XS HWBot Team

[l0ud_sil3nc3]

anybody with a spare lightning 1.5gb? :)


I have a DirectCUII GTX 580 that is a horrible clocker on air, I can only imagine how crappy it would be under cold:p:

[Hondacity]

i have 3 lightnings(1 from bad@games) I'm not sure if mixing gpus will be fun lol.

[l0ud_sil3nc3]

i have 3 lightnings(1 from bad@games) I'm not sure if mixing gpus will be fun lol.

ya prolly not the greatest of ideas, but thought I'd throw it out there

[ZenEffect]

mixing gpu = lower score. ive tested ref + dcuII vs 2x dcuII (clocked all the same)

matched cards is faster.

[l0ud_sil3nc3]

mixing gpu = lower score. ive tested ref + dcuII vs 2x dcuII (clocked all the same)

matched cards is faster.

good to know Zen, I always wondered if there was a performance hit mixing and matching gpus.

[ZenEffect]

its a yes and no actually. if they are all reference cards, you can flash all the same bios to ensure you are getting same timings etc across different brands.

it its non-ref, dont mix them try to match.

i think im done with 1156 for now. i will chase 3k another day (or if it becomes necessary for country cup)

i didnt even freeze the ram, and it was the imc giving out because coldest i could get was -73c. i couldnt even apply more than 1.52v imc, the board would shut off :shrug:

[l0ud_sil3nc3]

tied with Poland:D

[Hondacity]

that is so awesome! I'm proud of you man! awesome benching!

[l0ud_sil3nc3]

that is so awesome! I'm proud of you man! awesome benching!

thanks bud it means alot, however I am still going to take it under cold now that I have w8 somewhat dialed.

also going to do some testing with 3dmark11 and w8.

what sucks is that I have a decent wprime score that I should have submitted for the cup but could not due to ISP issues, but it looks like we have 2nd place for sure if we can hold on to the 3DMark11 stage as it worth the most.

regardless this has been an awesome comp especially the last few stages.

[Hondacity]

yeah i'll do my best with 3x sli, thats the most i can do. i have messaged one dude. hopefully he still has possession of what i need. its gonna be an uphill battle though. i'm sure some guys will put their systems on ln2. its gonna be tough. almost impossible. but hey we do this for fun :D

i was thinking crossfire too but that was not even available. so best case scenario/hw ...

i'll sure have fun.

[l0ud_sil3nc3]

yeah i'll do my best with 3x sli, thats the most i can do. i have messaged one dude. hopefully he still has possession of what i need. its gonna be an uphill battle though. i'm sure some guys will put their systems on ln2. its gonna be tough. almost impossible. but hey we do this for fun :D

i was thinking crossfire too but that was not even available. so best case scenario/hw ...

i'll sure have fun.

cpu on LN2 and cards on air?

if so that will net some killer results, but cards on cold would just be icing on the cake:D

[Hondacity]

i don't have slim pots lol

yes i'll try pushing the cpu. but 3dm11 isn't very cpu centric. so even if i clock the cpu to over 6ghz. it won't beat a cpu on air with gpus on ln2.

[l0ud_sil3nc3]

i don't have slim pots lol

yes i'll try pushing the cpu. but 3dm11 isn't very cpu centric. so even if i clock the cpu to over 6ghz. it won't beat a cpu on air with gpus on ln2.

oh well gotta work with what you have, and tri sli gtx 580 sounds good to me.

[trans am]

i don't have slim pots lol

yes i'll try pushing the cpu. but 3dm11 isn't very cpu centric. so even if i clock the cpu to over 6ghz. it won't beat a cpu on air with gpus on ln2.

you wanna borrow mine? i only have 1 though. lemme know.

[Hondacity]

thanks for the offer bud, however i won't do ln2 on them. i promised i won't kill any gpus hahhaha

[Movieman]

thanks for the offer bud, however i won't do ln2 on them. i promised i won't kill any gpus hahhaha
This is an automaticly announcement from the staff at XtremeSystems
"Promising not to kill hardware" goes against the principles of XS doctrine.
A second offense brings the penalty of automatic banishment to a parrallel universe.
This is a recording

:p:

[Hondacity]

hahahahha good motivation lol

[l0ud_sil3nc3]

http://hwbot.org/submission/2234760_l0ud_sil3nc3_pcmark7_core_i7_3960x_7576_ma rks

here is some motivation for ya

[SteveRo]

http://hwbot.org/submission/2234760_l0ud_sil3nc3_pcmark7_core_i7_3960x_7576_ma rks

here is some motivation for ya

Well done!! :)

[l0ud_sil3nc3]

for some reason Poland lost two points, so. . .

we are in 1st place for the time being:cool:

[Don_Dan]

Poland was pushed down a rank in Stage 7, but I'm afraid the current submission is not their final one. :D

Go USA! Go Poland! :cheer:

[SteveRo]

^^ I think Poland is sandbagging!

[Don_Dan]

There was a rule change for Aquamark 3 submissions, you can get the HWBot Edition here (http://hwbot.org/newsflash/1574_aquamark3_hwbot_edition_wrapper_available_for _download).

[G.Foyle]

^^ I think Poland is sandbagging!
We ain't, really :)
I don't know about my colleagues but I'm done benching for now, because of the holidays and because I spent all my spare money :P

[ZenEffect]

seems Hungary is doing the work for Poland.... US needs a new 3d11 score pronto!

[l0ud_sil3nc3]

seems Hungary is doing the work for Poland.... US needs a new 3d11 score pronto!

Hondacity is on it I believe, BD w/ tri sli GTX 580's should be awesome:up:

[ZenEffect]

honda has pcie extenders i think/hope he can manage tri sli w/ fat pots and some creativity

[l0ud_sil3nc3]

I am pcmark7ed to death:(

http://i.imgur.com/16aT5.jpg (http://imgur.com/16aT5)

[mikecdm]

I am pcmark7ed to death:(


Good work, I've been having nothing but trouble with it. I had it working somewhat decent one day. The following day it did this all day.

http://i75.photobucket.com/albums/i296/mikecdm/th_pcmark7errormsg-1.jpg (http://s75.photobucket.com/albums/i296/mikecdm/?action=view&current=pcmark7errormsg-1.jpg)

[SteveRo]

http://hwbot.org/search/submissions/permalink?ids=2232207,2235404,2235334

tomorrow - zambezi under cascade for maxmem - go USA! :)

[SteveRo]

Good work, I've been having nothing but trouble with it. I had it working somewhat decent one day. The following day it did this all day.

http://i75.photobucket.com/albums/i296/mikecdm/th_pcmark7errormsg-1.jpg (http://s75.photobucket.com/albums/i296/mikecdm/?action=view¤t=pcmark7errormsg-1.jpg)

acronis true image - i need to use it all the time :)

[l0ud_sil3nc3]

Good work, I've been having nothing but trouble with it. I had it working somewhat decent one day. The following day it did this all day.

http://i75.photobucket.com/albums/i296/mikecdm/th_pcmark7errormsg-1.jpg (http://s75.photobucket.com/albums/i296/mikecdm/?action=view&current=pcmark7errormsg-1.jpg)



is that happening when you try to run the bench?

[l0ud_sil3nc3]

http://hwbot.org/search/submissions/permalink?ids=2232207,2235404,2235334

tomorrow - zambezi under cascade for maxmem - go USA! :)

very efficient score, we are looking good for the pcmark7 stage guys

I have one more backup, and I am going to try to break 8k today, don't hold your breath though:p:

[Hondacity]

i hate this faildozer

http://i24.photobucket.com/albums/c5/hondacity25/f859e085.jpg

[l0ud_sil3nc3]

@ honda

going all out on the cpu and mems, thats what I liketo see:up:

[ZenEffect]

keep pushing it Rob! we NEED that score.

[Hondacity]

still collecting info of "how to dozer" hahahhaha, the coldbug and the coldbootbug is just stressin me out.

coldbugging just after -180 (my pot loves -191c) colder than -180c = frozen wonderland, and it will have a coldbootbug @ -60c. how fun is that? hahahah

bbse was not the right choice. i'll have to redo the rams tomorrow. but for now its just chillin. i love my rampot as it holds ram temps better than the "other rampot"

max ram speed for submission is 1408.7 i know its not hynix hahahah

[ZenEffect]

try some psc ;)

*edit*

and get on skype!

[Hondacity]

ohhhh i'll give you a skype buzz when i got the os runnin...i just need a quick lunch.

[ZenEffect]

its 5:00PM, lunch was a long time ago buddy.

[Hondacity]

this is lunch slash dinner lol

skype is up...

[mikecdm]

http://hwbot.org/search/submissions/permalink?ids=2232207,2235404,2235334

tomorrow - zambezi under cascade for maxmem - go USA! :)
Looking good, I need to step it up now


is that happening when you try to run the bench?

yea, thats what it does when i click to open the bench. I tested it the first day and it hung on the collecting system info a few times, but still opened up. The following day it gave me that. I reinstalled windows three times already and always does the same thing.

[Hondacity]

AMD GrandMaster I.M.O.G. is helping me out :D go go Team.USA and Team.Overclockers

here's his article doing 8gigahurtZ!

http://www.overclockers.com/howto-8-ghz-bulldozer/

shoutouts to Team.Pure and Team.NinjaLane :D

[l0ud_sil3nc3]

Looking good, I need to step it up now



yea, thats what it does when i click to open the bench. I tested it the first day and it hung on the collecting system info a few times, but still opened up. The following day it gave me that. I reinstalled windows three times already and always does the same thing.

install sysinfo 4.6, and if that doesn't work disable it as this is allowed.

[SteveRo]

I must be doing somthing wrong - under the cascade I can't even get maxmem over 1177 when last week on air I was getting 1231.

http://hwbot.org/submission/2233521_stevero_memory_clock_ddr3_sdram_1231.4_mhz

Tried both Dominator GT 2kc7 and GSkill 2.2kc7-10-10 both reboot at the same point (just over 1177), makes me think I have something wrong in my set up?

I have run cpu/nb up to 1.4v, nb @ 1.3 and dramv up to 1.89.

Anyone have any ideas? :(

[ZenEffect]

wow way too much dram for that freq.

get in touch with honda, he is pushing the same stuff :up:

[Don_Dan]

Steve, Hypers are not the best choice for max MHz on BD, try working with your Ripjaws X and at lower Volts. Hypers were causing problems on Thuban @ LN2 as well if I recall correctly.

I just snagged a 2GB Hynix value stick at ebay for 4€ shipped, should be Hynix BFR chips. :)

[ZenEffect]

psc/bdbg should work well also.

[Hondacity]

I didn't get 1500+

but I did improve against the bbse kits. psc fared better for high frequency. no coldbug on the psc kits :D -191c for 5hours. but bullfaildozer was bad. I used the farthest slot which might have caused my awful result.

I used 9920 bios, 2v on memory. nothing special on the cpu voltages I tried keeping the bd alive for the sli tonight.

Refilling my empty 25L, tonight I'll have 45L

[l0ud_sil3nc3]

for the memory clock stage what do you guys think would be better, psc or hynix bfr?

[Hondacity]

hynix bfr with xmp 1.3 for 2011socket

[l0ud_sil3nc3]

hynix bfr with xmp 1.3 for 2011socket

even if they are low bin (2133 9-11-10)?

[Hondacity]

yep thats what sf3d used... he didn't use the 2400mhz kit.

[Don_Dan]

I think so too, Hynix BFR is the way to go for max memory MHz on X79 and BD.

I'm trying to motivate some German guys for stage 4, I played a bit with X48 tonight... Click. (http://valid.canardpc.com/show_oc.php?id=2171798) Steve, you have to beat this with BD! :p:
Germany is still lacking decent X79, X58 and P55 scores though.

[l0ud_sil3nc3]

well time to redo the memory clock then, Canada just took first place

[G.Foyle]

I played a bit with X48 tonight... Click. (http://valid.canardpc.com/show_oc.php?id=2171798)
Whoa, amazing clock for LGA775 ! Congrats :)

[l0ud_sil3nc3]

I think so too, Hynix BFR is the way to go for max memory MHz on X79 and BD.

I'm trying to motivate some German guys for stage 4, I played a bit with X48 tonight... Click. (http://valid.canardpc.com/show_oc.php?id=2171798) Steve, you have to beat this with BD! :p:
Germany is still lacking decent X79, X58 and P55 scores though.
I didn't even see that sick score on X48 don

[Hondacity]

sick score capt D!

why are you in germany? lol :P

[l0ud_sil3nc3]

sick score capt D!

why are you in germany? lol :P

agreed we need the points:P

Greece just laid down a 1485 memclock avg:shocked:

[SteveRo]

I think so too, Hynix BFR is the way to go for max memory MHz on X79 and BD.

I'm trying to motivate some German guys for stage 4, I played a bit with X48 tonight... Click. (http://valid.canardpc.com/show_oc.php?id=2171798) Steve, you have to beat this with BD! :p:
Germany is still lacking decent X79, X58 and P55 scores though.

I have a 1301 I just need to rerun :( as I lost my background for some reason! http://valid.canardpc.com/show_oc.php?id=2172710

http://img254.imageshack.us/img254/7634/13011.jpg (http://img254.imageshack.us/i/13011.jpg/)

[Hondacity]

1. cpu won't overclock with rog xpander lol
2. 1 gpu might be shtty
3. haven't maxed cpu yet.
4. tired as hell.
5. 5hours to go

[SteveRo]

^^ Go Honda! Go USA!

[l0ud_sil3nc3]

1. cpu won't overclock with rog xpander lol
2. 1 gpu might be shtty
3. haven't maxed cpu yet.
4. tired as hell.
5. 5hours to go


you got it man, just a few more hours:)

[Don_Dan]

Whoa, amazing clock for LGA775 ! Congrats :)


I didn't even see that sick score on X48 don


sick score capt D!

Thanks guys, I'm FSB-challenged at those clocks, to achieve better results I'd have to use the E8600 or put the system under LN2.
Booting at 600MHz 1:2 is pretty crazy, I was amazed when it actually worked. :D



why are you in germany? lol :P


agreed we need the points:P

You can adopt me of course! :rofl:

I've motivated two more guys for the competition and Germany's average is now at 1125MHz, but it seems like no one in Germany owns a working P55, X58 or Llano setup anymore.

I'll keep my fingers crossed for the US, go Hondacity! :up:

[Hondacity]

totally succumbed to tiredness, I was ready for my last run(40minutes before deadline), 6.6ghz 8 threads keeping it away from cb(-185c) , temperature swing was bad as I had so much ice inside the pot. Then bam. coldbug. fuuuuu

had fun with the sli'ing, took hours to figure out i was at the 4x slot..wtf?

no fun with bd hahahah, new platform was challenging, certainly worth studying abit more. watching sf3d do it in 8minutes was a good motivation but i'm no amd pro lol

thanks to ZenEffect, Redmax, Chew* and I.OMG :D

Happy Last days of 2011 Team.XS

here's my setups

http://i24.photobucket.com/albums/c5/hondacity25/22ed7cdb.jpg

http://i24.photobucket.com/albums/c5/hondacity25/f859e085.jpg

[l0ud_sil3nc3]

great job guys

[Don_Dan]

It's great to see so much activity at the end of the year:

http://img141.imageshack.us/img141/6748/topscoresdecember31st20.jpg

Congrats to Team Poland, and well done Team USA! :up:

The Greeks are my memory overclocking heroes! Averaging 1584MHz... :shocked:

[Hondacity]

yeah Team.PL beat the Greeks :D

I miss that hyperx rams...those were super good

fresh 45L for the long weekend :D

[G.Foyle]

Happy New Year guys!

About the Country Cup - I went to sleep at 23:30, I couldn't bear the suspense. I was sure we'd end 3rd, 2nd AT BEST.
Also, I wish to never see that triple accursed pcmark ever again.

[l0ud_sil3nc3]

Happy New Year guys!

About the Country Cup - I went to sleep at 23:30, I couldn't bear the suspense. I was sure we'd end 3rd, 2nd AT BEST.
Also, I wish to never see that triple accursed pcmark ever again.

you guys did phenomenal and much respect for all the hard work, and f*** pcmark 7:p:

after seeing all the software tweaks that are needed I am done.

raw mhz and storage don't scale well at all.

[SteveRo]

Messrs Honda, Loud and all of Team USA - much thanks for the hard work and the very best to all of Teams XS and USA for the new year! :up::up::up:

Also, much thanks to Mr. Don_Dan for all he does for us as our XS Team Captain! :up::up::up:

[l0ud_sil3nc3]

Messrs Honda, Loud and all of Team USA - much thanks for the hard work and the very best to all of Teams XS and USA for the new year! :up::up::up:

Also, much thanks to Mr. Don_Dan for all he does for us as our XS Team Captain! :up::up::up:

why thank you sir, it is all ready a good year:)

http://hwbot.org/submission/2236457_

[ZenEffect]

Good work, I've been having nothing but trouble with it. I had it working somewhat decent one day. The following day it did this all day.

http://i75.photobucket.com/albums/i296/mikecdm/th_pcmark7errormsg-1.jpg (http://s75.photobucket.com/albums/i296/mikecdm/?action=view¤t=pcmark7errormsg-1.jpg)

go to C:\Users\*USER NAME*\AppData\Local\

delete the futuremark corporation folder. the xml inside is blank, just got this error too and resolved it.

[Hondacity]

Competition Points - these are permanent, am I right?

Team.XS 94pts
G.Foyle 30pts!
SteveRo 14pts
Yotomeczek 9pts
MTP04 9pts
Loud_Silencr 6pts
Sparkie_Stevens 6pts
ZenEffect 4pts
Marcolecorse 4pts
Don_Dan 3pts
Bad@games 1pts


http://i24.photobucket.com/albums/c5/hondacity25/2094d109.png

[mikecdm]

go to C:\Users\*USER NAME*\AppData\Local\

delete the futuremark corporation folder. the xml inside is blank, just got this error too and resolved it.

I did that and got it to run again, but it still kept hanging on the collecting systeminfo. I finally gave up on it and thats why i never got an updated score. I spent 3 days trying to get a score and couldn't. Well good job guys. I wish I would have participated in some of the earlier stages, but didn't try until later.

[SteveRo]

Competition Points - these are permanent, am I right?

Team.XS 94pts
G.Foyle 30pts!
SteveRo 14pts
Yotomeczek 9pts
MTP04 9pts
Loud_Silencr 6pts
Sparkie_Stevens 6pts
ZenEffect 4pts
Marcolecorse 4pts
Don_Dan 3pts
Bad@games 1pts


http://i24.photobucket.com/albums/c5/hondacity25/2094d109.png

Yes, competition points are permanent as far as i know.

[Don_Dan]

Happy New Year! :toast:

Thanks to all of you guys for a great year 2011, and all the best for the new year! :up:

[MTP04]

Happy New Year and all the best for 2012 to Team XS!

[l0ud_sil3nc3]

happy new year team XS!

[Hondacity]

Deachus wooooo

http://hwbot.org/user/deachus/#Points

strong 3 team rank jump cause of these xtreme dude :D

[l0ud_sil3nc3]

nice job deachus and stevero, just hopped over Madshrimps:up:

[Don_Dan]

Right now we're ranked 9th in the team league, but ranks 9 to 12 are within 30 ( yes, thirty ) points! :shocked:

I forgot if I wrote a small notification in this thread already, but please run UCBench as well when you bench a new CPU, Hardware and Hardware Team Power Points have been enabled for this benchmark. :up:

[Mafio]

hey guys, can i join the team?

[l0ud_sil3nc3]

hey guys, can i join the team?

hells ya bud:up:

[Hondacity]

mafio??????

the worlds best memory tweaker :D

yeheyyyy :D

[MTP04]

hey guys, can i join the team?

I don't see why not.:)

[Mafio]

ok, i'm in :)

[l0ud_sil3nc3]

ok, i'm in :)

:welcome:

just took a look at some of your submission's and . . .

http://i.imgur.com/jhhBs.png (http://imgur.com/jhhBs)

glad to have you onboard:up:

[Don_Dan]

No objections here either, welcome to the team Mafio! :welcome:

[SteveRo]

Welcome Mafio! :)

[Hondacity]

hey look at our ranking solid #9 :D

its gonna be a fun year.. with keplers and 7xxx series gpus and surprise(super binned) cpus from intel..(5.8 Mhz - 7 Thz extreme procs)

new series will prolly drop old gpu prices further. benching old tech would be good.

maybe new ram kits too.. geil is looking like gskill'ish lol. hyperx where are you?

funnnnn :)

[Don_Dan]

Yesterday I tested one of my Christmas presents, a GEIL EVO TWO kit, rated DDR3-2000 CL6-9-6 @ 1.65V. It looks like a very nice kit, decent quality for the price. The heatspreader is very heavy, you can feel that some real copper was used. I can definitely recommend this kit.

http://img689.imageshack.us/img689/7581/ddr31600686201tgeilevot.jpg

I've also received a second 2000C9D kit, but these HCF0 are not half as much fun in dual-channel as they are in single channel. No high clocks were possible for me, my D9JNL were much better. :(

http://img17.imageshack.us/img17/5019/ddr32000999272tcorsair2.jpg

@Hondacity: I'm hoping for old tech's prices to drop as well, although I still want to bench my LGA775 chips I want something new to play with. And I need a new platform to max out my Hyper and PSC kits anyway. :D

[l0ud_sil3nc3]

@ Don

looks like you got some nice memory to keep you occupied on a plethora of platforms:up:

[Don_Dan]

I hope so, I had to update my memory arsenal for whatever comes after LGA775. Got a good deal on the kit and just couldn't resist. :D

[Don_Dan]

Massman and his mad shrimps overtook us and are now on the 9th rank again, we're down to 10th. :(


Great work SteveRo, pushing that Q9550 to the limit and beyond! :up: :up: :up:
Also nice lazy benching Mafio! :D

[Hondacity]

I wish HWbot would update faster like every 1hr lol

[SteveRo]

^^ looks like we are back at 9th but Massman and Gamer are benching 7970s :rolleyes:

[Mafio]

don't worry, 1 month and also XS guys will have 7970 ;)

[Don_Dan]

Steve, the team ranking is only updated once a day, currently Madshrimps has a nice 500 pts lead on us.

[Hondacity]

@Capt_D

I know hw points

but how much team points did i contribute with the 5(last) submissions?

[SteveRo]

Great work SteveRo, pushing that Q9550 to the limit and beyond! :up: :up: :up:
:D

Much thanks to all my XS Teammates that helped me with the Q95 - especially Dr. Linuxfan! :up::up::up:

http://img225.imageshack.us/img225/113/q9550results.jpg (http://img225.imageshack.us/i/q9550results.jpg/)

[Hondacity]

wooowww thats an awesome screenshot :D

[Don_Dan]

Damn, Steve, I wanted to post that screenshot, but yesterday that page wasn't updated yet. :p: :rofl:

A clean sweep! :clap:



@Capt_D

I know hw points

but how much team points did i contribute with the 5(last) submissions?

That's not easy to say, for example your 05 score is worth 28.8 global team power points, but because you posted your score chew*'s score lost its team power points and was replaced by yours. chew*'s score was made with GTX480s though so both scores are receiving ~6 hardware team power points. Your AM3 score on the other hand gave us the entire 22.6 + 6.1 points since we didn't have a 3x AM3 submission before. To make a long story short, this morning we were at 23620 points iirc, now we're at 23691 points, but this includes G.Foyle's 7970 submission as well. As you see, it's not that easy...

[G.Foyle]

Congrats Steve, you are now the king of Q9550 :)

[badatgames18]

Yesterday I tested one of my Christmas presents, a GEIL EVO TWO kit, rated DDR3-2000 CL6-9-6 @ 1.65V. It looks like a very nice kit, decent quality for the price. The heatspreader is very heavy, you can feel that some real copper was used. I can definitely recommend this kit.

http://img689.imageshack.us/img689/7581/ddr31600686201tgeilevot.jpg

I've also received a second 2000C9D kit, but these HCF0 are not half as much fun in dual-channel as they are in single channel. No high clocks were possible for me, my D9JNL were much better. :(

http://img17.imageshack.us/img17/5019/ddr32000999272tcorsair2.jpg

@Hondacity: I'm hoping for old tech's prices to drop as well, although I still want to bench my LGA775 chips I want something new to play with. And I need a new platform to max out my Hyper and PSC kits anyway. :D

nice don_dan!
also looking forward to something new that will be friendly to hypers lmao

ivb is suppose to have a revamped imc?

anyways.. started using gtx2s for 24/7... was wondering if i should just use them for benching (i read something about them not being good daily DIMMs due to degrading or something)

full install win7 sp1 x64
http://img233.imageshack.us/img233/1065/alglkjaa.png


stripped 2k3.. a few tweaks.. seems like disabling paging executive with lsc works better than just lsc
w/paging and lsc
http://img856.imageshack.us/img856/273/test3ix.jpg

with only lsc i got 7:17.. in my other hdd (forgot to put on thumbdrive :() give me a few minutes.. :p:

EDIT:

just lsc.. (not much better than stock)

http://img109.imageshack.us/img109/3578/test1wi.jpg

[l0ud_sil3nc3]

Steve that is a beautiful screenshot:up:

so we all need to benching different things is what I get out of this, stuff that we don't all ready have high scores in.

I know there was a list in the lounge but I am not sure if that will work on rev 4.6, guess we just have to look through the bot and find out what our weak area's are.

[Hondacity]

My weak area is not benching the hardware that I've amassed lol

[Mafio]

congrats SteveRo for all those golden cups with the 9550 :clap:

[SteveRo]

Thanks guys!

I have a Q6600 that I haven't completely tapped out yet - I should probably give that a better try sometime soon :)

[Hondacity]

Solid Snake is back with FirePower!

I wonder when he started benching for Team.XS its seems like forever though.

[Don_Dan]

nice don_dan!
also looking forward to something new that will be friendly to hypers lmao

ivb is suppose to have a revamped imc?

anyways.. started using gtx2s for 24/7... was wondering if i should just use them for benching (i read something about them not being good daily DIMMs due to degrading or something)

full install win7 sp1 x64

stripped 2k3.. a few tweaks.. seems like disabling paging executive with lsc works better than just lsc
w/paging and lsc

with only lsc i got 7:17.. in my other hdd (forgot to put on thumbdrive :() give me a few minutes.. :p:

EDIT:

just lsc.. (not much better than stock)

Thanks mate, but I need a better platform to test those PSC, spec speed is only possible in single channel mode, the NB is too weak for 4GB memory at sane volts and ambient cooling.
I wouldn't hope for IVB to be better with Hypers, I think CPUs will always favour high latency high clock chips from now on.

Did you test waza with lsc and paging enabled/disabled?


so we all need to benching different things is what I get out of this, stuff that we don't all ready have high scores in.

I know there was a list in the lounge but I am not sure if that will work on rev 4.6, guess we just have to look through the bot and find out what our weak area's are.

The list is still quite accurate, and it shows us that we have to do the full set of benches when we have some hardware on the test bench. For example MTP04 posted some nice E6700 scores some weeks ago, but we're still lacking scores in some benchmarks. This is just one example, there's still a lot of stuff where we can get "easy" points.


My weak area is not benching the hardware that I've amassed lol

Me too... :rolleyes: :rofl:


Solid Snake is back with FirePower!

I wonder when he started benching for Team.XS its seems like forever though.

He has been with the team for a long time, he's rarely posting but always contributing scores and points! :up:


By the way, nice benching Mafio and Solid Snake! Great work with the 7970 G.Foyle, do you plan to dust off the 990X for 03, 05 and maybe 06?


Oh and OCN/Bench Tec just kicked us out of Top 10! :(

[G.Foyle]

do you plan to dust off the 990X for 03, 05 and maybe 06?
Definitely, but time is limited and Vantage/Heaven/3dm11 are the priority right now.

[Hondacity]

I'm still waiting for 3930ks and the 7970s lol its been oos for 2 weeks now

I think our team has matured that we can easily get top10 back. Linuxfan has to start benching again :D

[Hondacity]

a few more benchmarks and we break the 24k mark for team points

then we drop the 7970 Hw[bomb]points after it gets restocked lol

woooo

[cnzdrn]

Hi,
as agreed with Daniel (Don Dan) i'm entered on xs team.
My name is Adriano, I'm Italian and I have a bad English :)
I'll try to give my contribution to the team.

[MTP04]

Welcome to the team Adriano!

[Hondacity]

welcome aboard! :D

[Hondacity]

FYI MSI 7970's are in stock @ newegg :D

[ZenEffect]

Welcome Adriano!

[cnzdrn]

Welcome to the team Adriano!


welcome aboard! :D


Welcome Adriano!

Thanks to all :)

[Don_Dan]

I think our team has matured that we can easily get top10 back. Linuxfan has to start benching again :D

Linuxfan is very busy with a lot of other stuff right now. ;)


Hi,
as agreed with Daniel (Don Dan) i'm entered on xs team.
My name is Adriano, I'm Italian and I have a bad English :)
I'll try to give my contribution to the team.

Welcome on board Adriano! :welcome:

[Hondacity]

i hope that stuff is hardware related lol

[SteveRo]

Hi,
as agreed with Daniel (Don Dan) i'm entered on xs team.
My name is Adriano, I'm Italian and I have a bad English :)
I'll try to give my contribution to the team.

Welcome to the Team Adriano!! :up::up::up:

[ZenEffect]

Here is what I dont get.....

Most people from Europe who claim to have "bad english" actually are more gramatically correct than most of us in the US.

Just an observation, dont short change yourself Adriano, your English is great :)

[cnzdrn]

Welcome to the Team Adriano!! :up::up::up:

Thanks Steve. PS When I'll have 7970 I'll try to improve results with PCMark05 :)


Here is what I dont get.....

Most people from Europe who claim to have "bad english" actually are more gramatically correct than most of us in the US.

Just an observation, dont short change yourself Adriano, your English is great :)

Thank you Mr ZenEffect :)
Google helps me :P
I think it's normal speak differently when you use your language.

Today I improved 3 results, in the next days I'll try to complete tests.

[Hondacity]

woooo we've gone over 24k :D

@cnzdrn hey you're subzero..thats cooool

[cnzdrn]

I miss the ocp on 5870 XD
But tomorrow comes my Powercolor 7970 :P
Finally I found a great 2700k.
This weekend will be fun :)

[Hondacity]

@cnzdrn

here's a competition you can get scores from http://www.xtremesystems.org/forums/showthread.php?278516-XS-HWBot-Competitions-Thread-2012

just waiting for the 7970s today :devil:

can't wait to test the new Afterburner :D

[cnzdrn]

I need a new contract for nitrogen :(
It's better if I end up with the 4870x2, 5870 and gtx280's before using 7970 :)
@ honda
I can do with the Sempron for 06 single core..
PS looks mp.

[Hondacity]

what is mp?

yeah single core too :D

[cnzdrn]

what is mp?


Messaggio Privato :P

[Don_Dan]

woooo we've gone over 24k :D

Something isn't working right, most of Adriano's results aren't getting ranked.


what is mp?

I think mp = messaggio personale = PM. :D

^ Well, almost correct. ^^

[cnzdrn]

All my old results are not counted.
I have many with amd 462, hardware not used by other xs users :)
Theoretically all points in more!

[Hondacity]

try recalculate under "my profile" it might fix it

[cnzdrn]

I tried, but not change.
Daniel tried with the team account, but not change.

[El Gappo]

It takes a while, just need to wait. Mine took over a week...

[Hondacity]

Good info el capitan!

@D_D

You bringing Se[XS]y back? I mean top10 :D

Can't wait for us to overtake MShrimps and possibly OCN

[Hondacity]

we might be losing 200pts due to some events... i hope it gets resolved.

here's the new inspector http://downloads.guru3d.com/downloadget.php?id=2612&file=1&evp=ba62db7eeaba59106a67c513e8018e68

mod table should be easy cut and paste...

[Hondacity]

Afterburner 2.2.0b11 for Reference 7970 (http://downloads.guru3d.com/downloadget.php?id=2842&file=4&evp=e5787fefcb2fb510c7cde740963762f0)

[cnzdrn]

Today I took my first results with the 7970.
Afterburner b11 works well :)
http://www.hwbot.org/submission/2244107_
http://www.hwbot.org/submission/2244109_
http://www.hwbot.org/submission/2244111_
http://www.hwbot.org/submission/2244113_

[SteveRo]

^^ Alright! Good start! :up::up:

[cnzdrn]

^^ Alright! Good start! :up::up:

I've tried pcmark05 today. http://www.hwbot.org/submission/2244492_
But I've some problems...
Overrider does not work, virus scan is low.
I will try to change the parameters of the storage, and use Vista :)

[SteveRo]

^^ good start! great clock on the SB and vga. Maybe overrider doesn't work for 7970 :shrug:

[ZenEffect]

andre noticed the same thing when testing 01 iirc. i dont have a 7970 to try anything with... yet.

[Don_Dan]

Nice work guys, we're back in Top 10!

http://img337.imageshack.us/img337/7602/teamrankingjanuary24th2.jpg

I check out all of your scores, I'm just very busy at the moment so you won't see me post very often. Hondacity still pushing the GTX580s, cnzdrn working on PCMark 05 and 7970 and SteveRo fighting against nzaneb and IMOG from OC Forums in his favourite benchmark. Great work! :clap:

[Don_Dan]

Oh no, we're back to #11 again. :(

http://img684.imageshack.us/img684/2329/teamrankingjanuary27th2.jpg

[SteveRo]

^^ I will post a few things later today :) :)

[Don_Dan]

Good luck! ;)

[Hondacity]

With the comp I won't be gaining points lol

[Mafio]

i got the FX-4100 back from RMA, it did 6 GHz with easy at single stage.
this month i will be really busy with exams at university, then i'll freeze this sucker and also the FX-8120 hoping for another big 8. :D

1M :: 14.204s - FX-4100 @ 6000.4 MHz - G.Skill PC317000c8 @ 1217 MHz 8-8-7-22 1t

http://mafio.host56.com/imagehosting/?dm=JWP8 (http://mafio.host56.com/imagehosting/?pm=JWP8)

[Solid Snake]

WOW now we are back to #11 ...... more more more OC.

yesterday I bought a ASUS Crosshair V and a FX CPU, I will be doing OC this day.

[Mafio]

nice choice, despite the poor performance BD is really fun to bench. :D

[Solid Snake]

hahahaha X2

but I don´t have money to buy a Sandy E =P

[Hondacity]

nice to see you posting here snake! and mafio :D

i'm prepping for the comp and then some amd'ish benching :D

[Don_Dan]

Thanks to SteveRo's new PMark 05 3x record we're back to #10! :up:

The last time I looked we were at ~24250 points, somehow we're at 24352.74 points now, that's even better. :D

Edit: Adriano, your team contribution is now correct. Next stop 25k! :yepp:

[Hondacity]

25k wooo

[cnzdrn]

I finally got the points for the team :)
I hope Z68 GD80 will solve my problem with sandy!
PS does not seem far away the 25k :P

[Hondacity]

is that your 3rd board?

[cnzdrn]

This will be the second.
In 2011 I was working away 9 months, 7 months in brazil and 2 months at 500km from home.
I had little time for my hobbies :(

[Hondacity]

I'm also away from my house at the moment lol. 415Km

6days and counting :D hotel points woo

I love the the hotel :D

[Don_Dan]

Nice pics (http://www.xtremesystems.org/forums/showthread.php?222829-Rig-Pics&p=5046013&viewfull=1#post5046013)! :up:

[ZenEffect]

nice pics indeed!

i would do the same, its more of a trophy than a tool... like a gold plated ratchet or something :)

[Don_Dan]

We are now ranked 9th in the Team League! :)

[Don_Dan]

http://img213.imageshack.us/img213/9472/25kpoints08022012.jpg

:bounces::bounces::bounces::bounces::bounces::boun ces::bounces::bounces::bounces:

:toast:

[Hondacity]

wooo :D

[Hondacity]

Alert!

F**X bomb :D

http://i24.photobucket.com/albums/c5/hondacity25/555b9fc7.png

Awesome work Solid_Snake

[SteveRo]

^^ Well done Solid Snake!! :up::up:

[Solid Snake]

hahaha thanks mates I will play now with Dry Ice =P

[Hondacity]

I just realized those were not subzero ..wtf!

Alert level 3! :D

dude you do the tweakings on air. now you do subzero. you do it correctly and i like it :D

[Solid Snake]

=) thanks mate, I don´t like the FX CPU but is fun overclock it xD.

[Don_Dan]

http://img3.imageshack.us/img3/7296/topscoresfebruary13th20.jpg

Nice scores guys! :up:

I missed SteveRo's excellent PCMark05 score he uploaded just a few minutes ago, but here's a link (http://hwbot.org/submission/2253530_stevero_pcmark_2005_fx_8150_41278_marks). :)

[Solid Snake]

XtremeSystems FTW.

Great scores team.

[Hondacity]

Gold mine!!!

I'm very happy you guys are benching :D

[l0ud_sil3nc3]

I am dying waiting for some 7970 Direct CU II's to hit the egg again as I missed the first batch:( so trying to bench older stuff that was just sitting around:D

[Don_Dan]

Looks like we lost a few posts. Again, I want to congratulate SteveRo for making it to #6 worldwide and #1 in the US in the OC League! :up:

http://img813.imageshack.us/img813/4596/steverohwbotking.jpg

[SteveRo]

^^ Thanks and yes already dropped back to 10th! :rolleyes:

[Hondacity]

stevero man you got lots of competition, give em pain :D

I'll get back to benching again after the feb_comp

[Hondacity]

goal!!!

124314

[l0ud_sil3nc3]

goal!!!

124314

haha so leet buddy:D

I love it, you killed it this month in the comp, and it was all you man, great job!

[Hondacity]

thanks man

next goal is some team points. hopefully i beat stevero for team contribution :D he's got quality I got quantity(except time which means I have to be efficient)

as for two comps right now:
buy gigabutt board? NO
buy ABit Board? NO lol

[Don_Dan]

I agree, we have to push for team points now, I'll get at it after my last exam too. This month's Overclocking Challenge isn't very interesting for our team anyway, we just don't have any old school guys who still have these boards and I don't think anyone feels like hunting for an Abit Slot 1 motherboard...

[Mafio]

if i will have time (university, you know...) i will join Gigabyte contest.

[ZenEffect]

i can do 775 ref clock. got a high fsb E8400.... and an abit ip35-pro just sitting there waiting to die (1 chan of memory does not work so board went to the "pile o bits" corner)

[Hondacity]

i can punish that board :D

[Hondacity]

kingpincooling rocket base check!

[Don_Dan]

Getting ready for Ivy Bridge? :D

[Movieman]

Getting ready for Ivy Bridge? :D
Don't even say that word!
You want the NAZI'S out after you?:rofl:

[Don_Dan]

You mean the evil Frenchman, don't you?! :rofl:

[Hondacity]

Getting ready for Ivy Bridge? :D

indeed captain!

the best no cb pot :D thanks to vinbo!

Oh come on you guys, our LIVE friend will be sponsoring competitions here in the USA. :D

-asrock + intel
-asus + intel
-msi + intel
-gigabyte + intel, but this is most of the time for a select few. i wish they change they're evil ways

this year will be crazy i hope lol

[Don_Dan]

Yes, I'm sure he will.
And if you don't play nice with Intel he won't give you samples from now on. Wait, that's already the case now... :ROTF:


Evil ninja-edit! :p:

PS: I'm downloading the file right now. Thanks!

[Hondacity]

Good to know Capt.

Oh yeah for everybody else. Filefactory is still available for filesharing :D

[Don_Dan]

Ya, first time in 3 weeks I can relax and spend some time on the forums... :)

One more exam in two weeks and after that: Benching. :D

[l0ud_sil3nc3]

Don't even say that word!
You want the NAZI'S out after you?:rofl:

lol shhhhhh:rofl:

[SoF]

Don't even say that word!
You want the NAZI'S out after you?:rofl:

IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE IVY BRIDGE

I am a young German and fighted for tolerance and acceptance with several projects 10 years ago, so I am not afraid :D

[Don_Dan]

I fight for correct grammar and spelling! :p:

By the way, shouldn't you be sleeping already? It's late. :D

[Hondacity]

edit.... comp list for this year ? :D

-asrock + intel
-asus + intel
-msi + intel
-gigabyte + intel
-evga + intel

[Don_Dan]

What happened to OC_Windforce's Ivy Bridge thread?
Was it deleted?! It's still on HWBot and OCX.

[MTP04]

What happened to OC_Windforce's Ivy Bridge thread?
Was it deleted?! It's still on HWBot and OCX.

I was looking for it too and can't find it. I guess the Frenchman got his wish...what a shame.:shakes:

[Movieman]

What happened to OC_Windforce's Ivy Bridge thread?
Was it deleted?! It's still on HWBot and OCX.
Yes

I was looking for it too and can't find it. I guess the Frenchman got his wish...what a shame.:shakes:
Nothing to do with the Frenchman beleive me.
If he was the only factor it would still be there.

[Dumo]

kingpincooling rocket base check!KP's venom pot probly will work if no CB:)

[Don_Dan]

I was looking for it too and can't find it. I guess the Frenchman got his wish...what a shame.:shakes:

Let me know if you want to see the screenshots. There's also a new screenshot of 1M at 6.9GHz in the HWBot forum.

Dave, I didn't like that this thread was quickly censored while it's still available on many other pages. This casts a poor light on XS in my opinion.

Well, that's just my two cents, back on topic:

Nice benching Aerou! :up:


Edit: 2500th post! :)

[Movieman]

Let me know if you want to see the screenshots. There's also a new screenshot of 1M at 6.9GHz in the HWBot forum.

Dave, I didn't like that this thread was quickly censored while it's still available on many other pages. This casts a poor light on XS in my opinion.

Well, that's just my two cents, back on topic:

Nice benching Aerou! :up:
I understand but:
1) What other forums or sites do is their call not XS's
2)Let's be honest, he knew that showing IB benches would cause issues
3) It became a flamefest
4) Wasn't my call although I agreed with the decision.

There are times in life when things are done that we don't always agree with but they are done for the "greater good" and I think that was why this one was deleted.
I love to see this stuff as much as anyone but XS is a place that draws a lot of interest not only from individuals but from companies.
In this case and this is just my guess, the thinking may have been do we here want to piss off one of the biggest companies in the world over one thread?
Also if it's any consolation that thread was up for what? 14 hours. I think most saw what they wanted to see.;)

[BeepBeep2]

I gained 18 hardware points tonight, added about 25 for the team just messing around on water cooling.

I have a pot (Kingpin Venom Rev. 5.0 with all AMD/Intel mounts through 1366/1155) but no money for LN2. If there are any wealthier people among us that would give me enough cash, old parts, whatever (I am 16 and jobless,) to get points, sufficient DICE or better yet LN2 from local PraxAir or AirGas I would appreciate it greatly. I've done DICE once before, but I know I have a tendency to get a bit "snobby" on the forum here.

http://www.hwbot.org/user/beepbeep2/#Points

http://www.xtremesystems.org/forums/showthread.php?279750-FX-Crossfire-HD5770-warm-ups-32M-Heaven-06-Vantage-11-results-on-water-air


Warming up for DICE...still need to run a few of these to finish up both single card/dual card. Due to the amount of results I've left out screenshots.

The 3DMark06 result is so poor due to GPU performance under FX, just under 22K at the highest speed I can run the CPU test, Phenom II X6 does a consistent 24K on air cooling...

Test setup:
AMD FX-8150 8-Core Processor @ 5.01 to 5.3 GHz
Dual Sapphire Vapor-X AMD HD5770 Cat 11.11
4GB GSkill Pi Series DDR3-2133 CL7 @ 2000 6-9-6-24 1T - 2223 6-10-6-24 1T
Seasonic M12 based PSU, 850w 80Plus Silver
Win7 x64 Pro

SuperPi 32M -

15m 25.628s - 1st Place AMD VISION (32nm) non-subzero cooling
CPU Speed - 5281 MHz / 2501 MHz,
DDR3 Speed - 2223 MHz 6-10-6-24-36 110ns 1T
http://www.hwbot.org/submission/2265581_

3DMark06 -

2x HD5770 - 21984 3DMarks #105th Place <---this is how weak FX is in single thread / CPU limited 3D.
CPU Speed - 5017 MHz / 2508 MHz, DDR3-2006 6-9-6-24 1T
GPU Speed - 1020 / 1350
http://www.hwbot.org/submission/2265589_

3DMark Vantage Performance Preset -

2x HD5770 - 22266 3DMarks #28th Place
CPU Speed - 5017 MHz / 2508 MHz, DDR3-2006 6-9-6-24 1T
GPU Speed - 1020 / 1350
http://www.hwbot.org/submission/2265585_

3DMark11 Performance Preset -

1x HD5770 - 3365 3DMarks #34th Place
CPU Speed - 5017 MHz / 2508 MHz, DDR3-2006 6-9-6-24 1T
GPU Speed - 1015 / 1375
http://www.hwbot.org/submission/2265579_

Unigine Heaven HWBOT Benchmark Basic Preset (DX9) -

1x HD 5770 - 1511.63 DX9 Marks #17th Place
CPU Speed - 5077 MHz / 2538 MHz, DDR3-2030 6-9-6-24 1T
GPU Speed - 1015 / 1375
http://www.hwbot.org/submission/2265574_

2x HD 5770 - 2823.05 DX9 Marks #1 Place
CPU Speed - 5077 MHz / 2538 MHz, DDR3-2030 6-9-6-24 1T
GPU Speed - 1005 / 1370
http://www.hwbot.org/submission/2265569_

Unigine Heaven HWBOT Benchmark Xtreme Preset (DX11) -

1x HD 5770 - 568.72 DX11 Marks #31 Place
CPU Speed - 5077 MHz / 2538 MHz, DDR3-2030 6-9-6-24 1T
GPU Speed - 1015 / 1375
http://www.hwbot.org/submission/2265576_

2x HD 5770 - 1123.02 DX11 Marks #7 Place
CPU Speed - 5077 MHz / 2538 MHz, DDR3-2030 6-9-6-24 1T
GPU Speed - 1010 / 1360
http://www.hwbot.org/submission/2265564_

[Hondacity]

KP's venom pot probly will work if no CB:)

i wonder if it will fit 1155 mounting. full pot means maximum insulation. it won't be as cold but yeah it will definitely work.

[Hondacity]

BeepBeep FTW!

Hardware collection is a process. It took me years to accumulate. We'll get you on board with the ln2 pricing hopefully it gets extended to you.

[Mafio]

looks like i've borked another kit of RAM...
the supercrazy Micron PC2700 kit died while doing super-pi 1M at 250 MHz 2.5-2-2-6 1T at only 4 volt :D
gotta put them in the freezer.

anyway, i've a kit of corsair PC3500 BH-5 super dupah crazy stuff on the way, just hope to not kill them in the first hour of benching. lol

while killing stuff i found the time to test my new 9.99 € CPU :D
ain't that bad, isn't it ?

http://valid.canardpc.com/cache/screenshot/2298272.png

http://valid.canardpc.com/show_oc.php?id=2298272

[Hondacity]

Ram killa

[Don_Dan]

@BeepBeep2: Nice scores and decent clocks on the RAM, Vdimm north of 1.80V?

@Mafio: You're a killer! :D
I've got some 3500C2 as well, keep me posted on the clocks you can get.

[BeepBeep2]

@BeepBeep2: Nice scores and decent clocks on the RAM, Vdimm north of 1.80V?

@Mafio: You're a killer! :D
I've got some 3500C2 as well, keep me posted on the clocks you can get.
1.793v in BIOS, probably about 1.82v real. 1.7v to be safe for the 3D runs. CPU just won't go.

[Dumo]

From all the IB info in the wild it seems a good idea to hold on to good clocker 2X2gb rams now

[ZenEffect]

From all the IB info in the wild it seems a good idea to hold on to good clocker 2X2gb rams now

psc & bdbg ftw? i think im covered ;)

im curious to see how bbse does on ivy.

[Dumo]

Wanna go shopping @ F/S threads down here..thres a bunch of good 2X2 rams on sale:up:

From M5G bios thread posted here theres a couple of BBSE preset profile settings on its dram tweak section...the tighter the better I guess:D

[Mafio]

i'm curious to see what hypers will do with ivy :p:

[Hondacity]

Im guessing lots of dead sticks lol

[Mafio]

as long as they aren't my sticks i'm ok with that :D

[BeepBeep2]

@Hondacity
(since I see you lead the team HWBOT FX mem clock)
Does FX IMC scale with cold for Memory Clock?
This CPU has a weak IMC. I can't boot Dual Channel 2400+ on any of the 4 slots. However I can run 32M up to 2650 uncore.
http://valid.canardpc.com/cache/banner/2300045.png (http://valid.canardpc.com/show_oc.php?id=2300045)

EDIT:
Slot 1 did about 2500 MHz
Slot 2 did 2661
http://valid.canardpc.com/cache/banner/2300137.png (http://valid.canardpc.com/show_oc.php?id=2300137)
http://www.hwbot.org/submission/2266344_beepbeep2_memory_clock_ddr3_sdram_1330.4_m hz
Slot 3 BSOD'ed when I hit 2400
Slot 4 did about 2500 MHz, but I was using settings that also failed Slot 2 around there.

[Don_Dan]

Good stuff BeepBeep2! It should scale from cold on the CPU. This is the 1066MHz 7-10-7 kit, isn't it?

[BeepBeep2]

Good stuff BeepBeep2! It should scale from cold on the CPU. This is the 1066MHz 7-10-7 kit, isn't it?
Yeah, I've got one kit of D9, 2 PSC, and 1 Hyper now...though the D9 are pretty useless. XD
RipjawsX 1600 CL6 was certainly nothing special.

I've got quite a bit of DDR2 though, one STT 800 CL4 kit with ProMOS, does 1100 CL4 and two kits of GSkill DDR2-800 HZ D9GMH I need to bin for my Athlon 64 X2 5600.

I asked if the IMC scaled because I still have a bit of uncore headroom. I can hit almost 2800 with this CPU's CPU_NB but that was the highest RAM frequency I could achieve. AFAIK IMC is never really something to gain headroom with cold on the CPU, but I haven't tried Bulldozer cold yet.

[Don_Dan]

You're starting to get a real nice collection.
After searching for DDR2 for a long time I'm concentrating on DDR3 now, I just found some decent value sticks on ebay. BBSE, BDBG and some PSC. I just hope I can get them for cheap. :D

Haha, another ninja-edit. Those ProMOS are decent, but the 800HZ were only a mediocre bin, Crucial 5300 clocked equal most of the time. What voltage do they need for 500MHz CL4 and 600MHz CL5?


http://img577.imageshack.us/img577/4849/topscoresmarch18th2012.jpg

Hondacity is benching a 4870 and scoring some nice points, but we want MOAR! ;)

[Hondacity]

@Beep

The fx adventure was limited coz of coldbug lol, thats on hold hopefully the bd is still around after fiddling with ivy and mvp madness

hmmm maybe i'll play more 2d since 3d is on hold. good stuff

@DD

Woooo thanks capt. Oh btw the 3d06 is not getting points. I don't know why. I already forwarded the result to a staff online 9hours ago but it still isn't giving me silverware :D

no cb on the 4870 was soo fun. I think I'm the only one using the asus gpu which has a decent vrm but ovp kicks in @ 1.5v.

[Don_Dan]

I'll have a look. :)
Edit: I think it's broken: Failed to synchronize rankings: Failed to select a row. :shrug:

Isn't there an OVP mod for this card?

[Hondacity]

ok I'll delete it and upload a new one.

I'll have to redo this card some other time. OVP fix would make this gpu fly. No artifacts were encountered during benching.

I finished 25L with it and sandy on ln2 too lol. X48 here I come :D

[Don_Dan]

Please do so and let me know if it works!

Just post some pics in the modding section, maybe we can work something out. Or did you try to find a mod already?

Which chips are on your list for S775 benching?

[Hondacity]

chips? lots lol 8600/8500/8400/7200/6600/6400/6300 not yet sure if the x48 is best with them. P45 is ok too.

same error message after deleting the result and uploading a new one.

"failed to select a row" maybe there is a limit in the database?

[Don_Dan]

Sounds like my collection, and very similar to Linuxfan's collection too... :rofl:

The E8500 category needs some work and the E8400 category is still missing WPrime and UCBench...

I tried to fix it but it didn't work, I'll report the submission to the moderators. :shrug:

[BeepBeep2]

Haha, another ninja-edit. Those ProMOS are decent, but the 800HZ were only a mediocre bin, Crucial 5300 clocked equal most of the time. What voltage do they need for 500MHz CL4 and 600MHz CL5?
I've had them in the drawer since 2010, the ProMOS kit is from 2007...right when supply of D9 was dwindling. I bought the D9s second-hand.

I can't remember exactly what they need for 500 CL4 and 600 CL5, but it was quite a bit. I could barely do 800 3-3-3-5 @ 2.4v with them. The ProMOS kit doesn't touch CL3, but does 4-4-3-5 up close to 550.

[Hondacity]

Its just one of those days. Submissions don't work.

oh and HWB is slow today lol

[Don_Dan]

Yeah, that's a lot. The best D9 I've tested so far needs 2.13V for 400MHz 3-3-3-9, the best D9 I've ever seen on a forum needs less than 2.05V. My benching Anniversary Kit that has been used at 2.7V for quite a while needs 2.22V, but it hasn't degraded so far.
I still have some untested kits waiting to be binned, a 6400HZ kit is one of them. ;)

@Hondacity: You broke it! :P

[ZenEffect]

nice benching on 4870 Rob!

looks like nature is the only thing holding you back in 01

[Hondacity]

Oi what did you do with 124k 3d01? I was benching @ 1120mhz on CL but only 1080 for nature. result was 120k lol. I got 122k just selected the 8. setLOD didn't help.

[ZenEffect]

skype?

I was also limited to dice on gpu as well... on a slim!

[BeepBeep2]

3D Benches not to run on Bulldozer under any type of cooling
3DMark01 - 06
I assume '03 will be bad, 05 and 06 are slower with HD 5770 @ 1025 and FX-8150 @ 5.2 GHz than HD 4850 @ 840 and Phenom II X4 @ 4 GHz.

I'm out of thermal paste, or I would swap to my 1100T for these benches...which should do 4.3-4.4 on water.

[Dumo]

I'm out of thermal paste, or I would swap to my 1100T for these benches...which should do 4.3-4.4 on water.Tooth paste for emergency:D

[BeepBeep2]

Tooth paste for emergency:D
Hahaha no way, I'd rather run with a naked IHS XD

I realized I live (dangerously close) to IMOG, which gets his LN2 (from Airgas that quoted me 2.50?) while driving with the windows up(!) for .50/L somewhere in the area. I PM'ed him on HWBOT. :)

[Mafio]

as for FX IMCH scaling under cold with my CPUs i have a big gain going from air to SS but no gain from SS to LN2.
i had my best memory clocking results at phase and V-IMCH 1.8 +/- volt (then the CPU died).
at least contrary to what deneb/thuban did FX IMCH don't get worse when cold.

p.s. another bunch of socket 939 CPUs on the way :D

[BeepBeep2]

as for FX IMCH scaling under cold with my CPUs i have a big gain going from air to SS but no gain from SS to LN2.
i had my best memory clocking results at phase and V-IMCH 1.8 +/- volt (then the CPU died).
at least contrary to what deneb/thuban did FX IMCH don't get worse when cold.

p.s. another bunch of socket 939 CPUs on the way :D
Thanks!

I really had a struggle with Hypers and Thuban, even on dry ice when I was benching for OC.net competition. I could do 2000 6-6-6 for Sandra bandwidth on air with 1.9v but got stuck around 1850 when the CPU was on DICE. :(

[Don_Dan]

You gotta love it when you ask a seller "could you please tell me what's written in the last line on the IC, the code probably ends with A3G-something?" and the reply is "that's correct, the code ends with A3G-U." :clap: :D

[l0ud_sil3nc3]

Hahaha no way, I'd rather run with a naked IHS XD

I realized I live (dangerously close) to IMOG, which gets his LN2 (from Airgas that quoted me 2.50?) while driving with the windows up(!) for .50/L somewhere in the area. I PM'ed him on HWBOT. :)

just be sure to get a copy of the receipt posted over at oc forums.

[BeepBeep2]

just be sure to get a copy of the receipt posted over at oc forums.
Hmm, will do. Though I talked to him and apparently mentioning his name should be enough, considering he goes in multiple times a week and I'll probably be going to the same AirGas.

I might try to price match a closer location first. :D

[TheGoat Eater]

if they don't help at airgas with your own account - maybe he would fill yours on his account :S - :D

[BeepBeep2]

if they don't help at airgas with your own account - maybe he would fill yours on his account :S - :D
Haha, I'd be pretty mad if they didn't, considering I'll walk in with one of his receipts from the same location :D

He said he could get the location twice as close to me (20 min vs 50) to price match the .50/L but for some reason they wouldn't let him put the dewar in his car? He said he had to go back inside and get a refund O_o

[l0ud_sil3nc3]

congrats SteveRo for taking back the PCMark05 WR!

[Don_Dan]

Nice score (http://hwbot.org/submission/2267426_stevero_pcmark_2005_core_2_e8600_%283.33gh z%29_41785_marks) SteveRo! :up:

HWBox Hellas O/C Team is still in front of us though, we need some points! :p:


This morning I scored 4x1GB BBSE value sticks on ebay for 10 bucks. :D

[Don_Dan]

http://img220.imageshack.us/img220/5568/topscoresmarch27th2012.jpg

Nice work Linuxfan! :up:

[l0ud_sil3nc3]

very nice work Linuxfan!

[Hondacity]

Boomtastic!

[SteveRo]

Well done Daniel!! :up::up:

[MTP04]

Good to see Daniel back in action!:up:

[Mafio]

today i tried another 2 faildozer chips, both are crap :D

[l0ud_sil3nc3]

today i tried another 2 faildozer chips, both are crap :D

tried two llano chips and had a question Mafio, should I be able to max clocks on a single stage or do they scale with cold?

my ss runs about -50.

one things for sure they do clock memory very well.