Intrest in MCW30 universal bracket [Archive]

Planet

02-01-2009, 10:14 PM

As some of you may know this does not fit all the boards out there now. With the recent editions of X38, X48, and X58 all which have larger hole spacings.

Just trying to see if there is an interest thanks.

exe163

02-01-2009, 11:24 PM

If you can some how make it into bloodrage, I am in for one.

Planet

02-02-2009, 01:38 AM

What are you talking about make it into bloodrage?

biggles1

02-02-2009, 03:10 AM

What are you talking about make it into bloodrage?

Maybe Foxconn BloodRage (http://www.foxconnchannel.com/product/motherboards/detail_overview.aspx?id=en-us0000430)

biggles1

02-02-2009, 03:11 AM

Votes yes if it will work on the Gigabyte Extreme X58 in place of the supplied water block...

EnJoY

02-02-2009, 06:12 AM

What are you talking about make it into bloodrage?

I believe he's asking for a transformer that can go from an MCW30 to a Foxconn Bloodrage at the push of a button. :wth:

biggles1

02-02-2009, 06:33 AM

I believe he's asking for a transformer that can go from an MCW30 to a Foxconn Bloodrage at the push of a button. :wth:

Oh my God, why didn't I think of that. Of course he is!
:rofl:

Aldy402

02-02-2009, 06:36 AM

mcw30 worked fine on my x48 with hardmount.. just invert the plate..

SNiiPE_DoGG

02-02-2009, 06:46 AM

I think a larger universal system would be good, but the question your asking here cpt wont get you many answers, the people who need this have already gone to another block and the people who might want one don't know they will need one yet. ;)

that said put me down for 2 sets of large wings :D I will find a use for them in my new bench station :up:

Eddie3dfx

02-02-2009, 06:46 AM

I'd buy one for this, but not the mcw30.

http://www.swiftnets.com/assets/images/products/MCW-NBMAX/MCW-NBMAX.jpg

exe163

02-02-2009, 11:31 AM

I'd buy one for this, but not the mcw30.

[IMG]http://www.swiftnets.com/assets/images/products/MCW-NBMAX/MCW-NBMAX.jpg[IMG]

Yes the new swifty chipset block looks a lot hawter than the old one. Anyone know if BP 7/16 compression work on it?

NaeKuh

02-02-2009, 01:01 PM

i prefer DD's MCP Universal.

But im lost in this thread cpt.

The MCW30 is already universal. :shrug:

Planet

02-02-2009, 01:13 PM

i prefer DD's MCP Universal.

But im lost in this thread cpt.

The MCW30 is already universal. :shrug:

No alot of the newer boards have mounting holes larger than 60MM which is the max of the MCW30 with the stock bracket.

CedricFP

02-02-2009, 01:59 PM

I would certainly be. I want to hold on to my MCW30 when I move to X58. Would buy!

Chruschef

02-02-2009, 02:27 PM

i prefer DD's MCP Universal.

QFT. thats what i got :yepp:

SNiiPE_DoGG

02-02-2009, 02:42 PM

exe163

02-02-2009, 03:54 PM

Does DD MCP fits Bloodrage?

zenix

02-02-2009, 04:03 PM

Yes, would be nice.

SiGfever

02-02-2009, 04:11 PM

The MCW30 is a stellar performer and worth the price of additional mounting arms. I have the MCW-NBMAX on my MIIF and I am very impressed with this little block.

Planet

02-02-2009, 04:36 PM

Should have some idea on Pricing in a few days.

Chruschef

02-02-2009, 07:09 PM

DD MCP is overbuilt for a chipset block, the MCW reigns supreme for low restriction which is what you want. I wish dd would make competitive blocks other than FC GPU though :( I want to buy from a company with good service who is entirely US based :up:

i've never actually seen a comparison graph, if you could find one and post one i'd really appreciate that... but from the looks of the MPC it doesn't appear to be very restrictive?.. it didn't effect my temperatures, but then again i'm running a legendary iwaki pump. :rolleyes:

Planet

02-08-2009, 04:49 PM

Should have a sample or two in within a week or two.

SNiiPE_DoGG

02-08-2009, 06:27 PM

i've never actually seen a comparison graph, if you could find one and post one i'd really appreciate that... but from the looks of the MPC it doesn't appear to be very restrictive?.. it didn't effect my temperatures, but then again i'm running a legendary iwaki pump. :rolleyes:

martins flow estimator has both blocks IIRC

http://martin.skinneelabs.com/MartinsFlowRateEstimator.html

Duniek

02-08-2009, 06:30 PM

No alot of the newer boards have mounting holes larger than 60MM which is the max of the MCW30 with the stock bracket.

how larger?
66mm max?
I will try make some maybe

jetroho

02-08-2009, 09:53 PM

The XSPC v20 and v3 mount plates span up to 70mm . The Gigabyte P45 board I want to put my my -30 on is spaced at 66mm if I remember right . I would definately go for one .
As a thought , if you made a pair of mount plates that spanned 43 to 50mm . With the mounting slots lining up with the spring wire retaining groove in the top . That would make the block fit my Adaptec raid cards . I'd buy five sets of those plates yesterday if I could .
J

Duniek

02-09-2009, 08:22 AM

prototype
spacing 53-70,5mm
http://img141.imageshack.us/img141/4968/tnimg0554ac9.jpg

Planet

02-20-2009, 09:21 PM

I just got some samples in. Finish could be nicer but I think I can buff em out.

http://img19.imageshack.us/img19/684/img0552no4.jpg

http://img18.imageshack.us/img18/3320/img0561dp8.jpg

http://img17.imageshack.us/img17/4691/img0562xf5.jpg

Should be about 5-6 bucks + shipping. No mounting hardware included

Metric

02-20-2009, 09:47 PM

Very nice design and liking the price too :up:

anubis_is_evil

02-20-2009, 09:58 PM

HDCHOPPER

02-20-2009, 10:06 PM

nice ! sloting the block mounting holes would make it even more universal

Planet

02-20-2009, 10:23 PM

look very nice Cpt.Planet :)

somehow, it reminds me of ek supreme LT :D....but yes it does make MCW30 much nicer...i do planning to cool my NB/SB with mcw30, and now i become more anxious to get mcw30 so bad, especially with your mounting....

want to know, based on what motherboard that you created that mounting ? :up:

Used the EVGA X58 which quite a few people I know have.

nice ! sloting the block mounting holes would make it even more universal

Yes and no. I would be afraid somebody wouldnt install properly though.

Planet

02-21-2009, 12:13 AM

Here we go

Chipset Pronz
http://img17.imageshack.us/img17/3351/img0598yk6.jpg

Moar Pronz
http://img13.imageshack.us/img13/3738/img0609dw5.jpg

The Subject
http://img15.imageshack.us/img15/7818/img0608so0.jpg

Getting Installed
http://img11.imageshack.us/img11/6120/img0621ei2.jpg

Installed
http://img10.imageshack.us/img10/922/img0625kk6.jpg

2nd View
http://img9.imageshack.us/img9/3888/img0627ot9.jpg

CedricFP

02-21-2009, 12:44 AM

That looks really great :D

I'd definitely buy a kit for when I go X58.

bot@xs

02-23-2009, 05:39 PM

good stuff, better then the bend screws anyday. i would not like to switch to another cooler just because of that
when is it gonna come? i want a set

Duniek

02-23-2009, 06:24 PM

and for X38 (will be stainless too)
http://img14.imageshack.us/img14/8208/x38.jpg

@CPT.PLANET

holes spacing is 47x47mm ??

zenix

03-02-2009, 07:01 AM

looking good!

rioja

03-02-2009, 08:02 AM

i think that actually most intersted in waterblock with more contact area, becoz now with chips like x38 it cant cover full chip
low restrictive block mcw-300 with high contact area :up::up:

skinnee

03-02-2009, 08:03 AM

Nice work...those look great!!! :clap: :clap: :clap:

ILikeCosmosS

03-02-2009, 08:07 AM

they are great i would love to buy one of those if there was not option for nb/sb waterblocks

ballzD33P

03-02-2009, 08:16 AM

I'd buy one for this, but not the mcw30.

http://www.swiftnets.com/assets/images/products/MCW-NBMAX/MCW-NBMAX.jpg

+1

nice work on the other, but i'd really like to see a braket for this guy too