XS HWBot Team

[BeepBeep2]

Congratz Dan, awesome news you were accepted to your Masters program.

Sam glad to see you will be benching again, I ended up having to RMA the 3870K, but once it gets back I will test it on an Asus A75 FM1 Pro board, maybe htpc duty lol.

I just score some older Hynix CFR kits, 2133 c9 RipZ and half of a 2400 c9 RipZ kit (I got yours Roy:D) so some CFR binning is in order.
I don't even know why it died lol.
Sorry about that. It was on the stock cooler ><

[Don_Dan]

Massman even made a newspost about hitting 400k views! Check it out! (http://hwbot.org/newsflash/1890_xtremesystems_hwbot_thread_hits_400k_views) :up:

Keep the OC spirit strong, XS, and looking forward to seeing more action from the team!

http://imageshack.us/a/img11/5478/400kviewsnewspost1.jpg (http://hwbot.org/newsflash/1890_xtremesystems_hwbot_thread_hits_400k_views)

http://imageshack.us/a/img51/1395/400kviewsnewspost2.png



Congratz Dan, awesome news you were accepted to your Masters program.

I just score some older Hynix CFR kits, 2133 c9 RipZ and half of a 2400 c9 RipZ kit (I got yours Roy:D) so some CFR binning is in order.

Thanks, I'm very happy! :)
On Saturday I'll be going to the Asus ROG Camp in Berlin, so far it has been a great week and I think Saturday will be no different! :yepp:

Keep me updated on the CFR binning! :up:

[cowie]

Half the world lurks this place :D

[chispy]

Congratulations on this achievement guys :toast: , well done !

[Don_Dan]

I'm back from ROG Camp, it was a perfect combination of delicious food, nice people and great hardware - to make a long story short it was great fun! :)

Asus brought a few M5Es and HD 7970s and five 3770ks. stummerwinter pretested them and chose two for LN2 testing, the other three were pretty crappy ( ~1.45V @ 5GHz 32M ). Originally some setups should have been build using all the components so everyone could try the hardware on air, but SoF and stummerwinter prepared their systems for LN2 and somehow everyone gathered around them. :D
SoF ran GTX 580 triple SLI and stummerwinter tested both CPUs from Asus under LN2, later on he switched to his personal CPU but all three were facing a CB at -120?C, so after switching CPUs, memory and PSU he had to change the board. I was pouring LN2 for SoF on his setup, and apart from some other scores he managed to set a new triple card Unigine Heaven DX9 WR (http://hwbot.org/submission/2344374_sof_unigine_heaven___basic_preset_3x_gefor ce_gtx_580_8305.98_dx9_marks). Well done Chris! :up:

After about two hours of benching SoF had to stop benching and thaw up, so I grabbed a M5E, the three CPUs that were left ( two 3770k and one 3570k ES ) and some memory that Asus brought and tested the chips for their IMC capabilities. We knew we were off to a great start after the first 3770k gave us "23" at 1200MHz. :rofl:
After switching CPUs to the second 3770k I was able to boot 1200MHz but 1300MHz ended in "55". I asked for some of SoF's memory and chose a GeIL 2400 CL11 kit which had Hynix CFR for sure. Switching the memory made booting at 1400MHz possible and also running 32M at that frequency. Trying to boot 1466MHz ended in "23" again, but I got 1449.1MHz through BCLK tuning.
The 3570k was a bit better, booting at 1400MHz was fine and I got 1452MHz through BCLK tuning. After booting at 1466MHz gave me "55" I switched memory again but even with some G.Skill 2600 CL10 with Samsung ICs I wasn't able to boot at 1466MHz. On the 1400MHz divider I got 1450MHz. Neither of the kits was able to boot at CL12. :shrug:

These are all the validations I made:

http://valid.canardpc.com/cache/banner/2650401.png (http://valid.canardpc.com/2650401)

http://valid.canardpc.com/cache/banner/2650399.png (http://valid.canardpc.com/2650399)

http://valid.canardpc.com/cache/banner/2650450.png (http://valid.canardpc.com/2650450)

Thanks to Asus for the great event! :up:

[l0ud_sil3nc3]

I'm back from ROG Camp, it was a perfect combination of delicious food, nice people and great hardware - to make a long story short it was great fun! :)

Asus brought a few M5Es and HD 7970s and five 3770ks. stummerwinter pretested them and chose two for LN2 testing, the other three were pretty crappy ( ~1.45V @ 5GHz 32M ). Originally some setups should have been build using all the components so everyone could try the hardware on air, but SoF and stummerwinter prepared their systems for LN2 and somehow everyone gathered around them. :D
SoF ran GTX 580 triple SLI and stummerwinter tested both CPUs from Asus under LN2, later on he switched to his personal CPU but all three were facing a CB at -120?C, so after switching CPUs, memory and PSU he had to change the board. I was pouring LN2 for SoF on his setup, and apart from some other scores he managed to set a new triple card Unigine Heaven DX9 WR (http://hwbot.org/submission/2344374_sof_unigine_heaven___basic_preset_3x_gefor ce_gtx_580_8305.98_dx9_marks). Well done Chris! :up:

After about two hours of benching SoF had to stop benching and thaw up, so I grabbed a M5E, the three CPUs that were left ( two 3770k and one 3570k ES ) and some memory that Asus brought and tested the chips for their IMC capabilities. We knew we were off to a great start after the first 3770k gave us "23" at 1200MHz. :rofl:
After switching CPUs to the second 3770k I was able to boot 1200MHz but 1300MHz ended in "55". I asked for some of SoF's memory and chose a GeIL 2400 CL11 kit which had Hynix CFR for sure. Switching the memory made booting at 1400MHz possible and also running 32M at that frequency. Trying to boot 1466MHz ended in "23" again, but I got 1449.1MHz through BCLK tuning.
The 3570k was a bit better, booting at 1400MHz was fine and I got 1452MHz through BCLK tuning. After booting at 1466MHz gave me "55" I switched memory again but even with some G.Skill 2600 CL10 with Samsung ICs I wasn't able to boot at 1466MHz. On the 1400MHz divider I got 1450MHz. Neither of the kits was able to boot at CL12. :shrug:

These are all the validations I made:

http://valid.canardpc.com/cache/banner/2650401.png (http://valid.canardpc.com/2650401)

http://valid.canardpc.com/cache/banner/2650399.png (http://valid.canardpc.com/2650399)

http://valid.canardpc.com/cache/banner/2650450.png (http://valid.canardpc.com/2650450)

Thanks to Asus for the great event! :up:


Sounds awesome Dan, wish Asus would do more events in the US though, I feel the last one was ages ago (Sunnyvale).

[Don_Dan]

Sounds awesome Dan, wish Asus would do more events in the US though, I feel the last one was ages ago (Sunnyvale).

Yeah, it was great to meet other overclockers and bench a bit, there should also be a lot more photos coming in the next few days. :up:

This event was hosted for the first time, part one was held in November, part two last weekend. I hope it will be done again in the future. :)

[BeepBeep2]

Nice stuff Dan!

[Don_Dan]

Thanks Sam! :)

[Don_Dan]

Hey George,

You made the news at HWBot! :)

http://imageshack.us/a/img268/4615/hwbotnewsl0udsil3nc3jan.jpg (http://hwbot.org/forum/showthread.php?t=65498)



The article for the Asus ROG Camp is up too. Check out some pics (http://www.pcgameshardware.de/ASUS-ROG-Camp-Event-256432/News/Asus-ROG-Camp-2-Overclocking-Event-1043822/)! ( Click on the second pic where it says "Bildergalerie" )

[Fr3ak]

Seems like I managed to post in the entire wrong section somewhere further up in the forums, so I will C&P the whole thing into this way more suited thread as it seems:

Hello fellow combatants! :D

I know I am probably the most inactive member over at Hwbot, not having uploaded a single score for like 3 years or even more, but my plans are to do some benching every now and then again. Due to several reasons, I just left the team I originally founded and at which I did my part on reaching global #1 a good while ago (team PC Games Hardware that was). Now I joined the team where everything started for me back in the days, XtremeSystems.

Link to my Hwbot profile: http://hwbot.org/user/fr3ak_2/

Due to my lack of infinite money, I am not aiming for one of the top spots, but give me some more time and I will be back in the game of silly numbers and mass destruction of lifetime again :)

On to conquering the universe and beyond! :toast:

Oliver

[Don_Dan]

Welcome back, looks like you've found the right thread now! :D

Don't worry, I've moved your thread to this section too. ;)

[ZenEffect]

for now, im not benching. too much work when Im at home, and right now... im in the Czech Republic on vacation. I will post up my findings for Heaven + AMD/ATi when I get back. Ive found some very interesting "tweaks"

[marcolecorse]

Massman even made a newspost about hitting 400k views! Check it out! (http://hwbot.org/newsflash/1890_xtremesystems_hwbot_thread_hits_400k_views) :up:

Keep the OC spirit strong, XS, and looking forward to seeing more action from the team!

http://imageshack.us/a/img11/5478/400kviewsnewspost1.jpg (http://hwbot.org/newsflash/1890_xtremesystems_hwbot_thread_hits_400k_views)

http://imageshack.us/a/img51/1395/400kviewsnewspost2.png




Thanks, I'm very happy! :)
On Saturday I'll be going to the Asus ROG Camp in Berlin, so far it has been a great week and I think Saturday will be no different! :yepp:

Keep me updated on the CFR binning! :up:
Hello

:D

[Don_Dan]

Hello

:D

Hello Marco! :wave:

[MTP04]

Welcome to the team Oliver!:up:

[Don_Dan]

Hello

:D

Just saw you left the team! :(

[Don_Dan]

Hey guys, please note that the Aquamark3 HWBot Wrapper will be updated soon! (http://hwbot.org/newsflash/1902_aquamark3_hwbot_wrapper_to_be_updated___submi t_your_back_up_scores_before_february_4_2013)

Massman has posted the stages for the next Team Cup:


Everything has been configured, now writing the info for competition pages and announcement. Here's the competition stages:


HWBOT Team Cup 2013



HWBOT Team Cup 2013 - SC1: 1M Challenge

#1: 2000: Coppermine, Tualatin
#2: 2000: Chompers, Sharptooth
#3: 2002: Northwood
#4: 2002: Barton, Thoroughbred
#5: 2004: Gallatin, Prescott (non-64 bit)
#6: 2004: Clawhammer, Winchester
#7: 2006: Conroe (B2), Kentsfield (B2)
#8: 2006: Manchester, Toledo, Windsor
#9: 2008: Bloomfield
#10: 2008: Agena, Toliman
#11: 2010: Gulftown
#12: 2010: Deneb, Thuban
#13: 2012: Ivy Bridge, Sandy Bridge-E
#14: 2012: Llano, Trinity, Bulldozer, Piledriver



HWBOT Team Cup 2013 - SC2: 3DMark03 Single GPU Historical Battle

#1: 2000: Tualatin vs Sharptooth
#2: 2002: Northwood vs Barton
#3: 2004: Prescott vs Clawhammer
#4: 2006: Conroe vs Toledo
#5: 2008: Bloomfield vs Agena
#6: 2010: Gulftown vs Deneb
#7: 2012: Ivy Bridge vs Piledriver



HWBOT Team Cup 2013 - SC3: Vantage Full-out

#1: 2002: Northwood
#2: 2004: Gallatin, Prescott (non-64 bit)
#3: 2004: Clawhammer, Winchester
#4: 2006: Conroe (B2), Kentsfield (B2)
#5: 2006: Manchester, Toledo, Windsor
#6: 2008: Bloomfield
#7: 2008: Agena, Toliman
#8: 2010: Gulftown
#9: 2010: Deneb, Thuban
#10: 2012: Ivy Bridge, Sandy Bridge-E
#11: 2012: Llano, Trinity, Bulldozer, Piledriver



HWBOT Team Cup 2013 - SC4: "Live Performance"

#1: CatZilla
#2: CPU-Z CPU Frequency
#3: SuperPI 32M




The cup is centered around the "highest performance" systems per two years. 35 stags and 4 sub-competitions instead of 42 stages and 6 sub-competitions last year.

Per team you'll need about 14 platforms to compete in all stages. Live performance is about benching in a live audience, additional score verification will be required (to be posted soon), the 3dmark03 stage will be limited to graphics cards that were available in each timeframe.

[BeepBeep2]

When will the next Team Cup be? I'm looking at moving some hardware since I'm low on cash but maybe I'd hold out until the competition.

[Don_Dan]

It will start on February 1st.

Updated stages:


Everything has been configured, now writing the info for competition pages and announcement. Here's the competition stages:


HWBOT Team Cup 2013



HWBOT Team Cup 2013 - SC1: 1M Challenge

#1: 2000: Coppermine, Tualatin
#2: 2000: Thunderbord
#3: 2002: Northwood
#4: 2002: Barton, Thoroughbred
#5: 2004: Gallatin, Prescott (non-64 bit)
#6: 2004: Clawhammer, Winchester
#7: 2006: Conroe (B2), Kentsfield (B2)
#8: 2006: Manchester, Toledo, Windsor
#9: 2008: Bloomfield
#10: 2008: Agena, Toliman
#11: 2010: Gulftown
#12: 2010: Deneb, Thuban
#13: 2012: Ivy Bridge, Sandy Bridge-E
#14: 2012: Llano, Trinity, Bulldozer, Piledriver



HWBOT Team Cup 2013 - SC2: 3DMark03 Single GPU Historical Battle

#1: 2000: Tualatin vs Thunderbird (Nvidia GeForce 2 series, ATI Radeon 8000 series family)
#2: 2002: Northwood vs Barton (Nvidia GeForce 4 series, ATI Radeon 9000 series family)
#3: 2004: Prescott vs Clawhammer (Nvidia GeForce 6 series, ATI Radeon X800 series family)
#4: 2006: Conroe vs Toledo (ATI Radeon X1000 series, Nvidia GeForce 7 series family)
#5: 2008: Bloomfield vs Agena (ATI Radeon HD 4000 series , Nvidia GeForce 200 series family)
#6: 2010: Gulftown vs Deneb (Nvidia GeForce 500 series, ATI Radeon HD 5000 series family)
#7: 2012: Ivy Bridge vs Piledriver (AMD Radeon HD 7000 series, Nvidia GeForce 600 series family)



HWBOT Team Cup 2013 - SC3: Vantage Full-out

#1: 2002: Northwood
#2: 2004: Gallatin, Prescott (non-64 bit)
#3: 2004: Clawhammer, Winchester
#4: 2006: Conroe (B2), Kentsfield (B2)
#5: 2006: Manchester, Toledo, Windsor
#6: 2008: Bloomfield
#7: 2008: Agena, Toliman
#8: 2010: Gulftown
#9: 2010: Deneb, Thuban
#10: 2012: Ivy Bridge, Sandy Bridge-E
#11: 2012: Llano, Trinity, Bulldozer, Piledriver



HWBOT Team Cup 2013 - SC4: "Live Performance"

#1: CatZilla
#2: CPU-Z CPU Frequency
#3: SuperPI 32M




The cup is centered around the "highest performance" systems per two years. 35 stags and 4 sub-competitions instead of 42 stages and 6 sub-competitions last year.

Per team you'll need about 14 platforms to compete in all stages. Live performance is about benching in a live audience, additional score verification will be required (to be posted soon), the 3dmark03 stage will be limited to graphics cards that were available in each timeframe.

[BeepBeep2]

Sweet!
Might have to look at grabbing an HD 5870 for SC2 Deneb. Anyone have a spare sitting around? I'd be happy to pay shipping plus a few.

I've got a 7 GHz 955 so should do well.

[Don_Dan]

There might be some more changes to the stages as the hardware limitations are still discussed at the HWBot forum. I'll make a thread when the limitations are fixed and the competition is listed at the front page.

[Don_Dan]

The stages have been updated again:


Based on the feedback in this thread, I've update the competition requirements. Consider these 99% finished (only official requirements are on the competition page - this is discussion).

SC1 #1: Tualatin -> Coppermine (Tualatin was not available in 2000)
SC1 #7: Kentsfield B2 -> Kentsfield B3, except Q6600 (No Kentsfield B2, Q6600 not available in 2006)
SC1 #8: Manchester, Toledo, Windsor -> Brisbane (G1), Egypt, Italy, Orleans (F2), Windsor, Santa Ana (F2), Santa Rosa (F2) (AM2 and equivalent Opteron platform was highest end available from AMD)
SC2 #1: Tualatin -> Coppermine (Tualatin was not available in 2000)
SC2 #1: Radeon 8000 -> Radeon 7000, except R7500 (Radeon 8000 was not available in 2000, Radeon 7500 was not available either)
SC2 #4: Toledo -> Windsor, no 6000/6400+ (Windsor was competitor of Conroe and AMD's most high-end platform at that time)
SC2 #4: Allow GF8 series, only 8800GTX/GTS640 (both cards were available at the end of 2006)
SC3 #4: Kentsfield B2 -> Kentsfield B3, except Q6600 (No Kentsfield B2, Q6600 not available in 2006)
SC3 #5: Manchester, Toledo, Windsor -> Brisbane (G1), Egypt, Italy, Orleans (F2), Windsor, Santa Ana (F2), Santa Rosa (F2) (AM2 and equivalent Opteron platform was highest end available from AMD)
SC4 #1: Depends on the CatZilla official launch date


The competition stages have been updated as well. This is the list as it is configured right now.


HWBOT Team Cup 2013



HWBOT Team Cup 2013 - SC1: 1M Challenge

#1: 2000: Coppermine
#2: 2000: Thunderbird
#3: 2002: Northwood
#4: 2002: Barton, Thoroughbred
#5: 2004: Gallatin, Prescott (non-64 bit)
#6: 2004: Clawhammer, Winchester
#7: 2006: Conroe (B2), Kentsfield (B3)
#8: 2006: Brisbane (G1), Egypt, Italy, Orleans (F2), Windsor, Santa Ana (F2), Santa Rosa (F2)
#9: 2008: Bloomfield
#10: 2008: Agena, Toliman
#11: 2010: Gulftown
#12: 2010: Deneb, Thuban
#13: 2012: Ivy Bridge, Sandy Bridge-E
#14: 2012: Llano, Trinity, Bulldozer, Piledriver



HWBOT Team Cup 2013 - SC2: 3DMark03 Single GPU Historical Battle

#1: 2000: Coppermine vs Thunderbird (Nvidia GeForce 2 series, ATI Radeon 7000 series family)
#2: 2002: Northwood vs Barton (Nvidia GeForce 4 series, ATI Radeon 9000 series family)
#3: 2004: Prescott vs Clawhammer (Nvidia GeForce 6 series, ATI Radeon X800 series family)
#4: 2006: Conroe vs Windsor (ATI Radeon X1000 series, Nvidia GeForce 8 series family)
#5: 2008: Bloomfield vs Agena (ATI Radeon HD 4000 series , Nvidia GeForce 200 series family)
#6: 2010: Gulftown vs Deneb (Nvidia GeForce 500 series, ATI Radeon HD 5000 series family)
#7: 2012: Ivy Bridge vs Piledriver (AMD Radeon HD 7000 series, Nvidia GeForce 600 series family)



HWBOT Team Cup 2013 - SC3: Vantage Full-out

#1: 2002: Northwood
#2: 2004: Gallatin, Prescott (non-64 bit)
#3: 2004: Clawhammer, Winchester
#4: 2006: Conroe (B2), Kentsfield (B3)
#5: 2006: Brisbane (G1), Egypt, Italy, Orleans (F2), Windsor, Santa Ana (F2), Santa Rosa (F2)
#6: 2008: Bloomfield
#7: 2008: Agena, Toliman
#8: 2010: Gulftown
#9: 2010: Deneb, Thuban
#10: 2012: Ivy Bridge, Sandy Bridge-E
#11: 2012: Llano, Trinity, Bulldozer, Piledriver



HWBOT Team Cup 2013 - SC4: "Live Performance"

#1: CatZilla
#2: CPU-Z CPU Frequency
#3: SuperPI 32M

[l0ud_sil3nc3]

3227C383

strong IMC (2800+) and works well with BBSE and tight timings, but core is poor

http://i.imgur.com/JSSJpPL.jpg (http://imgur.com/JSSJpPL)

http://i.imgur.com/ecGx3tw.jpg (http://imgur.com/ecGx3tw)

http://i.imgur.com/La6xkpx.jpg (http://imgur.com/La6xkpx)

http://i.imgur.com/Itiw6tq.jpg (http://imgur.com/Itiw6tq)

not sure why 3D efficiency is so off.

[Don_Dan]

Wow, she's a keeper! :D

[G.Foyle]

Got a HD 5870 capable of 1300/1350 at least, and a Phenom 560 capable of 6400+ 3D - I'll definitely be doing that!

I think I might still have my decent gulftown (6500 for AM3), but I'd have to find someone willing to borrow me a R3BE.

[Don_Dan]

Got a HD 5870 capable of 1300/1350 at least, and a Phenom 560 capable of 6400+ 3D - I'll definitely be doing that!

I think I might still have my decent gulftown (6500 for AM3), but I'd have to find someone willing to borrow me a R3BE.

Sounds great, maybe you could run some 1M too.

I have no idea about the time frame of the different stages yet, the competition page is not up. Depending on the time frame I'll be able to take care of the Conroe/Kentsfield stage, but since Q6600 is excluded it will just be a Conroe stage for me. :D

[ZenEffect]

what was your max cpu freq george?

mabye i should sell my cpu... 2800+ imc and 6.8+ core.

[Dumo]

Can you resurrect your MVE Zen?

Pretty soon all 3770K with good core/imc will flood the f/s thread just like those 2600K days. Lol

[l0ud_sil3nc3]

what was your max cpu freq george?

mabye i should sell my cpu... 2800+ imc and 6.8+ core.

sofos did 6.9 1M (1c 1t) and 6820 32m (2c 2t) on Asus.

How much are you thinking for your chip?

[aussie-revhead]

Pretty soon all 3770K with good core/imc will flood the f/s thread just like those 2600K days. Lol

Yep so you guys should be selling now, beat the rush. Haswell is just around the corner so it may be too late already (to sell for good money that is)

:)

[Crabby]

Hello fellow ocers! I've been lurking here long enough and thought it was a great time to join in the fun. I just joined the team and wanted to say hello and I hope to learn a lot more about benching. Thanks for all the past and future help!

[Don_Dan]

Welcome on board, Crabby! :welcome:

[l0ud_sil3nc3]

Hello fellow ocers! I've been lurking here long enough and thought it was a great time to join in the fun. I just joined the team and wanted to say hello and I hope to learn a lot more about benching. Thanks for all the past and future help!

Welcome:welcome:

[Don_Dan]

The competition details for the Team Cup 2013 are online! (http://hwbot.org/competition/team_cup_2013/)

The competition background can be found here. (http://i.imgur.com/XPidgxL.jpg) :up:

[l0ud_sil3nc3]

Got Vista working pretty well, and it seems the new beta drivers are pretty good:)

580
http://i.imgur.com/gtZhZxJ.jpg (http://imgur.com/gtZhZxJ)
680
http://i.imgur.com/u4LtJAM.jpg (http://imgur.com/u4LtJAM)

http://i.imgur.com/Dsn8MRH.jpg (http://imgur.com/Dsn8MRH)

http://i.imgur.com/wKfhge9.jpg (http://imgur.com/wKfhge9)

had to drop a multi for the 580 run as things were getting a bit wet and and I lost some mhz.

[Don_Dan]

Great scores mate! You broke 800 points for the first time too and you're now closing in on the Top 50! :up:

[l0ud_sil3nc3]

Great scores mate! You broke 800 points for the first time too and you're now closing in on the Top 50! :up:

thanks Dan, trying to catch Steve is going to be a chore:)

[Crabby]

Thanks for the welcomes and nice scores loud!

[Don_Dan]

The new AM3 Wrapper has ben released. Download now from HWBot! (https://s3-eu-west-1.amazonaws.com/hwbotdownloads/downloads/benchmarks/HWBOT_aquamark_v.2.22.exe) :)

[Don_Dan]

Small update for the AM3 Wrapper to version 2.23! (https://s3-eu-west-1.amazonaws.com/hwbotdownloads/downloads/benchmarks/HWBOT_aquamark_v.2.23.exe)

[Splave]

nice runs l0ud

[l0ud_sil3nc3]

nice runs l0ud

thanks Splave, I am still a complete noob when it comes to clocking these cards, as the clocks went up the scores went down lol

[Don_Dan]

I've posted a thread for the Team Cup 2013. (http://www.xtremesystems.org/forums/showthread.php?285018-HWBot-Team-Cup-2013)

[Don_Dan]

http://imageshack.us/a/img401/101/topscores18thfebruary20.jpg

Thanks to Warboy, Ace123 and ToKu for their submissions! :up:

[Don_Dan]

Late birthday present for myself: :)

http://imageshack.us/a/img72/7411/cellshock1800d9gtr1.jpg

Sorry for the bad pic! :D

[Dumo]

Gotta dust it off and play with this one:)

http://img543.imageshack.us/img543/5009/screenshot155b.png

[Don_Dan]

CSX Diablo 2000 CL9! :clap: :up:

Going for 1200MHz 7-6-5 @ 2.4V under LN2? :D

[Don_Dan]

Please voice your opinion about how scores should receive points in case of a tie. (http://hwbot.org/forum/showthread.php?t=69538)

[Movieman]

Please voice your opinion about how scores should receive points in case of a tie. (http://hwbot.org/forum/showthread.php?t=69538)
Voted..#1 option, leave it as it currently is

[trans am]

Voted..#1 option, leave it as it currently is

1 is my vote. or method 3. you take the highest clock from each member and have the 2 top members of each team and have a live vid cam stream of them cleaning off all the insulation and conformal etc off the boards and check with a blacklight to make sure all the residue is off. then they have to send their board back to rma replacements. the guy that gets his replacement board back from the rma 1st wins the contest.

[BeepBeep2]

knock knock...who's there?

New HWBOT Rev? What? I'm out of the loop.

[Don_Dan]

The biggest change was the replacement of the Pro-OC League by the Pro OC Cup (http://hwbot.org/forum/showthread.php?t=63570). There is also a poll to bring back the Pro OC League (http://hwbot.org/forum/showthread.php?t=70149).

[Don_Dan]

Happy Pi Day! :up:

[Don_Dan]

Happy Easter! :)

[Movieman]

added a few points to the team today:
http://hwbot.org/submission/2371182_movieman_wprime___32m_2x_xeon_e5_2687w_2se c_308ms?recalculate=true

[Don_Dan]

Nice work, Dave! :up:

[l0ud_sil3nc3]

You nailed it Dave, nice wr!

[Crabby]

That is one heck of a sys you have, well done! :clap:

[Movieman]

Thanks guys, trying to get the 1024m record but I'm using win7-64 Ultimate and I see the top 2 guys using Vista Ultimate and win2K8 server
Asked around last night and those are better????? Any info??

[Planet]

Dave use Server 2k8 non R2 it is a stripped version of Vista. You will probably have to go to the System Properties then to the Advanced Tab and then Performance and then Advanced tab and make sure it is set to adjust for best performance of applications and not background

[Movieman]

Dave use Server 2k8 non R2 it is a stripped version of Vista. You will probably have to go to the System Properties then to the Advanced Tab and then Performance and then Advanced tab and make sure it is set to adjust for best performance of applications and not background

Yup, Thanks..Downloading it now.,.:up:

[Movieman]

Not a lot for this but a little anyway:
http://hwbot.org/submission/2371421_movieman_ucbench_2011_2x_xeon_e5_2687w_342 9.9_mpt_score?recalculate=true
One way or the other I'll get the wPrime 1024M record by next week or you'll hear stories about this old guy pulling out what little hair he has left! :D

[l0ud_sil3nc3]

^ On a roll Dave, great job!

[Movieman]

^ On a roll Dave, great job!
I'm trying!:rofl:

[Don_Dan]

Nice UCBench score! :)

I noticed you were running 36x100MHz on your older scores, and now you're running 34x106MHz. Is ~ 3600MHz the limit of the chips?

[Movieman]

Nice UCBench score! :)


I noticed you were running 36x100MHz on your older scores, and now you're running 34x106MHz. Is ~ 3600MHz the limit of the chips?
Chips themselves are limited to a 34 multi on all cores, 36 on 4 cores, 38 on 1-2 cores.
On the older scores I was limited to 100BCLK..This board has settings to 106BCLK
The screen shots could vary due to EIST( speed step) at the time they were taken.
Wait till late next week..I have a new bios coming..

[BeepBeep2]

FX-8120 planned for this week, thanks for Daveburt716 for sending it :)
Early batch (release), runs hot, goes fast with not so much voltage...seems like a good candidate for LN2, I have an itch for 8 GHz and faster DDR3 speed...

Also 565 BE, wPrime 32M/1024M 3 core global points.

Got some more points for the team today with my 955, also missed 1st place 32M by 1 second :(

I broke top 400 for Xtreme OC league...

[Don_Dan]

Chips themselves are limited to a 34 multi on all cores, 36 on 4 cores, 38 on 1-2 cores.
On the older scores I was limited to 100BCLK..This board has settings to 106BCLK
The screen shots could vary due to EIST( speed step) at the time they were taken.
Wait till late next week..I have a new bios coming..

I see, I didn't know that the multi was different for the number of cores.


FX-8120 planned for this week, thanks for Daveburt716 for sending it :)
Early batch (release), runs hot, goes fast with not so much voltage...seems like a good candidate for LN2, I have an itch for 8 GHz and faster DDR3 speed...

Also 565 BE, wPrime 32M/1024M 3 core global points.

Got some more points for the team today with my 955, also missed 1st place 32M by 1 second :(

I broke top 400 for Xtreme OC league...

Your 955 scores are among the fastest scores ever made on AMD:

1M:

http://imageshack.us/a/img507/8716/beepbeep2top10amd1m.jpg

32M:

http://imageshack.us/a/img194/6825/beepbeep2top5amd32m.jpg

Great scores and nice benching! :up:

[BeepBeep2]

Thanks Daniel :)

Determined to find a 7+ GHz 965...they are about $90 a piece for me brand new, I'll have to buy a few.

[Don_Dan]

After many hours of benching and a few hours of sleep these are my scores from the Awardfabrik Team Session last weekend. You can find pics and more scores in SoF's thread (http://www.xtremesystems.org/forums/showthread.php?285808-AwardFabrik-amp-friends-team-session-Haiger-04-2013-1200L-LN2-tons-of-hardware), I'll post my screenshots over there as well. I'll just post the HWBot links here:

E8600:
CPU-Z (http://hwbot.org/submission/2373803_don_dan_cpu_frequency_core_2_e8600_%283.33 ghz%29_6403.44_mhz) #94
1M (http://hwbot.org/submission/2373813_don_dan_superpi___1m_core_2_e8600_%283.33g hz%29_7sec_391ms) #181
32M (http://hwbot.org/submission/2373814_don_dan_superpi___32m_core_2_e8600_%283.33 ghz%29_7min_49sec_875ms) #44
PiFast (http://hwbot.org/submission/2373807_don_dan_pifast_core_2_e8600_%283.33ghz%29_ 15_sec) #83
UCBench (http://hwbot.org/submission/2373815_don_dan_ucbench_2011_core_2_e8600_%283.33g hz%29_688.6_mpt_score) #1
WPrime 32M (http://hwbot.org/submission/2373816_don_dan_wprime___32m_core_2_e8600_%283.33g hz%29_13sec_671ms) #118
WPrime 1024M (http://hwbot.org/submission/2373817_don_dan_wprime___1024m_core_2_e8600_%283.3 3ghz%29_452sec_78ms) #80

The UCBench score is not only a category record but also ranked 7th compared to all dual cores at HWBot.

http://imageshack.us/a/img842/1549/bestdualcoreucbench1404.jpg

E6600:
CPU-Z (http://hwbot.org/submission/2373818_don_dan_cpu_frequency_core_2_e6600_%282.4g hz%29_5104.52_mhz) #41
1M (http://hwbot.org/submission/2373832_don_dan_superpi___1m_core_2_e6600_%282.4gh z%29_10sec_47ms) #44 <- Team Cup
32M (http://hwbot.org/submission/2373827_don_dan_superpi___32m_core_2_e6600_%282.4g hz%29_10min_1sec_203ms) #11
PiFast (http://hwbot.org/submission/2373823_don_dan_pifast_core_2_e6600_%282.4ghz%29_1 9.02_sec) #23
UCBench (http://hwbot.org/submission/2373819_don_dan_ucbench_2011_core_2_e6600_%282.4gh z%29_534.4_mpt_score) #1
WPrime 32M (http://hwbot.org/submission/2373829_don_dan_wprime___32m_core_2_e6600_%282.4gh z%29_18sec_531ms) #101
WPrime 1024M (http://hwbot.org/submission/2373828_don_dan_wprime___1024m_core_2_e6600_%282.4 ghz%29_599sec_531ms) #74

E8200:
CPU-Z (http://hwbot.org/submission/2373724_don_dan_cpu_frequency_core_2_e8200_%282.67 ghz%29_4924.72_mhz) #41
1M (http://hwbot.org/submission/2373778_don_dan_superpi___1m_core_2_e8200_%282.67g hz%29_9sec_875ms) #45
32M (http://hwbot.org/submission/2373781_don_dan_superpi___32m_core_2_e8200_%282.67 ghz%29_10min_7sec_485ms) #17
PiFast (http://hwbot.org/submission/2373770_don_dan_pifast_core_2_e8200_%282.67ghz%29_ 20.7_sec) #40
UCBench (http://hwbot.org/submission/2373785_don_dan_ucbench_2011_core_2_e8200_%282.67g hz%29_514.4_mpt_score) #1
WPrime 32M (http://hwbot.org/submission/2373789_don_dan_wprime___32m_core_2_e8200_%282.67g hz%29_18sec_922ms) #54
WPrime 1024M (http://hwbot.org/submission/2373796_don_dan_wprime___1024m_core_2_e8200_%282.6 7ghz%29_605sec_15ms) #40

Benching after such a long hiatus was great fun, thanks a lot to the Awardfabrik crew for inviting me! :toast:

Not only did I gain a lot of team points, I improved my rank as well:

http://imageshack.us/a/img706/7701/rankingpointsbefore1404.jpg

http://imageshack.us/a/img843/8567/rankingpointsafter14042.jpg

444 places gained. Not bad. :D

http://imageshack.us/a/img198/2825/rankinginternationalaft.jpg

[l0ud_sil3nc3]

^flucking beast Dan, was just looking at your sig and thinking wow somebodies been benching:D

[MTP04]

Nice benching Dan! Good to see you back at it.:)

[Don_Dan]

Just thought I should share my UCBench scores since all of them are #1 in their respective category:

http://imageshack.us/a/img819/8002/e8600ucbench6252mhz.jpg

http://imageshack.us/a/img842/4381/e6600ucbench4918mhz.jpg

http://imageshack.us/a/img208/4500/e8200ucbench4721mhz.jpg

The E8600 was doing okay, though I'm about 100 - 150 MHz off from what the pre-owner did. Not sure if the board or I am to blame here, probably me since the board has done higher FSB speeds with the E8400. -.-
The E6600 was much better than expected, I already knew it was a good chip and I had promised the pre-owner to try for 5 GHz under LN2, in the end I could do 1M at 5 GHz and validate at 5.1 GHz.
I bought the E8200 on ebay recently, without much pretesting I quickly checked the max FSB and it did ~600 MHz on air, but on LN2 it turned out to be a rather bad chip, I could only validated 8 x 615 MHz once and all the benchmarks had to be run much lower. CB at -105?C and CBB at -95?C didn't make it any better... :(

And a pic of my setup:

http://imageshack.us/a/img5/8620/setupbildsessioninlange.jpg


^flucking beast Dan, was just looking at your sig and thinking wow somebodies been benching:D


Nice benching Dan! Good to see you back at it.:)

Thanks guys! :)

David, I saw you put the FX-55 under LN2, did you run any other benchmarks?

[Crabby]

21 submissions worth 208.9 points, dang!

[MTP04]

I ran 3DMark03 as well but nothing worth submitting. What temps were you using for the E6600 runs?

[Don_Dan]

CB on the E6600 was at -135?C idle, -140?C heavy load, I tried to keep it around -130?C most of the time. CBB at -125?C.

[MTP04]

That CBB is nice and low. One of my good e8600's has a sweet spot at around -140 but has a CBB of like -60 lol. Its a pain to warm it up just to get it going again and then pull the temp back down. The chips worth it though.

[Don_Dan]

A CCB at -60?C sounds like a major pita, my E8600 coldbugs at -145?C and boots at -135?C, but doesn't clock as well as yours. Can't have everything I guess. :D

Two more pics of my setup thanks to Christian from Asus:

http://imageshack.us/a/img855/3249/afsession0420130007.jpg

http://imageshack.us/a/img32/9110/afsession0420130009.jpg

[MTP04]

Nice clean setup Dan.:up:

[Don_Dan]

Thanks mate, the other overclockers teased me for keeping it that clean and putting all the items I don't need back in their respective boxes, but it helps me to stay focused. :D

[l0ud_sil3nc3]

love clean setups and that is one clean setup Dan!

[Don_Dan]

Thanks George!

[Don_Dan]

l0ud_sil3nc3 is benching for the MOA qualifier:

http://imageshack.us/a/img713/8741/topscores22ndmay2013.jpg

[Don_Dan]

Dumo joined our team this morning. Welcome on board, Roy! :welcome:

[Dumo]

Thanks Don:up:

[Movieman]

Well, about time!:rofl:

[ZenEffect]

welcome Roy!

[l0ud_sil3nc3]

Awesome to hear this news Roy, glad you are part of team XS:)

[trans am]

Roy boy!

[l0ud_sil3nc3]

uh oh

http://hwbot.org/submission/2384473_l0ud_sil3nc3_superpi___32m_core_i5_3570k_4 min_55sec_672ms

[Don_Dan]

Still on the MPower?! :D

[Dumo]

Thanks for the welcome guys:up:

Congrats L0ud:up:

[l0ud_sil3nc3]

Still on the MPower?! :D

Yes unfortunately


Thanks for the welcome guys:up:

Congrats L0ud:up:

thanks Roy, hopefully it is enough to get to the next round.

[ZenEffect]

Congrats to George for making it to the next round!

[l0ud_sil3nc3]

^thanks Davis I just hope we get a cold slow bios for the 7790, kinda sucks benching at -2c:rolleyes:

[Crabby]

Awesome job your doing l0ud_sil3nc3!!!!

[Don_Dan]

Yesterday two competitions ended. The Pro OC Cup Q2'13 (http://hwbot.org/competition/pro_oc_cup_q213/) ended with KPC Pro OC and KPC Pro OC #2 ranking 1st and 2nd and KRONOS PRO OC completing the Top 3. In the MOA qualifier (http://hwbot.org/competition/moa_am_2013_bqual/) our member l0ud_sil3nc3 won the Americas qualifier, winning all three stages and reaching 100 of 100 points. Well done! :up:

[ZenEffect]

George, just remember if you switch AB versions I have to re-do the thing.

[Don_Dan]

Is anyone interested in forming a Pro OC Team? Registration is open again for the new season.

[l0ud_sil3nc3]

So killed my first Haswell within 5 hours, swapped it and got this junk in return.

L312B332

http://hwbot.org/submission/2386629_

http://i.imgur.com/QqZ88vy.png (http://imgur.com/QqZ88vy)

[Don_Dan]

Sorry to hear about your loss!

What was Vcore like when it died? I thought Haswell was resilient to high Vcore, as Andre and fredyama have shown with their results...

[l0ud_sil3nc3]

2.2vcore and 2.9 input, I got a bit generous with the volts lol

The cpu was good though, 1.28v for 5Ghz 32M stability is solid, should have been at least a 6.5Ghz chip:(

[Don_Dan]

6.5 GHz would have been pretty nice, but I'm sure you'll find a better one.

I just read that Dumo has killed his first chip as well, this is not good... :(

[l0ud_sil3nc3]

6.5 GHz would have been pretty nice, but I'm sure you'll find a better one.

I just read that Dumo has killed his first chip as well, this is not good... :(

We both killed them the same night lol, called Roy and was like I think I did something stupid:D

Stuck on 78, and so was he except he used sane voltages and water, while I used LN2 and not so safe voltages, so not quite sure what the true cause was.

[Don_Dan]

Points have been enabled for Fire Strike Extreme: (http://hwbot.org/newsflash/2082_points_enabled_for_fire_strike_extreme_%28wr_ global_and_hardware%29)


Another small post-Computex news article to inform you that the 3DMark Fire Strike Extreme benchmark can be benched for HWBoints from June 8, 2013. The benchmark has been enabled for world record, global and hardware points. Enabling points for the benchmark follows on a poll we held amongst members to which most responded positively.

Good luck all!

[cstkl1]

Just saw ure thread. Same here. But my voltages were all low n aircooling
4.5ghz core n uncore at bclk 125@1.2365v each& 2250 7-10-7-28@1.65v-1.67v &Vccin 1.95v.
No issue on bios 0503. Ran same timings last week. Happened on 0017.

Suspect bios with vccin n vttddr.
Before on 2133 i could run it at 1.75v with 0.75v to 0.8v on vttddr
On bios 0017 was 1.9v n 0.8.
So according to log change whatever vttddr bugfix. Was not a fix

Bios 0503 vs 0017

[Don_Dan]

^

What does this refer too? :)

[l0ud_sil3nc3]

^

What does this refer too? :)

Dead shee pee uuu

[Don_Dan]

I assumed that's what it was but I wasn't sure, thanks.

[Don_Dan]

HWBot is facing some problems at the moment, if your profile is missing points or if your scores aren't receiving any points, please let me know.

[BeepBeep2]

"I'll be back."
...shortly.

[Don_Dan]

HWBot is running two competitions this month:

ALLBenchmark July OC Relaxation Contest (http://hwbot.org/competition/allbenchmark_contest/)


Those who have a good memory will remember that almost a year ago, around October 2012, we posted the news of the coming of a new benchmark named Catzilla. The ambitious project of creating a benchmark that should compete with Futuremark's 3DMark lasted longer than anyone expected. It turns out it's not that easy to get a completely new benchmark off the ground. At HWBOT, we were and still are very excited about the benchmark now called "ALLBenchmark". Without having tested too much, it seems to be a 3D benchmark with a lot of influence from system components such as storage and memory. We called it the Aquamark of this generation, referring to the competition it brings to the 3DMark series. Originally, the plan was to integrate the ( Catzilla ) ALLBenchmark submissions directly with our site, using our benchmark API functionality. However, that turned out to be a troublesome process.

But we are not yet ready to give up on this benchmark!

Over the past weeks, the staff has been discussing on how to move forward with the benchmark. Both the HWBOT and ALLBenchmark team spent a lot of effort on trying to get the integration to work and giving up on it would mean the loss of so much effort. However, if something does not work out as you want it to work, it is sometimes better to cut your losses and move on. That is exactly what we did. We cleaned up the backend of the benchmark submission code and prepared the following four presets for submission:

ALLBenchmark - 576p (Kitty)
ALLBenchmark - 720p (Cat)
ALLBenchmark - 1080p (Tiger)
ALLBenchmark - 1440p (Catzilla)

Currently none of the four presets will generate points, but we will be closely monitoring the activity rate as well as the feedback from the community on the consistency of the benchmarks. As it requires a paying subscription to run any other preset than the 576p (previously Kitty), this will be the priority preset if we enable points for the benchmark. The rules for the benchmarks have been updated as well; you can find them here.

As a celebratory gesture to get the benchmark going at HWBOT, we have set up a small relaxation competition with ALLBenchmark for this month. The different stages all have their own easy-going limitation and should bring a nice challenge to everyone who wants to play something new. The stages are:

#1: 576p (Kitty) Single GPU
#2: 576p (Kitty) AMD CPU
#3: 576p (Kitty) IGP
#4: 576p (Kitty) Dual Core CPU
#5: 576p (Kitty) Top Score

Intel XTU Overclocking Challenge (http://hwbot.org/competition/xtu_contest/)


To celebrate the launch of the XTU project cooperation between Intel? and HWBOT, we are hosting the first ever XTU overclocking competition in July. The competition consists of two parts: a desktop contest, and a mobile contest. To participate, download the Intel? XTU software application, install it on your Ivy Bridge or Haswell system, run the benchmark, and submit your score. Easy!

Once you have run the benchmark, you can enter the competition by either clicking Compare in the XTU benchmark application or saving the file to submit manually later. If you choose to submit directly from the XTU application, make sure to choose Compete when uploading the result to HWBOT. If you want to save your benchmark file to submit later, check out the how-to guide on the forums (click). Note that the last step is a little bit different, as you want to submit to the competition and not the general rankings.

________________________________________


"I'll be back."
...shortly.

Goooooooooood. :)

[Hondacity]

Capt DON_DAN grats on the hwbot post!

DAVE is still benching!

George Man! MOA Qualifier congrats! Glad my dewars are being used :D

DUMO welcome aboard man!

[Dumo]

What's up Honda?:)

[l0ud_sil3nc3]

Capt DON_DAN grats on the hwbot post!

DAVE is still benching!

George Man! MOA Qualifier congrats! Glad my dewars are being used :D

DUMO welcome aboard man!

Has a ghost appeared:eek:

Dude have not heard from you in like a year, hope all is well wherever you are:yepp:

[runmc]

Hello my brother! - It's good to see you around again. I hope life has been treating you well. :)

[Don_Dan]

Welcome back, Robert! :welcome:

[ZenEffect]

What up Rob!

[Don_Dan]

Nice going by Ace123! :up:

http://imageshack.us/a/img14/3695/1epk.jpg

[Don_Dan]

G.Foyle is benching again! :cheer:

431257 points (http://hwbot.org/submission/2407396_xoqolatl_aquamark_radeon_hd_7970_431257_ma rks) in Aquamark3 with a 4670K @ 5800MHz and a 7970 @ 1000/1450MHz.

http://img.hwbot.org/u13804/image_id_999670.jpeg

[Crabby]

Wearing a wicked ass shirt too! :yepp: Sorry don't know you but I'm glad your benching again!

Edit: I do recognize the avatar though, welcome back!

[Don_Dan]

Welcome to the team, 3LFK1NG! :welcome:

[Crabby]

:clap: Welcome to the team!

[BeepBeep2]

Well well well, I have my upcoming college semester paid for and taken care of!
Maybe I'll be able to get a little benching in around a week from now!

Quick question, should any old 4670K on LN2 take care of 3D01/03/Aqua/05/06 on midrange cards?

[Don_Dan]

Good to see you again, Sam! :)
Which midrange cards are you thinking of exactly? Should be fast enough I guess, even at safe volts.

_______________________________________

3500th post! :party:

[BeepBeep2]

Congrats on your 3,500th post! :p:

Not looking for top end scores, maybe top 10 air per card would make me happy.
More like low-end, 4890/5770 but I also have 6950, 6970s on water and reference 7950s. The higher end stuff is going to go to a new home most likely in a week or two.

I need to send trans_am back his Tek-9 Slim unfortunately having been unable to make use of it.

[Don_Dan]

Thanks! ^^

Good luck for your session! I hope you get a good chip! :up:

[BeepBeep2]

6 year, 3 month old FSP PSU took a dump in my brother's computer overnight.
Which means another one is in order, and I have to pay for it.

Since I don't have enough cash for the hardware now I'll have to wait. trans_am's stuff still hasn't been shipped out either.

[andressergio]

Grats mates !!! i put some extra points this month went first on my country of 87 and 2nd on enthusiast behind ace123 :)

cheers buds !
Sergio

[Don_Dan]

6 year, 3 month old FSP PSU took a dump in my brother's computer overnight.
Which means another one is in order, and I have to pay for it.

Since I don't have enough cash for the hardware now I'll have to wait. trans_am's stuff still hasn't been shipped out either.

That sucks! :(


Grats mates !!! i put some extra points this month went first on my country of 87 and 2nd on enthusiast behind ace123 :)

cheers buds !
Sergio

Ace123 has posted some new scores, you have to push harder for #1 EL on the team! :p: :up:

[l0ud_sil3nc3]

go go go Ace and Andressergio:)

If I ever get tired of 32M I will start subbing again as I have been slacking lately, memory testing taking over lol

[Ace123]

Hey fellas I appreciate the support. I will be making some 7990 submissions soon.

[Don_Dan]

I'm looking forward to your 7990 submissions! :up:

[BeepBeep2]

Good news is, Corsair CX600 I just threw into my brother's PC solved the problem. :)
Also, the PSU was on sale, $63 shipped with $20 MIR. :D

Gonna sell my HD 7950s and go nuts benching here in the future...

OH, by the way, I am in the process of buying the pot pictured to the left from Aaron Schradin. He messaged me a few weeks ago and asked me to ship it to him immediately as he had a buyer, but I was able to buy it instead. Gave him $80 down payment to be able to keep it for now.

[Don_Dan]

Dumo and l0ud_sil3nc3 are both pushing hard on their MFR. Who will be the first to reach 2000 MHz memory clock for Team XS?

http://imageshack.us/a/img94/5192/injl.jpg

[BeepBeep2]

I can't believe how cheap the Z87X-OC is. I'll have to pick one up, and a 4770K :)
BBSE/PSC go very far on this platform? I've got a Patriot 2000 9-9-9-27 kit and 2200 CL7 Pi, and STT Hypers, no Hynix.

I start school tomorrow! 1 class on Mondays/Wednesday/Friday. :)

I can't believe I've called XS home for 4 1/2 years. I got here the year I started high school!

[Don_Dan]

ASRock Z87M OCF and ASUS M6G are available at the same price and might be a good alternative.
PSC are very good, BBSE are clocking well, Hyper are clocking okay, but the performance isn't that good.

Good luck for your first day at school! :up:

[Ace123]

Carrying the Xtremesystems flag further into battle!
http://hwbot.org/league/enthusiast?offset=52
http://hwbot.org/league/enthusiast?offset=-4&countryCode=US

Come on andressergio lets take this!

I have Maximus VI Impact now with 4770K and Trident X 2666. At this point I have no idea what im doing with this setup and could use all the advice I can get!

[Crabby]

Carrying the Xtremesystems flag further into battle!!

You have been busy! Well done.

[l0ud_sil3nc3]

Carrying the Xtremesystems flag further into battle!
http://hwbot.org/league/enthusiast?offset=52
http://hwbot.org/league/enthusiast?offset=-4&countryCode=US

Come on andressergio lets take this!

I have Maximus VI Impact now with 4770K and Trident X 2666. At this point I have no idea what im doing with this setup and could use all the advice I can get!

That sounds like a recipe for validation fun! The Impact is an incredible board for sure you are going to love it:)

[Don_Dan]

I have Maximus VI Impact now with 4770K and Trident X 2666. At this point I have no idea what im doing with this setup and could use all the advice I can get!

Dumo, l0ud_sil3nc3 and andressergio are the experts for Haswell at the moment. Just ask in this thread or send them a PM. :)

_______________________________________

Nice work guys! :up:

http://img826.imageshack.us/img826/6842/adhz.jpg

[BeepBeep2]

ASRock Z87M OCF and ASUS M6G are available at the same price and might be a good alternative.
PSC are very good, BBSE are clocking well, Hyper are clocking okay, but the performance isn't that good.

Good luck for your first day at school! :up:
Hmm, alright. Looks like the M6G might be more attractive to me. I like ASUS boards.

Are PSC and BBSE just not going as high as Hynix for memory clock? All the 1700+ clocks seem to be done on Hynix.

[l0ud_sil3nc3]

Hmm, alright. Looks like the M6G might be more attractive to me. I like ASUS boards.

Are PSC and BBSE just not going as high as Hynix for memory clock? All the 1700+ clocks seem to be done on Hynix.


For competitive 32M benching PSC/BBSE are still what you want, for epeen (valids) single sided MFR are the only way to go:up:

[Don_Dan]

Nice global points in Cinebench 2x (http://hwbot.org/submission/2421697_), Crabby! :up:

[Crabby]

Thanks! I was so happy to get this cpu back that I stopped everything I was doing just to bench it hahaha. Last time I didn't get to do a lot of "testing" before I handed the newly build pc to my friend. :D I want to run Wprime but its not working with my os for some reason, gives an error on start.

[Don_Dan]

Which OS are you running, looks like Win7 64bit? I know WPrime doesn't work on my nlited XP but it should work on all stock OSs... Which error do you get?

[Crabby]

It just says "unexpected error; quitting" but I just ran as admin and it works. Yes it is w7 64bit.

[Don_Dan]

That's a common problem for WPrime and PCMark on Win7, but as you found out running as admin fixes it.


___________________________


For those who haven't seen it yet, elmor is working on an I2C controller called eVc.

elmor's site (http://elmorlabs.com/index.php/evc/)
thread @ HWBot (http://forum.hwbot.org/showthread.php?t=83984)

Video by youngpro:


http://www.youtube.com/watch?feature=player_embedded&v=zbfCWX5ltJs

[BeepBeep2]

For competitive 32M benching PSC/BBSE are still what you want, for epeen (valids) single sided MFR are the only way to go:up:
Okay, thanks loud :)

[Don_Dan]

FUGGER has broken the 6x XTU record (http://hwbot.org/submission/2424393_) during the Intel/Corsair/Asus OC Main Event!
Well done! :up:

Had to take a screenshot of it:

http://imageshack.us/a/img35/3929/9ikp.jpg

I saw l0ud_sil3nc3 and dumo were there as well, tell us more about the event, guys! :)

dumo and Asus' coolice have also set a new IB-E memory clock record (http://valid.canardpc.com/l4ix9m), reaching 1950 MHz 14-31-15-45 with a Core i7 4960X on a ASUS Rampage IV Extreme Black Edition. They used four Corsair Vengeance 3000 sticks based on Hynix MFR ICs.

[Don_Dan]

dumo posted some pics on Facebook:

http://imageshack.us/a/img4/8872/3yc3.jpg

http://imageshack.us/a/img577/2575/m86f.jpg

http://imageshack.us/a/img708/4871/kf5e.jpg

http://imageshack.us/a/img29/8716/ovtm.jpg

:slobber: :slobber: :slobber:

Gunslinger posted another result from the event, scoring 39629 points in 3DMark 11, a new WR (http://hwbot.org/submission/2424543_gunslinger_3dmark11___performance_4x_gefor ce_gtx_titan_39629_marks). He used a 4960X at 5841 MHz, an Asus R4E BE and 4 GTX Titan, modded by Shamino, at 1486 / 1774 MHz.

He included a picture of the R4E BE.... Very sexy:

http://imageshack.us/a/img202/4913/l90s.jpg

[andressergio]

OMG !!! congrats to all !!!

[l0ud_sil3nc3]

The event was a blast, I have some pics I will upload tomorrow, but all I can say was it was a great to actually see everyone in person. The hardware was solid, no deaths of anything on any of the rigs (minus cpu's lol), and we are talking 10+ hour sessions, the board is solid. I think at the end there might have been one 230L left out of the four and I am sure that is gone by today:D

Thanks Asus/Corsair/Intel for hosting such an awesome event in the US, looking forward to many more:)

[BeepBeep2]

Hmm, 4 days left in HWBOT Giga/AMD Pi competition...
Untested FX-8120 sitting,
Giga AM3+ UD5 sitting,
empty dewar sitting...
LN2 pot sitting...
PSC/BBSE/MGH-E DDR3 sitting...
$1500 USD potentially up for grabs...

I know what I'm doing this weekend!

[l0ud_sil3nc3]

Found this one of the group today, what a great time:)

http://i.imgur.com/JJsXtHJ.jpg (http://imgur.com/JJsXtHJ)

[BeepBeep2]

My dewar is full again :D

[Don_Dan]

Epic group of overclockers! :up:

[BeepBeep2]

Got some global / gtp points tonight. Wasn't able to make a submission for the competition. After about 4 hours of ****ing around, stuff started getting a little wet.

Going to bed happy though. :)

Still some LN2 left, maybe 10L. Hope I can set back up in a few days and run Cinebench.

[Don_Dan]

A good day for the team, BeepBeep2 achieves 8 GHz (http://hwbot.org/submission/2426492_beepbeep2_cpu_frequency_fx_8120_8009.9_mhz ) on FX-8120 and l0ud_sil3nc3 achieves DDR3-4000+ (http://hwbot.org/submission/2426519_l0ud_sil3nc3_memory_clock_ddr3_sdram_2029. 5_mhz) on a retail IMC! :)

[Crabby]

Nice! Congrats guys!

[Don_Dan]

http://imageshack.us/a/img854/9207/h9g8.jpg

:up:

[BeepBeep2]

Wooooooooo!

565 BE next, 3 core wPrime, Pifast and Cinebench for global points and team points.

Large backlog of hardware to be benched still, should wait before getting new intel stuff.

[I.nfraR.ed]

Very nice, Beep. Feels great in the 8GHz club :)
You can't imagine how big is my backlog, I can probably get to top10 with some of the great old VGA's I have,
however don't have the time and most important the amount of LN2 I need :(.

[Ace123]

Oooo testin out my sweet new signature banner

[l0ud_sil3nc3]

Oooo testin out my sweet new signature banner


Sig looking great:up:

[Don_Dan]

Large backlog of hardware to be benched still, should wait before getting new intel stuff.

When has a large pile of hardware ever stopped anyone from buying more hardware?! :D


Oooo testin out my sweet new signature banner

:up:

[Ace123]

i delid my 4770, ordered a supremacy with naked ivy kit coming in a few days and picked up some ddr3 2800..... see what happens

[l0ud_sil3nc3]

i delid my 4770, ordered a supremacy with naked ivy kit coming in a few days and picked up some ddr3 2800..... see what happens

Sounds like a recipe for fun. What 2800 kit if you don't mind me asking?

[Don_Dan]

i delid my 4770, ordered a supremacy with naked ivy kit coming in a few days and picked up some ddr3 2800..... see what happens

Sounds great! I'm looking forward to some DDR3-3000+ scores! :up:

[BeepBeep2]

Hmm, continuing to have setbacks...
Few week old Corsair CX600 kicked the bucket, I think it killed more than itself too. Replaced PSU again, no more turning on.
Stock 565 BE and 5770 shouldn't make a 600w PSU upset.

Then lots of personal problems- I'll be back when I get my priorities straight again.

[Crabby]

I hope everything works out and you return soon!

[Don_Dan]

Hmm, continuing to have setbacks...
Few week old Corsair CX600 kicked the bucket, I think it killed more than itself too. Replaced PSU again, no more turning on.
Stock 565 BE and 5770 shouldn't make a 600w PSU upset.

Then lots of personal problems- I'll be back when I get my priorities straight again.

Sorry for being late. All the best, Sam! :up:

[l0ud_sil3nc3]

retail fail, went cold on the ram for something other than pi :p:

http://i.imgur.com/hYNOGVC.png (http://imgur.com/hYNOGVC)

http://i.imgur.com/C1UuGmV.png (http://imgur.com/C1UuGmV)

http://i.imgur.com/7Slp7K7.jpg (http://imgur.com/7Slp7K7)

http://i.imgur.com/yIwIGBR.png (http://imgur.com/yIwIGBR)

[Don_Dan]

Well done, George, also a pretty good XTU score (http://hwbot.org/submission/2435019_l0ud_sil3nc3_xtu_core_i7_4770k_1426_marks) ! :up:

[l0ud_sil3nc3]

Well done, George, also a pretty good XTU score (http://hwbot.org/submission/2435019_l0ud_sil3nc3_xtu_core_i7_4770k_1426_marks) ! :up:


Thanks Dan, still have a few more tweaks to implement, I was just getting an idea of what would pass XTU at what volts/temps. Will give Samsung a spin and see the difference as well, but PSC under cold was pretty smooth for all cpu centric benches.

[Don_Dan]

Send me some of your magic for my setup... :p:

[Don_Dan]

Some info about this year's Country Cup has been posted at HWBot! (http://hwbot.org/news/9988_hwbot_announces_fifth_edition_of_country_cup_ 2013_edition_starts_november_1/)

[Crabby]

Stage 3, Nov 1 ? Dec 23, Vantage Dual GPU (i5+AMD/ATI): for this stage only Core i5 CPUs are allowed. The following video cards families are allowed: Radeon HD 6000, Radeon HD 5000, and Radeon HD 4000. Per country three scores are required, one with each GPU family

I have a pair of hd4850s and an i5 3870k. Funny thing, just last week I was benching these 2 cards but there was a problem. I was getting less points with cfx enabled than with single card! I just gave up.....may have just been a driver issue idk.

edit: Sorry I was thinking this was the team cup hahaha. Carry on.

[l0ud_sil3nc3]

Some info about this year's Country Cup has been posted at HWBot! (http://hwbot.org/news/9988_hwbot_announces_fifth_edition_of_country_cup_ 2013_edition_starts_november_1/)

Stage 8 is all me lol

[Don_Dan]

I have a pair of hd4850s and an i5 3870k. Funny thing, just last week I was benching these 2 cards but there was a problem. I was getting less points with cfx enabled than with single card! I just gave up.....may have just been a driver issue idk.

edit: Sorry I was thinking this was the team cup hahaha. Carry on.

The next Team Cup will be next year. ;)

I'm sure your American colleagues will help you with your CFX problem. :D


Stage 8 is all me lol

I thought so! :rofl:

[BeepBeep2]

I have a pair of hd4850s and an i5 3870k. Funny thing, just last week I was benching these 2 cards but there was a problem. I was getting less points with cfx enabled than with single card! I just gave up.....may have just been a driver issue idk.

edit: Sorry I was thinking this was the team cup hahaha. Carry on.
Which benches?
Try Cat 9.4-9.11 depending on what you're benching.

[Crabby]

Hey, I used cat 9-12, 13-9 and the windows driver. AM3, UNIGINE HEAVEN and 3dMark06. I gave up for a while plus I'm out of town for the next 6 days. I'll try again when I get home with a fresh install.

[Don_Dan]

http://imageshack.us/a/img43/2594/8v8z.jpg

Nice work l0ud_sil3nc3 and andressergio! :up:

[BeepBeep2]

Nice!

[Don_Dan]

The competition page for the HWBot Country Cup 2013 (http://hwbot.org/competition/country_cup_2013/) is online.

Please note that the clock speed for stage 8 of the competition has been reduced to 4 GHz.

[BeepBeep2]

...interesting

Aquamark on AMD FX though...doing everything backwards :D

[Don_Dan]

Congratulations to l0ud_sil3nc3 for winning the Cinebench R15 Launch Challenge (http://hwbot.org/competition/cinebenchr15_launch/)! :clap:

http://imageshack.us/a/img19/891/zth5.jpg

Nice going Ace123, collecting some team power points! :up:

[Don_Dan]

Interest Check for European OC Gathering (http://forum.hwbot.org/showthread.php?t=88962)! :up:

PS: Great 32M run (http://hwbot.org/submission/2446670_), l0ud_sil3nc3!

[Don_Dan]

Congrats to l0ud_sil3nc3 for placing 5th in the HyperX OC Takeover (http://hwbot.org/competition/hyperxhot13/) competition at HWBot! In January he and four others will be flown to Las Vegas to compete in the Finals! :up:

[trans am]

Congrats to l0ud_sil3nc3 for placing 5th in the HyperX OC Takeover (http://hwbot.org/competition/hyperxhot13/) competition at HWBot! In January he and four others will be flown to Las Vegas to compete in the Finals! :up:

All I gotta say to l0ud_sil3nc3 is..."Stand up and be counted, For what you are about to receive
We are the xs team
We'll give you everything you need
Hail hail to the good times
'cause the overclock has got the right of way
We ain't no legend, ain't no cause
We're just overclocking' for today

For those about to overclock, we salute you
For those about to overclock, we salute you


http://www.youtube.com/watch?v=fKhTk0IynHM

[Don_Dan]

Haha, Alvin! :D

George, where are you? Massman wrote an article about your victory (http://hwbot.org/newsflash/2281_l0ud_sil3nc3_%28usa%29_wins_cinebench_r15_lau nch_challenge_flashg_%28au%29_second_true_monkey_% 28de%29_third_)! :up:

[l0ud_sil3nc3]

Haha, Alvin! :D

George, where are you? Massman wrote an article about your victory (http://hwbot.org/newsflash/2281_l0ud_sil3nc3_%28usa%29_wins_cinebench_r15_lau nch_challenge_flashg_%28au%29_second_true_monkey_% 28de%29_third_)! :up:

Thanks guys I have been busy trying to get the dead cpu to back to life, but no such luck on both the special bios's from Peter or Nick, chip is crocodile dundee lol

TA that is killer dude!

[Don_Dan]

You're truly the master of competitions! :D
Too bad the CPU died, but it did a good job during its life.

For everyone who's running Haswell on Asus Maximus VI boards: Xtreme Addict's tips to keep CPUs alive at HWBot forum (http://forum.hwbot.org/showthread.php?t=89181).

[trans am]

Thanks guys I have been busy trying to get the dead cpu to back to life, but no such luck on both the special bios's from Peter or Nick, chip is crocodile dundee lol

TA that is killer dude!


dude you have no idea. I'm going to work up a parody of ac/dc "for those about to rock" (for those about to overclock)
this is going to be the official xs team anthem. its gonna be a smash hit. this is going to be the song you guys play in the background when you are benching. think of the AU team. Perfect my fav oc team. the fly out and bench together and party all night and listen to ac/dc. I made a USA map of the xs members. please copy and add onto it.
we need to get together and have a oc party.


Here is what I came up with for the official xs team anthem. the best line is "We ain't no overclock legends
cause We're just benching for today"





"For Those About To Overclock (We Salute You)"

We insulate tonight for tomorrows overclock fight

Stand up and be counted for what you are about to receive
We are the benchers
We'll give you all the hardware you need
Hail hail to the good times
the overclock has got the right of way
We ain't no overclock legends
cause We're just benching for today

For those about to overclock, we salute you
For those about to overclock, we salute you

We bench at dawn on the front line
LN2 right outta the blue
The mem timings are tight with a waza bite
the tweakers will roll and rock tonight

For those about to overclock, we salute you
For those about to overclock, we salute you
For those about to overclock, we salute you, yes we do
For those about to overclock, we salute you

Salute

massman's for hire checking for the liar's
Ready and aimed at you
Pick up your thermos and load your containers
For a goddamn 32 million run salute
For those about to overclock, we salute you
XS.. no means yes

We salute you

For those about to overclock
We salute you
For those about to overclock
take a screen shot
for the H... dubaya bot
I got my f1 from kingpin and I'm ready to win

We salute you

We salute you, c'mon

For those with the crazy Vcore, we salute you
For those uploading their score, we salute you
For those about to pour, we salute you
For those disabling cores, we salute you

bench, bench
pour, more

For those who clock
For those who rock
Those who bench high
And those who bench baked

We salute you
We salute you
We salute you

Fire

[BeepBeep2]

Did I mention I can sing much like Brian Johnson?

Here's what I would tweak the song with some alternate lyrics :p:


"For Those About To (Over)'clock (We Salute You)"

We insulate tonight for the overclock fight

Stand up and be counted for what you are about to achieve
We are the benchers
Gonna give you all the tweaks that you need
Hail hail to the good times
XS has got the right of way
We ain't no legends
On the HardwareBot
We're just benching for today

For those about to 'clock, we salute you
For those about to 'clock, we salute you

We bench at dawn on the front line
LN2 right outta the blue
Our timings are tight with the waza bite
The forums will roll and rock tonight

For those about to 'clock, we salute you
For those about to 'clock, we salute you
For those about to 'clock, we salute you, yes we do
For those about to 'clock, we salute you

Salute

Now massman's for hire looking for all of the liars
Ready and aimed at you
Now pick up your slack don't cheat those screenshot facts
For a 20 litre Pi salute
For those about to 'clock, we salute you
For those about to 'clock, we salute you
For those about to 'clock, we salute you

We salute you

Yeah, yeah, c'mon!
For those back from the store, we salute you
For those about to pour, we salute you
For those uploading scores, we salute you
For those with crazy cores, we salute you

Pour! Pour!
Clock! Clock!

For those who lead
For those who bleed
Those benching high
Those benching low
We salute you
We salute you
We salute you

Fire

[Don_Dan]

^ You guys crack me up! :D

http://imageshack.us/a/img197/1885/pshz.jpg

l0ud_sil3nc3 clocking his FX-8350 and I'm just collecting some team points. :)

[BeepBeep2]

Mass domination, crazy CPU l0ud_sil3nc3!

[l0ud_sil3nc3]

If I knew how to use PScheck I would post a proper sub, for validation but have a few other things to finish up first;)

Still have to get a few screens off of the ssd to post before I run some Aquamark for the Country Cup.

[Don_Dan]

Did you read these threads? 1 (http://www.xtremesystems.org/forums/showthread.php?276190-AMD-PSCHECK-for-Bulldozer-UPDATE-NEWER-VERSION-amp-INSTRUCTION-HOW-TO-USE-IT) and 2 (http://www.overclockers.com/forums/showthread.php?t=691683)

Looks like the USA are going for the win in this year's Country Cup! :D

[BeepBeep2]

I might have a couple things up my sleeves in December :D
@Don_Dan - some points play in US favor right now for having more submissions in a certain stage, points would be much different if calculated solely on the averaging...

Vantage Dual GPU, Aquamark, 32M...hmm

[Don_Dan]

I know, but George is planning to bench for CC and all of us know that he wins every competition he enters... :D

[BeepBeep2]

Unless he can put in submissions for everything!
I've got two HD 6970 with waterblocks sitting ready for Vantage, not sure if I'll have quite a CPU, could pick up a 2500K.

These stages require several submissions, can one person submit multiple for each stage?
I think I can have a worthwhile contribution though I'm a bit down on time/power/shtuff

[Splave]

^no 1 sub per stage, but we need all your guys help! even if its just a stock sub for an obscure category it helps us so much :D

[ZenEffect]

i considered benching again for cc... then decided i cant. have to worry about too many other things at the moment. life has been flipped upside down for a little while now, but finally seeing the light at the end of the tunnel. taking a break now to bench would cause me to lose focus, and there is too much on the line right now for that.

[l0ud_sil3nc3]

Unless he can put in submissions for everything!
I've got two HD 6970 with waterblocks sitting ready for Vantage, not sure if I'll have quite a CPU, could pick up a 2500K.

These stages require several submissions, can one person submit multiple for each stage?
I think I can have a worthwhile contribution though I'm a bit down on time/power/shtuff

I have a wounded 3570k or a 4670k if you do both cards for the Vantage stage.

[BeepBeep2]

I would take the the 3570K but school is priority right now, not a good idea to have you ship something just for it to sit around because I have to take care of more important things first.
I still have that MIVE but I either need a sandy bridge CPU to reflash IME/bios or buy new bios chips. I can't even remember if it has Ivy compatible bioses. If it does it would work as/is but with locked BCLK :(

Just don't have cash for more/new hardware, education is so expensive ffs.

[Don_Dan]

^no 1 sub per stage, but we need all your guys help! even if its just a stock sub for an obscure category it helps us so much :D

I've already submitted a stock run... For Germany. :hrhr: :D


i considered benching again for cc... then decided i cant. have to worry about too many other things at the moment. life has been flipped upside down for a little while now, but finally seeing the light at the end of the tunnel. taking a break now to bench would cause me to lose focus, and there is too much on the line right now for that.

Looking forward to seeing you again when everything is back to normal. :up:

[ZenEffect]

Seems some highly binned gtx2 would be useful for country cup...

[Don_Dan]

Noooooo, not at all... :)

[ZenEffect]

Noooooo, not at all... :)

hmmm too bad I don't have any time to bench them :rofl:

[Don_Dan]

Phew (http://www.youtube.com/watch?v=z5rRZdiu1UE)! :hehe: :rofl:

[BeepBeep2]

Hey Zen here take my address XD

[Don_Dan]

http://imageshack.us/a/img443/6987/1myk.jpg

http://imageshack.us/a/img513/550/vrsw.jpg

Congrats to l0ud_sil3nc3 for taking #1 on the team and #3 in the United States! :up: :up:

How did you make the chip come back to life?

PS: Also good to see SteveRo submitting some PCMark scores again! :)

[l0ud_sil3nc3]

uh oh

http://i.imgur.com/YlMDPwK.png (http://imgur.com/YlMDPwK)

[Don_Dan]

Whaaaaaaaaaaaaaaaaaaaaaaaaaat?! :shocked: :up:

[ZenEffect]

george, your phone isnt working. hmu, i have some "parts" that need benching for country cup...

nice cpu

[l0ud_sil3nc3]

^ygpm

[Don_Dan]

Your latest submission also pushed us over 27k team points - 27012.93 right now! :)

[trans am]

uh oh

http://i.imgur.com/ylmdpwk.png (http://imgur.com/ylmdpwk)

holy f!!k!!

has anyone on the team messed with ln2 on the R9 amd cards? They get hot so what happens when you pour a little ln2 on them?

beep , thanks for the new lyrics. mark and I will work them up next time we practice. I have a 3770k if anyone needs it. I need to relearn how to oc. I really miss the excitement.
msi max or roy boy. we need to get together soon and get refresh my memory. zeneffect spent countless hours on skype with me and I forgot everything he taught me.
I love that guy. zeneffect any new guitars? that dude is a sick guitar player too. ask fugger to get a new column called xs band where we all collaborate on songs about overclocking.

[Ace123]

Lol you are making it very hard to catch you!

[BeepBeep2]

"How to dominate"
Step 1- Become l0ud_sil3nc3

[ZenEffect]

"How to dominate"
Step 1- Join XtremeSystems

fixed

[BeepBeep2]

fixed
Intel all dey erry dey
AMD all nite erry nite party party party

[Crabby]

Hey XS team, we moved up in rank to 14th!!! Well done! :up:

[Don_Dan]

We moved up only because Freakezoit left OC Team Europe, but still... we moved up a rank. :D :up:

[Ace123]

Why did he go solo?

[Don_Dan]

http://imageshack.com/a/img849/6884/44gd.jpg

:nono:

http://imageshack.com/a/img132/7056/hzsl.jpg

:)


Why did he go solo?

No idea! :shrug:

[BeepBeep2]

Will fix that soon Dan ;)

[l0ud_sil3nc3]

Will fix that soon Dan ;)

He has no idea:D

Shi(f)t is about to get soooo real, it is going to get weird;)

[Don_Dan]

Will fix that soon Dan ;)


He has no idea:D

Shi(f)t is about to get soooo real, it is going to get weird;)

http://imageshack.com/a/img823/1144/7cfe.jpg

:D

http://imageshack.com/a/img812/9614/sqro.jpg

Waiting for UCBench and Cinebench on the G470! :p:

PS: Why did ImageShack have to swith to an entirely new design... :( :mad:

[l0ud_sil3nc3]

moar!

http://i.imgur.com/qZknKku.png (http://imgur.com/qZknKku)

Tired of silverware;)

[Don_Dan]

Please run UCBench on the G470 for some more silverware! :p:

Good work on your latest XTU submissions! :up:

By the way: Team USA, I'm very impressed, you even managed to make Charles (http://hwbot.org/submission/2454943_) submit a score for the Country Cup! :D

[ZenEffect]

oh its going to get rockin' real soon.

http://i48.photobucket.com/albums/f210/icon22976/IMG_0297_zps5b13f19e.jpg (http://s48.photobucket.com/user/icon22976/media/IMG_0297_zps5b13f19e.jpg.html)

all chew* binned hypers. every one of these are crazy good esp the gtx2

[BeepBeep2]

2000 CL6 on some of those sticks...

[Crabby]

Oh so nice!

[Movieman]

oh its going to get rockin' real soon.

http://i48.photobucket.com/albums/f210/icon22976/IMG_0297_zps5b13f19e.jpg (http://s48.photobucket.com/user/icon22976/media/IMG_0297_zps5b13f19e.jpg.html)

all chew* binned hypers. every one of these are crazy good esp the gtx2
I have 9-GTX1's..and a while back they made a trip to Taiwan from NH and had this guy named Vince bin them all.. :D

[mikecdm]

Look at the glorious hypers

[ZenEffect]

I have 9-GTX1's..and a while back they made a trip to Taiwan from NH and had this guy named Vince bin them all.. :D

what are they doing now? I know quite a few people who would do magic with those

[Don_Dan]

I don't like where this is going... :rofl:

[ZenEffect]

feelin' the itch, and i have Friday off...

[Ace123]

Its going to be 16F at my house wednesday and thursday next week... I need more graphics cards!

[Don_Dan]

Its going to be 16F at my house wednesday and thursday next week... I need more graphics cards!

Have you looked at some older VGAs?
Air or water cooling? Can you do hard mods or only software?

[Splave]

http://i.imgur.com/kr3ersL.png


http://subversify.com/wp-content/uploads/2013/09/49157-george-takei-oh-my-gif-e64l.gif


Going to be a fun holiday here :)


670 DCUII just getting started on water
http://i.imgur.com/z5aGf7M.jpg

[ZenEffect]

4850s (yes 2, fully modded) here waiting for Friday fun times.

[Ace123]

We should all meet in Vegas some time

[Crabby]

4850s (yes 2, fully modded) here waiting for Friday fun times.

I was going to bench my 4850s but I could never hope to beat Micecdm's 4890s score.

[ZenEffect]

I was going to bench my 4850s but I could never hope to beat Micecdm's 4890s score.

ive got a 4870s and 4890s as well hanging out, the 4890s are modded up and were benched previously. artifacts like a mofo, but still good enough to bench. scores are correct etc.

I think there may be a cherry 5990 somewhere around also... have to check the pile. will see what is what when the time comes.

[l0ud_sil3nc3]

Just realized that I need to refill as my local Airgas will be closed from tomorrow to next Monday.

[ZenEffect]

Just realized that I need to refill as my local Airgas will be closed from tomorrow to next Monday.

do you know if that is just your local airgas or all of them? I was planning to go Friday morning, but didn't check to see if they would be open. :(