spajdr
08-01-2009, 03:37 AM
Hello guys,
I made a little watercooling inside my HAF932, at top of the case is mounted Feser Company Xchanger Double (240), on it i use 2x Noctua NF-S12B FLX 1200rpm (100.6 m3/h) (they are at bottom side so it takes hot air from radiator outside computer. Now directly below fans is Noctua U12P SE1366 (like 2-3cm from fans). Is this wrong?
Waterpump is Laing DDC-1T Pump - 12 V with
http://www.alphacool.cz/files/artefacts/4042/xspc_ddcresbig_3.jpg
Waterblock on GPU is EK Water Blocks EK-FC295 GTX SLI.
Now temperatures are idling at 40 and 42C on GPU cores, PCB1 and 2 idling at 32 and 33C, are these temperatures OK? I used Arctic ceramique on Mems and GPU, should i use another one? Under load its mostly 44-45C on both GPUs, thats with vsync ON, OFF its 2-3C more mostly, but that i dont use.
Fittins are 1/4" (11/8mm) + Tygon R3603.
I made a little watercooling inside my HAF932, at top of the case is mounted Feser Company Xchanger Double (240), on it i use 2x Noctua NF-S12B FLX 1200rpm (100.6 m3/h) (they are at bottom side so it takes hot air from radiator outside computer. Now directly below fans is Noctua U12P SE1366 (like 2-3cm from fans). Is this wrong?
Waterpump is Laing DDC-1T Pump - 12 V with
http://www.alphacool.cz/files/artefacts/4042/xspc_ddcresbig_3.jpg
Waterblock on GPU is EK Water Blocks EK-FC295 GTX SLI.
Now temperatures are idling at 40 and 42C on GPU cores, PCB1 and 2 idling at 32 and 33C, are these temperatures OK? I used Arctic ceramique on Mems and GPU, should i use another one? Under load its mostly 44-45C on both GPUs, thats with vsync ON, OFF its 2-3C more mostly, but that i dont use.
Fittins are 1/4" (11/8mm) + Tygon R3603.