New Aegis Panel 1.02.34

[LardArse]

http://www.filefactory.com/file/8cc71d/n/AegisPanel10234_rar

Fixed the PLL reading wrong.

[negev]

What about cpu temp being wrong? Or is the cpu temp in Aegis some kind of external temp and not an average of the core temps?

[HDCHOPPER]

this is only for BlackOps ?

[grungero]

Both for BlackOps and MARS?

[LardArse]

Both for BlackOps and MARS?

Yes it should work for MARS too.

[grungero]

Ok. Thanks sham. :D

[HDCHOPPER]

insted of a RAR would it be possible to get it in a plain ole zip pleaseeeeeeeeeee
trying to keep my hot rod hd striped down and simple :)

[grungero]

It works! Thanks!! :D

[negev]

Installer hangs for me..

[grungero]

No problem here though.

[HDCHOPPER]

It works! Thanks!! :D

:eek: wow good !! now if a zip comes alonggggggggg eye would be like this :D

[grungero]

Try this. I uploaded this for you. :D

AegisPanel10234.zip (http://www.filefactory.com/file/edf65e/n/AegisPanel10234_zip)

[HDCHOPPER]

allll right !! thank you grungero !!

edit*... got the 8 multi fixed !! weeeee haaaaaa

http://img4.glowfoto.com/images/2008/09/02-2205298077T.jpg (http://www.glowfoto.com/viewimage.php?img=02-220529L&y=2008&m=09&t=jpg&rand=8077&srv=img4)

[grungero]

No problem! :D

[LordIT]

Thank you very much! That`s unblievable! A new Panel for the Mars. The other ones are only for Blackops.

[saaya]

great so see its working now! :D
hdchopper, nice desktop background!

[HDCHOPPER]

ya got the back ground from here forget where tho hahahaa

also just today got my dominators 8888 ram in and messing around notised that slecting 101 pcie in bios = 81 in windows ??? with the new aegis ?? go figger anyways saaya if ya could read my MARS post and help me out http://www.xtremesystems.org/forums/showthread.php?t=200932 thx :D

[TheGanG]

Works good, thanks... :)

[HDCHOPPER]

any one else getting the pcie problum between the aegis panel & bios ???

[LordIT]

I had FSB 266x10 @1066Mhz CL5 in BIOS.

I only adjusted from FSB 266 to FSB 267 in Aegis Panel 1.0.2.14 and my screen froze immediately.
I did the same with Version 1.0.2.34. I went up to 290x10 @1163 Mhz and down to FSB 225x10. The screen froze @224x10. Yes, the new version works fine.
I guess that you can move inside a 66 Mhz FSB strap. Is that true?

[Xello]

I'm not sure about using Aegis to do extensive tweaking, personally i always restarted and changed settings in the bios itself. Might not matter, but if you're having problems using Aegis to change stuff you might want to try using the bios as normal instead.

Chopper, i have default 100mhz pci-e bus in bios and it shows as 100 in Aegis. Never had to change it so far (not sure what increasing it does tbh)

[HDCHOPPER]

my old ati 550x vid card would work with pcie up to 140 or so it helped a lot in scores but got a better card now & it doesnt like much past 110 pcie .. but for normal overclocking 101 pcie is the norm all of the other versions of aegis panel has worked pretty goos for reading the bios correctly just saw last night that with this version 1.0.2.34 that slecting 101 pcie in bios and in windows the aegis panel says 81 ??? now no other aegis panel goes below 100 did have the .14 panel do this once in a while but it was after 140pcie slected in bios it would start counting down from 90 hahahhaa .. like 141 would be 90 ans 142 would be 89 ect.....

but any ways going below 100 isnt supposta happen .. but doing a 2006 mark test on 90 did yeild better score hahahahahahaa


shams tutorial's say to go to 101 pcie also ... not just him but by and large most ppl use 101 as the norm for ocing

[naokaji]

cpu temps are still brutally wrong, well, atleast it shows a nb temp now (which the older version never did for me for some unknown reason).
Volts are pretty close to bio settings and clocks are spot on.

http://i34.tinypic.com/1zc0qwp.jpg

(yes, its true, I'm a blackops fanboy):cheer:

btw, will aegis panel continue to exist with x58 or will we get something with a bit more options? (one thing gigabyte got right is easytune, more options than any other windows oc software).

[Xello]

cpu temps are still brutally wrong, well, atleast it shows a nb temp now (which the older version never did for me for some unknown reason).
Volts are pretty close to bio settings and clocks are spot on.

(yes, its true, I'm a blackops fanboy):cheer:

btw, will aegis panel continue to exist with x58 or will we get something with a bit more options? (one thing gigabyte got right is easytune, more options than any other windows oc software).

Hi there, are those your idle temps? If so, then it's RT that is way off and Aegis is spot on. That's how it was for me, too, RT was showing my cores about 5 degrees above Aegis and although it has idle calibration values after spending a good 2 or 3 hours trying to get that to sync with what Aegis was showing (which was correct) i just sent that program to the recycle bin!

[naokaji]

Hi there, are those your idle temps? If so, then it's RT that is way off and Aegis is spot on.

nah, thats semi load temps (wcg running, prime small fft's pushes them higher), just ignore temp of core one it has a bad temp sensor, anyway, temps in the 40's for a oc'd quad on water is pretty normal and 32C is more like what I have immediately after booting.

[Aura89]

I just got my Foxconn Destroyer and everything has been fine with the exception of this utility, i can not get it to start, i have downloaded this version which says it works with the Destroyer, yet whenever i try to start the program, i see it starting and it crashes, wondering if anyone else has this problem or if anyone could help? i have taken a picture to show that it just plainly crashes right when i start it


My system is as fallows:

Windows Vista Ultimate 64bit
AMD Athlon 6000+ @ 3.3Ghz
OCZ Titanium DDR2 800 (2x2) 4Gb
FSP Group 600W 4-rail PSU
8800 GT Graphics card
Foxconn Destroyer 780a Motherboard

http://i6.photobucket.com/albums/y226/Aura89/aegiscrash.jpg

[HDCHOPPER]

eye get that message uasually when my ram is not stable or my oc is to massive


good luck

[Aura89]

eye get that message uasually when my ram is not stable or my oc is to massive


good luck

well that would be interesting, lol i have my ram and CPU currently set to normal and still no go

[HDCHOPPER]

well then ... uninstall & reinstall

try using REVO unstaller it's free and really works big time !
compared to the pos intel uninstaller which leaves a lot of stuff behind you would be suprized how bad intel uninstaller really is

[Aura89]

well then ... uninstall & reinstall

try using REVO unstaller it's free and really works big time !
compared to the pos intel uninstaller which leaves a lot of stuff behind you would be suprized how bad intel uninstaller really is

still no go :(

[HDCHOPPER]

did the first aegis panel for the destroyer work ?
and then you tried this aegis panel and it's a no go?

saaya the man to get in contact with btw he will return your messages

[LordIT]

Did you install Aegis Panel on System C:/? Sometimes it doesn’t work if you choose a separate path.

[Aura89]

I did install Aegis Panel into the C drive as i did not change the default course, as to if i have used any earlier ones.. not yet

[HDCHOPPER]

ya try to download the first aegis panel for your board listed see if it works

then maybe update to the new one maybe thiers some code in the first edition that the lastest edition uses :shrug:

[LordIT]

I adjusted PCIe 101 Mhz in BIOS. Aegis Panel monitored 80 Mhz only. That is a bug. The tool SetFSB works correctly with the Foxconn Mars clock generator:
http://www.abload.de/img/1rnw.jpg (http://www.abload.de/image.php?img=1rnw.jpg)

I adjusted 124,8 Mhz in SetFSB and Aegis Panel had 100 Mhz only.

Aegis Panel doesnt clock PCIe properly! :down:

[Bullet92]

It's true, when I select 100MHz for PCI-E in Aegis Panel, SetFSB shows me 125MHz :confused:

[HDCHOPPER]

I adjusted PCIe 101 Mhz in BIOS. Aegis Panel monitored 80 Mhz only. That is a bug. The tool SetFSB works correctly with the Foxconn Mars clock generator:
http://www.abload.de/img/1rnw.jpg (http://www.abload.de/image.php?img=1rnw.jpg)

I adjusted 124,8 Mhz in SetFSB and Aegis Panel had 100 Mhz only.

Aegis Panel doesnt clock PCIe properly! :down:


yes this is my results exaly also using the old aegis panel .14 or .15 puts everything back to normal but ofcourse no oc button

[LordIT]

@Bullet92:
Do you use an Asus board (signature)with Aegis Panel? :lol2:

[Bullet92]

Hehe... No, I have Foxconn Mars ;)

[LordIT]

That`s nice because there aren`t so many members with the Mars. :)

[kimohw]

is this the latest Aegis version available?

[HDCHOPPER]

yes it's in a aegis panel thread around here somewhere search it

[Gendo]

Hehe for the mars it's not even so bad. On my blackops setfsb is showing 168 for pci and 56.1 for pci-e. they are at 100 and 33.6 in the bios.:rofl: Gotta love the foxconn boards:D

[LordIT]

Hehe for the mars it's not even so bad. On my blackops setfsb is showing 168 for pci and 56.1 for pci-e. they are at 100 and 33.6 in the bios.:rofl: Gotta love the foxconn boards:D
:ROTF::ROTF::ROTF:


But that Aegis Panel is good for adjusting the voltages and changes the FSB a bit - at least on the Mars.
The download link in Post #1 doesnt work. Shall we upload the version again?

[LordIT]

@saaya:
Can the wrong PCI-e voltage read in Aegis Panel be fixed?

[saaya]

I adjusted PCIe 101 Mhz in BIOS. Aegis Panel monitored 80 Mhz only. That is a bug. The tool SetFSB works correctly with the Foxconn Mars clock generator:
http://www.abload.de/img/1rnw.jpg (http://www.abload.de/image.php?img=1rnw.jpg)

I adjusted 124,8 Mhz in SetFSB and Aegis Panel had 100 Mhz only.

Aegis Panel doesnt clock PCIe properly! :down:
hmmm i emailed the api engineer about this.
sorry guys...


It's true, when I select 100MHz for PCI-E in Aegis Panel, SetFSB shows me 125MHz :confused:
hmmm so the real pciE speed was 125Mhz? thats not good...
that would explain the nvidia vga issues some people here had...


Hehe for the mars it's not even so bad. On my blackops setfsb is showing 168 for pci and 56.1 for pci-e. they are at 100 and 33.6 in the bios.:rofl: Gotta love the foxconn boards:Dthat has nothing to do with our boards actually, the tool doesnt read the PLL correctly. setfsb doesnt actually support the pll we use, but an older version which is compatible... just not 100% compatible as you can see from the pci clocks :D

i emailed the author of setfsb but got no reply...
if you can get int otuch with him and hook me up, then i can give him all he needs to add full support for the newer plls. not only the ones we use at foxconn btw, so it would be good for setfsb in general :)


@saaya:
Can the wrong PCI-e voltage read in Aegis Panel be fixed?
im pretty sure...
most of these things are just bugs in the code...

this is what i need to file a complaint to the api engineer to fix a bug:
board (Mars)
bios (G30)
windows (xp sp2 32bit)
app version (1.2.2.22)
screenshot of the error

if you can give me those details that would be really great, so i can get aegis panel improved bit by bit :)

[LordIT]

this is what i need to file a complaint to the api engineer to fix a bug:
board (Mars)
bios (G30)
windows (xp sp2 32bit)
app version (1.2.2.22)
screenshot of the error

if you can give me those details that would be really great, so i can get aegis panel improved bit by bit :)

board (Mars; signature)
bios (P08; G26; signature)
windows (xp sp2 x64 edition, signature)
app version (Aegis Panel 1.0.2.34)
sreenshot of the error ( posting #35)

I wish the engineers can fix it. Thanks for that. :)

[Bullet92]

hmmm so the real pciE speed was 125Mhz? thats not good...
that would explain the nvidia vga issues some people here had...

That's right. If you want I can make SS and post.

........ BIOS ........... SetFSB ........ AEGIS panel .........

#1 - 100MHz -----> 100MHz -----> 100MHz
#2 - 101MHz -----> 101MHz -----> 81MHz
#3 - 101MHz -----> 125MHz -----> 101MHz

#1 100MHz set in BIOS, SetFSB and AEGIS report 100MHz
#2 101MHz set in BIOS, SetFSB report 101MHz but AEGIS 81MHz
#3 101MHz set in BIOS than set 101MHz in AEGIS but SetFSB report 125MHz

[saaya]

board (Mars; signature)
bios (P08; G26; signature)
windows (xp sp2 x64 edition, signature)
app version (Aegis Panel 1.0.2.34)
sreenshot of the error ( posting #35)

I wish the engineers can fix it. Thanks for that. :)
yes, i assumed your sig settings are up to date and already emailed him yesterday :) ill let you know once theres a new version :D


That's right. If you want I can make SS and post.

........ BIOS ........... SetFSB ........ AEGIS panel .........

#1 - 100MHz -----> 100MHz -----> 100MHz
#2 - 101MHz -----> 101MHz -----> 81MHz
#3 - 101MHz -----> 125MHz -----> 101MHz

#1 100MHz set in BIOS, SetFSB and AEGIS report 100MHz
#2 101MHz set in BIOS, SetFSB report 101MHz but AEGIS 81MHz
#3 101MHz set in BIOS than set 101MHz in AEGIS but SetFSB report 125MHz
hmmm so aegis panel reads pciE clocks around 20mhz too low if its not 100... weird... i already emailed the API guy about this too :)

[Bullet92]

hmmm so aegis panel reads pciE clocks around 20mhz too low if its not 100... weird... i already emailed the API guy about this too :)

That's right, waiting for response ;)

OT:
I added you on msn but I know that you are too busy for msn or I'm wrong? :D

[thebanik]

hmmm so aegis panel reads pciE clocks around 20mhz too low if its not 100... weird... i already emailed the API guy about this too :)

I can confirm this for foxconn mars.....though i cannot confirm the bump in setfsb when setting it as 100 on aegis...

[saaya]

That's right, waiting for response ;)

OT:
I added you on msn but I know that you are too busy for msn or I'm wrong? :Dyepp :D


I can confirm this for foxconn mars.....though i cannot confirm the bump in setfsb when setting it as 100 on aegis...you mean you havent tried or for you the pciE speed does not result in 125 if you set 100 in aegis panel?
thanks for the feedback! :toast: