View Full Version : Super IT7
Thanks Oppainter,I took your advice and got an IT7 and it truely is superb,Still testing but here is a couple of teasers.
Check out the memory bandwidth :D
http://homepage.ntlworld.com/ad.leach/mem243.JPG
And here is the cpuid at over 3.1gig 1.7v.
http://homepage.ntlworld.com/ad.leach/cpuid3gig.JPG
Did try for ddr500, it will boot but errors in windows.Still this is very nice.;)
The northbridge gets very hot and the ram did show some errors at this fsb but seems good at 181/241 so I'll burn in for a while here.
The cpu is a stormer and would do this speed easy air cooled at the same volts, I have got a feeling I may see 200fsb with this puppy;)
PiLsY, you have got to get a 2.26b m8, they are the business, with a prometeia they are unstopable.
Oh man.. thats really nice..
What mem is that?
btw.. i just got the IT7.. :)
i was looking into your dir... that bin mod work? ddr at 3.5v????:confused:
and the cas3 ?
ehehhe
Originally posted by UaZa
Oh man.. thats really nice..
What mem is that?
btw.. i just got the IT7.. :)
Its winbond ddr400 at 2.5,3,3,7 with enhanced off.
i was looking into your dir... that bin mod work? ddr at 3.5v???? Could you explain kind sir you have me a lttle lost here????
PiLsY
07-19-2002, 02:07 PM
Tony,
Try running for max cpu speed with tight memory timings. Done some testing today and equalled my 173 / 233 min enhance score running 181 / max timings (still at 16x multi). If you can reach about 190 you should be seeing some very nice results :).
If anything your scoring has somewhat persuaded me to go for a 2.4. My memory is nowhere near as capable as yours so im maxing out at 173/230mhz min timings (or about 195 max). Unless you reckon a 2.26 at 195mhz is feasible then I think id be better served with a higher multi @ 173mhz.
PiLsY.
I was talking about that:
http://homepage.ntlworld.com/ad.leach/modbinbd7cas1.5.JPG
http://homepage.ntlworld.com/ad.leach/ddr3.5v.JPG
btw.. nice mem you got there ;)
nice bandwidth.. hehe :)
No m8, 2.26b all the way, try some of this winbond its not to bad and still cheap at the mo.I have posted at 195fsb:eek: but didn't have the guts to go for windows, 200fsb is on the cards though;) I just have to pluck up the courage.Pack date was 02 july so it must have just got to the uk.
Originally posted by UaZa
I was talking about that:
http://homepage.ntlworld.com/ad.leach/modbinbd7cas1.5.JPG
http://homepage.ntlworld.com/ad.leach/ddr3.5v.JPG
btw.. nice mem you got there ;)
nice bandwidth.. hehe :)
I must take them grabs down ;) they have been there for a while.The bios maxes out at 3.2v but would be moddable but I do feel it would fry the ram :eek:
PiLsY
07-19-2002, 02:49 PM
Whered you get the windbond m8? Ive got a stick here somewhere (thrown away). Wouldnt even do 162mhz @ min timings. And its the second stick - the first maxed at 164 so I RMAd it thinking I got a gash stick.
This samsung did 193ish stable at max timings in my KR7a, so 200 should be on the cards on the IT7. Maybe a little less.
PiLsY.
Jupiler
07-19-2002, 02:52 PM
that's an amazing score you got there. Congrats.
Damn', seems like everybody likes the IT7.
bigtoe :
can you give some specs on the FPO/BATCH of the cpu? I've seen some 07/02/02 pack dates 2.26 in a store this week. Think they were L214Bxxx
Is that with WC?
Spot on there m8,currently at just over 3gig at 1.62v on load.It is vidpinned to 1.7v to ensure no cold boot but then set down in bios.Will test here then lower to 1.6v if all is well.
These cpu's are stunning!!:D
Originally posted by PiLsY
Whered you get the windbond m8? Ive got a stick here somewhere (thrown away). Wouldnt even do 162mhz @ min timings. And its the second stick - the first maxed at 164 so I RMAd it thinking I got a gash stick.
This samsung did 193ish stable at max timings in my KR7a, so 200 should be on the cards on the IT7. Maybe a little less.
PiLsY.
Got it from microdirect, ddr400 with winbond -5ns chips.
spaceboy
07-20-2002, 09:10 AM
Originally posted by bigtoe
Got it from microdirect, ddr400 with winbond -5ns chips.
could you tell me the serial of the chips?
(prize?)
i'm getting winbond BH 6n ,same chip of Corsair's Platinum
CSHawkeye81
07-20-2002, 01:19 PM
nice oc my man.
Originally posted by spaceboy
could you tell me the serial of the chips?
(prize?)
i'm getting winbond BH 6n ,same chip of Corsair's Platinum
That isn't ddr400 it has 6ns chips which is ddr333.The winbond I have has 5ns chips so is ddr400.
PiLsY
07-20-2002, 04:28 PM
Tony - any chance of checking out the max fsb with maxed mem timings m8? If it can go over 200 at 2/2/5/2/enhance then im sold ;).
Thx,
PiLsY.
spaceboy
07-20-2002, 07:01 PM
Originally posted by bigtoe
That isn't ddr400 it has 6ns chips which is ddr333.The winbond I have has 5ns chips so is ddr400.
yes i know!
in fact i asked you the serial of your 5n stick!
sysfailur
07-20-2002, 07:25 PM
Could you please give a link to this store you bought it from? Like an actual link to the ram page. I want a stick!!!! 243mhz!!! good gawd!
sysfailur
07-20-2002, 07:30 PM
Is this it!?
http://www.microdirect.co.uk/pricelist/memory.htm
I'm not in the UK, I wonder if they'd ship overseas...
btw.. what mem is that pc3500@pricewatch.??
any experiences with her? :D
Originally posted by sysfailur
Is this it!?
http://www.microdirect.co.uk/pricelist/memory.htm
I'm not in the UK, I wonder if they'd ship overseas...
Yes that is the ram,winbond do produce their own sticks which may be better but mine was major on third but it still clocks quite well.
Originally posted by PiLsY
Tony - any chance of checking out the max fsb with maxed mem timings m8? If it can go over 200 at 2/2/5/2/enhance then im sold ;).
Thx,
PiLsY.
just does 2,2,7,2 enhance on at 200fsb 2.9v but not much higher. Now runs 240 fsb at 2.5,3,3,7,enhance off no problem at 2.9v sisce I actively cooled the northbridge, so I may push a little further.Also as you clock the ram higher the rams efficiency goes up and im at 95% right now which is real nice.
Originally posted by spaceboy
yes i know!
in fact i asked you the serial of your 5n stick!
When I have finished testing I will have a look for you but at the moment there are fans in the way so I can't see the number.It is from the sams manufacturer that you can get the 6n sticks from as I noticed you have posted a picture of this ram.
OPPAINTER
07-21-2002, 08:14 AM
bigtoe,
Very nice setup:)
I love this IT7, I have mine on stock air right now for some Peace and Quite and I have to say this setup is ecxellent.
A little note:
My Mushkin 3000 does 198 max timings and no higher, and it isn't 100% stable at that.
Cas2, 225 using 2.98volts.
OPP
spaceboy
07-21-2002, 08:18 AM
OPP have you tried new Corsair XMS rev 2.1 Platinum?
OPPAINTER
07-21-2002, 08:30 AM
Originally posted by spaceboy
OPP have you tried new Corsair XMS rev 2.1 Platinum?
Never even heard of it:D
Got a link??
OPP
spaceboy
07-21-2002, 08:40 AM
Originally posted by OPPAINTER
Never even heard of it:D
Got a link??
OPP
rev 2.1 on 3000 and 3200 XMS
uses winbond BH 6n chips..
see my thread below..
http://65.119.30.151/productimage/20-145-413-01.JPG
newegg got it!
OPPAINTER
07-21-2002, 09:07 AM
Interesting, looks like a must test situation:D
OPP
DaGooch
07-21-2002, 09:18 AM
Originally posted by OPPAINTER
Interesting, looks like a must test situation:D
OPP
Did you hear anything back from that PC3500 shtuff?
OPPAINTER
07-21-2002, 09:21 AM
Sent e-mails to them twice and still no replies, scrubs:D
OPP
DaGooch
07-21-2002, 09:23 AM
Originally posted by OPPAINTER
Sent e-mails to them twice and still no replies, scrubs:D
OPP
I sent them 3 Emails myself and I have much worse name than scrubs for them. ;)
OPPAINTER
07-21-2002, 09:41 AM
Originally posted by spaceboy
rev 2.1 on 3000 and 3200 XMS
uses winbond BH 6n chips..
see my thread below..
http://65.119.30.151/productimage/20-145-413-01.JPG
newegg got it!
This stuff isn't even listed at Corsair, somthing smells fishy:eek:
OPP
spaceboy
07-21-2002, 09:47 AM
chect out their support forum..
RAMGUY says are good for 200mhz cas 2,better than TCB3
It will probably be way overpriced as all Corsair sticks are for the first month or two.If you can find winbond ddr400 major on 1st this is the memory to have as it apparantly will run 2,2,2,7.1t at 2.6v at 200fsb and is the ram that SiS and Via send with their sample boards.
Its only a few weeks hopefully till samsung release their ddr400 and with luck the cas2 version will be a super clocker.
sysfailur
07-21-2002, 06:47 PM
Ya know... I posted about this Corsair Platinum stuff a while back.. they've had it for a while now.
libertate
07-21-2002, 07:27 PM
Are there any state-side companies that sell the 5ns winbond stuff?
I'm nearly dead to try a stick now :toast:
Oh.. i want this memo (240ddr) :P
can someone test one and send to me one? zack? ehhaha
:D :D
CSHawkeye81
07-22-2002, 02:33 PM
i got some corsair platinum and i can get mine up to around 225 fsb with relaxed timmings.
Apparantly kingmax have a new revision ddr400 coming out which is supposed to be good, maybe worth a look.
shadco
07-22-2002, 03:35 PM
I know it's not that crazy Winbond stuff but this Samsung PC2700 does pretty well at 175 3:4 Cas 2.5 6 3 3 @ 2.8v
http://mywebpages.comcast.net/ddr333/it7/IT7175-234mem.jpg
Shad
Been playing a little:D and hit the magic 250fsb for ddr500:D
http://homepage.ntlworld.com/ad.leach/ddr502.JPG
Just started testing so stability im not sure about but nice numbers though!!
Charles Wirth
07-30-2002, 04:10 PM
Very nice, I max out at 171FSB 3:4 2.5-6-2-2 enhance on.
majormav
07-30-2002, 04:35 PM
Originally posted by FUGGER
Very nice, I max out at 171FSB 3:4 2.5-6-2-2 enhance on. enhance on how did ya manage that what mem ya using .. voltage cant get it to post using enhance on
Charles Wirth
07-30-2002, 05:18 PM
Originally posted by majormav
enhance on how did ya manage that what mem ya using .. voltage cant get it to post using enhance on
XMS 3200 @ 2.8v, I need to doublecheck bios, I might be confused with another setting besides "enhance"
majormav
07-30-2002, 05:30 PM
im using corsair xms 3200 as well at 2.8 looking forward to reply as enhance on should see a fair old mark up
majormav
08-01-2002, 07:30 AM
got some of the so called crazy winbond today ... but got work to go to so will have to play later ...hopefully it will better the corsair and get some results like big toe
if anyone wants to know chip Nos they are
22200
W942508BH-5
PCB is BDMA83A
Malecky
08-01-2002, 07:35 AM
Originally posted by OPPAINTER
bigtoe,
Very nice setup:)
I love this IT7, I have mine on stock air right now for some Peace and Quite and I have to say this setup is ecxellent.
A little note:
My Mushkin 3000 does 198 max timings and no higher, and it isn't 100% stable at that.
Cas2, 225 using 2.98volts.
OPP
Hey OPP what is wrong with my sy or RAM its weird as you say I get the same stable speed with Samsung PC2100 that means 7.5ns folks!!!! 198mhz max timings the lot... but I cant get over 200mhz with relaxed timming or none whatever. I dont get it... I should be doin 220mhz not at full timings but at least the FSB is there:)
I use the same voltage BTW...
sysfailur
08-01-2002, 07:49 AM
As we're on the topic of ram in this thread, thought I'd bring up the Corsair XMS 3200 CL2 ram. What's the skinny on this stuff? I'm not sure if it's even hit the stores yet, but thought I'd ask cus I saw the news release.
therecka
08-12-2002, 09:57 AM
i want to know where i find the memory that you guys is using.
I had my thoughts of buying ExtremeDDR but i don´t know if it´s as good as Winbond
shadco
08-12-2002, 04:30 PM
Originally posted by therecka
i want to know where i find the memory that you guys is using.
I had my thoughts of buying ExtremeDDR but i don´t know if it´s as good as Winbond
I like their memory on Via boards but the PC3200 is a complete no go on the IT7. Thier PC3000 is up to 226Mhz on my system but it's not as good as Sammy PC2700 yet which does 237.
I'm trying to sneak up on bigtoe while he's not looking. ;)
http://mywebpages.comcast.net/ddr333/it7/IT7178-234mem.jpg
Shad
sysfailur
08-13-2002, 05:39 PM
Originally posted by UaZa
Oh.. i want this memo (240ddr) :P
can someone test one and send to me one? zack? ehhaha
:D :D
Heh, I'm gonna order a few diff. chips of ram soon, keep what works best and sell the rest. :P
PiLsY
08-14-2002, 12:15 AM
Sysfailur - if you like I could find out how much postage over to you would cost and mail you out some winbond? PM me if youd like me to :).
PiLsY.
Malecky
08-14-2002, 12:34 AM
Hm... I would be interested too... but onl if it performs way better than mine. the postage to me is 32$ and I would have to pay you via western union.
Keep us informed...and show up on irc once in a while lol:p