G-UNIT91
08-01-2008, 04:45 AM
HIGHLIGHTS Ybris ACS-G
It is tradition: all our waterblock are constructed in such a way as to be completely dismantled for cleaning optimal and meticulous of all parties.
Copper, brass and stainless steel (for bracket and screws) are the main components of Ybris ACS-G.
* The structure semisfere opposed has been adapted to exploit fully all the available flow from the pump and concentrarlo only where really need, or the core graphics processor.
* Speaker directly integrated into the TOP of wb, no component in plastic waterblock: This allows maximum security in the event blocking pump and allows a huge resistance to possible overheating too long.
* In the draft ACS-G the body of the speaker is carried out directly into the monoblock TOP through milling, has the task of distributing water from the first row of holes input matrix and direct it in exactly seven points clear of the matrix below.
* The union with the base allows the funnel of water and the subsequent acceleration over an area of 30 square mm side but the characteristics of this variant matrix can extend or reduce the area at will without penalties dissipation performance.
* Fixing of all components through a single Oring.
The maintenance operations are facilitated to the maximum and is not required the use of glues or sealants for the replacement of wb.
* Viterie in stainless steel 3 mm in diameter. Located at the heart of the 4 sides of wb, allow a safe and fixing a proper distribution of the load on the structure of TOP.
* Best is realized by a tile brass of the first quality 25 mm thick subsequently brought to measure 23.5 mm.
Inside place the distribution structure of the speaker that is produced by working through specific milling precision.
The adoption of a thickness high for the cover has also helped to improve the characteristics of mechanical rigidity of wb and makes it virtually shape forever.
* Basic structure of electrolytic copper pure.
The provision of semisfere was designed to ensure the best utilization of internal flows and the maximum speed scroll possible.
From a block 60x60x10 mm thick is obtained throughout the matrix, the recovery room of her seat oring and locations for mounting screws.
The base is finished then brought to final measure and corrected mirror, according to custom.
Ybris ACS-G finished, complete with fittings and springs fixing weighs about 500 g.
All parts of wb are removable and interchangeable to ensure perfect maintenance in case of need or during normal cleaning operations.
Bracket universal stainless steel 1.5 mm carried out in two variants and suitable to be mounted on all video cards last generation including the latest Nvidia cards 280GTX.
technical specifications main YBRIS A.C.S.
Base:
Material: Copper Elettrolitico from 51x51x9.0 mm
Internal Structure: matrix semisfere opposed
Manufacturing entirely through internal milling cnc
External Processing: sanding, brushing, polishing higher.
Corrigendum, lapping and polishing the fund
Closing through screws in stainless steel anticorrosion
Polishing final manual
Treatment anti-hardening and finishing PVD for a mirror effect unprecedented.
Cover:
Otto of the first quality 51x51x23, 5 mm
Manufacturing internal implemented throughout cnc milling.
Working through external cnc milling and grinding aesthetic final.
Polishing finish higher.
Treatment resistant protection and aesthetic finish PVD.
Logo Ybris and Serial Number recorded a Laser
Fixing the base unit via 4 screws in stainless steel
Connections:
Chromed brass fittings with O-ring seal for a rapid dismantling undergoing maintenance.
Filettature ¼ G
Forums internal 9 mm, 13 mm outer suit pipes from 12/17
Weight final:
WB Top Brass finished, complete with bracket and fittings: 500 g
http://www.pctunerup.com/up/results/_200808/20080801143526_1.jpg
http://www.pctunerup.com/up/results/_200808/20080801144301_2.jpg
http://www.pctunerup.com/up/results/_200808/20080801144338_3.jpg
http://www.pctunerup.com/up/results/_200808/20080801144413_4.jpg
http://www.pctunerup.com/up/results/_200808/20080801144437_5.jpg
It is tradition: all our waterblock are constructed in such a way as to be completely dismantled for cleaning optimal and meticulous of all parties.
Copper, brass and stainless steel (for bracket and screws) are the main components of Ybris ACS-G.
* The structure semisfere opposed has been adapted to exploit fully all the available flow from the pump and concentrarlo only where really need, or the core graphics processor.
* Speaker directly integrated into the TOP of wb, no component in plastic waterblock: This allows maximum security in the event blocking pump and allows a huge resistance to possible overheating too long.
* In the draft ACS-G the body of the speaker is carried out directly into the monoblock TOP through milling, has the task of distributing water from the first row of holes input matrix and direct it in exactly seven points clear of the matrix below.
* The union with the base allows the funnel of water and the subsequent acceleration over an area of 30 square mm side but the characteristics of this variant matrix can extend or reduce the area at will without penalties dissipation performance.
* Fixing of all components through a single Oring.
The maintenance operations are facilitated to the maximum and is not required the use of glues or sealants for the replacement of wb.
* Viterie in stainless steel 3 mm in diameter. Located at the heart of the 4 sides of wb, allow a safe and fixing a proper distribution of the load on the structure of TOP.
* Best is realized by a tile brass of the first quality 25 mm thick subsequently brought to measure 23.5 mm.
Inside place the distribution structure of the speaker that is produced by working through specific milling precision.
The adoption of a thickness high for the cover has also helped to improve the characteristics of mechanical rigidity of wb and makes it virtually shape forever.
* Basic structure of electrolytic copper pure.
The provision of semisfere was designed to ensure the best utilization of internal flows and the maximum speed scroll possible.
From a block 60x60x10 mm thick is obtained throughout the matrix, the recovery room of her seat oring and locations for mounting screws.
The base is finished then brought to final measure and corrected mirror, according to custom.
Ybris ACS-G finished, complete with fittings and springs fixing weighs about 500 g.
All parts of wb are removable and interchangeable to ensure perfect maintenance in case of need or during normal cleaning operations.
Bracket universal stainless steel 1.5 mm carried out in two variants and suitable to be mounted on all video cards last generation including the latest Nvidia cards 280GTX.
technical specifications main YBRIS A.C.S.
Base:
Material: Copper Elettrolitico from 51x51x9.0 mm
Internal Structure: matrix semisfere opposed
Manufacturing entirely through internal milling cnc
External Processing: sanding, brushing, polishing higher.
Corrigendum, lapping and polishing the fund
Closing through screws in stainless steel anticorrosion
Polishing final manual
Treatment anti-hardening and finishing PVD for a mirror effect unprecedented.
Cover:
Otto of the first quality 51x51x23, 5 mm
Manufacturing internal implemented throughout cnc milling.
Working through external cnc milling and grinding aesthetic final.
Polishing finish higher.
Treatment resistant protection and aesthetic finish PVD.
Logo Ybris and Serial Number recorded a Laser
Fixing the base unit via 4 screws in stainless steel
Connections:
Chromed brass fittings with O-ring seal for a rapid dismantling undergoing maintenance.
Filettature ¼ G
Forums internal 9 mm, 13 mm outer suit pipes from 12/17
Weight final:
WB Top Brass finished, complete with bracket and fittings: 500 g
http://www.pctunerup.com/up/results/_200808/20080801143526_1.jpg
http://www.pctunerup.com/up/results/_200808/20080801144301_2.jpg
http://www.pctunerup.com/up/results/_200808/20080801144338_3.jpg
http://www.pctunerup.com/up/results/_200808/20080801144413_4.jpg
http://www.pctunerup.com/up/results/_200808/20080801144437_5.jpg