[millertime359]

Now that I figured GTX 360 alone can handle that loop, do you guys think that a push/pull setup will fit at the top of obsedian ? i hope the top don't fall apart :p: .. i like obsedian because of the cable mang. and the nice black color :yepp: .. any other case would be better for me :confused:

There are a couple of build logs with them. I haven't seen anyone with pics of the rad and MB mounted yet though. It might work with a little patience though.

If you had to, you could just mount it out side the case. There are other cases that would have more room, but I'm in the same boat as you. I REALLY like that case. From the photos I have seen so far, it seems really well thought out. :yepp:

[Caoder]

man how thick would a push pull on those rads be O.O;;

[Hondacity]

skinnee's review of the hw gtx 360

http://skinneelabs.com/Radiators/HWLabs/GTX360/GTX360.html

3000 is too noisy...the kaze 2000rpm fans should be adequate....

[Chicken Patty]

i have four of the 2000rpm ones and they are not bad at all. I would get those better.

[badboyze]

Thanks for all the valuable suggestions guys.
Newegg has obsidian 800D in stock now!!
millertime359 - just bought mine now..
I'm thinking of doing a worklog :cool: expect loads of questions guys ..
Thanks all again

[millertime359]

Thanks for all the valuable suggestions guys.
Newegg has obsidian 800D in stock now!!
millertime359 - just bought mine now..
I'm thinking of doing a worklog :cool: expect loads of questions guys ..
Thanks all again

Yet another build log that will make me itch for that case. :(

Good luck. :up: