New "ATi Tray Tools" with support for HD 4xxx!

[XSAlliN]

Ray got his new card and he moved to the next generation with support from ATi Tray Tools. (http://cid-a50350ea7a969f0c.skydrive.live.com/self.aspx/Public/attsetup.exe) Finlay we have a good alternative for that Crappy CCP. :up:

Version 1.5.8.1250 - it's Beta, but as Ray find out, there's no reason the release a so called stable version, since he updates it weakly and It's always better and more stable. ;)

[exhausted mule]

ahhhhhh

finally :up:

[Xcel]

Maybe I should give it another shot, I love the OSD and custom dynamic fan profiles

[Olly_K]

thanks, going to give this a try now !

EDIT : tried with vista 64 and cannot control the fan, sticking with CCC for now

[jimmyz]

awesome good to see Ray at it again!!!!

[G H Z]

Someone test CF overclocking.

[BulldogPO]

Works with Vista X64??

[Olly_K]

yes works, but I can't use fan control

[ColonelCain]

Very interesting! :up:

Will be keeping my eye on this, for sure. :yepp:

[HousERaT]

Mine has a bug which doesn't keep the clocks after leaving 3D Mode.

[ChaosMinionX]

"failed to start low level driver" for 3870X2


Im on vista 64, anyone else get this error?

[fornowagain]

Yep 4870X2 on Vista64, wont work, driver signing

[initialised]

Ray got his new card and he moved to the next generation with support from ATi Tray Tools. (http://cid-a50350ea7a969f0c.skydrive.live.com/self.aspx/Public/attsetup.exe) Finlay we have a good alternative for that Crappy CCP. :up:

Version 1.5.8.1250 - it's Beta, but as Ray find out, there's no reason the release a so called stable version, since he updates it weakly and It's always better and more stable. ;)Still wont work on V64 Ultimate, oh well

[Xcel]

Oh my, everything works perfectly on xp, complete control over fan speed with the dynamic settings :D

I've missed the OSD since I moved to CCC, it's great to have it back. ATT rocks!

[Truckchase!]

Works fine on Vista x64...

Driver signing fix: http://citadel.x10hosting.com/readydriverplus/

After install use BCDEdit to change "boot" drive to "C:" (or D: or whatever) for the ReadyDriver entry.

Edit: I dunno about fan control; I'm watercooling.

[mascaras]

"failed to start low level driver" for 3870X2


Im on vista 64, anyone else get this error?

yep , here too , asked for digital driver


Works fine on Vista x64...

Driver signing fix: http://citadel.x10hosting.com/readydriverplus/

After install use BCDEdit to change "boot" drive to "C:" (or D: or whatever) for the ReadyDriver entry.

Edit: I dunno about fan control; I'm watercooling.


thnks

regards

[3oh6]

doesn't appear to be working in CF. clocks and fan only adjust for the first card.

[XSAlliN]

doesn't appear to be working in CF. clocks and fan only adjust for the first card.

That makes sense since yesterday Ray did his first CF config:


Not so fast, mate I have now CrossFire , but it will take a long time to fully implement support for it.

He's working on it, just give him time... :up:

[Kai Robinson]

Yeah i installed it but the driver signing issue is a pain and the workaround didn't work for me. And yeah, no CF clocking.

[stangracin2]

another reason to use good old xp

:banana::banana::banana::banana: VISTA

[awdrifter]

You rock! Works perfectly in XP 32bit, oc'd my HD4850 to 725mhz, finally over the 700mhz wall without flashing bios. Thanks.

[Xcel]

You rock! Works perfectly in XP 32bit, oc'd my HD4850 to 725mhz, finally over the 700mhz wall without flashing bios. Thanks.

:yepp: 2D underclocking and 3D overclocking at the same time with different fan profiles each sure rocks!

[initialised]

another reason to use good old xp

:banana::banana::banana::banana: VISTANah, Luddite, the driver fix has it working for my own rig, not sure I'm happy about hacking a customer's OS up that much though, the 790MHz limit in CCC is well below the air cooled limit without tweaking the fans.

[Olly_K]

if your having trouble installing the driver on vista, reboot and press f8 on startup. select disable driver signing and then install it.

[initialised]

if your having trouble installing the driver on vista, reboot and press f8 on startup. select disable driver signing and then install it.Ah so that's what the fix does.

[STaRGaZeR]

Ah so that's what the fix does.

Yes, it press F8 without human intervention. Great tool :D

[initialised]

Yeah i installed it but the driver signing issue is a pain and the workaround didn't work for me. And yeah, no CF clocking.Install the fix then install ATT

[jaredpace]

Looking forward to Ati Tray tools advanced menu options on the R700. With program updates & driver updates, we should see the beast improving in a short time.

[KoHaN69]

Truckchase! you f in ROCK
http://citadel.x10hosting.com/readydriverplus/
is epic win
it's the mose simple and safest way to disable driver signing in x64
no tweaks, no registry, no cmd, all it does is disable driver signing like you officialyl can - by pressing F8 during boot, but it does it for YOU! :shock:


and 4850 fan control works for me on Vista64 :woot:

[Kai Robinson]

Erm, my vista isn't what you'd call legit, so it doesn't work....plus, ATITray tools doesn't do CF overclocking, so i'm not bothered.

[STaRGaZeR]

Erm, my vista isn't what you'd call legit, so it doesn't work....plus, ATITray tools doesn't do CF overclocking, so i'm not bothered.

You don't need a legit Vista, this just press F8 for you at start, nothing more nothing else. This is useful not only for ATT, but for all those programs you can't use because of the damn driver signatures.

[dinos22]

so Xfire still doesn't work?????

how would you OC xfire.......used to be a massive pain in the arse before

[Kai Robinson]

Driver signing is a pain in the arse, but even without that issue, the fact remains IT DOESN'T DO CROSSFIRE OVERCLOCKING.

Dinos - i just edited both card's BIOS to 650/1050 and it works fine.

[dinos22]

thing is for 24/7 that's a decent thing to do

but when you voltmod and try to OC to the max you can't do that you know what i mean

[Soultaker52]

New version 1.5.9.1298 is out, download link is the same! Works fine with my 4870.

[KoHaN69]

"failed to start low level driver" for 3870X2


Im on vista 64, anyone else get this error?

http://citadel.x10hosting.com/readydriverplus/

[@@@@]

it works for me thanks Ray just read the post above and use F8 during boot for the driver signing issue 4870x2 XP 32Bit and Vista Ultimate 64bit

[Xcel]

I didn't notice any differences with the newest version

[bigslappy]

sub'd

[Xcel]

More OSD Options in the newest version! Make sure you get 1.5.1299 otherwise vmem usage doesn't work

http://www.xtremesystems.org/Forums/attachment.php?attachmentid=85480&stc=1&d=1221894433

[XSAlliN]

New version and Vista 64 bit signature fix, here's the log:


. : Chronological Order (the lastest release is on the bottom of this page) : .
- 1.5.8.1240 Beta
+ Overclocking + voltage control
+ Temperature monitoring
+ FAN control , manual + auto by table
* Fixed localization bugs for CrossFire dialog window
* Updated ini files handling procedures to be more compatible with Windows Vista
* Improved compatiblity with IE7 under Vista with UAC enabled.
+ Added new localizations
+ Added option to change "Black and White level"
* Fixed OSD rendering problem with Overlord game. (Thanks to Unwinder)
+ Updated Overlay color handling procedure to support new ATI Overlay color modes
+ Implemented Save/Restore icon positions under WinXP 64 and Vista 64.
+ Updated suppot for Adaptive AntiAliasing. Added support Multi-Samplinmg and Super-Sampling modes
+ Monitoring Graphs window now can be sent to system tray.
+ Added option to auto load Monitoring Graphs window at start up
+ Added option to hide tray icon on load. You can restore icon to access settings by starting ATT again. This will not load second copy of ATT in memory, but will send command to show tray icon. Also added new hotkey to hide and show tray icon.
+ Added configuration option hide_display to hide Displays menu.
* Fixed bug when settings for Crossfire can not be applied
+ Implemented support for HD 2xxx/3xxx video boards. Overclocking, Monitoring, fan control.
+ Implemented support for new AntiAliasing filter modes for HD 2xxx/3xxx video boards
+ Added workaround to fix resume from suspend mode bug
+ Now ATT can restore last used 3D profile after restart. You can enable this behavior in General Options
+ New Monitoring Graphs and OSD plugins. "AMD Cpu CoreTemp" and "Intel CoreTemp" This plugin allows to read core temperatures on AMD 64 CPU's including Dual Core versions and on Intel Core2 (Duo/Quad)
+ New OSD plugin. CPU Load%. Can show cpu load percentage for all available cores or cpu's
+ Implemented 3D detection for DirectX10 applications
+ Added new option in Auto overclocking window : "Apply to all game profiles". Enabling this option tells ATT to apply 2d/3d profiles to all game profiles regardless to the game profile settings.
* Improved ScreenShot routine for DirectX9 games and applications
+ Added ScreenShots capture ability for DX10 games and applications
* VPU Recover option now disabled under Windows Vista
+ Now ATT will forse GI to ON if CCC is not installed
* Improved Display Rotation procedure under Windows Vista 32/64
+ For HD 2xxx/3xxx video boards now you can select "Set Default Clocks" option in game profiles. This option will restore PowerPlay functionality after using overclocking profile.
* Now ticking "Show as DRR" option will not affect Apply button in Overclocking window.
* Now ATT will forse Geometry Instancing ON at start up
* Fixed bug when ATT shows wrong FlipQueueSize and CatalystAI values
* Fixed bug with ATT Shell Extention under Windows Vista
+ Added support for HD 4xxx video boards
+ New monitoring VDDC by driver. This is not real hardware GPU voltage. This value reported by driver itself.
- Now monitoring of free video memory is disabled under Windows Vista because of changes in Vista DirectX videmo memory routines

- 1.5.8.1244 Beta
* Fixed bug when FAN mode and FANM table doesn't automatically applied

- 1.5.8.1250 Beta
+ Implemented solution to avoid "freezes" when ATT updates SharedMemory. But if you get freezes (each seconds or two) you have two ways:
1. Completely disable SharedMemory in general settings of ATT
2. or create game profile for that game/application. In this case ATT can be sure when game active and will try to avoid running heavy procedure like reading current clocks from driver.
This was a reason of freezing.
- removed Show Free Video/Texture memory from FlashOSD under Windows Vista. Because of changes in Vista directx video memory handling procedures

- 1.5.8.1255 Beta
+ Now ATT can read clocks from registers of boards. You have to recreate overclocking profiles because at this time you must save real clocks
+ Show as DRR for GDDR5 now should multiply by 4, not by 2. Owner of 4870 please check it and report

- 1.5.8.1256 Beta
* GDDR5 memory reading code bugfix

- 1.5.8.1259 Beta
* Fixed memory detection for 4870
* Updated raphook.dll for DX10 support

- 1.5.8.1260 Beta
* Fixed bug with AA filter in game profiles

- 1.5.8.1264 Beta
* Updated predefined 3D profiles

- 1.5.8.1267 Beta
+ Added support for tripple buffer and VSync forcing options for Direct3D10 games and applications
* Changed behavior of Force VSync option. Now you can set it to ON /OFF or to ignore

- 1.5.8.1270 Beta
* Fixed version with overclocking with Radeon X1600 Pro and X1950 Pro

- 1.5.8.1271 Beta
* Fixed problem when DX10 games crashes with Autooverclocking enabled and OSD disabled

- 1.5.8.1275 Beta
* fix for HD 3xxx and HD 2xxx boards
+ added FAN RPM monitoring for HD 4xxx

- 1.5.8.1279 Beta
* When you save a profile, FSAA now show saved setting (not global setting)

- 1.5.8.1282 Beta
+ Added some kind of fix for auto FAN mode on 4870

- 1.5.9.1284 Beta
+ Added OverDrive5 support for CrossFire
+ Added Overclocking support for CrossFire
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1290 Beta
* Updated Monitoring Graphs. Added support for Second board in CrossFire mode
+ Applying FAN control now will apply same settings for second board in CrossFire. (If "Apply to both cores/adapters" checked)
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1292 Beta
+ added monitoring of 3 additional diodes for HD 4xxx video boards
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1294 Beta
+ Recreated FlashOSD engine to support new additional sources.
Now FlashOSD can show same values as shown in Monitoring Graphs plus additional OSD plusings.
FlashOSD will automatically wrap first line after displaying 9 values.
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1298 Beta
* Nothing new just updated method to read 3 additional temperature sensors
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1299 Beta
* updated Monitoring graphs and OSD
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1301 Beta
+ For X2 users
1. FAN monitoring, Speed and Duty Cycle
2. FAN Control. Manual and Automatic mode
Automatic mode by fan table is not supported on X2 boards
So you can set or manual or automatic by predefined values. No editing for those values in ATT because of internal structure restrictions
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1303 Beta
* minor fixes
* fixed monitoring graph voltage reading
! Fan recognizing and managing is unstable on this version (err. type "No supported hardware")
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1311 Beta
* fixed fan management
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.5.9.1314 Beta
* some fixes
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1336 Beta
+ introducing version Unicode standard compliant
+ GUI & internal optimization
this version doesn't have nothing new related to hardware managing
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1337 Beta
* location updates
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1340 Beta
* Returned back "Memory used by process" and "API Type" in monitoring and OSD. API Type works only in OSD module. It will be disabled in Monitoring
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1342 Beta
* Fixed bug when ATT unable to start if there no previously used language .ini file exists in LNG folder
* Updated some parts of ATT to fix error when in AA/AF comboboxes you see some scrap instead of numbers (users please check it)
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1344 Beta
* Fixed game shortcut creation
* Fixed creating of shortcut to ATT in StartUp folder
* Fixed problem with AA/AF values in 3D dialog box
+ Added support for 16x AA for CrossFire (only in 3D dialog box)
* Fixed 3D renderer
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1346 Beta
* Fixed bug with screenshots
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1355 Beta
+ Added option to force detect memory as GDDR5 for 4870 with non standard BIOS (can be changed in atitray.ini or in installation procedure)
* Trying to fix Save and restore icon positions Checked and works under 64 bits OSes. Please check under 32 bit (XP and Vista)
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1356 Beta
* Updated Screenshot subsystem
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1360 Beta
* Fix for sleep mode
+ new atitray.ini option. opt_force_unload_att
Set to 1 to force ATT to be unloaded before entering into suspend modes
ATT will be automatically started after resume
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1364 Beta
* Fix for Save desktop icon positions
* SysInfo now shows BIOS information for two boards (if applicable)
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1366 Beta
* Fix for plugins
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

- 1.6.9.1368 Beta
* Try to fix save and restore icons for 32 bit OSes
! CF function will work ONLY under Vista. No XP support yet, sorry Supported only HD 3xxx and HD 4xxx boards. HD 3xxx not tested.

A permanent Download link. (http://sna696.helloweb.eu/ray/index.php)

A new way to bypass Driver Signature in Vista 64: ATT Vista 64 loader (http://forums.guru3d.com/showthread.php?t=275261)

[Kasparz]

Thanks!

[safan80]

Driver signing is a pain in the arse, but even without that issue, the fact remains IT DOESN'T DO CROSSFIRE OVERCLOCKING.

use can use rivatuner to do Crossfire overclocking.

[Kai Robinson]

using CCC instead...not much point in overclocking these really, cant fit more than the reference coolers on and AS5 and fanspeeds make sod all temp difference :(

[safan80]

A new way to bypass Driver Signature in Vista 64: ATT Vista 64 loader (http://forums.guru3d.com/showthread.php?t=275261)

works great! I just had to set my antivirus to ignore the file.

[EniGmA1987]

Still cant overclock my 4870. It doesnt detect clocks right and when I try to set clocks manually it gives me a system crash

[Truckchase!]

Let Ray know; we can't fix it. Works great on my 4870.

[XSAlliN]

works great! I just had to set my antivirus to ignore the file.

Yes I know, I'm finally back to ATT. The other option like Test Mode and disabling DS at every boot we're not pleasing for my needs. As for your AV, I can assure you it's not a virus, but it interacts with ATT (hooking to it) and your AV has some Defense feature which things it shouldn't. :)