Mosfet to CPU Small Gap

[Prince21]

There is a small gap between one mosfet to another and the CPU, when I try and connect tube it bends therefore restricts flow, kinks etc, anyone have any tips or secrets on how to get this right especially when the gap is really small, without bending the tubing.

There is two tubes I need to do this for:

-mosfet to mosfet
- mosfet to CPU

[dingdong555]

What size tubing are you using?

3/8" ID 5/8"OD shouldn't kink, 1/2" 3/4" may though.

You can always use a 45* - http://www.sidewindercomputers.com/bishsiro45bg.html <-- out of stock. In stock - http://jab-tech.com/Bitspower-silver-shining-Rotary-45-degree-G-1-4-adapter-BP-45R-pr-4341.html
Or if it won't work, a 90* will be fine - http://www.sidewindercomputers.com/big1sishro90.html

[Prince21]

3/8 Tubing, yeh didnt know about the anti kink until I ordered feser tubing, Thanks for the reply, I will look at the bitspower part.

[JOCKTHEGLIDE]

feser has a nice angle also that BP sometimes cant get right with half inch...I will have to post pics of my rampage extreme setup with all the mosfets are WC very very tight angles I tell ya, but not a problem with BP and feser bits...

[NaeKuh]

http://i125.photobucket.com/albums/p73/aigomorla/Haruhi/IMG_1384.jpg

Bitspower to the rescue!