View Full Version : Hot Make Apps
basserdan
03-24-2009, 07:57 PM
Opinions please. What do you recommend for heating up both gpu and cpu at once. My mcr320 and 220 are sandwiched and I would like to see how they perform when both loops are working their hardest. I've run OCCT and Furmark together. Anybody have a better solution? Maybe a single solution (app)?
faster3200
03-24-2009, 08:13 PM
Core Damage for CPU. It gives the hottest temps (although I get same temps with Linx).
OCCT is the only program I know of that can stress both CPU and GPU.
filthysanchez
03-24-2009, 08:22 PM
RTHDRIBL and core damage together
Sly Fox
03-24-2009, 08:23 PM
I use good ole' fashion Prime95 small FFT for CPU.
Furmark for GPU.
Run both at the same time and watch the temps rise. :up:
Johmem
03-24-2009, 08:36 PM
Can you get the GPU core to load 100% with Furmark while Prime95 is running on all cpu cores?
Vatos_locos
03-24-2009, 08:48 PM
yes you can pretty easy but linpack should make the cpu to reach higher temps
Johmem
03-24-2009, 08:53 PM
Hmm, on my system, Furmark will only load the GPU about 50% while running Prime, until I kill one worker (of 8), then it will load GPU to 100%.
However, I get the highest overall system temps with the power supply test on OCCT.
LOUISSSSS
03-24-2009, 08:53 PM
the OCCT: Power Supply Test.
basserdan
03-24-2009, 09:16 PM
Never used RTHDRIBL, I'll check it out. Probably wind up with occt and furmark. What all does the power supply test include? Is it going to run everything at once-drives, memory, cpu, gpu?
LOUISSSSS
03-24-2009, 09:18 PM
Never used RTHDRIBL, I'll check it out. Probably wind up with occt and furmark. What all does the power supply test include? Is it going to run everything at once-drives, memory, cpu, gpu?
yes iirc, it includes CPU/GPU tests and maybe ram all at once.