View Full Version : True + LianLi PCV2000
HiHo
Guys True is 100% compatible with Lian Li PCV2000?
Cuz i bought a IFX14 and i cant install on the case because of deep :shrug:
thank you so much!
Goreg
10-29-2008, 08:41 AM
From the dimensions on thermalrights website i dont think it will fit...
IFX-14 = Length 146.2 x Width 124 x Height 161 mm
TRUE = Length 63.44 x Width 132 x Height 160.5 mm
as you can see from that the TRUE is only 0.5mm shorter than the IFX
LuckyNV
10-29-2008, 09:03 AM
brai, why exactly can you not fit it, tried rotating 90 degrees?
From the dimensions on thermalrights website i dont think it will fit...
IFX-14 = Length 146.2 x Width 124 x Height 161 mm
TRUE = Length 63.44 x Width 132 x Height 160.5 mm
as you can see from that the TRUE is only 0.5mm shorter than the IFX
See Length 14cm true was 6.3cn
brai, why exactly can you not fit it, tried rotating 90 degrees?
My mobo is 780i have nb cooler ;x
if anyone can show me a true in lianli pcv2000,i will be very smart
Vrykyl
10-29-2008, 02:52 PM
No pics Im afriad, but I am currently happily using a TRUE with dual 120mm fans in an original v1 lian li v2000 - fits perfectly, doesnt touch the side panel at all.
thirdshiftdj
10-29-2008, 03:17 PM
My old setup. I assume the IFX has a problem hitting that divider?
http://img518.imageshack.us/img518/1882/lianliwo7.jpg (http://imageshack.us)
yes it touch on painel ;x
i need sell this ;x
thirdshiftdj
10-31-2008, 10:08 AM
One gripe I have w/ the v2000. Its a huge case but, the motherboard area could borrow alittle more room from the psu and hd compartment
cabbspapp
10-31-2008, 01:30 PM
When I replaced my Asus Commando with my DFI LP UT P35, I had to rotate my TRUE because the CPU socket is closer to the divider plate on the DFI.
maybe i need rotate my TRUE cuz evGA 780i socket is closer?
DeathTyrant
11-30-2008, 04:46 AM
I have the TRUE in my V2000, it fits just fine.
Jamesrt2004
11-30-2008, 05:37 AM
I have TRUE in my Black pearl (rebranded PCV2000) its fine worried a lil as it was very tight with the bottom
can you attach a picture to see me?
DeathTyrant
11-30-2008, 03:59 PM
http://img164.imageshack.us/img164/723/picture003zq1.th.jpg (http://img164.imageshack.us/my.php?image=picture003zq1.jpg)
There. Click to enlarge.
archieb
11-30-2008, 04:40 PM
I think I saw in the V2000 thread someone put some of that sound buffering material in between the heatsink and the midplate.
Specifically here: http://www.xtremesystems.org/forums/showthread.php?t=154982&page=3 about halfway down. That's a v1000 though; it might work for you.
thanks DeathTyrant and archieb.. ill try cuz my mobo is 780i eVGA maybe socket is closer.. but i need see
thanks very much all
ATLPIMP
12-03-2008, 04:17 PM
Socket is closer to the top. My 780i, V1000, TRUE only fit like this:
http://i538.photobucket.com/albums/ff341/mojopops/newsli.jpg
Dimensions of the pcv2000 and v1000 are the same? like mobo tray to divisor ?
trapezoid
12-08-2008, 06:27 AM
Socket is closer to the top. My 780i, V1000, TRUE only fit like this:
http://i538.photobucket.com/albums/ff341/mojopops/newsli.jpg
Bingo! That's the deal breaker right there. That is the only way it will work.
DeathTyrant
12-08-2008, 04:07 PM
My TRUE fitted just fine in my old V2000. It was orientated this way: ||
rather than this way: =