View Full Version : Can this be done to my Exos-AI
rodman
07-31-2008, 08:14 PM
Could I add a sec radiator to the cooling loop? Was thinking of a Feser X-Changer 120 on the back of my rig where the rear fan is inline with the output hose on the way to my CPU and then to my GPU. Would this pose too much of a restriction? Any help on the best radiator to use would be most helpful.
Eddie3dfx
07-31-2008, 08:22 PM
can you take a picture?
rodman
07-31-2008, 08:28 PM
can you take a picture?
Basicly I would add the radiator about 6 inches after the fluid exits the back of the Exos unit. After that, the fluid would continue on the normal loop.
http://www.frozencpu.com/products/4082/ex-rad-82/Danger_Den_Black_Ice_GT_Stealth_120_X-Flow_Radiator_-_Black.html?tl=g30c95s159
What about one like this? I like how I could start at the top and exit out the bottom for a simple add in.
AC Ryan makes radiators? :confused:
Regardless, you've got an aluminum radiator. If you want to add another radiator, it's going to have to be aluminum as well, which pretty much limits you to Koolance's own offerings (Unless Innovatek/Thermaltake/other offer something).
Eddie3dfx
07-31-2008, 08:31 PM
can't you ditch the internal rad and add a gtx or mcr320??
kinghong1970
08-01-2008, 04:49 AM
can't you ditch the internal rad and add a gtx or mcr320??
yes you can but you can only align the center fan...
the fan mount spacing on the exos is diff from MCR320...
http://i44.photobucket.com/albums/f9/kinghong1970/IMG_0991.jpg
and here's my build using MCR320 inside a Koolance housing... (http://www.xtremesystems.org/forums/showthread.php?t=154349)