Temps for slk900 w/ tornado

[Ulfar]

Im wondering what are the temps supposed to be for this setup with a amd 2500 ??? full blast and silent temps plz. And persuming everything is correctly installed.

[sandman]

with my 1700 at 1.85Vcore my idle temps with it at full blast were about 43C, at 2800rpm about 45C.

[Ulfar]

im getting some crazy temps here, idle at 50. I have an epox 8rda3+, anybody know about the temp sensors being off , or something to that matter ???

[felix88]

50c idle? how overclocked is your 2500?

i've got my XP2500 @ 2.3GHz w/1.85v, and the fan is at 3000RPM. i'm getting about 33C full load, but it's pretty cool in here.

[Ulfar]

its at stock speed.

[AMD Fan]

Thats a little high for stock speeds. Try winbond or a different
program to check temps. What is your room tempature? How is
your case ventilation? How does it do with the sidepanel taken
off?

[Ulfar]

In the evening is when i was getting the 50 idle, in the morning i was getting 48 idle.
The side of the case is off atm. When i get home im gona put in a thermometer of somekind into the case to get the case temps because mbm says its @ 35 but , i got some good ventilation in there. Also the epox 8rda3+ had a fan on the nb, and it somewhat lifts the hs, so i was thinking about taking the fan off and checking the temps then.

[AMD Fan]

Ok MBM says 35c that sounds good. Where does it say 50C in the
BIOS? What is your room temp?
I just put a Delta Fan on my CPU its a little faster temps went
down 3C which is good. After a year it was very dusty but I gave
it a quick vacumm which must have helped too. I have the same
Fan they put on a Tornado. lol

[Ulfar]

yah... got my temps down atlast w--t. It was the damned nb fan, so I took it off and it magicly took 20 c off my temps.

[AMD Fan]

I dont get it ? Did your NB fan touch your CPU fan? I have a NB
fan and heatsink it cuases no problems. I even pluged my NB fan
into my motherboard. Now my CPu fan is on a molex connector
right off the power supply.