6 Ghz at NVISION

[Xanadu]

Fugger is becoming quite a celebrity isn't he?;)

http://www.tgdaily.com/content/view/39064/135/

[villa1n]

lol, they tell us he ran super pi... but don't post the time!!!

[philbrown23]

man this dude is famous

[Quadwing]

ha, but what chipset did FUGGER use in that setup @ NVision..?

[tekjunkie]

ha, but what chipset did FUGGER use in that setup @ NVision..?

Lol, good question. It's definitely an intel board(Asus ROG logo with a red and blue theme ,third picture from top left). I bet it's a rampage extreme.

EDIT: AFter looking closely at the above mentioned picture, I can confirm that it's a rampage extreme. The red toggle button thingys which can change FSB on the fly is very visible.

[Swatrecon_]

Wonder how it would do in Crysis, with some GTX 280's? :lol:

[Charles Wirth]

7.7s pi time 6007Mhz
Asus Rampage Extreme
Asus Top GTX 280
Asus Booth
Poked around at desktop most of the time, idling at 6Ghz. Dopped down to 5.8Ghz, went to lunch and came back an hour later to pickup where I left off.


The only other overclockers is Vince and Peter (Shimano...)

[[XC] gomeler]

Cascade looks dirty, needs some cleaning ;)

[Swatrecon_]

7.7s pi time 6007Mhz
Asus Rampage Extreme
Asus Top GTX 280
Asus Booth
Poked around at desktop most of the time, idling at 6Ghz. Dopped down to 5.8Ghz, went to lunch and came back an hour later to pickup where I left off.


The only other overclockers is Vince and Peter (Shimano...)

Did you run Crysis?

No, seriously, great job. That's pretty awesome.

[tekjunkie]

The only other overclockers is Vince and Peter (Shimano...)

Let me guess.. Vince is probably using the 790i FTW and Peter is using a Foxconn board, probably the Blackops or the dreadnought(even though it's not in production anymore) and both are using ln2.

[hecktic]

the phrase "dam Im good" by Duke nukem comes to mind lol.... only in this case its "Dam Fugger is good" lol :D

[Shadowmage]

I stopped by NVISION today after work. I saw k1ngp1n and shamino overclocking while some booth babes were handing out free stuff. Some dude was getting the crowd all pumped up not because of their amazing overclocking, but in exchange for free stuff. How they could concentrate with that level of noise is beyond me.

Congrats to k1ngp1n and shamino on achieving their world record :cool:

[Solarfall]

6ghz is a great milestone.. congrats :toast:
i'll try to reach the same when i get my E8600 tomorrow (i hardly doubt that it will be stable in 3d at 6ghz who knows maybe i'll get lucky )

[majestik]

I bet it ain't no picnic carrying that triple cascade around.
Probably weights more than Fugger himself :p:

And it's got it's own cart anyways.

...so massive that it requires its own cart to transport around the show floor.

[AuDioFreaK39]

lol I was there as he was approaching 6GHz. I'm at the NVISION GeForce LAN right now ;)


Congrats Fugger

[Charles Wirth]

Thanks guys, back home again safely.

Pretty good show, lots of people and I hit my goal of 6Ghz. Seemed a bit short and ended mid day.

Grats to Vince and Peter on breaking some world records, much harder task that kept them benching half the night at the show.

Chunk and his brother Slim did great for their first time with LN2. Ill post a video later as they closed in on 6Ghz.

Ill post videos and pictures up later when I get settled.

[Philly_Boy]

Nice to see the old girl still can kick out the serious cold!!

Wish I coulda been there to watch the run.

6ghz is an amazing overclock....congrats on that milestone!

[JacobF]

Thanks guys, back home again safely.

Pretty good show, lots of people and I hit my goal of 6Ghz. Seemed a bit short and ended mid day.

Grats to Vince and Peter on breaking some world records, much harder task that kept them benching half the night at the show.

Chunk and his brother Slim did great for their first time with LN2. Ill post a video later as they closed in on 6Ghz.

Ill post videos and pictures up later when I get settled.

Yes, and here is a serious threat to the orb :D

http://img120.imageshack.us/img120/4276/dsc0317xr2.jpg

[Spawne32]

lol the pimp of the overclocking world right there

[JamesBong420]

gotta p|n all them females don't ya k|ng!!¿?!!! :yepp::rofl::up::D:cool::p:

looks like you all had fun!!

[Katanai]

Yes, and here is a serious threat to the orb :D


Haha: "first you get the money, then you get the power, then you get the woman."

[XSAlliN]

Nice Teeth - the rest is covered by LN2 fog so can't see much, but the the teeth look great (withe and well put together).

PS. You shouldn't allow a girl to play with LN2, that cooling is cold but sure can burn if not treated with respect an caution. :)

[Donnie27]

Thanks guys, back home again safely.

Pretty good show, lots of people and I hit my goal of 6Ghz. Seemed a bit short and ended mid day.

Grats to Vince and Peter on breaking some world records, much harder task that kept them benching half the night at the show.

Chunk and his brother Slim did great for their first time with LN2. Ill post a video later as they closed in on 6Ghz.

Ill post videos and pictures up later when I get settled.

Sweet stuff man!

[Yellowbeard]

LMAO, Vince looks like he's doing shots with that girl:toast:

[trans am]

nice job fugger. ..CANT WAIT TO SEE THE VIDEO!
xs should do a e8600 cpu rally. should pull everyones best e8600s and get a few major players and oc the best ones that did on air. since a lot of guys dont have xs cooling. but maybe do well on air and have huge potential on -0.
xs should be at the top of this list of hw bot e8600 :

Ranking For CPU-Z - Core 2 E8600 (3.33Ghz) (limited to top 100)

1. CPU-Z - 6761 mhz - boblemagnifique (Union Francophone Hwbot) - (Core 2 E8600 (3.33G... @ 6761mhz [#1 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2)
11 points - [ inspect ] - [ compare ]

2. CPU-Z - 6579 mhz - tsan (H.O.T. (Hellas O/C Team)) - (Core 2 E8600 (3.33G... @ 6579mhz [#2 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2)
25.1 points - [ inspect ] - [ compare ]

3. CPU-Z - 6554.83 mhz - joe_cool (Team OCX) - (Core 2 E8600 (3.33G... @ 6555mhz [#3 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2)
7.7 points - [ inspect ] - [ compare ]

4. CPU-Z - 6530 mhz - ataruz (Hardware-Arena Turkiye) - (Core 2 E8600 (3.33G... @ 6530mhz [#4 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2)
6.6 points - [ inspect ] - [ compare ]

5. CPU-Z - 6506.89 mhz - Brian y. (Team OCX) - (Core 2 E8600 (3.33G... @ 6507mhz [#5 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2)
5.5 points - [ inspect ] - [ compare ]

6. CPU-Z - 6491 mhz - onepagebook (Team OCX) - (Core 2 E8600 (3.33G... @ 6491mhz on LN2)
19.8 points - [ inspect ] - [ compare ]

7. CPU-Z - 6455.14 mhz - c1rcu1tburn3r (XtremeHardware-OC-Team) - (Core 2 E8600 (3.33G... @ 6455mhz on LN2)
19.2 points - [ inspect ] - [ compare ]

8. CPU-Z - 6427.28 mhz - Crazy Inside (Team OCX) - (Core 2 E8600 (3.33G... @ 6427mhz on Cascade)
18.6 points - [ inspect ] - [ compare ]

9. CPU-Z - 6419 mhz - jmax_oc (JMax-Hardware) - (Core 2 E8600 (3.33G... @ 6419mhz on LN2)
3.5 points - [ inspect ] - [ compare ]

10. CPU-Z - 6403.71 mhz - pippo369 (NBCL [pwd by Tecnocomputer.it]) - (Core 2 E8600 (3.33G... @ 6404mhz on LN2)
17.5 points - [ inspect ] - [ compare ]

11. CPU-Z - 6403.61 mhz - HIWA (no team) - (Core 2 E8600 (3.33G... @ 6404mhz on LN2)
2.9 points - [ inspect ] - [ compare ]

12. CPU-Z - 6403 mhz - MAFRI (HardwareLuxx Germany) - (Core 2 E8600 (3.33G... @ 6403mhz on LN2)
16.5 points - [ inspect ] - [ compare ]

13. CPU-Z - 6403 mhz - mickeymouse (H.O.T. (Hellas O/C Team)) - (Core 2 E8600 (3.33G... @ 6403mhz on LN2)
16.9 points - [ inspect ] - [ compare ]

14. CPU-Z - 6387.04 mhz - Moonman (XtremeSystems) - (Core 2 E8600 (3.33G... @ 6387mhz on LN2)
16 points - [ inspect ] - [ compare ]

15. CPU-Z - 6371.98 mhz - Qballe (Team OCX) - (Core 2 E8600 (3.33G... @ 6372mhz on LN2)
15.7 points - [ inspect ] - [ compare ]

16. CPU-Z - 6356 mhz - Pt1t (OverCleX) - (Core 2 E8600 (3.33G... @ 6356mhz on Cascade)
15.3 points - [ inspect ] - [ compare ]

17. CPU-Z - 6307 mhz - tiborrr (XtremeSystems) - (Core 2 E8600 (3.33G... @ 6307mhz on LN2)
14.6 points - [ inspect ] - [ compare ]

18. CPU-Z - 6300.38 mhz - ZoLKoRn (OverclockZone-Thailand) - (Core 2 E8600 (3.33G... @ 6300mhz on LN2)
14.2 points - [ inspect ] - [ compare ]

19. CPU-Z - 6300 mhz - marco@74 (DimasTech Team - dimastech.com) - (Core 2 E8600 (3.33G... @ 6300mhz on Cascade)
13.8 points - [ inspect ] - [ compare ]

20. CPU-Z - 6299.9 mhz - Raven29 (Hardware-pc) - (Core 2 E8600 (3.33G... @ 6300mhz on LN2)

[kevinbo03]

Thanks guys, back home again safely.

Pretty good show, lots of people and I hit my goal of 6Ghz. Seemed a bit short and ended mid day.

Grats to Vince and Peter on breaking some world records, much harder task that kept them benching half the night at the show.

Chunk and his brother Slim did great for their first time with LN2. Ill post a video later as they closed in on 6Ghz.

Ill post videos and pictures up later when I get settled.

Looking forward to the video! It was nice to meet you as well. :up:

[Bo_Fox]

Yes, and here is a serious threat to the orb :D

http://img120.imageshack.us/img120/4276/dsc0317xr2.jpg

Is that girl in the picture Fugger? Damn, if she is, wow, Fugger!!! :shocked:

[Achill3uS]

FUGGER is not a woman lol :lol:
but the fact is true, this girl is amazing :)

[Buckeye]

Fugger is in that picture ???

[DeDaL]

Please, more pics guys !

[Charles Wirth]

That picis of Vince (K|ngp|n) and Sunshine, she was working the EVGA booth.

A video of my rig.
http://www.youtube.com/watch?v=aqGb8yOOj2M

I posted more video's here;
http://www.xtremesystems.org/forums/showthread.php?t=200247&page=2