View Full Version : program, utility- K10stat
FlanK3r
01-16-2009, 05:56 AM
Hi all, who help me with this program? I downloaded it yeasterday, but i dont know, how use it and where this folder copy?readme is in japanese :(.
Worked it only on AMD chipsets or too on Nvidia chipset?Thanks all
Its simple: unpack into any folder anywhere.
start the program, use the second tab (p-states) to adjust voltages and clocks
hit accept, then ok.
start cpu-z and look whether it works. if it doesnt, check if energysaving-settings in windows are right for cnq...
if everything is ok, make a shortcut.
edit the shortcut to start the program with the switches "-loadpstate -nowindow"
put the shortcut into autostart
voila there you go :D
i waited LONG for such a program for K10. I could have used my 9750 with a higher overclock.. but whatever, better late then never.
whether it works on nV chipset: dunno.. try it out ;)
roofsniper
01-16-2009, 01:51 PM
wow thats a really nice program. so it has the effects of cool and quiet without even turning cool and quiet on? also i see for phenom I it only allows for 2 different power states. i know phenom I only has 2 power states but can you add more?
no cnq must be on.. but you can alter the p-states and even nb-multi/volts in windows and load them on bootup.
now i can undervolt/oc WITH CNQ ON!! like in those good old crystalcpuid days... AND BRING IDLE POWER DOWN! Only 142w left for my machine ;) and its even better then crystalcpuid/rmclock, because it just alters the p-states entrys in the msr and then quits. no additional running prog in the background...
but i think you cannot add additional p-states...
roofsniper
01-16-2009, 03:07 PM
i have cool and quiet off but i can still set power states and use them.
roofsniper
01-16-2009, 03:41 PM
oh even better ;)
they most likely won't change themselves on their own but with a click of a button i can change all of the clocks and voltage. i also see that it reads off my nb temps which i have not been able to see with any of my other programs.
FlanK3r
01-19-2009, 01:49 AM
Thanks, today il try it
BertM
01-19-2009, 02:58 AM
great find!! but not much info available on this program.
i saw in google that this is possible also:
K10STAT.exe -loadprofile:1 -nowindow
and these commands can be used:
-enabletlbcache
-disabletlbcache
not sure about these i saw:
-unlimit
-enable309
-disable309
dont know if 309 belongs to the command.
Hazzan
01-19-2009, 11:36 PM
HERE !! (http://rapidshare.com/files/186417443/K10STAT032.zip.html) :):)
BertM
01-20-2009, 02:31 AM
or here http://www.geocities.com/k10stat/ :p:
running my phenom now 400mhz idle.
but some documentation would be greatly appriciated because yesterday suddenly i was running 162mhz fsb. and i dont know how i did it. :D
edit: its everest giving wrong values when using k10stat.
and downclocking doesnt give much extra savings, perhaps imc or cache is still taking alot of power.
the 5000be took waaay less at 1.1ghz then the 940 at 4x100mhz.
FlanK3r
01-20-2009, 12:27 PM
Hm its ok, but OC up is only with open CPU multiplier:shrug:...
x3 8650 next OC up is unreal on this board
ryboto
01-21-2009, 06:25 AM
or here http://www.geocities.com/k10stat/ :p:
running my phenom now 400mhz idle.
but some documentation would be greatly appriciated because yesterday suddenly i was running 162mhz fsb. and i dont know how i did it. :D
edit: its everest giving wrong values when using k10stat.
and downclocking doesnt give much extra savings, perhaps imc or cache is still taking alot of power.
the 5000be took waaay less at 1.1ghz then the 940 at 4x100mhz.
Are you also adjusting the vcore? I always undervolt at any setting to check for the lowest possible vcore. It will improve power consumption more than underclocking alone.
BertM
01-21-2009, 06:34 AM
yes i did. below 0.75 volt it just crashes. my amd 5000 was at 0.8.
i have seen screens where they set 0.65 for phenoms with k10stat, so probably my board doesnt allow it or crashes at this setting.
Meizuman
01-28-2009, 04:30 PM
they most likely won't change themselves on their own but with a click of a button i can change all of the clocks and voltage. i also see that it reads off my nb temps which i have not been able to see with any of my other programs.
I checked that NB temp. At least on my board (MA790GP-DS4H) the "NB" value is exactly the same as core temp. The Temp2 (in case of Temp0 / 1 / 2) or Temp3 (in case of Temp1 / 2 /3) is the NB temperature.
roofsniper
01-28-2009, 04:34 PM
I checked that NB temp. At least on my board (MA790GP-DS4H) the "NB" value is exactly the same as core temp. The Temp2 (in case of Temp0 / 1 / 2) or Temp3 (in case of Temp1 / 2 /3) is the NB temperature.
hmmmm i just checked that now yea its the same. well that sucks i wish i could know my nb temp. also wish i could know the temps of my pwms but thats a stretch. :)
BertM
02-26-2009, 10:22 AM
http://www.geocities.com/k10stat/
new version of k10stat is out.
seems to have more functions towards cnq or has its own clock control.
roofsniper
02-26-2009, 03:57 PM
lots of changes but i can't get their own cnq thing to work. when my cpu is at 0% usage it doesn't change and it doesn't go up on load. i have had it randomly switch itself around a few times tho. would i need to have cnq on for this to work properly?
G0ldBr1ck
02-26-2009, 04:21 PM
lots of changes but i can't get their own cnq thing to work. when my cpu is at 0% usage it doesn't change and it doesn't go up on load. i have had it randomly switch itself around a few times tho. would i need to have cnq on for this to work properly?
must have C&Q enabled in Bios and in OS power settings
BertM
02-26-2009, 04:22 PM
yes i just got it to work.
you must turn of cnq in windows. with powerprofile is enough.
create a shortcut to k10stat with this in the commandline -clkctrl:1
now its on :)
but k10stat must remain running to make use of its autoclocking.
Lostfaith
03-08-2009, 10:28 AM
hmmm trying to load the second profile from K10stat I renamed "ocslight" on startup.
however I cannot get the switches to work..
I tried variations like:
-loadprofile:2 -nowindow
-loadprofile:ocslight -nowindow
-loadpstate -nowindow
-loadpstate:2 -nowindow
-loadpstate:ocslight -nowindow
checking in CPU-z but no result..
powersetings in vista as balanced... anyone any idea to get it to load a specific profile?
940BE - GB MA790GP-DS4H - 4x1gb OCZSR1066gk's
BertM
03-08-2009, 12:35 PM
did you enter it like on the picture and if you start the k10stat.exe, does it show all the profiles you applied?
i just tried with k10stat91 and renaming and starting a profile doesnt work.
i renamed profile 2 to test and -loadprofile:2 -nowindow did seem to start profile 2.
Lostfaith
03-08-2009, 10:21 PM
tnx, I took the easy way out and swapped the profile I wanted to 1. then it did load.
hopefully the creator of k10stat wll provide more documentation and versions :)
Sintel
03-25-2009, 04:49 PM
Anyone else having problems with k10stat not applying at boot? Tried it via a shortcut and via the registry, but the altered p-states do not get applied. When running the exact same shorcut/cmdline after boot, the p-states do register.. This is on WinXP SP3 btw. Does the amd driver need to be initialised or something?
BertM
03-25-2009, 05:11 PM
maybe try a bat file with a waiting time?
tictac
06-03-2009, 06:04 AM
I am using k10stat as well to tune my laptop Compaq CQ40-401ax
Currently using this setting
2.2GHz 1.01V
1.1Ghz 0.80V
550MHz 0.75V
Load temprature went down to 93C from 100C (stock setting) :up:
FlanK3r
03-18-2010, 12:39 PM
new version K10 stat 1.32 here (http://sites.google.com/site/k10stat/)
wuttz
03-18-2010, 12:47 PM
new version K10 stat 1.32 here (http://sites.google.com/site/k10stat/)
awesome! thanks flank3r! :up:
demonkevy666
03-18-2010, 05:54 PM
this should be sticky. please
Nintendork
03-18-2010, 07:01 PM
Anyone with a lower stable voltage for stock 620?
Anyone with a lower stable voltage for stock 620?
Using K10stat right now on my AthlonII 620, at "very low Profile" (browsing, email), I am using .8V@622Mhz for a very long time now...Cool 'n Quiet turned on and pwrprofile set to "balanced". Win7 Ult x64
Royalk
03-19-2010, 08:00 AM
Tried to set NB DID to 1 to lower NB frequency and voltage on version 1.32 but doesnt work... CPU VID would nolonger available to change and locked to default before next reboot. Does anyone have the same issue?
zir_blazer
03-20-2010, 11:42 AM
I should check that new version of K10stat, these screens are with the earlier one...
http://img694.imageshack.us/img694/6695/undervolt.th.jpg (http://img694.imageshack.us/i/undervolt.jpg/)
http://img693.imageshack.us/img693/7742/undervolt2.th.jpg (http://img693.imageshack.us/i/undervolt2.jpg/)
http://img696.imageshack.us/img696/5256/undervolt3.th.jpg (http://img696.imageshack.us/i/undervolt3.jpg/)
Right now I am running at 1 GHz @ 0.9V. I didn't tested for stability in any setting, just figured out when I can't get it lower any longer because the machine just freezes as soon as I apply a lower Voltage setting. I think than the Voltage could go an step lower at 100 MHz to just 0.600V, but at 0.5875 it freezes instantly. I didn't touch anything related to the Northbridge Frequency or Voltage, maybe I should mess with it because is a waste of resources get it running at 2 GHz when the Cores themselves just match a K6-II or so, same with the Memory Modules Frequency.
I recall than someone that I know than had an in depth knowledge of electronics said that transistors (Or some other component, or silice itself. I don't remember) could't work at Voltages lower than 0.6 or 0.8V because it was not enough current to open the transistor gate, or whatever it was. Does anyone knows about that? It means that I dd hit a physics limit?
I should also add than my AIIX4 620 got a CACYC Stepping (More precisely, CACYC AC 0937DPMW), so it means that it is a full Deneb. So far, I have been unable to even boot when using ACC and Unleashing Mode to see if I can get the Cache L3 to work.
I builded this computer yesterday (After a whole four years with an A64 3000+ Venice DH-E6 with an ASUS A8N-VM CSM), with this AIIX4 620, an ASUS M4A785TD-V EVO and a pair of 2 GB GSkill Ripjaws F3-10666CL8D-4GBRM.
http://img406.imageshack.us/img406/3936/zirj.th.jpg (http://img406.imageshack.us/i/zirj.jpg/)
Nintendork
03-20-2010, 02:44 PM
2600Mhz @1.1125v
1900Mhz @0.925
1400Mhz @0.875v
800Mhz @0.75v
2600Mhz @1.025v = System restart
2600Mhz @1.05v = OK (bump it for safety)
800Mhz @0.7v = System restart
zir_blazer
06-21-2010, 09:51 AM
*BUMP*
I have noticed that K10stat 1.41 for some reason removed the NB DID (It was either 0 or 1, it just halves the current IMC Frequency) that in 1.32 was available. The readme.txt changelog includes something that specifically talks about NB DID in the 1.40 version:
@@ NB DID•\Ž‚Rev.C3‚Rev.DA-C2‚‚‚ɐŒ
But as I don't understand what the hell that means (Besides the fact that it is related to NB DID, Rev. C3 Processors, and for some reason specifically talks about Rev. DA-C2), I don't know why it was removed. Anyone can translate that? Oh, and if someone knows who makes K10stat, please tell that guy that he should include english documentation for a more widespread understanding.
FlanK3r
06-21-2010, 09:57 AM
where s MAD?? he know maybe (he is from H-K)
HanaJetso
09-09-2010, 01:46 AM
1090T use K10STAT v1.41 shortcut add this :
-mp: 4 -nw -StayOnTray -lp:0 -ClkCtrl:1
K10STAT v1.41 http://sites.google.com/site/k10stat/
HanaJetso
09-09-2010, 04:32 AM
1090T use K10STAT v1.41 shortcut add this :
-mp: 4 -nw -StayOnTray -lp:0 -ClkCtrl:1
K10STAT v1.41 http://sites.google.com/site/k10stat/
why can't run 5 step on a K10STAT ?
so, change like this. :(
zir_blazer
08-15-2011, 12:32 AM
*BUMP*
http://sites.google.com/site/k10stat/
K10STAT154.zip Aug 6, 2011 5:09 AM
Would love to see that Changelog in english...
PatRaceTin
08-15-2011, 03:12 AM
wow i did not notice this update
chew*
08-15-2011, 01:32 PM
*BUMP*
http://sites.google.com/site/k10stat/
K10STAT154.zip Aug 6, 2011 5:09 AM
Would love to see that Changelog in english...
It would probably say support Llano since previous does not work and this does.
FlanK3r
08-15-2011, 01:44 PM
will be some simillary for FX? (without AOD soft?)
chew*
08-15-2011, 01:51 PM
will be some simillary for FX? (without AOD soft?)
Hmm thats a tough question flanker.
I guess it would depend on how it can adress the modules or cores.
I just checked out 1.54 on Llano, works no different than 1.53, no noticeable changes. It's probably a bug fix over 1.53.
zir_blazer
08-15-2011, 02:20 PM
It would probably say support Llano since previous does not work and this does.
Can you do anything interesed with Llano you weren't able to do before? Besides, do you have access to K10stat beta versions or something? There is a jump from v1.41 to 1.54 in a one year lapse, though the Changelog seems to show that there were many in-bewthem versions...
chew*
08-15-2011, 02:35 PM
Can you do anything interesed with Llano you weren't able to do before? Besides, do you have access to K10stat beta versions or something? There is a jump from v1.41 to 1.54 in a one year lapse, though the Changelog seems to show that there were many in-bewthem versions...
He just removes versions and keeps up the latest bug fix.
Older versions may however work better with older models.
smpsys
08-15-2011, 02:42 PM
Can this program adjust FSB on 890FX chipset?
Someone please confirm it working and the motherboard you used.
Thanks..
chew*
08-15-2011, 02:56 PM
Can this program adjust FSB on 890FX chipset?
Someone please confirm it working and the motherboard you used.
Thanks..
multi and voltage only not fsb.
zir_blazer
08-15-2011, 04:29 PM
He just removes versions and keeps up the latest bug fix.
I can guarantee you that I checked that link one or two months ago (I usually download the last version of my commonly used tools everytime I'm getting ready to tweak a fresh machine) and the last version was the 1.41 from one year ago. I still believe you get these versions elsewhere, otherwise is hard that I have missed a new K10stat version as I checked regularily that site. Except if he released several succesive versions in just two weeks or so...
chew*
08-15-2011, 04:52 PM
1.53 was available about 2 weeks ago. 1.54 supercedes it, it has to be maybe a few days old and no point of having 1.53 up for DL?
I have 1.53, I can send it but theres no magic over 1.54.
I know about a month ago nothing was available.
smpsys
08-16-2011, 07:28 AM
multi and voltage only not fsb.
Chew,
Do you know of any program that can change FSB on 890FX chipset?
.
Alex-Ro
08-16-2011, 07:30 AM
AMD overdrive :)?
Alex-Ro
08-16-2011, 07:32 AM
Flashed my board with F1A75-V PRO bios and k10stat worked flawlessly,that means modifying voltage too.Back to F1A75-M-PRO bios and it would not work anywore.Damn you ASUS.!! I would had kept the F1A75V-PRO UEFI,it was running good but only thing i couldn't modify BLCK and memory settings at all :)
smpsys
08-20-2011, 11:55 AM
AMD overdrive :)?
That does not work on Supermicro MB.
I believe ASUS/MSI/Gigabyte utility should let me change FSB but they don't instal on supermicro MB.
If some one know a way to fool the ASUS (or other) utility to work on Supermicro motherboard please PM me:)
My motherboard is based on AMD 890FX chipset:)
Thanks.