mongoled
10-27-2003, 03:46 AM
Hello peeps,
After alot of attempts with different techniques and failures I have made my own mod on how to up the 3.3volt rail on my enermax PSU.
I intitialy tried all present methods available but they didnt work. So i came up with this solution.
http://homepage.ntlworld.com/dresuk03/3.3_rail_mod.jpg
I can now adjust my mod to over 3.6volts with prime working away!!!
http://homepage.ntlworld.com/dresuk03/mbm_pots.jpg
:)
Here are my adjustable pots (3.3 and 5/12 volt rails)
http://homepage.ntlworld.com/dresuk03/PSU_V_adjust.jpg
Special thanxs goes out to E-blitz(amdforums) who has been ever present throughout the whole process, without his help this mod would not have been possible. Also thanxs goes out to the other peeps who were the first pioneers of a mod for potless PSU's their input has also been necessary for this accomplishment.
Time to go, any help needed just post here :)
mongoled
After alot of attempts with different techniques and failures I have made my own mod on how to up the 3.3volt rail on my enermax PSU.
I intitialy tried all present methods available but they didnt work. So i came up with this solution.
http://homepage.ntlworld.com/dresuk03/3.3_rail_mod.jpg
I can now adjust my mod to over 3.6volts with prime working away!!!
http://homepage.ntlworld.com/dresuk03/mbm_pots.jpg
:)
Here are my adjustable pots (3.3 and 5/12 volt rails)
http://homepage.ntlworld.com/dresuk03/PSU_V_adjust.jpg
Special thanxs goes out to E-blitz(amdforums) who has been ever present throughout the whole process, without his help this mod would not have been possible. Also thanxs goes out to the other peeps who were the first pioneers of a mod for potless PSU's their input has also been necessary for this accomplishment.
Time to go, any help needed just post here :)
mongoled