GIGABYTE Challenge Dual Channel DDR2-1508 Record-- WIN 1,500 US$ CASH !!!

[Benny Lodewijk]

GIGABYTE Challenge Dual Channel DDR2-1508 Record


Terms & Conditions

General
You acknowledge and agree that the participation in the GIGABYTE Beat the Pros Competition (hereinafter "Competition") is subject to the terms and conditions described herein. By submitting your entry to the Competition, you hereby express your consent and agree to be bound by these Rules. GIGABYTE Technology reserves the right to disqualify any entry if it has reasonable grounds to believe the participant has breached any of these Rules.

Competition is organized by GIGABYTE Technology and all Rules, jury and winner nomination remain at the sole discretion of GIGABYTE Technology. GIGABYTE Technology reserves the right not to award any Competition entry when appropriate. GIGABYTE Technology also reserves the right to change or amend the Rules, to postpone the Competition, to interrupt it or to cancel the Competition at any time without prior notice and without any compensation to any participant. Any changes will be posted on pages at www.gigabyte.com.tw.

By entering the Competition, you hereby warrant that all information submitted by you is true, current and complete. You hereby agree that the information submitted by you may be used for further marketing purposes of GIGABYTE Technology or any of it's partners, subject to GIGABYTE Technology privacy policy.

Your Motherboard, CPU and Memory must be readily available as boxed items at retail. Prototypes and special models never released for sale are not allowed in the interests of fairness and healthy competition.

more details : http://ddr2-1508.gigabyte.com.tw/

[K404]

Thanks for posting :D Im interested in this!

[Pt1t]

ahah , I m going to burn some D9GMH again :D

[Slovnaft]

time to harrass someone about where my D9GMH is...:rolleyes::D

[Pt1t]

time to harrass someone about where my D9GMH is...:rolleyes::D

All i know , they did +1500 easy 5-5-5-18 when P35 was launched :D

[[XC] gomeler]

Hrm. Just blew up a mosfet on my UD3P with my QX9650, guess it's time to find another one and try some DDR2 overclocking :D

[artkobe]

OMG!!
my good DDR2s Ram were sold...

[hey]

it seems easy but "GA-EP45-UD3P, GA-EP45-UD3R and GA-EP45-UD3 only" which are not available in Turkiye as i know :)

[redratamd]

I've my 807MHz CL5 and one UD3P . Let's go :)

[Marco André]

Where's jmax_oc? :D

[VOID WARRANTY]

gomeler;3419202']Hrm. Just blew up a mosfet on my UD3P with my QX9650, guess it's time to find another one and try some DDR2 overclocking :D

i keep hearing about things blowing on this board and cpus being killed...is this only on extreme runs for benching...people using to many auto settings?..bad luck..:shrug:...from what i read this thing oc,s great....also gigabyte giving away $1500 i want a see some one from extreme systems cash in on the prize for extreme sytems forum supremacy :cheer: come un guys get them d9,s out...and get the party started...

[SNiiPE_DoGG]

hmmm seems like many will shoot for first prize and kill a whole lot of d9 in the process.... good luck to all thoguh, hopefully we can see some crazzzy D9 clocks :D

[Vapor]

Ooo, the contest is up :D

To everyone planning on participating....bugged results won't count :p: I recommend sticking to the 1:2 ratio ;)

[redratamd]

Ooo, the contest is up :D

To everyone planning on participating....bugged results won't count :p: I recommend sticking to the 1:2 ratio ;)
It's same thing with 3:4 for me . I've a wall @ ??? MHz .
I'm with F4-4 ( Pi ) ,i test others bios .

[dinos22]

single or dual channel

[Planet]

Dinos doesnt know how to read :p:

[nut311]

Dinos doesnt know how to read :p:

hahahahha :wth::wth::wth::wth::wth::wth::wth::wth:

[K404]

1:2 means steps of 2MHz at a time, though its the ratio I was thinking of using anyway...thought about it on the way into work today :D

Like it matters...pt1t....jmax...gomeler and hey.....are there T-shirts or something for the runners up? :p:

[OnDaS]

I'm IN!

[redratamd]

single or dual channel
Dual for the moment. Single just for the fun ;)

[philbrown23]

damn no giga board for me just yet :(

[redratamd]

Ok it's easy for me to break 754MHz on dual .
757MHz 5-5-5-15 full air (http://valid.x86-secret.com/show_oc.php?id=444788) :shrug:
But it's not finish ,more tweaks in the bios are very good .

[[XC] gomeler]

Ok it's easy for me to break 754MHz on dual .
757MHz 5-5-5-15 full air (http://valid.x86-secret.com/show_oc.php?id=444788) :shrug:
But it's not finish ,more tweaks in the bios are very good .

Nice! :up:

[Revv23]

Ok it's easy for me to break 754MHz on dual .
757MHz 5-5-5-15 full air (http://valid.x86-secret.com/show_oc.php?id=444788) :shrug:
But it's not finish ,more tweaks in the bios are very good .

and im already out of the competition lol


good luck man!


another great marketing move on gigabyte... this should sell them lots of boards and be a fun contest.:cool:

[K404]

LOL very nice initial aiming point redrat....maybe this compo will see 800MHz??

[redratamd]

Which ratios FSB/RAM are available ?
3:5 is wrong ?
You can notify that in the rules ?

[dinos22]

i am officially blind lol

[massman]

Ok it's easy for me to break 754MHz on dual .
757MHz 5-5-5-15 full air (http://valid.x86-secret.com/show_oc.php?id=444788) :shrug:
But it's not finish ,more tweaks in the bios are very good .

Haha, you're absolutey awesome :D:D

You make this contest look so easy to win :up:

[redratamd]

Haha, you're absolutey awesome :D:D

You make this contest look so easy to win :up:
Thank's , but it's not the end .

[LinusTech]

I've got some old D9GMH... I'm not very experienced overclocking RAM though. Maybe I'll give it a shot for kicks.

[hey]

1:2 means steps of 2MHz at a time, though its the ratio I was thinking of using anyway...thought about it on the way into work today :D

Like it matters...pt1t....jmax...gomeler and hey.....are there T-shirts or something for the runners up? :p:

eheh :) i wish i had u series mabo, so i try to fix my memories and give a real shot :p:

http://img77.imageshack.us/img77/9656/750256koj6.jpg

[d.j.s.]

1:2 means steps of 2MHz at a time, though its the ratio I was thinking of using anyway...thought about it on the way into work today :D

Like it matters...pt1t....jmax...gomeler and hey.....are there T-shirts or something for the runners up? :p:

Thats a joke right . ?
1:2 ratio means memory is 2 times the speed of the fsb
if your fsb is 333 then ram is 666 1:2

I just dont want somebody to get confused.

[LordEC911]

Thats a joke right . ?
1:2 ratio means memory is 2 times the speed of the fsb
if your fsb is 333 then ram is 666 1:2

I just dont want somebody to get confused.

Correct, so since you can change the FSB at 1mhz intervals, 333FSb-334FSB, you impact memory mhz in 2mhz intervals.

[Revv23]

Correct, so since you can change the FSB at 1mhz intervals, 333FSb-334FSB, you impact memory mhz in 2mhz intervals.

Lol. :)

[sno.lcn]

Hope my new RAM comes soon so I can throw my good stuff back in the UD3P and have some fun :)

[Sparky]

Heh.... I don't think I'll be able to practically double the speed of my memory, 900MHz it is fine at but I don't think it can even do 1000MHz stable :p:

[G H Z]

Not the best ram, this board doesn't like my good 9136 Dominators.

http://valid.x86-secret.com/show_oc.php?id=446143

[[XC] gomeler]

Not the best ram, this board doesn't like my good 9136 Dominators.

http://valid.x86-secret.com/show_oc.php?id=446143

loosen those timings! 5-6-6-18 ;)

[Vivi]

Red and GHZ what voltages u guys running at?

[redratamd]

Hum ,i can't say ,it's scary :D on air :up:

[G H Z]

gomeler;3428668']loosen those timings! 5-6-6-18 ;)

Already been there ;)


GHZ what voltages u running at?

2.64V, this ram won't take anymore.

[Gautam]

Real pros bench DDR3 :p:

No, real pros bench DDR2 at CAS 6. Right, Charles? :p:

[Nanok]

So what chip would take first price ?
And what brand ?
Any suggestion ?

[G H Z]

You got the ram pots, freeze some up :up:

[Vivi]

Agreed :) nanok take em down to -196

[Nanok]

You got the ram pots, freeze some up :up:


Agreed :) nanok take em down to -196

I have three sets of Gkx and two gmh, what i lack is a memory freindly motherboard for ddr2.
My Commando dont like over 600 on memory, no matter cas and volt.
But verry sure i will buy one of the three boards thats allowed in the competition.
What chip is superior to high cas, and Hz, gmh or gkx, time will tell.
My guess for a winner brand would be Team or crucial.

[redratamd]

:up:

[Vivi]

My guess for a winner brand would be Team or crucial.

Team is good for low cas, not that much MHZ. you will be surprized, the winner wont be any of those brands :up:

[ekky]

Hi Vivi2, nice to see u again bro.... i think Team PC8500C4 is good for both for low cas and high fsb... :)

[Elektrosadist]

i just got 2 new kits of D9GMH and one new kit of D9GKX. I'm willing to enter but i'm a little unsure since i never did something like this.

i know what 1:2 ratios means but why only 1:2?

does the cas level makes a difference? Must it be 5-5-5-18 or can we use whateva achieves stability or is at least fit for validation.

I only have to validate via CPUZ? So i don't need to run a benchmark like super pi to show of a glimce of stability?

Sorry i'm german and really old.


And yeah is there a thread from fugger of vapor about there record where i can read a little how they achieved it, cause i can't find it even though i googled.

[Vivi]

No problem sir :D
Its Dual channel DDR2. i think the 1:2 ratio is one of the believalbe ratios to use. some ratios reads "750mhz" in cpu-z but your actually mmemory speed is only like 600. thats an example. Just a validation. and a screenshot of the validation accepted.

Here u can read more
http://ddr2-1508.gigabyte.com.tw/

Goodluck :)

[d.j.s.]

Well it would be very hard to get any other ratio than 1:2 upto 1500 + speeds since your average stock chip used for this type activity is already 333. so at a 375 bus with ram @ 1500 its 1:2 since you can only run 2.00d in 400 strap on p45 this is the only logical answer.

[redratamd]

1:2 it's not available on strap 400 . I use F5 , i haven't test others bios ( just F4 Pi is the same thing for ocing your memory )
I've tested some ratio . There's just the 3:5 divider on strap 400 with a bug . The others are alright . I check with cpu-z 1.45 .
My best score is done with 1:2 strap 333 . But one of ballistix is dead ( :D too much voltage ) . 800MHz seem possible with 1:2 strap 333 and 5-5-5-15 LP 9 . ;) It's not so far just some MHz and a new kit now :( One month and few days for try .

[Elektrosadist]

yeah i notice it's hard to hit a high frequency on the ud3p. I couldn't go past 700MHz into windows. But then again i got the microns now for 4 days and i'm not sure how much voltage them biatches need. And my Mobo reacts stupid when i set a high nb voltage cuz then he doesn't want to boot.

I read that at the gigabyte site but i wasn't sure if a vali screen was enough or if you also must test stability somehow but thx anyways.

Also how do D9GMH and D9GKX react to a superb cooling? I'm thinking of creating another water circuit and let icewater run through the rams coolers while going for the score.

[d.j.s.]

Im using a diff series with a diff bios but p45 and before f9 I couldnt get squat, now I have all my ram and ratios all avail
and so far , this is the best ram OCing board I have ever used in my life , its got those cheap dhx c5 corsairs running
1150 1:1 on 2.00d 400

I suspect we will see a ton of people pulling 400 fsb 1600 ddr2 under ln2 or DiCe then the 1:2 would kick in on the 2.00d
but yeah this is the arena for pushing ddr2 waaaay hard. P45 FTW.

[Elektrosadist]

how you cool rams with ln2 or dice? so little space. i was hoping there was no such thing cuz then i maybe have had a shot. lol i should've known better.

[redratamd]

Everything on air for the moment . One of mine had 807MHz on P35 . I handpick now .
I run windows @ 750MHz 5-5-5-15 .

[Elektrosadist]

D9GMH or D9GKX?

and do you use one of the GB boards for the competiton atm or another?

[redratamd]

D9GMH . 757 5-5-5-15 first hour (http://valid.x86-secret.com/show_oc.php?id=444788) . An UD3P .

[d.j.s.]

really nice work red
Thats some serious skills there bro cheers m8

[Elektrosadist]

damn thats nice man. i only had powerchips before how much voltage do you need on the dimm? and do you adjust the dram ref values as well to approximitly the half of your vdimm?
I'm not so sure about how much i need to push the micron chips.

[systemviper]

D9GMH . 757 5-5-5-15 first hour (http://valid.x86-secret.com/show_oc.php?id=444788) . An UD3P .


Damn that is sweet, I am moving so i had t put my system in the box till i get in on Dec 1 but i have a set of Dominators 10000 @ almost 700 and i am itching to really push them.....

I keep getting he bug to break it out, but toooooo much to do....
and seeing that 757 so early is a little frustrating :up:

[Benny Lodewijk]

Don't post that plz (http://valid.x86-secret.com/show_oc.php?id=444927)

Wow... 800++ but 3:5 :D

This is mine (http://valid.x86-secret.com/show_oc.php?id=448048) :(

[Charles Wirth]

Known bugged P45 ratios.

Yes, the UD3 blows away other boards in capability.

[ME4ME]

Benny, how much volt did u use? :p:

[Benny Lodewijk]

Benny, how much volt did u use? :p:

2.8 volt :D.. still all air and stock

[systemviper]

Cryptik explained to me that if i use the strap i used above that i'm not really runnin DDR 1400 rather DDR2 1240. Well anyways new Cellshock D9GKX just came in hope they can do better.



I don't understand, if we use 3:5 then it's reading wrong? :shrug:

[CryptiK]

Cryptik explained to me that if i use the strap i used above that i'm not really runnin DDR 1400 rather DDR2 1240. Well anyways new Cellshock D9GKX just came in hope they can do better.

Yes, but I said it was DDR2 1263, not 1401, the 3:5 divider is bugged on P45 chipset.

Very nice clocks so far guys.

[redratamd]

Yes it's wrong . With Cpu-z 1.45 you can read the real frequency .
I give to you one of my work .
Not the best actually ,of course i use 1:2 :D
http://img379.imageshack.us/my.php?image=769dual12cn1.png

[JAWS]

We have 2 cold nights in Florida; this was last night on the porch 2am::D

q6600 680.1 MHz (1:2) @ 5-9-9-31 (http://valid.x86-secret.com/show_oc.php?id=448228)

maybe maxed out my 5300 :) I'll try for more tonight!

[redratamd]

I try soon with Pc 5300 Crucial ( if my memory is alright ) they run windows @720MHz .

[sno.lcn]

Ugh this needs lots of work. Still trying to find the time in between class and work to play with this :(

666 6-6-6-18 (5-5-5 just as easy)
http://valid.x86-secret.com/show_oc.php?id=447916



*Edit: Still not much better

680 5-6-6
http://valid.x86-secret.com/show_oc.php?id=448373

[Vivi]

Hey i dont understand is 3:5 usable now? cause theres a 775mhz result on the site with divider 3:5 submitted :O

[boostedevo]

When I talked to them, they said they were aware of the 3:5 problem and anyone submitting using it will be asked to resubmit on a different ratio. They probably can't verify anything at the time of submission, so it might be up for now, but I imagine it will be DQ'd when they get around to it. It's not nearly fast enough to win anyway :p:

[redratamd]

Why there's dual channel on only one slot for the first result ?

[dinos22]

This is mine (http://valid.x86-secret.com/show_oc.php?id=448048) :(

is this the fastest so far :up:

i'm confused though
how come it says dual channel with only one stick :confused:

[boostedevo]

Why there's dual channel on only one slot for the first result ?


is this the fastest so far :up:

i'm confused though
how come it says dual channel with only one stick :confused:I think that happens when it's not so stable. I have had some that don't even read the slots at all (like the one below), but it was definitely dual channel.

Sorry Benny, this is a whole 1.6MHz faster :D

http://i10.photobucket.com/albums/a125/boostedevo/ep45-ud3p/ddr2-1540.png

[dinos22]

I think that happens when it's not so stable. I have had some that don't even read the slots at all (like the one below), but it was definitely dual channel.

i dont think these entries should be accepted as they are not really true dual channel runs :confused:

[boostedevo]

Why aren't they true dual channel runs? By your thinking, that one I post must've been run with no sticks then? :)

The slot info is just DIMM info which the validation isn't reading due to instability, doesn't mean the sticks aren't there. IMHO, the important part is the RAM section where it says DDR2 Dual Channel (or Single Channel). Regardless of what the slot info says (or doesn't say), I don't think there's any way to fake the number of channels since it's set at boot :shrug:

[dinos22]

sort of like a crippled dual channel :p:
but i guess this comp is for a screenshot/validation type purpose

all these number and stuff make me want to try it out lol

if i get a chance i'll play with the dominators but i dont think they can even hit 700 lol...my sticks are more CAS4 benching based than CAS5

[sno.lcn]

Mine's doing the same thing. When it does, I'm barely able to get the validation, then the crash.

[boostedevo]

sort of like a crippled dual channel :p:
but i guess this comp is for a screenshot/validation type purpose

all these number and stuff make me want to try it out lol

if i get a chance i'll play with the dominators but i dont think they can even hit 700 lol...my sticks are more CAS4 benching based than CAS5Don't get me wrong, I don't like that it doesn't show either, but I don't think it's detrimental in this case ;)

Light those sticks up :) I'll bet they do 700 in this board...does crazy stuff with mem. I dropped my 6400C3s in and they booted to the desktop 600 4-4-4-8 with 2.4V. I also had 4 sticks running 666MHz 5-5-5 at just 2.2V too, which really impressed me.


Mine's doing the same thing. When it does, I'm barely able to get the validation, then the crash.Same here, kind of. I can get a validation file higher, but when I try to submit, it's corrupted and I get the "please update CPU-Z..." I have to just keeping validating every couple FSB until it locks/reboots and then try to submit and see what worked :D

[Gautam]

sort of like a crippled dual channel :p:
but i guess this comp is for a screenshot/validation type purpose

all these number and stuff make me want to try it out lol

if i get a chance i'll play with the dominators but i dont think they can even hit 700 lol...my sticks are more CAS4 benching based than CAS5
It doesn't have anything to do with whether it's dual channel or single channel. It's dual channel, it's just so unstable that CPU-Z can't read the SPD info off of the RAM. It captures the speed and the fact that it's dual channel from the northbridge just fine.

[Elektrosadist]

urgh i can't get pass 690 atm. I think i will start trying now with DKX chips. I hope they get a little higher. I already nuked one Mushkin dimm so far.

[Pt1t]

first boot !

http://img142.imageshack.us/img142/315/testuu1.jpg

[K404]

urgh. I know the compo is about raw MHz, but 5-15-15 is just NASTY

lol nice start on the MHz though!!



discussion point: "Persons employed by or in a similar relation to GIGABYTE Technology, their subsidiaries or to companies participating on the preparation and organization of the whole Competition as well as members of their families, are nonetheless excluded from participation."


Does this affect the guys sponsored by/representing at National level/ doing review work etc for Giga?

[stangracin2]

urgh. I know the compo is about raw MHz, but 5-15-15 is just NASTY

lol nice start on the MHz though!!


we need to keep that shot lol

[Pt1t]

After some test :)

http://www.pt1t.eu/public/EP45-UD3P/784.PNG

[systemviper]

WOW, so i guess we will see 800 soon, Nice test!

[Vivi]

Hi guys!
Sorry to spoil the fun :D!
But i think i broke the WR Dual channel!

-100 LN2
Dual channel
OCZ FLEX 1150'S
3.04V (max)
Still running fine!

http://valid.x86-secret.com/show_oc.php?id=449952

[Pt1t]

Nice one , I will try also under ln2 :p

[hey]

hey guys, how high that u series push memory more than other giga p45s. i have ep45-extreme so i wanna test my memories and check if they are capable i will buy u series mabo.

[Vivi]

Mine did 741 air 2.65 PT1T so i think you will beat me ><. nooooooooooo

[Pt1t]

Mine did 741 air 2.65 PT1T so i think you will beat me ><. nooooooooooo

784 is 2.7v air. NB also

[hey]

784 is 2.7v air. NB also

hell thomas :D

[Vivi]

:banana::banana::banana::banana:e. that is sick thomas :D, im guessin you will get 835-850 :D

[marmott]

Hi guys!
Sorry to spoil the fun :D!
But i think i broke the WR Dual channel!

-100 LN2
Dual channel
OCZ FLEX 1150'S
3.04V (max)
Still running fine!

http://valid.x86-secret.com/show_oc.php?id=449952

crazy !! :eek:

congrats

[G H Z]

Sorry to spoil the fun :D!

Throwing down the gauntlet I see, 1-2mhz backups would have been funner ;)

Damn nice result :clap:

[Benny Lodewijk]

Sick sick sick result !!!!

[dinos22]

Hi guys!
Sorry to spoil the fun :D!
But i think i broke the WR Dual channel!

-100 LN2
Dual channel
OCZ FLEX 1150'S
3.04V (max)
Still running fine!

http://valid.x86-secret.com/show_oc.php?id=449952

niiiiiiiiiiiiiiice

i cant even do that with 3:5 ratio :ROTF:

[ekky]

Hi guys!
Sorry to spoil the fun !
But i think i broke the WR Dual channel!

-100 LN2
Dual channel
OCZ FLEX 1150'S
3.04V (max)
Still running fine!

http://valid.x86-secret.com/show_oc.php?id=449952

OMG.... u'r Sick bro...:eek: crazy result :clap::clap::up:
It's gonna hard to beat....

[Nanok]

Nice ViVi2, do you have pic. of your setup ?

[[XC] Oj101]

He does, it's insanely ghetto :D

[Vivi]

The pic is here :P
http://www.xtremesystems.org/forums/showthread.php?t=208542

[Vivi]

Ok super sigh...
Qualifications
"
If you are minor under the age of 18, you must first obtain the consent of your parent or legal guardian before entering the Competition. GIGABYTE Technology assumes that by entering the Competition (and you warrant that) either you have legal capacity to enter the Competition and agree to the Rules (i.e. that you are of sufficient age and mental capacity and are entitled to be legally bound in contract) or your parents or legal guardian have consented to your entry of the Competition and you to be bound by these Rules.

Persons employed by or in a similar relation to GIGABYTE Technology, their subsidiaries or to companies participating on the preparation and organization of the whole Competition as well as members of their families, are nonetheless excluded from participation."

They basically say, persons under 18 arent honest enough cause they are young. and i understand that (im 17) but there is no where where u can send your perants concent.. great :(
im gonna struggle getting that one up..

[Vivi]

Oh i see now, i just have to ask my parents "can i enter" and then enter as 18 years old? right?

Ok il do that

[redratamd]

Another test with Crucial Ballistix PC5300 16FD4 ( D9GMH ) on air delta 150CFM X 2 :D @2.82V
786MHz 6-7-7-24 (http://valid.x86-secret.com/show_oc.php?id=451035)

[youngpro]

hmmm

http://i200.photobucket.com/albums/aa50/preeeezy/IMG_0045-1.jpg

[Vivi]

O_O
im telling kingpin!

[Pt1t]

After some test :)

http://www.pt1t.eu/public/EP45-UD3P/784.PNG

Ram container ordered :p

[Benny Lodewijk]

Ram container ordered :p

No need ram container :ROTF: look at this http://www.xtremesystems.org/forums/showthread.php?p=3457707#post3457707

[Vivi]

yea who needs a ram container :D!!
GO PT1T!

[Pt1t]

No need ram container :ROTF: look at this http://www.xtremesystems.org/forums/showthread.php?p=3457707#post3457707

I tried with just aluminium paper ^^ and after 1min board was totally frozen :D

Trouffman sent me his ram container ... why not use them !

Crucial heatspreader are not good for direct ln2 on it :p

[redratamd]

On air first boot @2.8V (http://valid.canardpc.com/show_oc.php?id=457606)

[kylepaddock]

where do you get ln2?

[redratamd]

It's too expansive in France it's around 7€ per liter :down:

[K404]

Ah ****

Guys...dont forget the screenshot as well as the CPU-Z validation!

Lesson learned.....

[kylepaddock]

It's too expansive in France it's around 7€ per liter :down:

what about in USA

[[XC] gomeler]

what about in USA

85 cents per liter if you buy in bulk :up: :D

[kylepaddock]

what website. that is cheep?

[systemviper]

what store or place can i get me some on the east coast?

thanks

[redratamd]

Picture of rig and screen (http://pc-overware.be/redratamd/Temp/P1010314.JPG)
Max for the moment on air (http://img247.imageshack.us/img247/2133/807dualnm0.png)

Soon ,under single stage or DI or LN2 .

[[XC] Oj101]

Holy :banana::banana::banana::banana: that is MAD!!!

DDR1800 dual channel coming on LN2? :banana:

I found the explanation, you're in France :D

[redratamd]

Not sure for 900MHz .
But it's true ,frenchs guys like ocing memory . Since DDR1 and famous BH5 on NF4 .
I try to do better .

[[XC] Oj101]

VDIMM = 5v rail and LN2 @ -196'c for 1000MHz please :rofl:

[redratamd]

I remember NF7-S and vmod 3.3V :D

[K404]

Im having some trouble with submitting my initial result... I have:

http://valid.canardpc.com/show_oc.php?id=458327

But I cant remember how to get the valid x-86secret url...

its been a while, I dont normally "do" CPU-Z submissions...

please can I have a mental nudge? :D

Hold up...Canard now owns X86-secret? Gigabyte want the submission in terms of an x86-secret url...

[redratamd]

Rofl :D

[[XC] Oj101]

I remember NF7-S and vmod 3.3V :D

It works on basically any board, it's the most generic vmod ever :p:


Im having some trouble with submitting my initial result... I have:

http://valid.canardpc.com/show_oc.php?id=458327

But I cant remember how to get the valid x-86secret url...

its been a while, I dont normally "do" CPU-Z submissions...

please can I have a mental nudge? :D

Hold up...Canard now owns X86-secret? Gigabyte want the submission in terms of an x86-secret url...

http://valid.x86-secret.com/show_oc.php?id=458327 I just replaced canardpc with x86-secret and it worked ;)

[K404]

Thanks OJ :D

[redratamd]

Other ocing with an icy air spray around - 40°C .
821MHz 6-7-7-24@2.84V (http://img407.imageshack.us/my.php?image=821dualdm8.png)

[Ming@s]

Other ocing with an icy air spray around - 40°C .
821MHz 6-7-7-24@2.84V (http://img407.imageshack.us/my.php?image=821dualdm8.png)

air spray around - 40°C??????

:confused:
Photo Please.

Great Results,

[redratamd]

Yes This is that (http://www.conrad.fr/givrant_kf_p_19500_19514_206919) excuse me ,it's on french .
Mine is KF - 1371 (http://fr.farnell.com/kf/1371/givrant/dp/3916637)
Picture (http://img249.imageshack.us/img249/8651/p1010317db9.jpg)

[Ming@s]

Yes This is that (http://www.conrad.fr/givrant_kf_p_19500_19514_206919) excuse me ,it's on french .
Mine is KF - 1371 (http://fr.farnell.com/kf/1371/givrant/dp/3916637)
Picture (http://img249.imageshack.us/img249/8651/p1010317db9.jpg)


Thanks, did not know that's kind of spray

But if the Farnell has also should have the RS. I see it.

[[XC] Oj101]

Thanks OJ :D

It just hit me that if the redirect didn't work... Every validation ever posted would be a dead link :\


Other ocing with an icy air spray around - 40°C .
821MHz 6-7-7-24@2.84V (http://img407.imageshack.us/my.php?image=821dualdm8.png)

I hate you :)

[redratamd]

I hate you :)

Excuse me :p:
But it's not the end .

[[XC] Oj101]

Not being French automatically puts me at a disadvantage :D

[K404]

LOL Bennys results are filling up the results table.... 3/10 are his :p:

Giga....get yer act together! :D

[redratamd]

Hum ,i like this contest :D

[Westyle]

Hello everybody :)

after 2 hours of tests @ 2.7v on air (i'm sorry but i think that it's one year since I don't have touch a gigabyte motherboard :D)

http://img513.imageshack.us/img513/9886/validram2el5.jpg

the next episode if I have the time :D :

http://img261.imageshack.us/img261/8513/dsc03082iu8.jpg

[Hazzan]

OCZ FLEX 9200....808 6-9-9-30 :D:D

http://img116.imageshack.us/img116/3582/37607124fv4.jpg

[Vivi]

I see what you did here Ming :)
http://ddr2-1508.gigabyte.com.tw

il be coming back strong :)

http://img247.imageshack.us/img247/233/24479890lz3.jpg

http://img208.imageshack.us/img208/5461/63510710zh2.jpg

watch out guys this competition is about to get HOT

[redratamd]

Yes ,we need more voltage for our pretty memory :up:
@vivi2 :The second link is broken .

[Vivi]

i only have one link :O. the image.

Updated my score, im 1st again :P, phew.. so relieved

[dinos22]

Other ocing with an icy air spray around - 40°C .
821MHz 6-7-7-24@2.84V (http://img407.imageshack.us/my.php?image=821dualdm8.png)

i was always wondering if i should buy one of those hehe
'
how long does it last

[dinos22]

this is odd
i just looked the site and second fastest run is in 1st place
WTF
lol

http://img68.imageshack.us/img68/9308/clipboard01ul5.png

[Vivi]

I only updated my score, so it needs to be updated on their side. and dinos thats my ooooold score :p, new one is already up, hopefully wu stays away this time!

thanks for observing

[K404]

I think the leaderboard is being done by hand?

Benny has 3 scores in there....he's keeping me out of the top 10 :p:

[Benny Lodewijk]

I think the leaderboard is being done by hand?

Benny has 3 scores in there....he's keeping me out of the top 10 :p:

:confused: i did told them to remove my 2 records.....

[K404]

Its cool, I kow it aint your fault. A similar thing happened in the CustomPC magazine leaderboard. The submission system was reliant on someone manually taking out extra results from the same person, just depends on when someone can find the time....

[hey]

it is very nice to see you guys push more and more, m very sorry that i dont have time to attend :( btw, @Roodt Goddy, you should check your system, as i remember cpu must be retail according to rules ;)

keep pushing guys!

[Hazzan]

my new result with TEAM XTREME MEMORY........840 6-9-9-30 :):)

http://img114.imageshack.us/img114/9959/420xt0.jpg

[Benny Lodewijk]

nice Hazzan !!! Now you are in the top !!! :toast:

[Vivi]

i have 3 cpu's here, did not realise i used the es,

competition ends 15th February now, so i will have time to change me result.

[miahallen]

my new result with TEAM XTREME MEMORY........840 6-9-9-30 :):)

http://img114.imageshack.us/img114/9959/420xt0.jpg

Nice work Hazzan...amazing speeds on those DIMMS! :eek:

[[XC] Oj101]

Very well done :up:

What was the vdimm?

[redratamd]

Nice frequency here :D

[FoX360]

At the moment by AiR @ Delta ^^

Validation by FoX (http://valid.canardpc.com/show_oc.php?id=466623)

I need a Vdimm Mod! >_<

[Hazzan]

Nice work Hazzan...amazing speeds on those DIMMS! :eek:

Thanks :)


Very well done :up:

What was the vdimm?

Thanks VDIM 3.1 Volt :)


At the moment by AiR @ Delta ^^

Validation by FoX (http://valid.canardpc.com/show_oc.php?id=466623)

I need a Vdimm Mod! >_<

Here VDIM MOD :

http://img229.imageshack.us/img229/4651/vdimmod2hg8.jpg

And Here Measurment Point :

http://img508.imageshack.us/img508/8742/vdimmod1az4.jpg


nice Hazzan !!! Now you are in the top !!! :toast:

Thanks Boss I think its just been for while :)

[[XC] Oj101]

Only 3.1v? :shocked: That's some awesome RAM you've got! :up:

[redratamd]

How much is the VR ?

[Vivi]

it is a 20k, but turned down to about 4k for + .2 v or something like that

[redratamd]

Thank's Vivi ;)

[Vivi]

now get out there and beat me :)

[FoX360]

Thanks Hazzan and Vivi for the Vmod ;)

Today i'm inspired and I make an adaptor for my Team Xtreem Ram :)

http://img114.imageshack.us/img114/1669/cimg4000pw8.jpg

http://img366.imageshack.us/img366/6206/cimg4004nj5.jpg

http://img244.imageshack.us/img244/7764/cimg4011ck9.jpg

http://img244.imageshack.us/img244/4940/cimg4012go8.jpg

http://img155.imageshack.us/img155/7787/cimg4020ax2.jpg

http://img340.imageshack.us/img340/8040/cimg4022dz8.jpg

:up:

[K404]

Those pics are really really cool :D

The TX heatspreader suits frost soooo well

[Highgertz]

I'm coming to you :)

G.SKILL 9600 2Х2 1545MHz 5-5-5-15 2.6v

http://s57.radikal.ru/i157/0812/9a/780207b21e39t.jpg (http://radikal.ru/F/s57.radikal.ru/i157/0812/9a/780207b21e39.jpg.html)

[The Water Dog]

i want to compete, but P45 Extreme is not in the UD3 series:(

[Aerou]

I'm coming to you :)

G.SKILL 9600 2Х2 1545MHz 5-5-5-15 2.6v

http://s57.radikal.ru/i157/0812/9a/780207b21e39t.jpg (http://radikal.ru/F/s57.radikal.ru/i157/0812/9a/780207b21e39.jpg.html)

that's mighty impressive for 2GB sticks

[neo mike]

should be nice results there $300 sticks, good work there.

[Marco André]

Nice adaptor FoX360 :up:

[FoX360]

Nice adaptor FoX360 :up:

Thanks ^^ I have a other surprise for my adaptor :D in the next weeks more!

[Highgertz]

FoX360

Simple and original :clap: Share SPD please.

[Shahryar_NEO]

WoW Big Bug !!! :

see these records :

http://ddr2-1508.gigabyte.com.tw/showImg.asp?img=file/AWG200812230051143075658.jpg

and

http://ddr2-1508.gigabyte.com.tw/showImg.asp?img=file/EKE2009010604020914530530.jpg

gigabyte website has problem with 3:5 divider !!! :confused::confused::confused:

the first link is WR : 1700 Mhz ! And second is 1601.6 but both of them show wrong in gigabyte website ! :shrug:

[Mahdi_Moosavi]

WoW Big Bug !!! :

see these records :

http://ddr2-1508.gigabyte.com.tw/showImg.asp?img=file/AWG200812230051143075658.jpg

and

http://ddr2-1508.gigabyte.com.tw/showImg.asp?img=file/EKE2009010604020914530530.jpg

gigabyte website has problem with 3:5 divider !!! :confused::confused::confused:

the first link is WR : 1700 Mhz ! And second is 1601.6 but both of them show wrong in gigabyte website ! :shrug:



really why ?! http://www.pic4ever.com/images/127fs4573872.gif

[CryptiK]

Due to the nature of the P35 & P45 chipset, the 3:5 divider is bugged, and is really the 2:3 divider, so anything submitted with the 3:5 divider is wrong and won't be accepted.

[Shahryar_NEO]

Due to the nature of the P35 & P45 chipset, the 3:5 divider is bugged, and is really the 2:3 divider, so anything submitted with the 3:5 divider is wrong and won't be accepted.

no problem ! i'll test again :yepp:

[Shahryar_NEO]

is there any unsubmitted result mates ? :D do you want to WR be 1680 Mhz Only?!

[redratamd]

:D Wait ,wait .

[hey]

haha it seems everybody is backing up! :D

[FoX360]

http://img102.imageshack.us/img102/5683/cimg4215vr4.jpg

http://img166.imageshack.us/img166/395/cimg4218lb7.jpg

First bench with air, the next with sub0 around -110 in the evaporator :shoot:

[Vivi]

post results!

[Shahryar_NEO]

i'm w8ing for 1700 mhz record to put my record but i think there isn't yet ! :D

do you think that during this challenge 1800 Mhz will be reach ?! :D

[punx223]

questgion is if you submit a score to their site which includes your serial number, and you kill the board during the run.... will they rma it??

[ViViD]

i'm w8ing for 1700 mhz record to put my record but i think there isn't yet ! :D

do you think that during this challenge 1800 Mhz will be reach ?! :D

My Great Master Break The Record:up::up:

http://valid.canardpc.com/show_oc.php?id=478507
http://ddr2-1508.gigabyte.com.tw/
It's Too Far From Second Record Breaker:D

[Marco André]

Insane speed! :eek: :D Let's wait for more backups

[sandlewood]

amazing frekuency:up::up::clap:

[hey]

come on!! let someone post 900+ :D

[Shahryar_NEO]

amazing frekuency:up::up::clap:

Thanks . :up:


Insane speed! :eek: :D Let's wait for more backups

Thanks ! :D


My Great Master Break The Record:up::up:

http://valid.canardpc.com/show_oc.php?id=478507
http://ddr2-1508.gigabyte.com.tw/
It's Too Far From Second Record Breaker:D

Thanks m8 !

( Iranian OverClocking:D)


come on!! let someone post 900+ :D

:eek: :shocked:

[Hazzan]

i'm w8ing for 1700 mhz record to put my record but i think there isn't yet ! :D

do you think that during this challenge 1800 Mhz will be reach ?! :D

well done ...!! nice to see you in first place keep pushing .....:):)

Amazing work guys.....:):)

[redratamd]

Very good frequency :clap:
Which Vdimm ? & bios used ?
Maybee mobo limited for others records breakers .

[Aerou]

questgion is if you submit a score to their site which includes your serial number, and you kill the board during the run.... will they rma it??

:shakes:

Can't answer that, but you know what is written under Terms & Conditions, do you?

[Vivi]

My Great Master Break The Record:up::up:

http://valid.canardpc.com/show_oc.php?id=478507
http://ddr2-1508.gigabyte.com.tw/
It's Too Far From Second Record Breaker:D

do u have a pic of setup? or forum post? just curious as you can understand, that is not a low score

[Aerou]

no ,that is a very low score ... for DDR3 :D
I honestly didnt expect much over 1600 at the beginning

[Shahryar_NEO]

well done ...!! nice to see you in first place keep pushing .....:):)

Amazing work guys.....:):)

Thanks m8 :D


Very good frequency :clap:
Which Vdimm ? & bios used ?
Maybee mobo limited for others records breakers .

thanks my friend :up:

BIOS is F4 but i'll test with F6 at the end of competition .

vDIMM = 3.1 :D ( Special Thanks To Hassan )

honestly my memory modules are the best ! :D


do u have a pic of setup? or forum post? just curious as you can understand, that is not a low score

i don't have any picture from the last day that i breake the record but i wrote a review for my iranian hardware website :

http://www.shahrsakhtafzar.com/report/ShahrSakhtafzar-DDR2-Record-1760Mhz.html

on this report you can see some pictures from some other days but last day i have to work without heatspreader and with LN2 ;)


Aerosupra;3591962']no ,that is a very low score ... for DDR3 :D
I honestly didnt expect much over 1600 at the beginning

:eek::shocked: believe me it's DDR2 :D

But the results of testing is my modules are dead now ! :D

[hey]

i just saw GIGABYTE EP45-UD3LR model in turkey market, it is ud3 too, will they allow this mabo ?? cause it is pretty cheap :D

[Shahryar_NEO]

i just saw GIGABYTE EP45-UD3LR model in turkey market, it is ud3 too, will they allow this mabo ?? cause it is pretty cheap :D

all of UD3 series.

[hey]

all of UD3 series.

but it says

* GIGABYTE Ultra Durable 3 motherboards eligible are GA-EP45-UD3P, GA-EP45-UD3R and GA-EP45-UD3 only.

[Shahryar_NEO]

but it says

* GIGABYTE Ultra Durable 3 motherboards eligible are GA-EP45-UD3P, GA-EP45-UD3R and GA-EP45-UD3 only.

best way is to aks from hicookie ! :up:

[Hazzan]

for while Dual Channel DDR2 1721.08 (http://valid.canardpc.com/show_oc.php?id=491986) I ll be back on next week...:)

[redratamd]

Your validation is corrupted ?? :(

[ViViD]

for while Dual Channel DDR2 1721.08 (http://valid.canardpc.com/show_oc.php?id=491986) I ll be back on next week...:)

Yep It's Rejected:confused::cool:

[bongga]

very nice hazzan..keep pushin;:up:
what vdimm did u use for that clock?


for while Dual Channel DDR2 1721.08 (http://valid.canardpc.com/show_oc.php?id=491986) I ll be back on next week...:)

[Shahryar_NEO]

nice record hassan but i think it's a problem here because CPU-Z Reject your result !!!

[Hazzan]

I know now ....yess I think so my validation ist corrupted :(:(...its ok I ll be back on next week with better result...that memory run without VDIMM mod just run 3.04 volt...:D:D thanks all Guys.. :):)

[ekky]

@hazzan: Keep trying mate..... hope next week would be much better result....

@syahryar: Nice work bro...its gonna hard to beat...

[nut311]

@hazzan: Keep trying mate..... hope next week would be much better result....

@syahryar: Nice work bro...its gonna hard to beat...

i will be waiting your action mas:up:

[Shahryar_NEO]

i'm w8ing for 1800 Record ! to start testing again:D

[Hazzan]

I still cannot understand why CPU Z reject my result .....because still the same rejected with default result :confused::confused: :shrug::shrug:

Default result :

http://valid.canardpc.com/show_oc.php?id=493318

and this Oc result :

http://valid.canardpc.com/show_oc.php?id=491986

its fine with my i7 920 and ASUS P6T

http://valid.canardpc.com/show_oc.php?id=494006

maybe I cant countinued this competition with CPU Z reject my result ....cause now I have backup but I sure If I validation CPU Z reject my result too..:(:(

[Shahryar_NEO]

I still cannot understand why CPU Z reject my result .....because still the same rejected with default result :confused::confused: :shrug::shrug:

Default result :

http://valid.canardpc.com/show_oc.php?id=493318

and this Oc result :

http://valid.canardpc.com/show_oc.php?id=491986

its fine with my i7 920 and ASUS P6T

http://valid.canardpc.com/show_oc.php?id=494006

maybe I cant countinued this competition with CPU Z reject my result ....cause now I have backup but I sure If I validation CPU Z reject my result too..:(:(

hi m8 ,

best way is to contact to canardPC .

btw , test with other mp like 7 o... same ? ( change every device to find what's problem !!! )

[Highgertz]

Hazzan
I have also problems with the validation, I am angry :shrug: :shakes:
http://valid.canardpc.com/show_oc.php?id=494227 1608Mhz G.SKILL F2-9600CL5D-4GBPI

http://s50.radikal.ru/i127/0901/dd/1cd7792f67b4t.jpg (http://radikal.ru/F/s50.radikal.ru/i127/0901/dd/1cd7792f67b4.jpg.html)

[Hazzan]

still have some problem .......I work very hard with this not easy have result like this for me...:shrug::shrug::shrug::shrug::shrug:

http://img516.imageshack.us/img516/5961/862fn0.jpg

http://valid.canardpc.com/show_oc.php?id=494554

and I still have backup DDR2 9++ but I sure same cpu z still reject my result ...:shrug::shrug::shrug::shrug:

[stabias]

Highgertz :shocked: :up: Amazing result for 2*2 sticks!!
Is it with LN2 on MEM? what is the NB cooling?

[Shahryar_NEO]

Hazzan
I have also problems with the validation, I am angry :shrug: :shakes:
http://valid.canardpc.com/show_oc.php?id=494227 1608Mhz G.SKILL F2-9600CL5D-4GBPI

http://s50.radikal.ru/i127/0901/dd/1cd7792f67b4t.jpg (http://radikal.ru/F/s50.radikal.ru/i127/0901/dd/1cd7792f67b4.jpg.html)

amazing record on CL5 and dual 2gb stick ! congratulation :clap:

[hey]

I still cannot understand why CPU Z reject my result .....because still the same rejected with default result :confused::confused: :shrug::shrug:

Default result :

http://valid.canardpc.com/show_oc.php?id=493318

and this Oc result :

http://valid.canardpc.com/show_oc.php?id=491986

its fine with my i7 920 and ASUS P6T

http://valid.canardpc.com/show_oc.php?id=494006

maybe I cant countinued this competition with CPU Z reject my result ....cause now I have backup but I sure If I validation CPU Z reject my result too..:(:(

that is sucks bro, we got the same X with FSB testing of msi p45, i had thought it is because we disable cpu core but it seems cpuz has some bugs :down: that is very bad for this competition, good luck to all :up:

[DeDaL]

Hi guys, unfortunately I make some overclock my old good OCZ 7200 SLI edition

http://img525.imageshack.us/img525/3347/img9879uv1.th.jpg (http://img525.imageshack.us/my.php?image=img9879uv1.jpg)

http://valid.canardpc.com/show_oc.php?id=494890


Still air...

[DeDaL]

http://valid.canardpc.com/show_oc.php?id=494975 is it new WR guys ???

[ViViD]

I Don't Think So
It's Rejected Bro But It's Awesome Frquenc

[DeDaL]

Same as Hazzan

All settings is nominal http://valid.canardpc.com/show_oc.php?id=494989

[the-strokes]

http://valid.canardpc.com/show_oc.php?id=494975 is it new WR guys ???

3:5 divider is bugged..its 2:3 in real, but thats not the problem for validation.

i guess the bug is on cpuz,
when ur cpu is not @ default multis..it rejects your result

[Hazzan]

http://valid.canardpc.com/show_oc.php?id=494975 is it new WR guys ???


try with another diveder Bro.....keep pushing....:up::up:

[DeDaL]

it is too funny, but Everest writes same divider:shrug:

[Shahryar_NEO]

welcome DeDal:welcome:

it's 3:5 and in real it's near 1600 mhz ! so to 1760 mhz is a long road . w8 for your next results :up:

[DeDaL]

i try this only for fun, yeah looks 3:5 is fake.
Same settings, first boot 1:2 http://valid.canardpc.com/show_oc.php?id=495270

Air cooling

[Shahryar_NEO]

i try this only for fun, yeah looks 3:5 is fake.
Same settings, first boot 1:2 http://valid.canardpc.com/show_oc.php?id=495270

Air cooling

WoW ! Nice record .

w8ing for 1760 from U :D

[Aerou]

anyone find a BIOS particularly better for high memclocks?

BTW can anybody tell anything more about the rejected cpu-z results? any idea what is causing it?

[Hazzan]

Aerosupra;3620620']anyone find a BIOS particularly better for high memclocks?

BTW can anybody tell anything more about the rejected cpu-z results? any idea what is causing it?


All bios same with high memclock..I try from F3.F4.F5 and F6 all the same for higher memclock...try lower PL on static value on bios maybe you can get higher better memclock...:):)

[Aerou]

ANYBODY EXPERIENCED CPU-Z REJECTION and found a SOLUTION or CAUSE?

[the-strokes]

try 9x multi or default..and disable c1e


Aerosupra;3622117']ANYBODY EXPERIENCED CPU-Z REJECTION and found a SOLUTION or CAUSE?

[redratamd]

With my crappy kit (http://valid.canardpc.com/show_oc.php?id=501592)

No Vmod for the moment . Just 1.62V VMCH & 3V VDimm & LP 10 .

Picture of memory (http://img167.imageshack.us/img167/1865/p1010448sn2.jpg)

Edit :

1680MHz under DI (http://valid.canardpc.com/show_oc.php?id=501658)

Always no Vmod but 3.04V bios & 1.66V VMCH and some windows tweaks .

Just for the fun a run @800MHz 5-5-5-15 TrFC 60 LP9 (http://img5.imageshack.us/img5/1259/screen023gd6.jpg)
Don't look the time . :D Tweaks ,it's for a memory frequency not for the performance .

Edit 2 :

One stick is dead : RIP :(

Edit 3 :

Same thing with Crucial . :(

[Aerou]

Red, you should have put some Sandra or Everest benches at the 800 :D
But sweet results, sprry about the memory, 1Mbit of silence ...

How did they go dead? Dont boot? Died becuase of 3V Vdimm? How long were they exposed to that voltage before dying? Or did the get wet?

[Vivi]

Aerosupra;3634191']Red, you should have put some Sandra or Everest benches at the 800 :D
But sweet results, sprry about the memory, 1Mbit of silence ...

How did they go dead? Dont boot? Died becuase of 3V Vdimm? How long were they exposed to that voltage before dying? Or did the get wet?

all of the above :). haha my ocz's died to volts, was 3.3 for long then 1 run at 3.4 and one stick died ( -100c)

[redratamd]

Aerosupra;3634191']Red, you should have put some Sandra or Everest benches at the 800 :D
But sweet results, sorry about the memory, 1Mbit of silence ...

How did they go dead? Dont boot? Died becuase of 3V Vdimm? How long were they exposed to that voltage before dying? Or did the get wet?

Not installed ( everest & sandra ) on this hdd ,sorry. But Giga it's not faster .
When ,i've changed memory . 2.2V ,no fan it's too hot for her . SpI 32M runned ,go bsod and no reboot . I've killed her . That's the game :p:


all of the above :). haha my ocz's died to volts, was 3.3 for long then 1 run at 3.4 and one stick died ( -100c)

:D RIP too

Every bios ,every settings 2.9V same results with 6 different sticks single or dual ,different slot . Any multiplicater ,any CPU . I've tried to put some sticks direct on the NB hs . Same results . 840MHz . I've tried 5:8 in strap 333MHz ,835MHz.
I think that's the mobo limit . I do 810MHz on air , 820MHz with my icy air spray ( around - 40°C ) and 840MHz under DI .
Maybee flash the bios for an UD3R ,they are on podium . Maybee better .
I will do that just before the limit date .

[Shahryar_NEO]

i need more and more voltage and i think that i need external voltages to ram . is there anybody here that have some idea about use external voltages for modules ?

thanks
Shahryar

[Vivi]

well,

i got 829 3.04 stock max voltage (-79C)
then 832 3.1 - 3.2 ( -85c)
then 838 3.3 (-100C)

so there is increase, but very little

[ME4ME]

guys i have the same problem with validation files that get rejected..

i found this:

http://forum.canardpc.com/showthread.php?t=32274

That seems to be the awnser for my situation, because i uploaded a 5ghz validation, and all my other validations that were lower (because of FSB testing) were rejected..

so it seems you have to wait for at least 5 minuts between each submission.. :down:

[toyone]

Crucial Ballistix Tracer
ep45-ud3r
Dry Ice

my pot:D
http://img6.imageshack.us/img6/5501/13250698ik3.jpg
score:
http://img27.imageshack.us/img27/4964/74559734ra8.jpg

[Vivi]

lol

[toyone]

1:2 it is bad :(

[Hazzan]

Crucial Ballistix Tracer
ep45-ud3r
Dry Ice

my pot:D
http://img6.imageshack.us/img6/5501/13250698ik3.jpg
score:
http://img27.imageshack.us/img27/4964/74559734ra8.jpg


nice .....keep pushing just with dry ice :up::up: try with another diveder...3:5 bugs...

[toyone]

nice .....keep pushing just with dry ice :up::up: try with another diveder...3:5 bugs...

thanks
the rest of the settings not so good :(

[Vivi]

3:5 isnt what you see, 821 is not the real value, so what you get at 1:2 is your real value, probly around 740-760

[toyone]

3:5 isnt what you see, 821 is not the real value, so what you get at 1:2 is your real value, probly around 740-760

ok, thx

[redratamd]

3:5 isnt what you see, 821 is not the real value, so what you get at 1:2 is your real value, probly around 740-760

:) Why you can say that ?

[youngpro]

http://img3.imageshack.us/img3/9181/memorymodym8.jpg ???

[Vivi]

way 2 go james!! you wont post a threat if it isnt worth something, this should be high :)

[[XC] Oj101]

Very nice show us more :D

Unfortunately I don't think it'll cut the grade as the competition draws to a close though. Let's see what happens :)

[redratamd]

http://img3.imageshack.us/img3/9181/memorymodym8.jpg ???

Very nice :up:

[[XC] Oj101]

882MHz :)

[Shahryar_NEO]

882MHz :)

who ?! where is validation ?! it's time to show our back ups:D