Finiliazing my WC PARTS

[ILikeCosmosS]

I WILL START WITH THIS!
NO I WILL NOT USE MCP355 WITH TOP!

parts:

2x mcp655 (get extra housing and thread it )
2x 150 ek res
apogee gtz or d-tek v2 1366
koolance or bp x58 nb/sb water block
10 medium yates
4 red led fans i need to get good ones please reccomend
xspc RX360 and Rx240 OR swfitech rads in 240 and 360?
bigNG to control everything
16x 7/16 compression fittings

TUBING: i need red tubing + red additive and blue tubing+ blue additive
feser one , primochill additive
feser tubing, or primochill tubing?

so everything seem all right?

[iro]

why do you bother getting additives when youll be getting colored tubing.?

[zanzabar]

looks fine there are red led yates i would suggest those and the swiftec rad with those fans. and why no 355, u can use a male to male rotery and mount the 355 directly to the EK rez like in the permafrost
http://img53.imageshack.us/img53/4356/permafrostinside13ki3.jpg


why do you bother getting additives when youll be getting colored tubing.?

its so u have color in the rez, i dont like dyes but if u want the aesthetics fesser premix is the best dont use add in dye. and i like primoflex tubing

edit
fans - http://www.petrastechshop.com/12yalod1redl.html

[ILikeCosmosS]

the reason why no mcp355 is because i dont like it and you need some cool place to put it

and i will use male male to rotary with the mcp655

i was thinking medium yates since they will be at the top of the cosmos s pulling in cool air

edit:

do you where i can bp shiny silver compression fittings? i need all shiny silver stuff

oo and whats the diameter of the ek res's ( i need to know because i gotta get a d-link fitting so that i can attach a mcp655, since it will be dual loops 1 pump outlet goes to 360 rad up top and another pump outlet goes to a 240 rad is that possible?)

[Zehnsucht]

Just a heads up for compression fittings:
http://www.xtremesystems.org/forums/showthread.php?p=3540441

Also, Feser doesn't do 7/16" tubing.

[ILikeCosmosS]

http://www.jab-tech.com/Bitspower-Silver-Compression-Fitting-7-16-to-5-8-BP-CPF-CC6-pr-4338.html

7/16 compression fitting
so i guess i am going primochill then

[Zehnsucht]

http://www.jab-tech.com/Bitspower-Silver-Compression-Fitting-7-16-to-5-8-BP-CPF-CC6-pr-4338.html

7/16 compression fitting
so i guess i am going primochill then

Yes, but what I was hinting is that compression on DTeK V2 is limited.
In this case you will NOT be able to put a BP 5/8 OD compression fitting on it without using rotaries.

[evoted]

primochill makes 7/16 - 5/8 tubing. PPC

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=413_292&products_id=24504

[ILikeCosmosS]

i know
but is there any fans that are red leds and give the same cfm as yate loon medium fans?

[Brother Esau]

Get the Feser Xchanger triple and use with low db Yateloon fans

[ILikeCosmosS]

yeah i am not trying to go over 4 grand as it already is so i am going to stick with rx360 because it compatible with cosmos push / pull

[zanzabar]

jab-tech has stronger fans with red led but im not sure on the quality
http://www.jab-tech.com/120mm-Quad-LED-fan-RED-pr-1478.html , http://www.jab-tech.com/Logisys-120mm-fan-Red-Leds-pr-3496.html ,

[biggles1]

Really glad to see you are going with the bigNG. You will not be disappointed! Reinstalled min yesterday with my newly built two loops. One BP temperature fitting for each loop, all fans connected, select curve and everything is running quietly but with extra performance when needed!

Also installed a MCP655 with EK rev2 top. Great performer and noticeably more quiet! Consider getting the EK tops for your pumps! Much cleaner look as well!

[ILikeCosmosS]

actually i was thinking of getting ek tops but i need to spend as less money as i can

by the way is there way to program your bigNG to do something like this:(there will be temp prob on my cpu)

if your cpu goes above 40C kick up your fans to max/medicore speed? can i do that with my bigNG ?

people have been saying to me how are you going to fit two mcp655
they also said that you can go either way if wanted too!

but i would just like to say i would challenge myself with fitting mcp655 then mcp355

[biggles1]

by the way is there way to program your bigNG to do something like this:(there will be temp prob on my cpu)

if your cpu goes above 40C kick up your fans to max/medicore speed? can i do that with my bigNG ?


Don't know the Cosmos so I cannot help you there...

But, the bigNG I can help you with. ;) Yes you can go two routes. The bigNG can talk to Speedfan or MBM and get the CPU-temp or you could attach one of the bigNG temp probes to the CPU/heatsink and let it read the exterior temp. The advantage of the first 1 is that you get the CPU die temp (not the correct one, but at least a temp). Unfortunatly this wonät work outside Windows and Speedfan/MBM must be running. The second option is autonomous from the computer but requires the temp probe and will not measure CPU die temp. Not a big problem, more a matter of taste... Personally I use water temp as guidance for the bigNG's fan control.

[ILikeCosmosS]

so your saying that
i can use my bp probes
if your water temp goes above X increase the 2 fan channel speeds to X
is that what your saying because thats its fine with me
as long as i dont have to worry about it
and i can also do that to my gpu loop as well?

[biggles1]

You got it all correctly! You can add up to four analog sensors, like the bp probes, and make them control up to four different fan channels.

You can even specify 7 different measurement points ( 25, 28, 31, 36, 41, 49 degrees) and make them correspond to different fan speeds. In between the software will make nice, linear curves!

[denice25]

Don't hesitate to use additives.

[ILikeCosmosS]

i wont but can i use pt nuke with color dye

and which color dye should i get primochill(bloodred/steel blue because they are non UV which i want) or feser verisons of those colors ( they will be UV preventing me from using a white cathode)