View Full Version : 1366 920 water blocks
beast200
03-24-2009, 12:45 PM
Hi
Change to 920 @4.2 from E8500
Original had Fuzion v1 and had to make temp mounting for 920 :confused::mad:
temps approx 39idle to 73 max
got fed up waiting for mount and change to EK supreme
poor mounting back plate but good temps
my ddc 3.2 pump was noisy due to the (restriction)
temps smilir to fuzion
Then decided to go for swifttect GTZ
very good mounting but temp up by 3 to 4 C
so @ 42 idle to 73 max
Change again today to Heatkiller v3
Average mounting with backplate but temps 36 idle ang 68 max:up:
pump now very quiet as well:)
not carried under any lab conditions
but all other hardware the same
interesting i hope
now
Hondacity
03-24-2009, 12:52 PM
interesting indeed thanks:up:
Liu Kang
03-24-2009, 01:20 PM
Very interesting, those heatkillers are at the top of my list... both the cpu and gpu (295) blocks.
On that note, I saw a thread on here about the 295 blocks, but can't remember the ETA... anyone?
JackOfAll
03-24-2009, 01:28 PM
Change again today to Heatkiller v3
Average mounting with backplate but temps 36 idle ang 68 max:up:
Yes, that is interesting. I need a HK! ;-)
What VCore you running for your 920 @ 4.2?
Prince21
03-24-2009, 01:35 PM
Where can we buy HK. any non american stores?
JackOfAll
03-24-2009, 02:41 PM
Where can we buy HK. any non american stores?
HK3 @ AquaTuning (http://www.aquatuning.de/product_info.php/info/p5000_Watercool-HK-CPU-LGA1oe-Rev--3.html)
The 19 EURO shipping to the UK hurts a little! ;-)
bigKr33
03-24-2009, 02:46 PM
These hk's seem to perform very well. I'm still in a toss up between the hk 3.0 and the koolance 350. Only concern is if it supports compression fittings, and what size. Still nice results though. I'm amazed by the huge difference.
hlonipha
03-24-2009, 02:47 PM
Hi
Change to 920 @4.2 from E8500
Original had Fuzion v1 and had to make temp mounting for 920 :confused::mad:
temps approx 39idle to 73 max
got fed up waiting for mount and change to EK supreme
poor mounting back plate but good temps
my ddc 3.2 pump was noisy due to the (restriction)
temps smilir to fuzion
Then decided to go for swifttect GTZ
very good mounting but temp up by 3 to 4 C
so @ 42 idle to 73 max
Change again today to Heatkiller v3
Average mounting with backplate but temps 36 idle ang 68 max:up:
pump now very quiet as well:)
not carried under any lab conditions
but all other hardware the same
interesting i hope
now
Look at mines under load :)
idle are 36c-37c
glide 1
03-24-2009, 04:16 PM
wow!! that's a nice oc on that 920 with excellent temps to boot.
No1451
03-24-2009, 07:44 PM
These hk's seem to perform very well. I'm still in a toss up between the hk 3.0 and the koolance 350. Only concern is if it supports compression fittings, and what size. Still nice results though. I'm amazed by the huge difference.
Bitspower 3/8 inner and 1/2 outer fit side by side no problem on mine, if you use a 45 or an extender you likely won't have issues no matter what the size is.
HK3 @ AquaTuning (http://www.aquatuning.de/product_info.php/info/p5000_Watercool-HK-CPU-LGA1oe-Rev--3.html)
The 19 EURO shipping to the UK hurts a little! ;-)
Got mine delivered from there to the UK yesterday :)
beast200
03-24-2009, 11:54 PM
Yes, that is interesting. I need a HK! ;-)
What VCore you running for your 920 @ 4.2?
V core is at 1.4 in bios cpu z 1.376