TW3X4G1800C8DF + Blackops G26

[ric9887]

Does anyone have settings to run these at 1800 on a Blackops with QX9770?

The system boots with SPD selected, at 1600 although it fails Prime95.

I get the same results entering 8,8,8,24 with everything else at auto.

Interestingly Setmem reports Performance of 7 for slot 1 and 8 for the 3. I have swapped the modules and the setting stays with the slot, although I am not sure what the setting means.

I have got them to run stable clocking down to 1333.

The system doesnt boot (error 54) with G27

Cheers, Rich

[Yellowbeard]

I get the same results entering 8,8,8,24 with everything else at auto.


Have you raised the voltage to 1.8v? You have to set it manually.

http://www.corsair.com/_datasheets/TW3X4G1800C8DF.pdf

[ric9887]

The DRAM voltage is set to 1.801V which interestingly the BIOS set for me when I checked - so I dont think its that.

[Yellowbeard]

Try setting it manually to about 1.85v or so.