Clamps, Clamps, Clamps! Where To Find More Models?

[slim142]

Hi

I remember seeing a couple of days ago a thread that contained information about a brand called Evil something and they had pretty nice clamps.

Well, I would like to know where can I find "bling bling" clamps like the ones from that Evil company. I want my WC system to look as cool as possible and 0.39cent clamps are too simple.

Thanks

[ownage]

http://www.xtremesystems.org/Forums/showthread.php?t=197396

But its fake! :p:
Just high-quality computer render.

[NaeKuh]

Hi

Well, I would like to know where can I find "bling bling" clamps like the ones from that Evil company.
Thanks

His company is rendered. Its not REAL! :rofl:
Even the workers are all rendered.

Iandh makes his clamps for him. You should contact evil tho and inquire about it.

[slim142]

http://www.xtremesystems.org/Forums/showthread.php?t=197396

But its fake! :p:
Just high-quality computer render.

God, I knew there was a trick :rofl:
Read that so fast I didnt even noticed it!
Suck nice clamps couldnt be real :rolleyes:


Go to your local bicycle shop.. :ROTF:

I'll try :rofl:

No seriously, are those 39cent the best (and only) clamps you can get on the market?
Do you recommend me clamps or zip ties?

[NaeKuh]

slim there not fake anymore.

as i said iandh makes them now for evil, so you need to pm evil and ask.

[BreeSpree]

http://www.sidewindercomputers.com/hoseclamps.html

These all work. I like worm clamps.

[slim142]

slim there not fake anymore.

as i said iandh makes them now for evil, so you need to pm evil and ask.

PM sent, hope I can get an answer soon (and that they are for sale) :up:


http://www.sidewindercomputers.com/hoseclamps.html

These all work. I like worm clamps.

Yeah I checked sidewinder but the clamps are just like any other.

[BreeSpree]

BP Compressions... :up:

Oh yeah, those are pure smex, if you have a bunch of blocks in your loop, $7 a pair gets to be a bit much though. And if you have inlet/outlet really close together, that doesn't really help either. But, compressions are the cleanest looking and most comfortable way to ensure your system is leakproof. No smashing smaller tubing on larger fittings.:ROTF: I seriously scratched my knucles trying to get 7/16 on a 1/2 MOSFET high-flow Ek fitting one time.

[slim142]

BP Compressions... :up:

1/2 ID 3/4 OD makes it impossible to use on D-Tek blocks as well as many other stuff :(

[NaeKuh]

i stopped using compression because its a PITA to remove.

Lately im doing a lot of swaping, for final i7 build. :X

[BreeSpree]

i stopped using compression because its a PITA to remove.

Lately im doing a lot of swaping, for final i7 build. :X

Oh yeah, major PITA to do anything after it's on. In order to take it out with a wrench, you have to take off the compression first, and then try to wrench it off.:shakes:


1/2 ID 3/4 OD makes it impossible to use on D-Tek blocks as well as many other stuff :(

You can use 45 degree fittings if you really want to use D-Tek and compressions. BP makes the 90 degree, and Feser makes a 90 degree compression.:up:

[Skauneboy]

I use these (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=298&products_id=24002) myself. They are a bit tricky to install since you'll need to use a pair of pliers to open them enough to slip over the tubing but look alot better than those fugly worm-drive clamps me thinks.

[BreeSpree]

I use these (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=298&products_id=24002) myself. They are a bit tricky to install since you'll need to use a pair of pliers to open them enough to slip over the tubing but look alot better than those fugly worm-drive clamps me thinks.

$0.99 each though. They do look better than worm clamps, but say fittings are 2.50 each. That's $5.00 already for a single block. Add in those clamps and then it's $7.00. Could have just gotten a pair of compression fittings.:eek:

[crazy1323]

Oh yeah, major PITA to do anything after it's on. In order to take it out with a wrench, you have to take off the compression first, and then try to wrench it off.:shakes:



You can use 45 degree fittings if you really want to use D-Tek and compressions. BP makes the 90 degree, and Feser makes a 90 degree compression.:up:


Where can I get a Feser 90 degree 1/2" X 3/4" compression fitting?

[BreeSpree]

Where can I get a Feser 90 degree 1/2" X 3/4" compression fitting?
http://www.sidewindercomputers.com/ferocofig1th.html

There you go!:up:

[BreeSpree]

$7/pair...:ROTF: try $14/pair

Some don't live on your frugle budget *(no offense)*

SS Wormdrives are fugly...



Yes my bad, $14 a pair. :ROTF:
Why people call me poar. :para: I'm not poor. :(
So the wormdrives don't look too nice, they do the job.

[evil-98]

Hey, ill update my thread as more info comes, they will go on sale asap so just stay tuned :up:

also this world is render! I am the matrix! muahaha

[IanY]

I'm real ghetto then :)

Free black plastic Swiftech barbs that come with stuff and zip ties from Radio Shack (50 for $2.50 lol.. covers at least 25 barbs lol) :p:

[BreeSpree]

Your not ghetto. Your normal.
Were just all crazy.
Or Xtreme.
Or whatever.
:cool:

[101]

Gap free, tongue and groove pinch clamps from mcmaster. Last clamps you will ever switch to, but don't have the ultra mega water cooling extreme branding and mark-up.
http://www.mcmaster.com/#catalog/114/254

[Lloyd]

i stopped using compression because its a PITA to remove.

Lately im doing a lot of swaping, for final i7 build. :X

In what way a PITA?
Never had an issue with any i've used 10mm - 1/2"

[slim142]

http://www.sidewindercomputers.com/ferocofig1th.html

There you go!:up:

Hey BreeSpree
BP is sold out everywhere so I think I will have to go Feser. Will they fit on the D-Tek Fuzion V2 CPU & GPU blocks? What about the EK Res.250? (I would also ask you about the BP 790i Black Freezer but it isnt out yet)

If they fit ok, I would use them on my two D-tek GPU blocks, Fuzion V2 CPU block, BP 790i Black Freezer block and my EK 250 Rev.2 Res. However, since they are curved, will they affect/restrict my flow in any way?


Hey, ill update my thread as more info comes, they will go on sale asap so just stay tuned :up:

also this world is render! I am the matrix! muahaha

Please tell me is before two weeks as I will need everything ready in my house by Oct.10 and I would really like to use your clamps and save some money from compression fittings :up: