OC help Am2 5000+ BE + Asus M2n Sli deluxe

[kiyu]

Hello everyone!!

I am Andres from Argentina! LOL to far and this is my first post!!! jejeje :P :D

Well I am overclocking my PC

Asus m2n Sli deluxe Bios 1302
Am2 5000+ Black edition
TRUE 120 + Scythe Ultra kaze 133 cfm (really nice)
Gskill 2x2 Pi edition 1066 5-5-5-15

Vmemo 2.1
Vcore 1.4
and the max oc I can reach is 3214 Fsb 200 multi 16
Here is the validation with CPU-Z
http://valid.x86-secret.com/show_oc.php?id=412194

I try to reach more but nothing = (

Any idea?

I am trying puting FSB 250 HTT x 4 Multi x 14 vcore 1.5 but (3.5) Not work = ( black screen I have to reset my pc 2 times and cmos restarted to default.

Another question..
Sometimes in Orthos I get "ERROR: ILLEGAL SUMOUT" 100 warnings stopped

At 3.2 the Temp is about 40C (105F) full load
Thanks in advance!:D

[BSW_rama]

my PC
A64 x2 4600 windsor
M2N-SLI Deluxe bios 1604
memory transcend 6400 5-5-5-16-21
cooler mini typhoon :)
runing at 3420 (285x12) stable, VID 1,5625 or 1,4750 in idle. t*~60*C

[BSW_rama]

http://www.postimage.org/gxtFUa0-7db57ef762d8e5ac377648aa32b9951b.jpg

[Stage1Ocer]

Hey Andres, Looks like you hit a good oc on the 5000+ BE however; I would try instead of the multiplier ocing try a combination of fsb freq. and as a result the Hyper Transport will change. That particular board can probably handle a 1100-1200mhz Hyper Transport, but try to lower your ht when your increasing the the frequency of the processor. Avoid adding voltage to the Chipset if possible don't push the Frequency too much to the point where you have to supply a little too much to the chipset to the point where it gets too hot(its a passive heatsink). Try to increase it without adding any voltage and getting it as stable as possible. To sum it up, on my M2N32-SLi Deluxe I was able to hit 3.1 for a while then it BSOD. Possibly due to a ram issue, since you have 1066 it shouldn't be much of a problem in my opinion. Nice OC. Btw, how are you monitor your temps. Bioses usually off by a little, software don't trust that much. Maybe try lapping the cpu that should help with temps and give you a little more headroom to play with. Good luck, and kudos to your OC.

Here is a video on lapping:

http://www.youtube.com/watch?v=sVXuZTuoEuE




Hello everyone!!

I am Andres from Argentina! LOL to far and this is my first post!!! jejeje :P :D

Well I am overclocking my PC

Asus m2n Sli deluxe Bios 1302
Am2 5000+ Black edition
TRUE 120 + Scythe Ultra kaze 133 cfm (really nice)
Gskill 2x2 Pi edition 1066 5-5-5-15

Vmemo 2.1
Vcore 1.4
and the max oc I can reach is 3214 Fsb 200 multi 16
Here is the validation with CPU-Z
http://valid.x86-secret.com/show_oc.php?id=412194

I try to reach more but nothing = (

Any idea?

I am trying puting FSB 250 HTT x 4 Multi x 14 vcore 1.5 but (3.5) Not work = ( black screen I have to reset my pc 2 times and cmos restarted to default.

Another question..
Sometimes in Orthos I get "ERROR: ILLEGAL SUMOUT" 100 warnings stopped

At 3.2 the Temp is about 40C (105F) full load
Thanks in advance!:D