PDA

View Full Version : Blackops + HD4870 + E8600 on dice Results


Gendo
10-24-2008, 12:30 AM
A while ago I've done a few runs with an E8600 on dice on my blackops. I promised to show my results but I haven't had/made time to do it before but here they are:p:

I have to say that one of my (very crappy) sticks of ram wouldn't work that day so I had to run single channel with 1 GB, meaning there was no chance of getting good superpi/pifast scores:(
That didn't stop me from giving superpi a try after I was done 3d benching, just to see what it could do:)

I've added the hardware ranks on hwbot and for 3dmark01 I've also added the global rank. In the other benchmarks I have better scores with different gfx cards.

Sorry for the big pics but I don't have a program to make them smaller yet:p:

Max validation: http://valid.x86-secret.com/show_oc.php?id=433630
Just a tiny bit short of 6Ghz:( Board limited

Superpi 1M:
http://www.coolclocks.nl/datas/users/snag-0002.jpg

Superpi32m:
http://www.coolclocks.nl/datas/users/snag-0003.jpg

And now for the 3d Results. The gfx card used was a stock sapphire 4870 with stock cooler.

3DMark2001 SE: 14th Radeon HD 4870@hwbot. Global Rank: 137th
http://www.coolclocks.nl/datas/users/3dmark014870.jpg

3DMark2003:17th Radeon HD 4870@hwbot
http://www.coolclocks.nl/datas/users/3dmark034870.jpg

3DMark2005: 18th Radeon HD 4870 @hwbot
http://www.coolclocks.nl/datas/users/3dmark054870.jpg

3DMark2006: 23rd Radeon HD 4870@hwbot
http://www.coolclocks.nl/datas/users/3dmark064870.jpg

Aquamark 3: 25th Radeon HD 4870@hwbot
http://www.coolclocks.nl/datas/users/aquamark34870.jpg
raptor1
10-24-2008, 09:38 AM
Hey Gendo

did you get your cellshock memory yet

Raptor1
Gendo
10-24-2008, 02:58 PM
Yeah I've got 'em, just haven't used them yet:p: been busy doing other stuff (cod4:rofl:)
NCspecV81
10-24-2008, 06:46 PM
Something is up.. your 06 looks very weak for those settings.

Here's mine at a much lower speed on the cpu.

http://service.futuremark.com/compare?3dm06=7897250
Gendo
10-25-2008, 06:35 AM
What were you core/mem clocks? My cpu score is a lot higher but your SM 2 & 3 scores are higher. And I assume you were running in dual channel too, this might also be the difference:confused:

With the same cpu speed as mine your score would be around 19.4k or a little higher so the difference isn't that big. Might be your windows install is better for 3d cause I didn't tweak anything
NCspecV81
10-25-2008, 11:59 AM
What were you core/mem clocks? My cpu score is a lot higher but your SM 2 & 3 scores are higher. And I assume you were running in dual channel too, this might also be the difference:confused:

With the same cpu speed as mine your score would be around 19.4k or a little higher so the difference isn't that big. Might be your windows install is better for 3d cause I didn't tweak anything

It was on a different board though? I'm pretty sure it was right around the same speeds you have. I don't remember exactly to be honest with you.
TheGanG
10-25-2008, 12:18 PM
Gendo, good MHz under dice.
U should get better S Pi & 3D performance, push your CellShocks...

Would u please share your BIOS settings?
Gendo
10-25-2008, 02:16 PM
This run wasn't done with my cellshocks. I didn't have them yet. I was using 1333 9-9-9-24 sticks:rolleyes: They were free though so I don't care:p:

Uuh I don't really recall the bios settings:p: I think fsb was like 1.5 and NB around 1.7. I've tried different gtl's and such but nothing added more Mhz.
cadaveca
10-25-2008, 03:25 PM
Gendo, are you on hwbot?
Gendo
10-25-2008, 06:19 PM
Yeah I am. You can guess what my name is over there ;p
HDCHOPPER
10-25-2008, 11:50 PM
ya man dam good diceing clock :)
without a 10 or + multi it going to tuff to get thier for me on ddr2:(

but going to have to try anyways if for nothing else just to see frost :D
cadaveca
10-26-2008, 07:23 AM
Yeah I am. You can guess what my name is over there ;p

I could not ifnd your current scores, hence the question. You've been putting up some nice screens, so i JUST WANTED TO MAKE SURE. ;)
HawaiianSupermn
10-26-2008, 08:36 AM
Dice runs Gendo :D
Gendo
10-26-2008, 11:16 AM
Thanks guys:D I must add that these runs were limited by the board's fsb! I can do these Mhz with 1.7v real (maybe even less), which means I still have a bit more room to increase vcore. More vcore just didn't help on this board so I'm hoping my next run will be on an avenger to push the fsb some more:yepp:

@cadaveca: This is me on hwbot: http://hwbot.org/user.do?userId=15527