need some advice for vdimm mode

[kromosto]

i decided to vdimm my p4p800 tonight and i know what to do where to solder where to read vdimm etc etc etc

but here some questions

1 can i raise vdimm when system is runnig of have to shut it down and then raise it

2 can i raise vdimm from 2.85 to 3.1 or 3.2 in 1 or 2 hours time or should i raise to something like 2.95 wait there for one day then 3.05 and so on

3 i think my hyperx can handle 3.2 by the posts i read here any other idea

thanks for your answers and wish me luck this will be mine first vdimm and i am preying not to kill my mobo

[CSOFT]

Changing the voltage while its on isn't the safest way, but it usually works, Just don't turn the VR down too much becuase sometimes they will jump the 0 and fry the board.

You can raise it as fast as you want, you could go from 2.6 to 3.1 in 5 seconds if you wanted.

Most of the time anything under 3.3V is pretty safe, but you probably already know the ram won't last as long. I would try to stay in the range of 3.00V-3.20V Just make sure you keep air moving directly over it when it starts to get hot.


-Good luck :D