Lian Li top cover for radiators

[disruptfam]

I see lian now has top covers for some of there cases...

Question is what rads are they lined up for???

Looks to me there lined up for a standard 120mm fan so would have to mount fan>rad which is what most of us do anyways.They do looks nice
Hopefully they are priced well!!


here's a example

http://www.lian-li.com/v2/tw/product/T-703-b.jpg

http://www.lian-li.com/v2/tw/product/T-80B-b.jpg

http://www.lian-li.com/v2/en/product/product04.php?cl_index=2&sc_index=10&ss_index=74

[IanY]

Just an eyeball makes it obvious that's its standard 15 mm Black Ice spacing.

[Eibach]

would the T-703 fit the V2110??

and with the WCR320 rad???

if so im jumping on this right away!!!

[leo_bsb]

looks good. If the price is right I see a lot of guys buying those.

[Eddie3dfx]

very nice. I love the first one with the mesh grills.
I like the black pearl v2000 one too.

This is mine.
http://www.xtremesystems.org/forums/attachment.php?attachmentid=68153&stc=1&d=1196631352

[Movieman]

Any info on price or availability?

[lyl]

Any info on price or availability?

leave it to LL to tease for a while, doubt there will be too much info any time soon

[Movieman]

leave it to LL to tease for a while, doubt there will be too much info any time soon

Time to get a contact inside Lian Li..
maybe I should do a pic with me standing beside my G70,PC70,PC76,PC30,PC62 and the latest, a Koolance modded V2000..:D

[disruptfam]

Time to get a contact inside Lian Li..
maybe I should do a pic with me standing beside my G70,PC70,PC76,PC30,PC62 and the latest, a Koolance modded V2000..:D

go go go go go :up:

[disruptfam]

local distributor says 3-4weeks in stock :up:

[rockqc]

I wouldn't mind one of those for my PC-P80.

A dual rad in the roof without the need for modding sounds good. :yepp:


local distributor says 3-4weeks in stock :up:

Who distributes them in Aus ?

[Jupiler]

Any info on price or availability?

The top cover with a tripple radiator cut (Lian Li T-713A/B) costs 24€ over here.
Available in silver and black.

http://www.caseking.de/shop/catalog/Gehaeuse/Lian-Li/Lian-Li-Zubehoer/Lian-Li-T-713A-Top-Cover-fuer-PC-A71-silver::10794.html

[Movieman]

The top cover with a tripple radiator cut (Lian Li T-713A/B) costs 24€ over here.
Available in silver and black.

http://www.caseking.de/shop/catalog/Gehaeuse/Lian-Li/Lian-Li-Zubehoer/Lian-Li-T-713A-Top-Cover-fuer-PC-A71-silver::10794.html
Thanks pal, but with the dollar in the toilet 24 euro might equal my house value by the time they are released..:rofl:

[mussafry]

Alot of them are available on PPCS:

http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=387

I asked about the PC-P80 one weeks ago. They said they shold get it soon... Still waiting.

[Jupiler]

Thanks pal, but with the dollar in the toilet 24 euro might equal my house value by the time they are released..:rofl:

Huh? Didn't know you lived in a case. :D
Maybe the top might fit yours, so you have a roof above your head. :p:

[Koen]

It looks nice but the spacing is wrong - if you can afford a lian-li, why wouldnt you buy a thermochill...

[jonny_ftm]

I never saw a top for the V2100/V2000 series

[Logos]

I never saw a top for the V2100/V2000 series

That's what I'm was thinking of too. No top either for the 2010/2110 new series; they did the same mistake again, non interchangeable tops on these. Custom cutting and drilling required :rolleyes: What the hell are they thinking of :confused:

[jonny_ftm]

Yep, only drilling is possible on the V2x series

[Jiangxue]

I'm getting a T713B for my A71 from my local Lian Li distro.... costs $55 SGD for me over here. :D

[jcool]

It looks nice but the spacing is wrong - if you can afford a lian-li, why wouldnt you buy a thermochill...

Because a TC is just way too fat for most top-mounts.. plus I wouldn't have one due to their build "quality" :rolleyes:
Anyway, it seemed to me like these were available for some time now? Never got one (yet) but I just might ;)

[Søndergård]

Sorry for bringing the topic back from the dead, but can anyone tell me if the top will fit a TFC Feser 360 Rad?

[alacheesu]

Sorry for bringing the topic back from the dead, but can anyone tell me if the top will fit a TFC Feser 360 Rad?

No. Feser 360 has a 17mm spacing, while I believe this top is for 15mm spacing.

Edit: Somewhat unrelated, but if you have a A7010 or A7110 the top will fit, but the IO-panel on the replacement top is too small and cannot be used.

[Søndergård]

Damit! Will a 120.3 PA fit then? In that case I have to sell the TFC and me a Thermochill

[alacheesu]

Damit! Will a 120.3 PA fit then? In that case I have to sell the TFC and me a Thermochill

No, the PA is even bigger. 24,5mm spacing if I remember correctly. Your two best options are probably the MCR and GTX if you want to use that top.

[orclev]

Alot of them are available on PPCS:

http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=387

I asked about the PC-P80 one weeks ago. They said they shold get it soon... Still waiting.

FYI to anyone looking at one of these. I asked about the PC-7X tops since I've got a PC-A77 and I was hoping maybe they would fit, but no deal. It seems Lian Li has no love for modding the A77 as none of their modding components seem to fit it (other than for instance the drive bays which are used on other cases).

[T_Flight]

Anybody know if there is one available for the V2000B+II?

I have a HW Labs Black Ice Xtreme GT Gen Two.

I chose that radiator because it is more suited to my higher revving Ultra Kaze 3000's. I have a fan controller so I have the best of both worlds...high performance, but quiet when I wanna muffle them. I also chose it because they said it is easier to clean, the finish is much nicer (which it is), and it has standard hole spacing. Looks like I made a good move. :up:

[evilsponge]

I modded my top for my Lian-Li A70

scroll to bottom

https://esmedia.homeserver.com/eswater/

-sponge

[whe3ls]

will any of these fit a rocket fish?

[soulFile]

I modded my top for my Lian-Li A70

scroll to bottom

https://esmedia.homeserver.com/eswater/

-sponge

Sweet!!! Nice pics. I'm still hanging on to the fan solution cuz my CPUs (all 8 of them :P) are well within limits at full load, and water cooling is out of my $ range and expertise.

http://www.flickr.com/photos/soulfile/3044687479/sizes/l/

... but the supermicro sensors report a high system temp, possibly cuz the NB is right above the graphics card, which is cooking it.

Since this is a Lian Li PC-62 case I was looking at some of the custom top panel or side panel replacements with fan housings, but seems they're only available for standard ATX, not EATX (even though says for PC-6X cases). :( Anyone know of a custom shop that might help me out? I don't have the tools or know-how.

[MpG]

No. Feser 360 has a 17mm spacing, while I believe this top is for 15mm spacing.
Actually, Feser's moved to 15mm as well. It's just some of their first models that were 17mm. Which is why 15mm fan spacing makes a lot more sense - it gives you the options of Swiftech, HWL, and TFC rads, along with any other companies that use that particular spacing.

[The-Fox]

I bought this one from PPCS:
Lian Li Replacement Top Panel for PC-7X Cases with Triple 120mm Rad Grill Installed - Silver (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=387&products_id=22428)

It fits my Lian Li G70 like a glove, and I have equipped it with the Bitspower Radgrill.
The result is very impressive I have to say.

[soulFile]

I bought this one from PPCS:
Lian Li Replacement Top Panel for PC-7X Cases with Triple 120mm Rad Grill Installed - Silver (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=387&products_id=22428)


That might just work for me... looks like the same form factor though I think my case is 2mm deeper... if that matters. Worth a try, except all the black ones are sold out :(

[The-Fox]

soulFile,
what case do you have exactly ?
You can contact PPCS and they will answer you regarding compatibility if the panel.
I contacted them before purchasing mine and they confirmed it will fit.

[e2ek]

Can anyone point me in the direction of a stockist for this top panel (http://www.lian-li.com.tw/v2/en/product/product06.php?pr_index=303&cl_index=2&sc_index=10&ss_index=74) for the A7110B? (http://www.lian-li.com.tw/v2/en/product/product06.php?pr_index=216&cl_index=1&sc_index=25&ss_index=61)

I can't find anyone in Aust or the US that sells this replacement top.

http://www.lian-li.com.tw/v2/tw/product/T-71103-b.jpg

[alacheesu]

I can't find anyone in Aust or the US that sells this replacement top.

Lian Li are notoriously slow at releasing their new products. It tooks months before the T-703 top panel was available. What you can do is buy the T-713B. I'm 99% sure it fits the A7110 as the T-703B fit the A7010 perfectly. The only problem is the I/O panel on top which was smaller on the A71/70, but a little bit of dremelling solves that. You also need to put the PSU on the bottom, but that's not really a problem.

[[XC] Synthetickiller]

will any of these fit a rocket fish?

T-703 looks like it will fit on a rocketfish. If this is true, I'll buy one. I'd rather not cut my rocketfish if I don't have to.

I'll probably end up getting one.

Btw, I'll be using an mcr320 & 3 san aces. :up:

[Stoner133]

I've been looking at that top cover for the PC-P80 but I'm wondering what your supposted to do with the power and reset switches. I see the third opening thats smaller then the fan openings but haven't seen any switch panel that fits it. Anyone have any idea's?

[[XC] Synthetickiller]

Synthetickiller;3476260']T-703 looks like it will fit on a rocketfish. If this is true, I'll buy one. I'd rather not cut my rocketfish if I don't have to.

I'll probably end up getting one.

Btw, I'll be using an mcr320 & 3 san aces. :up:

The closest thing would be a PC-A71B. I can confirm it lol...

http://www.xtremesystems.org/forums/showpost.php?p=2836904&postcount=53

Thanks to polizei for pointing this out. :up:

[Polizei]

So who has these top panels on sale?

[Stoner133]

You can get them here: http://www.performance-pcs.com/catalog/index.php?main_page=index&zenid=f57f7eb51c5572cec185a62ebd04e5a4

Excellent service I bought my side panel with window from them.

[[XC] Synthetickiller]

Polizei found it and PM'd it to me, just never updated.

$60 seems a little steep, but for lazy people like me, it might just be a best bet kinda deal. :p:

[soulFile]

soulFile,
what case do you have exactly ?
You can contact PPCS and they will answer you regarding compatibility if the panel.
I contacted them before purchasing mine and they confirmed it will fit.

it's a Lian Li PC-62B. Basically it's just a very deep midtower for eATX boards. I have two machines using this case model, and I just like the simple elegant look, plus all the removable, slidable stuff... all things Lian Li excels at. I think I asked PPCS about a side panel which they said they didn't have, but I'll ask about the top panel.

SuperMicro sent me a beta BIOS which is supposed to give you more access / control over system temps / limits etc. I'm reluctant to install it... besides being a beta, it's just covering up the problem, not solving it.

[Aqua-Pc's]

We have some of these in stock now - the T70B and T71B with the rest on the way

LINK (http://http://www.aqua-pcs.co.uk/lian-li-case-accessories-nproducts308curpage-3-308-c.asp)

[jtdigital]

hmm... heat rises so why a top cover, wouldn't that affect the performance of the radiators. I have a lian li case but i would like to see bottom mounted radiators :p:

[The-Fox]

Why bottom or top when you can have both (http://www.xtremesystems.org/forums/showpost.php?p=3522362&postcount=14) :D

Keep an eye on my upcoming build ;)

[Snyxxx]

I bought this one from PPCS:
Lian Li Replacement Top Panel for PC-7X Cases with Triple 120mm Rad Grill Installed - Silver (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=387&products_id=22428)

It fits my Lian Li G70 like a glove, and I have equipped it with the Bitspower Radgrill.
The result is very impressive I have to say.

I assume the top holes are meant for HW Lab radiator hole spacing and NOT Thermochill radiator hole spacing? Can you please confirm. Thanks.

[Waterlogged]

hmm... heat rises so why a top cover, wouldn't that affect the performance of the radiators. I have a lian li case but i would like to see bottom mounted radiators :p:

Not this silly concept again.:rolleyes:

The heat will go where ever the air is directed in a case, even something like a Yate Loon SL running @ 5V will be enough to influence the air pattern enough to stop natural "convection"

[The-Fox]

I assume the top holes are meant for HW Lab radiator hole spacing and NOT Thermochill radiator hole spacing? Can you please confirm. Thanks.

Actually, there is no hole spacing on the panel, it's just a rectangle.
The hole spacing is in the radgrill supplied with the panel.
In this is case, yes, the hole spacing is 15mm which fits Swiftech and HW Labs rads.
I also have the bitspower radgrill and it also fits Swiftech/HW Labs.

[Snyxxx]

Actually, there is no hole spacing on the panel, it's just a rectangle.
The hole spacing is in the radgrill supplied with the panel.
In this is case, yes, the hole spacing is 15mm which fits Swiftech and HW Labs rads.
I also have the bitspower radgrill and it also fits Swiftech/HW Labs.

Thanks for that. I saw your G70 build log. Good job. I am almost done with my G70.

[Eddie3dfx]

Excellent cuts. would look nice with some cool moddersmesh.

[The-Fox]

Hey, don't insult me Eddie, it was milled not cut :rofl:
Just kidding, thanks.

I will look for a proper mesh that can be bent to have it rise above the panel in a few millimeters.
As I said, I am preparing my case to a modding contest which will take place tomorrow, so I kind of improvised with what I had in hand :p:


Thanks for that. I saw your G70 build log. Good job. I am almost done with my G70.

Thanks, its going to be wild :yepp::p:
Tonight I am going to finish everything(hopefully), there are a few "candies" which will be getting in there, stay tuned :cool:

[tinker77]

Hmmmm, soooo, anyone has any pics of these Lian Li panels installed on a rocketfish case and what model number???

[The-Fox]

What Rocketfish model ?
What is the top panel length ?

[aoch88]

Anyone knows if the triple radiator top cover would fit PC-A77 as well?

[e2ek]

Anyone knows if the triple radiator top cover would fit PC-A77 as well?

I think not. The power and reset switches are located in the top panel of an A77. There aren't any genuine Lian Li top panel with these holes.

http://www.lian-li.com/v2/en/product/product04.php?cl_index=2&sc_index=10&ss_index=74

However, it would be relatively easy to drill holes to accomodate these switches if you felt inclined. I am not sure which panels may or may not fit the A77 though :confused::confused: