View Full Version : What to expect?
Svenn
08-07-2002, 02:24 AM
Okay, I haven't had a whole lot of time to mess with my new system, but I am running at just over 2Ghz at 185 FSB. Memory timings are at 2-3-5-3-1t. Video Card (Ti4600) is at 320/715... Are these right or are they low? And what kind of 3dmark score should I get with this? Last run was just over 11,000. Any suggestions?
TheDude
08-07-2002, 06:11 AM
YES I have several.....try to remember to eat at least 1 meal a day....sleep is also very important and can be done while overclocking as long as your body does not come in contact with the keyboard...and last....showering depends directly on the number and proximity of other household occupants.
Remember these basic OC tips and you will be OK. Hope this helps!:D
Entuscan
08-07-2002, 06:22 AM
:D :smileysex :D
Damm TheDude, that's my OC-Bible :rolleyes:
TheDude
08-07-2002, 01:24 PM
Didn't mean to trash your thread by joking...
The 185 fsb with tight timings, especially the 1T is very good in my opinion..I can't speak to the video scores as I have little experience there. How about it...3d guys?
I joked above because I have seen you really getting into this lately...that's good because that's the kind of dedication it takes to get those high scores. I hope you took in the way that I intended. ;)
MrIcee
08-07-2002, 02:01 PM
Best performance with the KX7 is obtained with 1 stick of ram capable of 200Mhz with all timings maxed. At your current Mhz level and vid card clocks....but running 200Mhz maxed timings you'd be squarely in the 13,000 range. Running Windows 2000(XP sucks in 3DMark for an AMD system), 4.37 4 in 1's and 29.42 drivers are a big boon to scores. Tho I'm running much higher vid card clocks, at 1196mhz I'm scoring 11,865. Tweak up your drivers also with Rivatuner. It takes alot of patience and tweaking of the KX7 to get where you want to go....keep at it..good luck my friend:)
Randi:D
spaceboy
08-08-2002, 02:46 PM
Originally posted by MrIcee
Best performance with the KX7 is obtained with 1 stick of ram capable of 200Mhz with all timings maxed. At your current Mhz level and vid card clocks....but running 200Mhz maxed timings you'd be squarely in the 13,000 range. Running Windows 2000(XP sucks in 3DMark for an AMD system), 4.37 4 in 1's and 29.42 drivers are a big boon to scores. Tho I'm running much higher vid card clocks, at 1196mhz I'm scoring 11,865. Tweak up your drivers also with Rivatuner. It takes alot of patience and tweaking of the KX7 to get where you want to go....keep at it..good luck my friend:)
Randi:D
hi Randi!!
i've got a winbond 2700 stick which doesn't like 1T over 190fsb..
and agressive timings..
but with 2T i reach 210.. 217 instable http://digilander.libero.it/spaceboyz/kx7-217.jpg
and cas 2 3-6-3 1T at 200!
which is faster for a 3dmark score on the KX7?
190 aggressive.. 205 2-5-2 enhance 2-3-2T?