cirthix
09-14-2008, 06:29 PM
pics now half-sized
Been working on this one for a while. I'll let the pics explain things.
Things that still need to be done:
1: make/enlarge the vent for the cpu air intake
2: eliminate the small ~2mm gap between the sidepanel and front of the case.
3: fill the gap in the front of the case
4: find where a reset button can be attached to the motherboard and use the lower button on the front panel for reset.
5: add wireless antennae and mini-pcie slot
6: replace 120mm fan with a pwm one.
7: remove disk activity and eject logos from front plexi
Specs:
Q6600@3.2ghz 1.42v (3.6 ok too)
8gb ocz ddr2-1000
evga 8800gt (stock cooling)@720/1800/1900
750gb samsung F1+4gb software ramdisk (boot+apps)
520HX corsair power supply
All crammed into a p35 SHUTTLE!
pics unordered. The hdd sitting on the psu is temporary, only the one in the front is meant to be there.
http://cryo-laboratory.com/uploader/files/12/P2090119.JPG
http://cryo-laboratory.com/uploader/files/12/P2150002.JPG
http://cryo-laboratory.com/uploader/files/12/P2150003.JPG
http://cryo-laboratory.com/uploader/files/12/P2150004.JPG
http://cryo-laboratory.com/uploader/files/12/P2150005.JPG
http://cryo-laboratory.com/uploader/files/12/P2150006.JPG
http://cryo-laboratory.com/uploader/files/12/P2150007.JPG
http://cryo-laboratory.com/uploader/files/12/P2150008.JPG
http://cryo-laboratory.com/uploader/files/12/P2150010.JPG
http://cryo-laboratory.com/uploader/files/12/P2150011.JPG
http://cryo-laboratory.com/uploader/files/12/P2150018.JPG
http://cryo-laboratory.com/uploader/files/12/P2150019.JPG
http://cryo-laboratory.com/uploader/files/12/P2150020.JPG
http://cryo-laboratory.com/uploader/files/12/P2150021.JPG
http://cryo-laboratory.com/uploader/files/12/P2150022.JPG
http://cryo-laboratory.com/uploader/files/12/P2150025.JPG
Been working on this one for a while. I'll let the pics explain things.
Things that still need to be done:
1: make/enlarge the vent for the cpu air intake
2: eliminate the small ~2mm gap between the sidepanel and front of the case.
3: fill the gap in the front of the case
4: find where a reset button can be attached to the motherboard and use the lower button on the front panel for reset.
5: add wireless antennae and mini-pcie slot
6: replace 120mm fan with a pwm one.
7: remove disk activity and eject logos from front plexi
Specs:
Q6600@3.2ghz 1.42v (3.6 ok too)
8gb ocz ddr2-1000
evga 8800gt (stock cooling)@720/1800/1900
750gb samsung F1+4gb software ramdisk (boot+apps)
520HX corsair power supply
All crammed into a p35 SHUTTLE!
pics unordered. The hdd sitting on the psu is temporary, only the one in the front is meant to be there.
http://cryo-laboratory.com/uploader/files/12/P2090119.JPG
http://cryo-laboratory.com/uploader/files/12/P2150002.JPG
http://cryo-laboratory.com/uploader/files/12/P2150003.JPG
http://cryo-laboratory.com/uploader/files/12/P2150004.JPG
http://cryo-laboratory.com/uploader/files/12/P2150005.JPG
http://cryo-laboratory.com/uploader/files/12/P2150006.JPG
http://cryo-laboratory.com/uploader/files/12/P2150007.JPG
http://cryo-laboratory.com/uploader/files/12/P2150008.JPG
http://cryo-laboratory.com/uploader/files/12/P2150010.JPG
http://cryo-laboratory.com/uploader/files/12/P2150011.JPG
http://cryo-laboratory.com/uploader/files/12/P2150018.JPG
http://cryo-laboratory.com/uploader/files/12/P2150019.JPG
http://cryo-laboratory.com/uploader/files/12/P2150020.JPG
http://cryo-laboratory.com/uploader/files/12/P2150021.JPG
http://cryo-laboratory.com/uploader/files/12/P2150022.JPG
http://cryo-laboratory.com/uploader/files/12/P2150025.JPG