Project:True kara demon: my lan wc build

[disruptfam]

Hey everyone...

Now while i wait for vincent (bitspower) to finish with those off center adapter's i need to finish my v2000 tri-loop(He quoted mid may).I decided to do a wc'ed lan build using this case...

Lian li v350

http://images.bit-tech.net/content_images/2007/10/lian-li_v350/b03.jpg

http://images.bit-tech.net/content_images/2007/10/lian-li_v350/b05.jpg

http://images.bit-tech.net/content_images/2007/10/lian-li_v350/b22.jpg

Ok....

The hardware i will be using.

e8400
asus p5e-vm hdmi m-atx
xfx 8800gt alpha dog edition
2gb g-skill 800 ram

etc etc

Watercooling,fans and air coolers

D-tek fuzion v2
mcr220 (if fits)
Feser red uv tubes
koolance 3/8 compression fittings
res- not sure yet
pump- most probably Laing ddc 3.2
(cpu loop only)

hr-05 ifx on nb
hr-07 duo on ram
zalman gpu cooler z1000
scythe s-flex 1600rpm

I have most of the hardware.Just waiting on the case to come into stock.So while i wait planning will be 1st thing on the list on things to do.

Now.I'm hoping i can fit the mcr 220 in the front where the 2 120mm fans are.Need suggestions on res and pump placement.Also not sure what res i could use in this small case.

Thoughts? :up:

[disruptfam]

Got the lan build up and running.

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc008.jpg

Now the watercooling...

Need opinions on slim profile 220 rad.That will perform decent with 60cfm fans.Mcr220 is out the question as it does not fit too wide and too long.So has to be smaller than that.Maybe a black ice pro or stealth whichever is less restrictive iirc the pro is.

Changed it up a lil bit from original plan, will be using a ek supreme acrylic.tygon 3/8 5/8 clear tubing (sleeved black,thanks Charles) and some bitspower 3/8 5/8 fittings.Haven't chosen a pump or res yet,Leaning towards a mcp355 and maybe t-line to save space.

:up::up:

i'll take some more pics tomorrow.Night at the moment so give you guys some layout ideas.

[Arni]

Swiftech res will be perfect here or something like fass-o-matic by innovatek

[disruptfam]

Swiftech res will be perfect here or something like fass-o-matic by innovatek

yes i was thinking a swiftech res,but even that is huge for this case.I'am open to ideas.

when i get my res's back i will see if i have the space for that.

[disruptfam]

What size sleeve would i need for the 3/8 5/8 tubing?Looking for something snug

[eXa]

Have u seen this build?
http://www.xtremesystems.org/forums/showthread.php?t=170564&highlight=v300

U may pick up some ideas or something from it.

[disruptfam]

Have u seen this build?
http://www.xtremesystems.org/forums/showthread.php?t=170564&highlight=v300

U may pick up some ideas or something from it.

thanks mate that will come in handy :up:

lol i posted in there also man o man i have a bad memory

[MomijiTMO]

Bahhahaha.

You couldn't resist. I'm looking forward for more updates.

[disruptfam]

Bahhahaha.

You couldn't resist. I'm looking forward for more updates.

yeah thats true :)I have most of the wc already sitting here spare so i thought why not? :D

what do you guys think of this res?

http://www.performance-pcs.com/catalog/images/products/WT_Shuttle_01.jpg

http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=318&products_id=4487

This may be the solution i'm looking for.

[MomijiTMO]

Looks pretty. Not too sure how easy it is to bleed though.

[disruptfam]

Looks pretty. Not too sure how easy it is to bleed though.

Yeah i was thinking the same thing.I need a res/pump solution that will fit in 2 drives bays.

Not the easiest thing to accomplish,I may go with a drive bay res....Maybe i'll give the bitspower res a try???

http://www.performance-pcs.com/catalog/images/products/BP-WT525P-BK_01.jpg

http://www.performance-pcs.com/catalog/images/products/BP-WT525P-BK_02.jpg

[eXa]

How about a t-line since space is an issue.

[evil-98]

man i envy you, thats a nice case..

really the mcr220 is too long? your only going to cool
the CPU right? i just dont like the stealth series all
that much. my mcr220 takes on my 360GTS Xflow easy..

i like the the thermalright, especially the NB.

i dont really like that res, looks too bulky. maybe a 3.5" bay res?

http://www.performance-pcs.com/catalog/images/products/350%20bay%20reservior%20BK_01.jpg

you could mod a bay cover to accent the res better.
or maybe even a 5.25" bay res. no wait i got it..

be back in 10 :up:

[disruptfam]

How about a t-line since space is an issue.

Yes i was thinking of something similar to what evil did....

http://evil98.insanity-asylum.com/computers/dayandnight/68.jpg

how would one go about filling bleeding this...its very short.

[evil-98]

its acctually pretty easy to bleed,

1. because the loops are soo short
2. the fillport threading is G1/4 so i just added a fitting and a foot of tubing to fill.

you know what i mean?

[disruptfam]

man i envy you, thats a nice case..

really the mcr220 is too long? your only going to cool
the CPU right? i just dont like the stealth series all
that much. my mcr220 takes on my 360GTS Xflow easy..

i like the the thermalright, especially the NB.

i dont really like that res, looks too bulky. maybe a 3.5" bay res?

http://www.performance-pcs.com/catalog/images/products/350%20bay%20reservior%20BK_01.jpg

you could mod a bay cover to accent the res better.
or maybe even a 5.25" bay res. no wait i got it..

be back in 10 :up:

Yeah i was disappointed on the mcr220 not fitting.Its too long and a tad too wide. :(

That 3.5 bay res may work also...

Ok i'll see you in ten :D

[disruptfam]

its acctually pretty easy to bleed,

1. because the loops are soo short
2. the fillport threading is G1/4 so i just added a fitting and a foot of tubing to fill.

you know what i mean?

Ahhhhh yes i get what you mean....

T-line it is then :up:

[eXa]

its acctually pretty easy to bleed,

1. because the loops are soo short
2. the fillport threading is G1/4 so i just added a fitting and a foot of tubing to fill.

you know what i mean?

Ah... thats very clever, i havent thought of that.

Edit: Oh i spot an hickup with that approach. If there still is water in the tube u added when ur done bleeding. :p:

[evil-98]

Ah... thats very clever, i havent thought of that.

Edit: Oh i spot an hickup with that approach. If there still is water in the tube u added when ur done bleeding. :p:

well i fill and bleed the loop a few times and i get spot on with the amount every time :up:

no, most of the time, yes there is going to be water left. unless you do get the right
amount. which can be achieved, but all i did was pour it out :yepp:. or you can just put
paper towels around it and just unscrew the fitting. :up:

[eXa]

Ye i know, its ways around that. Thats why i called it a hickup and not a total fail :D

[evil-98]

haha, hey sorry disruptfam kinda took longer then 10... boss
man needed something. (graphics for a center chiller plant to
cool a hotel, now if i could get one of those for my home to
cool all my machines ill be good to go)

how do you feel about cutting and fabricating? and how extravagant
do you want to get?

i think the bay res would be best right now, and im imagining a
side window which would look wicked nice.

man are you sure a mcr220 wont fit! i keep looking at it and it looks
fine! lol.

ill sketch up a few designs for you, see what you can get some ideas
from

[eXa]

What makes the mcr not fit? to long, wide or thick?

[Asgard_thor]

"Yeah i was disappointed on the mcr220 not fitting.Its too long and a tad too wide. "

[InfinityNX]

What about a GT stealth from HWlabs?

[disruptfam]

haha, hey sorry disruptfam kinda took longer then 10... boss
man needed something. (graphics for a center chiller plant to
cool a hotel, now if i could get one of those for my home to
cool all my machines ill be good to go)

how do you feel about cutting and fabricating? and how extravagant
do you want to get?

i think the bay res would be best right now, and im imagining a
side window which would look wicked nice.

man are you sure a mcr220 wont fit! i keep looking at it and it looks
fine! lol.

ill sketch up a few designs for you, see what you can get some ideas
from

Cheers evil,yeah I'm positive it will not fit without modding the case.I will be getting the panels lasercut,the two side panels with windows and the front panel with a design not sure of what yet.Still haven't decided on a build name.

Looking to see what you come up with evil :up:

[disruptfam]

What about a GT stealth from HWlabs?

I think the black ice pro is my best bet atm,It's less restrictive than a stealth.

:up:

[evil-98]

I think the black ice pro is my best bet atm,It's less restrictive than a stealth.

:up:

no you mustn't settle! :up: no seriously if you can make it work
MAKE IT WORK lol, it might be a few days before i can get you
any design, im booked at work... way too much going on. but
i got a few things running around in my head. i wish i had that
case now

[disruptfam]

no you mustn't settle! :up: no seriously if you can make it work
MAKE IT WORK lol, it might be a few days before i can get you
any design, im booked at work... way too much going on. but
i got a few things running around in my head. i wish i had that
case now

I can make it work...but like i said if would take alot of modding...But i will try !!!! :D

i took a few pics before the transition over to watercooling enjoy :)

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc047.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc050.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc054.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc061.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc062.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc071.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc070.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc068.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc066.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc056.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc055.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc049.jpg

[HaCKs]

I LOVE the sleeved SATA!

[disruptfam]

I LOVE the sleeved SATA!

cheers mate Still have to sleeve the mobo power and cpu power connectors yay! fun :( lol

You can probably notice i have no front panel or side panels atm.As i mentioned earlier.I'm getting them lasercut.

Two side panels simple lasercut windows to see internals.And design cut on the front panel.Tbh i kinda like the look of the no front panel very stealthy hehe

Now design wise for the front panel.I can get preety much any design cut.

Just need to find something that will suit

What do you guys think for the front panel design?

[Pedalmonkey]

any chance of a PA-160??

[NaeKuh]

yeah thats true :)I have most of the wc already sitting here spare so i thought why not? :D
[B]


ROFL disrupt.

I tell myself this every time i start a project, yet i always end up buying more crap. :ROTF::rofl:

if you figure out a way to escape this ever lasting loop, teach me. My h2o gear isnt shrinking each project, its growing.

[evil-98]

to be honest, that is one good looking rig to begin with.

whats the LCD for? i always wanted one, but never found
a use besides showing off to my dog (he lives next to me)

edit:

wheres the D60 :up:

[Chewbenator]

There is SO MUCH surface area in that case right now it's unbelievable. Look forward to your work, always like to see compact builds develop. Much more exciting than MM threads because you know that everything is going to fit in one of those :P

[NaeKuh]

There is SO MUCH surface area in that case right now it's unbelievable. Look forward to your work, always like to see compact builds develop. Much more exciting than MM threads because you know that everything is going to fit in one of those :P

oh boo!

you just made persephone cry! :rofl:

I personally like open benches now. DD Torture rack is uber sexy when setup clean.

[disruptfam]

any chance of a PA-160??

I'm not 100% but i doubt it.Without modding anyways


ROFL disrupt.

I tell myself this every time i start a project, yet i always end up buying more crap. :ROTF::rofl:

if you figure out a way to escape this ever lasting loop, teach me. My h2o gear isnt shrinking each project, its growing.

tbh my famed wc'ing box (cardboard box) of gear has grown considerable mysterious that...

:rofl:


to be honest, that is one good looking rig to begin with.

whats the LCD for? i always wanted one, but never found
a use besides showing off to my dog (he lives next to me)

edit:

wheres the D60 :up:

yeah it's great as is...But wcing it will make greater.I stole the lcd from the tri-loop lol,handy lil thing.Displays all my info.Temps,core utilization,fps,network status,time,date etc etc

I'm not quite understanding the dog comment :ROTF:

Also the d60 is coming next paycheck :up:


There is SO MUCH surface area in that case right now it's unbelievable. Look forward to your work, always like to see compact builds develop. Much more exciting than MM threads because you know that everything is going to fit in one of those :P

Yeah its a nice lil case!!



oh boo!

you just made persephone cry! :rofl:

I personally like open benches now. DD Torture rack is uber sexy when setup clean.

I agree torture racks can be amazing when all done up Raid's one comes to mind

More soon guys...

Also no ideas on the front panel??

I can keep it sleek and do something minor,or go hardout design..

[evil-98]

i got no one to show off to but my dog.. lol

design wise, you need to come up with a theme first
so decided on a name of some sort. since you like
akuma so much.

lets make the theme black and red and call it the

True Kara Demon

[disruptfam]

i got no one to show off to but my dog.. lol

design wise, you need to come up with a theme first
so decided on a name of some sort. since you like
akuma so much.

lets make the theme black and red and call it the

True Kara Demon

Black and red?

yeah that sounds good.

red tubing or clear tubing sleeved black?

also black fans of red led fans?

[disruptfam]

Ok after doing a bit more research looks like the bip rad will not fit too wide!!!

That only leave's me with the magicool!!??!

Width can not exceed 125mm NOOOOOOOOOOOOOOOOOO i will slept on this and try to figure something out in the morning

[evil-98]

how is that possible? pics or ban..!

i just dont understand, give me some pics
so i can think about working around it..

[skinnee]

Looking really good, I like the display as well, have a shot of it displaying temps and what not? I'm debating an alphacool LCD purchase.

evil, you're not alone...and my dog is typically un-impressed with my small feats of accomplishment/ ;)

[NaeKuh]

disrupt here is my advice bro.

get rid of that alpha cool and drop a lcd panel there. A real lcd panel.

Grab a cheapo pci videocard with svideo and use the lcd panel off that card.

If you can mod, a 5 inch touch screen would be uber sexy on that.

Anyhow CM tought me this trick. Once you get that second lcd setup, you then install a program called samurize. Its an awesome program.

Set the second LCD to extend windows, and load samurize just on that screen.

Samurize works with other programs to tell you coretemp, gpu temp, cpu speed, voltage, ANYTHING YOU BASICALLY WANT, on that little lcd screen, WITH a custom background, or custom gauges. Your imagination is the limit to what it can display. :D Totally something for you bro.

As i said true definition of SEXY!

[ultimeus]

I love watercooling v300 series thread keep it real :up:

[disruptfam]

how is that possible? pics or ban..!

i just dont understand, give me some pics
so i can think about working around it..

Pic's incoming....


Looking really good, I like the display as well, have a shot of it displaying temps and what not? I'm debating an alphacool LCD purchase.

evil, you're not alone...and my dog is typically un-impressed with my small feats of accomplishment/ ;)

Will do :up:


disrupt here is my advice bro.

get rid of that alpha cool and drop a lcd panel there. A real lcd panel.

Grab a cheapo pci videocard with svideo and use the lcd panel off that card.

If you can mod, a 5 inch touch screen would be uber sexy on that.

Anyhow CM tought me this trick. Once you get that second lcd setup, you then install a program called samurize. Its an awesome program.

Set the second LCD to extend windows, and load samurize just on that screen.

Samurize works with other programs to tell you coretemp, gpu temp, cpu speed, voltage, ANYTHING YOU BASICALLY WANT, on that little lcd screen, WITH a custom background, or custom gauges. Your imagination is the limit to what it can display. :D Totally something for you bro.

As i said true definition of SEXY!

Yeah CM told the same thing awhile back...:D where would one get a 5inch touch screen?I already have samurize.Also couldn't i just run it off my 8800gt??? I'm Running dual monitors atm with it.One extended


I love watercooling v300 series thread keep it real :up:

:D.

[NaeKuh]

Yeah CM told the same thing awhile back...:D where would one get a 5inch touch screen?I already have samurize.Also couldn't i just run it off my 8800gt??? I'm Running dual monitors atm with it.One extended



:D.

hank sells the non touch screen versions on his website. ppc.

the others you need to try fleabay. Thats the only way your going to get it for a good price without paying an arm or a leg for.

Disrupt look for car audio lcd panels also. Some of them are vsub only and are 5 inches and fairly cheap as well.

[disruptfam]

Looking really good, I like the display as well, have a shot of it displaying temps and what not? I'm debating an alphacool LCD purchase.

evil, you're not alone...and my dog is typically un-impressed with my small feats of accomplishment/ ;)

borrowed a pic off gunther for ya

http://homepage.mac.com/npasamonte/cosmos/cosmos3.jpg

[disruptfam]

hank sells the non touch screen versions on his website. ppc.

the others you need to try fleabay. Thats the only way your going to get it for a good price without paying an arm or a leg for.

Disrupt look for car audio lcd panels also. Some of them are vsub only and are 5 inches and fairly cheap as well.


thanks mate i'll look into that.whats fleabay? ebay?

[Sparky]

yeah, fleabay = ebay no idea who came up with it but whatever :lol2:

[NaeKuh]

yeah, fleabay = ebay no idea who came up with it but whatever :lol2:

cuz like a flea store you can find everything! :P

[skinnee]

borrowed a pic off gunther for ya


ty! Customizable then...nice.

[gazmtk]

The Lian Li PC350 can fit a dual rad if the million dollar pc's pictures dont decieve my eyes....
I would like to see a solution as I am about to order this case for another Media PC build

[disruptfam]

The Lian Li PC350 can fit a dual rad if the million dollar pc's pictures dont decieve my eyes....
I would like to see a solution as I am about to order this case for another Media PC build

Yeah the question is which one? look like a magicool rad to me.

[Statts]

Well, you and evil-98 have inspired me. Im going to get rid of my ATX board and move over to mATX system in the SG02-F. Going to attempt MCR220 rad and all internal. :up:

Keep up the good working, loving this build up

[rafwlkp]

I don't like AC, but this is just awesome ^^

[emoners]

disrupt: how many projects are you doing at the same time? :D anyways, i love EVERY built! :up:

[NaeKuh]

Yeah the question is which one? look like a magicool rad to me.

if worse comes to worse can you fit the 92mm hwlabs rad?

[disruptfam]

Well, you and evil-98 have inspired me. Im going to get rid of my ATX board and move over to mATX system in the SG02-F. Going to attempt MCR220 rad and all internal. :up:

Keep up the good working, loving this build up

Glad to have inspired you :D


I don't like AC, but this is just awesome ^^

cheers mate


disrupt: how many projects are you doing at the same time? :D anyways, i love EVERY built! :up:

Ummmm 2371892748912789 if i remember correctly :rofl:


if worse comes to worse can you fit the 92mm hwlabs rad?

But would a 240 magicool outperform a 92mm hwlabs rad?

I know the magicool rad will fit for sure no modding....


I have plenty of ideas floating around my head,i can picture the final build already so i know what i want to do.

Doesn't always work out the way you plan though.

Hmmmmmmmmmmmmm wonder if i should get this powder coated...

[evil-98]

dont get it powdercoated! get it anodized :up:

there has to be a way to fit the MCR220.. i have
the urge to buy a v350 just to make it work! lol
to be surprised if i get one:wasntme: anyways looks like
i might have time today.

can you get a me a few pics? i need a dead on
front shot and side shot, as parallel as possible

so your going with black and red right? im envisioning
red sleeves, red lights, black interior, red fluid,

and a few other things.

:up:

edit:

also the 184GTX would probably preform the same
as a mcr220.

[disruptfam]

Ooooh just a thought...

Having this cut into the front panel


http://i212.photobucket.com/albums/cc30/disruptfam/i250154243_23830.png

The symbol on akuma's back

And having red leds on the backside of the panel @ the bottom,with this led controller running pulsate.That would simulate a fire like in my sig :)

led controller. http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=392&products_id=23546

Evil any guides on how.....make leds? where do you get your resistors and such?

[evil-98]

Evil any guides on how.....make leds? where do you get your resistors and such?

funny you ask.. yea im currently making a nice guide for XS
so your in luck :up:

i was thinking a silhouette of this on the side panel as a
window

http://img402.imageshack.us/img402/5236/akuma1qh1.png

[disruptfam]

dont get it powdercoated! get it anodized :up:

there has to be a way to fit the MCR220.. i have
the urge to buy a v350 just to make it work! lol
to be surprised if i get one:wasntme: anyways looks like
i might have time today.

can you get a me a few pics? i need a dead on
front shot and side shot, as parallel as possible

so your going with black and red right? im envisioning
red sleeves, red lights, black interior, red fluid,

and a few other things.

:up:

edit:

also the 184GTX would probably preform the same
as a mcr220.

anodized hey not exactly sure... whats the diff?

Black exterior and interior,red or black sleeves...sleeved tubing? (maybe) or red tubing...

Red leds all over...

[disruptfam]

funny you ask.. yea im currently making a nice guide for XS
so your in luck :up:

i was thinking a silhouette of this on the side panel as a
window

http://img402.imageshack.us/img402/5236/akuma1qh1.png

yeah that sounds good!

how would i get that done exactly???

how about the front panel?

p.s i'll take them pics for you tomorrow,just got home from work and its almost 2am lol

LOOKING FORWARD TO THAT GUIDE ! :)

[evil-98]

i just got to work, its 9am lol, what the heck do you do?

[NaeKuh]

thats akuma from sfx!

dayam i loved playing that guy. he was uber cheap. :rofl:

one quarter lasted me 1 hour at the arcades when i was on that guy.

[evil-98]

but could you do the kara demon to a raging demon?!

http://www.youtube.com/watch?v=AErqKebdqjU&feature=related

[Jiangxue]

How bout laser etching the Akuma onto the acrylic and then lighting it with uv/leds? XD

(this one was done by hand though)

http://img407.imageshack.us/img407/8925/dsc01975mb7.jpg

[eXa]

thanks mate i'll look into that.whats fleabay? ebay?

I made that mistake when i first came to this forum. Everybody talked about fleabay, and i was like; wtf? fleabay?.... ye they all laughed of me.

:p:

[evil-98]

i think the etching is a bit too showy

[charles_h]

That etching is HOT.

Etching would be killer if you could conceal the lights. Evil, that illustration would be sweet!.

I too vote anodizing over PCing assuming we're talking about the outer case. LOL.

disruptfam, this project is getting me moist in bad places. :D

[ultimeus]

red anodizing inside could be really amazing. For front bay keep it clean and pure, lian li are made to be simple.

Hey charles you are moist because of doing too much shot of murderbox by 38° ^^

[Pellepel]

but could you do the kara demon to a raging demon?!

http://www.youtube.com/watch?v=AErqKebdqjU&feature=related

Ok I've done raging demon before, but whats a kara demon? from the video it looks like its a small raging demon? :confused:

But yea that guy is bad ass. Does fireball in the air, and if you pick Super Akuma he does 2 of them in the air. What a cheater :rofl:

I've read some stuff on him in wikipedia a while back; pretty interesting story line. Defeated his master etc. =p.

[evil-98]

the kara demon is just the grab, then it goes into the raging demon. lol
with out the grab the opponent can block or tech.. you cant block or
tech the kara demon. "muahahhah, muhahahahha" :up:

[disruptfam]

i just got to work, its 9am lol, what the heck do you do?

Tis the life of a crime fighting superhero... :ROTF:


thats akuma from sfx!

dayam i loved playing that guy. he was uber cheap. :rofl:

one quarter lasted me 1 hour at the arcades when i was on that guy.

Yeah akuma is my fav character


but could you do the kara demon to a raging demon?!

http://www.youtube.com/watch?v=AErqKebdqjU&feature=related

Love that oldskool joystick :D


How bout laser etching the Akuma onto the acrylic and then lighting it with uv/leds? XD

(this one was done by hand though)

http://img407.imageshack.us/img407/8925/dsc01975mb7.jpg

I will look into that remember the size of the case...If i was going to get the window laser etched it would have to be small...


I made that mistake when i first came to this forum. Everybody talked about fleabay, and i was like; wtf? fleabay?.... ye they all laughed of me.

:p:

:D.


i think the etching is a bit too showy

I agree that etching is a lil hardcore for this build.But maybe something a lil more conservative would work.


That etching is HOT.

Etching would be killer if you could conceal the lights. Evil, that illustration would be sweet!.

I too vote anodizing over PCing assuming we're talking about the outer case. LOL.

disruptfam, this project is getting me moist in bad places. :D

LOL,for the anodizing what colour would be best?

Black in and out...if so what type of black?

http://www.chilledpc.co.uk/shop/images/large/anodisecase.jpgAnodized looks pretty nice


red anodizing inside could be really amazing. For front bay keep it clean and pure, lian li are made to be simple.

Hey charles you are moist because of doing too much shot of murderbox by 38° ^^

Red hmmmmmmmm


Ok I've done raging demon before, but whats a kara demon? from the video it looks like its a small raging demon? :confused:

But yea that guy is bad ass. Does fireball in the air, and if you pick Super Akuma he does 2 of them in the air. What a cheater :rofl:

I've read some stuff on him in wikipedia a while back; pretty interesting story line. Defeated his master etc. =p.

Yeah he's has a good backstory


the kara demon is just the grab, then it goes into the raging demon. lol
with out the grab the opponent can block or tech.. you cant block or
tech the kara demon. "muahahhah, muhahahahha" :up:

:rofl:

[ultimeus]

Hey disruptfam I find the building thread of Tremeloes V350 you should find some information about his wc.

http://www.hardforum.com/showthread.php?t=1256461

Edit : he is using a MagiCool SLIM DUAL 240 Radiator

[disruptfam]

Hey disruptfam I find the building thread of Tremeloes V350 you should find some information about his wc.

http://www.hardforum.com/showthread.php?t=1256461

Edit : he is using a MagiCool SLIM DUAL 240 Radiator

Cheers yeah i thought it was a magicool,Does anyone know how magicool's perform? iirc they are fairly low restriction wise,but no thermal results

[evil-98]

that would suck if the only thing you can use was the magicool...

you definitely need to show me why other rads cant fit..

oh and i dont msn

edit:

from the looks of Tremeloes's v350 looks like anything can fit
http://i155.photobucket.com/albums/s287/Tremeloes/_MG_8883.jpg

lol the rad is held by rope!

http://www.abload.de/img/caseinnen67q.jpg

im assuming you want to mount it like this right?

http://www.abload.de/img/lian2kgn.jpg

this one looke magicooled too

http://img260.imageshack.us/img260/3226/84801927mo2.jpg

why cant you do it like this?

http://www.planetshakie.de/LianLi/Radi_drin.JPG

heres another

http://www.abload.de/img/v300horst019uwg.jpg

http://www.abload.de/img/v300horst030t54.jpg

looks like your going to have to make the MCR220 fit now :up:

[disruptfam]

evil guess what?? i think the mcr220 will fit

[lyl]

why cant you do it like this?

http://www.planetshakie.de/LianLi/Radi_drin.JPG

That one is very nicely mounted! At first, I didnt realize the fans were mounted too. Copy this one, disrupt

[NaeKuh]

lmao disrupt is bashing his forehead on his table going

DOE!

why didnt i think of that.

[disruptfam]

http://www.planetshakie.de/LianLi/Radi_drin.JPG

what size rad is that??? that wouldn't work with a mcr220 it be over the mobo!!!

[disruptfam]

OK i can confirm a mcr220 fits!!! just and its so tight that it bends the drive bays in.And I have severely scratched a new mrc220 to get it in there!!!!

:rofl:

afaik evil all those are magicool rads and are 120mm wide or just over 120mm mcr220 is 128-130mm wide..It does fit but its extremely tight and it may be too long to fit the side panels on.... i have to check

[evil-98]

well you better make it fit! :yepp::rofl::up:

yea there are magicools, if anything rise it a bit
cut the top off the fan mount and slot the holes
wait that wouldnt work, the MCR220 is thicker. hum.

make it work, you can do it :up:

edit:

magicools are 121mm which is surprising

[disruptfam]

http://www.planetshakie.de/LianLi/Radi_drin.JPG

this solution does not work hits my ram sinks and touches my gfx card

[evil-98]

dam! lol.. i need the case so i can see it.
how much clearance does it need to clear
the mcr220?

edit:
there so much clearance, surprised things get
in the way.. i understand that the gfx card is
in the way, but how much?

http://i155.photobucket.com/albums/s287/Tremeloes/v350/v350test1ql2.jpg

P5E-VM too

[nsidious]

looking good:up: